Whats inside a GWG-1000 Triple Sensor Mudmaster G-Shock watch

Thank you for watching my unboxing & review video. Please subscribe if you would like to see more in the future!. :)
____Purchase links here guys____
Basic MUDMASTER : amzn.to/2GYcgKI
Desert Camo MUDMASTER : amzn.to/2Jb5yGt
Basic FROGMAN : amzn.to/2xmrwlr
_____Try your luck from MY SPONSOR instead____
Auction site: bit.ly/2rDCVb4
Shop site: yamato-nadesiko.link
___________________________________________________
Support to see more great contents in the future!
/ gshockhighfashion
G-Shock unboxing video playlist:
• G-SHOCK un-boxing vide...
Instagram : / gshockhighfashion
Twitter : / mythingsiz_13
Facebook : gshock high fashion
Snapchat : gshock hypebeast
For business inquiries: [e-mail]

[@hristoboiadjiev5023]

Brutal уникален имам го от 2 години няма засечка ама като гледам сега за какво става на въпрос вътре ..много ви благодаря за което

[@DanRC69]

I always thought that watch was over expensive, but having now seen this video, i can understand why it cost that much. The attention to detail and quality of parts seem very good. A really interesting video.

[@gshockhighfashion]

From my experience so far Mudmaster has the best detailed interior construction compared to other Master of G on the market. Really worth the price.

[@fahad.classic.1980]

@@gshockhighfashion. Casio GWP-1000 - GRAVITYMASTER More complexity and detail

[@MrGeirSteinar]

Owned one of these for three years, and worn it more or less everyday - needless to say I am a big fan, and loved this video!

[@aukanmeister]

This is my favourite watch for everyday outdoor use. It barely leaves my arm. Ever. Great quality! Had it for a few years.

[@mikeoreilly4020]

This was an outstanding video. I have no intention of ever trying to disassemble my GWG-2000, but to watch you do it, and to wonder at how you KNOW how to do it, is terrific. Thank you.

[@masaomieric]

Fantastic video! Extremely informative! Always wanted to know how my Mudmaster looks like from inside out!

[@ratsface2814]

That's amazing, I just ordered mine from Japan, the only downside I see at this watch are the fake screws, cause I usually like function over look.

[@mercifulone7065]

The fake screws are annoying. It's unnecessary weight without any function. Especially when ur counting ounces.

[@desireless4092]

IMHO the Mudmaster should've been full titanium body with screw back, similar to the Frogman models. At this price point I want Casio to make them uncompromisingly though like the old screw back square G - Shocks. It might drive the Mudmaster's price a bit, but it will be so worth it. It will be right up there with the GWF - D1000 Frogman.

[@doctoruttley]

Agree. I would definitely pay more for more…🤷🏻‍♂️💰💰

[@henz993]

Now it comes with the B2000 with new material as carbon and alu.

[@GermanAlicea]

Thanks for the video. Lots of detail in the mud master!

[@dparag14]

It looks so beautiful! & Such intricate parts. Absolutely brilliant Japanese engineering. !

[@theonlyredspecial]

Some of your videos are bloody brilliant my man. Thank you from Ireland !!

[@mrtopcat2]

Since the production and upload of this video, this limited camo version has gone up crazy in price. Just now, mid October 2020, I saw it on Amazon for $2500 new. I truly and very much appreciate this video and the awesome insight that comes along with it. At the same time it hurts to see this limited Mudmaster dismantled like this. But any Mudmaster really.

[@philbivins7133]

Very cool video. I would NEVER try to do this BUT I am glad you have the skill, tools and knowledge to do so. As a result of your videos, I have a greater appreciation for my MudMaster as well as my other Casio watches. I have 2 Frogman Casio, the Pro Trek and the Rangeman GPR 81000..very well done video and extremely interesting...thank you gshock

[@gshockhighfashion]

You got all the heavy hitters there. Great choice! Thanks for spending the time as well man. Much appreciated!

[@jerryg50]

I recently bought the GWG-2000. Great watch! It is nearly identical to the previous GWG-1000 from what I can see. These are great watches!

[@johnavi]

Cool demonstration. One of my best purchases ever. Something that I wear 2/3 of the year. Absolute tank of a watch. Going to order a new bezel and watch band to have a little variation for it. Although I love the Hunter Green color I have.

[@Tony-cm3qj]

The technology and machinery on these g shocks is amazing to me, and way better than most of swiss mechanical watchs which will cost couple thousands more.

[@hathaway.1166]

That's because they're meant for different purpose, they buy a Patek because they're an art form. Can't say the same about some G-Shock models. But they're high tech beasts on the wrist

[@theronwolf3296]

First I agree that a Patek is a different animal with different priorities. Cost aside it still would not survive what you can do to a G-Shock, but it represents perfection of an art form. But even within their own price range, I've found G's to be very carefully designed for durability. I also had a carbon fiber Luminox, which bills itself as a military grade watch, but when I opened it to replace a battery, it was essentially a Ronda movement suspended in a very typical way. None of the layers of protection you see in a GShock.

[@MisterCaldwell777]

I'm on my second mudmaster, and simply refuse to wear anything else BUT Gshock watches. Great video 👍!

[@theonlyredspecial]

Mudmasters are awesome. Ive got 23 of them. I can’t stop collecting them.

[@MisterCaldwell777]

@@theonlyredspecial Are you serious?!😂 You should check out the Gshock move. I just recently bought one and I love it.

[@theonlyredspecial]

@@MisterCaldwell777 yeah I’m a bit mad. Ive an nice Rolex root beer too but I love gshocks. So much fun with them.

[@MisterCaldwell777]

@@theonlyredspecial I dig your style lol. Stay blessed and healthy.

[@afistfulofpimples1745]

I refuse to wear anything but thongs, I REFUSE

[@kl5696]

Excellent video. Thank you. Hope there will be another tear down video for the GWG-2000 soon.

[@damirburic1027]

Excellent. You're the king of G-shock clocks. Done. I enjoyed seeing the ease of doing it. Casio should reward You for your efforts, and the knowledge You give selflessly to others. Good luck in further work. I love watching Your every video. Thank you for everything dear friend. Best Regards. 👍👊

[@sharkny1580]

Cleaning my mine as I watch this video!

[@kipcotter5374]

Very nice video! Love my Mudmaster!

[@jamest5149]

You should do the same with a fake mud master... now that would be interesting 🤔

[@gshockhighfashion]

Good idea. I'll hunt for one in the future I guess.

[@adrianbalagtas9451]

@@gshockhighfashion yes , I kinda wanna see what does it has inside compare to the Original

[@brucebalerion]

Yes please do it!

[@dexternuqui753]

I disected a fake GG1000 which was a perfect replica from the outside...all functions were working also. The first difference is the screws on the strap, they were not even threaded and just hold via friction...they also dont have gaskets. The second major difference is the battery, the fake uses a single CR2025, the original has two smaller batteries...then the buttons were crap on the fake...they corroded when subjected to moisture... there was also not much of a gasket on the buttons... the glass was also a clear plastic on the fake...

[@triv7252]

I love G-Shocks and this GWG-1000 in particular

[@snowcoalRC]

i have one of these and i love it! its so interesting to see what is inside

[@FaithsTekOnline]

Thank you man. Very helpful video. Subscribed!

[@Sinasi08]

Fantastic video. Thank you 😊

[@falconhawkman]

Informative and entertaining! Thank you.

[@jasonyoung8411]

Amazing video! Great work!

[@heminder]

The part you fiddled with to release the crown is called the setting lever.

[@bcnewsvideo]

I own the same watch, and was wondering how to dismantle it to change the battery. Thank you very much, great video.

[@davidpang5784]

Love your video. Thanks for sharing this video

[@gshockhighfashion]

You’re welcome! Glad to always see your comments.

[@aliakkache2151]

Many thanks for the video. I opened mine as it was fogging a bit... Now I am having an issue with the main buttons after a deep cleaning.. The 2 left are kind of stuck! When I push them nothing happed and they won’t come back to position. All the buttons of the module work fine. A help would much appreciated. Any

[@watchmestress4182]

Awesome video thanks for uploading. Nobody else has taken this watch apart. So cool to see the inside makes me realize it's worth the price.

[@swanaymondal3080]

Outstanding video sir... really really liked it 👍👍

[@kratos7678]

Just bought a Mudmaster model! Hopefully it comes in the mail soon

[@martinss1491]

Great video, super image, thank you.

[@minglee0617]

outstanding. did you dismantle the buttons? mine were "sticked" and not going back to position. would like to know if it is possible to clean

[@radx78]

Was waiting for this one

[@gshockhighfashion]

Enjoy!

[@haraldkroppmanns6827]

Hello, thank you so much for all the interesting videos! Do you have any recommendations for the great tools you are using? Thanks for a service link or info!

[@workdevice7808]

Great video. Thanks very much.

[@stephenmackey4571]

Excellent video, thanks

[@yawarmir4788]

Hi @gshock highfashion , the yellow analog arrow on top left inside the watch isn't working , any suggestion ?

[@stevepodraza6363]

Great vid! Where can I get a new sapphire glass? Mine is cracked

[@FrankLavoy]

Hey ... I know this is a couple of year late but ... when you reassemble a watch, do you clean the components? If so, with what? This was really interesting. Thanks for sharing.

[@michael_mouse]

.... excellent video... subbed!

[@gplayer01]

This is a great tear down of the GWG-1000!! One question, I have a used GWG-1000-1a and the back plate has 2 numbers as compared to many I see with 1 serial number. Is one set a batch number and the other set the serial number? Many Thx 🙏

[@christophercorado4890]

I appreciate this video, I own this so very informative

[@daz.r1994]

Did they put that module together by hand. My last casio last 22 years the metal strap broke last year. So i got the Mudmaster GWG 2000. It's a great watch for bush craft.

[@frankjaath1623]

Can you put the gprb1000 case and function into the gg1000 cable frame?

[@GunnerAFC]

Thanks great to see all that.

[@gshockhighfashion]

You’re welcome!

[@xelonk]

really nice one, while i wonder how to remove the strap/band on gba-800, maybe later you can show us, as it has new style of strap then other gshock.... thanks man

[@KonstantinosTsagkalidis]

Fantastic video

[@chanwah5048]

Great tutorial video for the GWG Mudmaster collector. Will you make a video on the latest GWG2000 assembly? Keep it up.. thank yo.

[@yuridaman]

Do you have a link to buy the gaskets and batteries? Is there a kit? I've been using my gwg 1000 1a for 5 years and my band has just failed. I've ordered a new band and bezel. I might as well refresh everything while it's apart.

[@2loco]

Bro you got some balls lol. Id be terrified just to replace the bands, let alone pull the back cover off. 🤣🤣 you got all my respect. 👏👏

[@petra7707]

Hello - I am asking for advice - I wanted to replace the bezel in my 4-year-old GWG and clean it. After removing the bezel, the plate with holes protecting the sensor was very dirty, so I unscrewed it and cleaned it. Rather, I correctly attached the round bezel to the sensor and screwed on both plates. Then I sealed the plate with the sensor hole with a piece of insulating tape and started cleaning the clock with a soft brush with a little water and soap. After washing and drying the watch, I peeled off the insulating tape under which it was dry so no water got into the sensor. However, when checking it, it turned out that after turning on the barometer, thermometer and altimeter, an error appears. I thought that maybe I screwed the badges on the sensor wrong, but trying again did not help. The sensor itself was not moved, only after removing the plates it was dry - inside it is like a sponge or a membrane that was wet, maybe drying it caused, or maybe sticking the plate with the holes with tape. Maybe it is possible to reset the watch by removing the battery. I would rather not do it myself, and maybe there is some other way - thank you in advance for any tip.

[@panhienomorales2751]

Hi. How change glass in gg-1000?. It is not fully shown here

[@thorstenschneider70]

Nice Video- Thank you so much ;-)

[@bc6806]

Does the new gwg2000 have Alpha gel? It doesn’t say vibration resistant

[@frankschroth4038]

Hello, I was wondering if you could make a video on how to change the polarisation of the display on that GWG-1000 . I really have that negative display on my GWG1000 and want to change the polarity of the display on mine. Can you make a tutorial on how to disassemble the display on the gwg-1000? Greetings from Germany Frank S.

[@MarcSLO]

My watch is not worn a lot and it's only a few months old. Two of the buttons are not springing back when pressed and you have to press hard to even work, what's wrong with the buttons? Do I have to RMA the watch?

[@zizLB]

Hey man.. i did everything just like u said.. but when in the end i get ERR when trying to use baro temo alti.. can u help me plz.. i dont want to lose my mudmaster .. thank you

[@DarrenWellhoefer]

Have you ever painted the hands your own custom color? Seems like it would be a great addition.

[@cnnlt200]

Love your vids. Just curious where the crown is sealing on the watch. I mean should you really tighten it. Or are there 2 o rings on the crown axle for sealing.

[@gshockhighfashion]

kzbin.info/www/bejne/d5PYpoarj6uiedU Check this new disassembly video. I talked and break it down. It'll help.

[@tivikemajom]

Very good video, shows how much effort and work you put into your videos. Keep it up, +1 from me.

[@gshockhighfashion]

Thank you very much sir for noticing the efforts!

[@michaelgough8951]

That's definitely fake

[@rickomuerte992]

nice job!👍

[@michaelcaine520]

Hello men, great and most importantly very useful video you do! respect! please tell me where you can find, order or purchase a module for watches? I have a prg - 80, but the bottom module burned out on them (by the way, I decided to make out after your video), how could this happen - I can not imagine !? Thank you.

[@gshockhighfashion]

Glad to know this was helpful, thank you very much for watching!. About watch parts, I usually bought a used model for cheap and scrap for parts instead of getting a new parts. Casio will charge you quite a lot for any interior parts especially the engine, might go around 100-150usd even if they have it in stock. 😬🙏🙏

[@stephenm5000]

Balls of steel buddy, balls of steel! Excellent video, even the music which usually irritates the hell out of me was well chosen.

[@flfl186]

Very interesting. Thank you

[@santafe8440]

The original don’t use batteries

[@williamdester5394]

Very nice vid! Anyone know the size of the smd led at 6 o clock?

[@TITAN3084]

Is this Mudmaster (or GWG 2000) still water resistant with the crown screwed (not pulled) out?

[@briandischinger1479]

I know you did this video a while back, I was wondering if you have ever disassembled one of the sealed buttons on this watch, I have been having a fogging issue for awhile and haven’t found anybody having the same issue, but have been scared to disassemble to try to remedy the issue... any advice would be greatly appreciated.

[@kamrankeeb]

Remove the case back and lube the o ring, it should help. I had the same problem with my mudman and that seemed to help.

[@mouadtoumi7155]

Beautiful video

[@houari-sayad]

hello, what kind of camera are you using?

[@jamess8175]

You are a skilled watchmaker!

[@gshockhighfashion]

I appreciate that sir. Thank you!

[@jamess8175]

@@gshockhighfashion Keep up the good work, sir!

[@chinmomo3854]

Bro, my mud master inside have fog do you know how to fix it?

[@tinkertom3683]

Does the gwg 2000 have the gel inside??

[@billcosgrave6232]

Puts a Rolex to shame!

[@joemat4035]

You are comparing serious watch and the plastic toy. Thats a shame :)

[@yorusuyasoul69420]

Seiko is the best fuck rolex

[@yorusuyasoul69420]

Seiko is the best fuck rolex

[@desireless4092]

@@joemat4035 *Frogman has entered the chat*

[@sorinichim4737]

Really! Rolex always win at all levels! This is just a joke, not a watch! At least Rolex gives you real value for the money you spent ( great movement, fine details and perfect materials from wich is build of) A Gshock is just a plastic toy compared to a rolex watch.

[@paullowe2906]

Amazing video and so interesting 👌 and casio is the best

[@b.jansen1921]

after opening and closing my mudmaster I tried to "reset"it but it keeps telling me that it's still "open". did I do something rong? Any advice??

[@hooligan-6958]

The watch hands after hand adjust stop at 5:50 and not 12.00 also the mode hand is out by 2 marks, so the analogue and digital are out by 6 hours 10 mins and the mode hand never shows end correct mode. I’ve tried everything to correct it, any suggestions or is it gong to need a new module ?

[@basitxe2]

I have the Casio Mudmaster gwg 1000 1a3 triple sensor, unfortunately the crown is broken and the warranty period is over 😥. any idea where i can buy the crown only please ?

[@3000spills]

I'm wearing that model right now and i'm clutching it while i watch this video

[@gshockhighfashion]

Maybe I should've disassemble it entirely instead. Thanks for watching my older videos as well!

[@Uborshik_mixXx]

Thank you !!! 👍👍👍

[@gshockhighfashion]

You’re welcome!

[@adrianbalagtas9451]

It Would be awesome if they made a Baby G like version Of Gwg-1000, 😍 smaller version and can be a Couple watch ,

[@asylbeky6840]

Do you think that mudmaster engine can fit the case of gravity master?

[@tinetales-v.0217]

Is the glass of gg-b100 and this watch the same size?

[@andreanicolas9363]

Great review!~ thanks very helpfull! Casio should pay you for free but anyway i understand it's your passion! :)

[@yaddi3434]

I wish the desert came wasn't discontinued and over $1500 now if you can find one. I want one.

[@0nionz]

Hey, Do you think its possible to do a case swap? putting the GGB100 Module in the GWG 1000 casing?

[@gshockhighfashion]

Interesting idea. I doubt it though but I'll give it a shot anyway.

[@gshockhighfashion]

Interesting idea. I doubt it though but I'll give it a shot anyway.

[@franciscotlapancocana300]

Good morning g warriors .....blessings

[@SuvayanGhosh-zm7wf]

What is the botton and backcover material of Casio G Sock GDG 2000 and GDG 1000 are they titanium or Steel?

[@gshockhighfashion]

Both of them are just stainless steel. Look for gulfman if you want titanium back.

[@nico4132]

Whats the size of that green screwdriver?

[@user-fu7tl5jj2m]

Thank you ❤

[@gshockhighfashion]

Welcome!

[@JRcheesburger]

can you do one where you take aprt the gulfmaster gwn-q1000

[@gshockhighfashion]

I will for sure. Will be out soon!

[@Dude_Virus]

There are a few reports of sticky buttons and moisture getting in this model. Is it a common problem with the model? Or is it happening to those users who purposely abuse the watch. The gwg 1000, 2000 and B 1000 are on my shortlist so want to check before I pull the trigger. My use case would be wearing the watch 24x7 all year round and I just use 1 watch. Watch stays on even while bathing.

[@harpomarx7777]

For all the screws and pins in the straps ... if the single spring bar in the buckle fails, you drop the watch. Should have been a continuous buckle ... what were they thinking?

[@gshockhighfashion]

You need a break point on a watch for safety purposes. Just in case it got stuck somewhere. Often times they choose the buckle which is the cheapest to fix/replace. Regardless, when you wrap the watch on wrist, it integrated together better thus stronger

[@simoncrawford350]

Love your work & thanks for sharing (obviously not worried about your warranty 🤔👍) Cheers 🍻 Ps: is the Gulfmaster next?

[@gshockhighfashion]

I don’t think this would affect the warranty. The warranty is already expired anyway. I’m good.

[@simoncrawford350]

gshock highfashion I think by now, you could be an Authorised repairer!!👍

[@StardustLegacyFighter]

Can you please do the same teardown video for the GWG-2000? I'm curious to see how it compares to the original.

[@gshockhighfashion]

For sure, coming up next!

[@davidacpyehuda]

Hello, at 4:20 you described the 4 decorative pins, is it inserted tightly? Is there a danger that it might fall off when im using the watch in harsh environment?

[@gshockhighfashion]

The pin is incredibly hard to be removed. It would be a nice exercise if you would try to remove it yourself, that could gives a better idea of hard the process is and thus the confidence to wear in harsh environment. Regardless, I doubt that pins will came out while wearing the watch at all without breaking the bezel first. Besides even the pins have guards around it.

[@davidacpyehuda]

@@gshockhighfashion Thank you very much for your response! I can wear mine with confidence now and not worry about it falling off :-)