GT3 Carbon Ceramic brakes on my RWB 964 Turbo Porsche 911?

Will GT3 PCCB carbon-ceramic brakes fit my 964 Turbo? Well, we won't know that until later, but for now I can at least see if my wheels will fit over them. So Al brings his 996GT3 into work so I can try my wheels on it. His 996.2 GT3 originally had PCCB brakes & he's converted to steel discs.
►Als Bugatti top speed film • How we filmed a Bugatt...
►The complete playlist of all my 964 Turbo videos • Driftworks Porsche 964...
►Subscribe for more! bit.ly/2k6oBqh
►Follow @PhilMorrisonDW & @driftworks on Instagram
►Did you know we have a gigantic online wheel and suspension shop?
►www.driftworks.com/

[@brentspang9092]

I can't believe I just watched 28 minutes of Phil changing two wheels lol!

[@driftworks]

And chatting sheeeet with Alan 😄

[@AlistairClark]

Finally giving the people the content they deserve. :D

[@MrLOZZA6451]

And boy was it great 🙊👌👌

[@Thedmcke3]

"Wheels are gettin a bit dusty. Better throw em out for some carbon jobbies." Seems reasonable. I love this channel lol

[@driftworks]

I do of course fully appreciate it's ridiculously extravagant 😂

[@Thedmcke3]

@@driftworks we all would if we could. Keep it up haha

[@austingreen6042]

@@driftworks "Rough World Problems" 😂

[@ericn7698]

I chuckled at how gingerly Phil removed and mounted the wheels on Al's car. That shows respect for another enthusiast's pride and joy.

[@timburton1080]

Yeah, even though the chip prone discs are gone

[@vp5]

@@timburton1080 he did say calipers

[@driftworks]

I hate working on other peoples cars.

[@conorkelly8]

"I can stop anytime I like" ==> Phils bank account 😭😭😭

[@driftworks]

😄

[@djchriscarey]

Know the driftworks brand years. Only found the KZbin channel recently. Been hooked since. Unreal content 👌

[@driftworks]

Cheers Chris & welcome to the channel 👍

[@simonhaycocks]

Other way round for me! 🥴

[@markchip1]

"This is Al, he works in the office upstairs." - (stares at screen...) You mean on the roof???

[@driftworks]

We have two buildings. The one we're in is for wasting money, the one next door is for making money.

[@daveedwards3531]

Driftworks that’s where I’m going wrong, I only have a wasting money room!

[@markchip1]

@@driftworks - Lol! It's called "humour", guys!

[@daveedwards3531]

Mark Chippendale “thanks” , Mark!

[@Matt09pearce]

I love Al's gt3 and i love even more that he actually puts miles on it.

[@driftworks]

Yep, although he's done less since he got all fancy with E88s and corrected paintwork. Oh and since buying an awesome NSX too!

[@Matty.Hill_87]

Not driving you car is like not shagging your wife to keep her tight for her next fella 🤷‍♂️🤣

[@StellarGale]

That's how you do with GT3

[@AlistairClark]

Haha I did correct the paint but immediately f**ked it on a 2500-mile road trip across Europe. Ahhhhhhh

[@andypresland]

Chuckling away when you talk about old cars! Loved the track videos and the sounds of that 996 😍

[@driftworks]

🤘Thanks man!

[@Jamierintoul]

Can’t wait to see the carbon ceramics going on great content thanks for keeping me sane through the lockdown

[@driftworks]

No problem 👍

[@lukekindred1999]

Love Al, hes such a sound guy. We definitely need more of him and his NSX

[@driftworks]

Yeah we need to do an episode on the NSX for sure.

[@kenrossaukrsa]

What a Cool guy Al is .. (imo the 325i E30 2.7 and cam mod using a good sports exhaust system is also one the best sounding car made)

[@driftworks]

😎

[@rab..]

From mountain biking , snowboarding , driving and riding motorbikes , if there's one thing I've learned, you never utter the words "last run" it's bad Juju! 😂😂😂

[@driftworks]

Yep... Bad Juju!

[@1jzfc999]

You not getting carried away has kept me entertained for years 😂😂

[@driftworks]

😄

[@MrRyanTrott]

Great watch as always chaps. Love living through your ruinous purchases Phil.

[@driftworks]

Thanks man 😄

[@mortenmega]

Enjoyable video...more Al please :) Brings me to miss the days at Hotel Burgstube's bar

[@driftworks]

🤘

[@HarveyJohnWillmott]

Great episode. That GT3 is 👌

[@driftworks]

👍Thanks man!

[@barfmeister8509]

Aye, Al can pedal alright! Overtook me in full drift mode in thisGT3 at the ring closely followed by Bon in the 996tt again in full drift mode😳 At that point I probably shoulda packed up and gone home😂 Can’t wait for the vid following the PCCB purchase 👍

[@driftworks]

Haha, should have just tagged on the end of the drift train 😄

[@barfmeister8509]

Driftworks I was on about my 4th ever lap 😳 DN10

[@ShedLife]

Yes, Al behind the camera again haha. Bring back Al! 👌

[@driftworks]

🤘

[@mrmoss149]

" and try not to get TOO carried away" "Well- that's not happening". LMAO. Again. Love it. Nothing like mates to keep it real. Awesome

[@driftworks]

Haha 😄

[@fastflyer666]

If we could collectively persuade Al to sell me his GT3 that would be great. I’ve failed miserably to convince him so far.

[@driftworks]

Haha, I doubt that car will ever go anywhere.

[@OUTRUNFILMS]

MINE

[@RyanHeath85]

Seeing those track clips reminded me... Awesomefest 2 would be amazing! 😁 I loved Al's video of the first one. Any chance of it happening again?

[@driftworks]

None at the moment unfortunately.

[@Ali4994]

One of my favourite 'porsches can't drift' videos is the one of Bon ripping an absolute steamer out of luffield in his spicy turbo. Always a pleasure (and never a surprise) to see him with his foot down...

[@driftworks]

Yeah, I'm sure I'll find an excuse to put that in a future vid somewhere 😎

[@natemallory9141]

I just subscribed. Really enjoying the content in America👍🏾

[@driftworks]

Thanks Nate, welcome to the channel 👍

[@TomChame]

Very neat!

[@driftworks]

Thanks! 👍

[@spazda_mx5]

"oh it's you" and "you've spoiled it for everyone", sayings that have rung in my ears my whole life.

[@driftworks]

🤓

[@Kortec_Racing]

Gonna enjoy this

[@driftworks]

👍

[@mrmoss149]

" Good ol' Ash...What a legend". LMFAO

[@driftworks]

😄

[@MrLOZZA6451]

“Chundered EVERYWHEREEEE!” 🤣

[@driftworks]

😄

[@neilstewart1208]

Skip the last lap is the law! car or bike ha ha! Love the early gt3 , sound ace.

[@driftworks]

🤘

[@FeeeshEP3]

Love the look of those E88 on the 996!

[@driftworks]

They are so nice!

[@danielwarren539]

Can you do an episode on every car you currently own? Little update on each where they’re at, plans for them, favourites... just an idea for a cool video 👍

[@driftworks]

I was thinking I'm probably over due one of these.

[@jongararjorundsson3345]

The 996 Gt3 is aging gracefully. Lovely looking car on the e88 wheels.

[@driftworks]

Indeed, it's never been the looker with those headlights, but the have grown on me too.

[@rstaaron]

Have the same superstition with the 'one last go', if I ever catch myself or any friends saying it, that's it. Time to stop and go home 😂

[@driftworks]

😄Yep, pack your stuff! We're going! 😂

[@seanleach123able]

Set for all your videos to come up on my notifications and watch them all you and jay are brilliant to watch. Ps when will your black hat with small dw in orange be back in stock i need one 🙈

[@driftworks]

I know I need one too! I'll kick Starkey as I'm pretty sure he thinks no-one wants the small logo hats. I love them.

[@seanleach123able]

@@driftworks yeah the small logo looks awsome

[@lolacaitlin]

I hope you managed to get the brakes, I'm looking forward to part two now. 👍

[@driftworks]

Cheers 👍

[@Porsche9174Ever]

These are the best conversations :) Makes me want to upgrade my stock 996 C2 brakes as well. Besides my driving skills, they are the weakest part of the car. Rock solid pedal and not enough braking performance when chasing more modern cars.

[@driftworks]

Thanks man! Yeah, that doesn't sound ideal!

[@mickgrimes9078]

outsiders is how i found your page years ago. ive watched a bunch of times too lol so much love for the boso dudes.

[@StellarGale]

Outsiders is what hooked me up on drifting pretty much

[@driftworks]

🤘One of the best things we've ever done! 😎

[@ecarasig]

Mr. Al is a BALLER to run Magnesium E88's on track days/hoon days! My dream wheels...and dream cars all in one video. So GOOD! Only you Phil can mod a perfectly modded car and make it better. PCCB on a RW porsche??? This is may be the most capable track RW in existence. I feel you about the dust though, I had polishied lips on my BBS LM's and I was cleaning them after every drive. With the clear coat gone I had to be obsessive. Truly annoying and I was nervous that if I didn't clean it the lips would just corrode. I like Al's commentary with you its what car guys want to listen in on. Were you trying to pass Al on that track day? 996 GT3 and driver mod is definitely a slept on setup these days with the 997's and 991's so effortlessly capable.

[@driftworks]

They are aluminium. I'm not sure you can still get the magnesium ones. Thanks man.

[@ecarasig]

@@driftworks Didn't know this...wow that makes the magnesiums worth mad $$$$. Good to know thanks!

[@yatty1673]

Oh man I love that black 996 GT3 - I noticed the Manthey Racing sticker on the rear side window, please can you tell us more about the spec?

[@driftworks]

It's quite a simple setup (that works really well) Manthey KW V3 & alignment & it's on Cup2 tyres.

[@yatty1673]

@@driftworks Thank you very much, Manthey racing built an ultimate spec 996 gt3 for a customer approved by porsche it was 4.2l monster kzbin.info/www/bejne/qIStfX6EZZmnmZY . I love the work you have done on your 964 Turbo and adore the Riviera 997 GT3 you have.

[@JamesWNL]

Funny. Ash never mentions about his chunderthon 😄

[@driftworks]

He's a professional driver now. He has to watch his rep 😄

[@jamest5149]

Do it! I put PCCB on my e60 m5 and had them on my GT3 👍

[@driftworks]

🤘

[@64nine]

When ur 4/5 thru the day and 100% fine... pack up haha 👌🤣😂

[@driftworks]

👍

[@PabloConcrete]

Alan seems like a top guy!

[@driftworks]

He certainly is!

[@AdeReeves]

Part two....How i sold my house to fund the new brakes 😂

[@driftworks]

😄

[@lloydjohnston8227]

wheel weights could become a clearance issue with the caliper part that the pad retaining pin goes through in future, especially when tyres are changed and need rebalancing. I learned this the hard way with a BBK haha

[@driftworks]

Yeah, I've been there too!

[@Kresnov]

Hi Al nice to see you the other side of the camera for a change.

[@driftworks]

👍

[@WelcomeToTheMadness]

The attention to detail in putting on some wheels, that's all that should be needed to say here.

[@driftworks]

👍

[@michaelmurphy2417]

Sorry if I’ve missed it but Are you going to have to change the complete hub assembly as the the gt3 calipers are mounted behind the axle and the turbo calipers are mounted in front of the axel.

[@driftworks]

We'll see. I haven't got that far 😄. Making adapters shouldn't be too difficult & it should be possible to swap the link pipe & bleed nipples around if the leading pistons in the calipers are different sizes.

[@toddaikman3259]

When’s the next episode of Al eats. Haven’t seen another one since train squid on the outsiders haha

[@driftworks]

😄

[@omarcominhayyo8180]

That silverstone one. I can’t blame you for that. the car was asking for it.

[@driftworks]

😄

[@247Track]

Al Car handles amazing well and is a hoot to drive.

[@driftworks]

It really does! Plus he's handy behind the wheel too!

[@247Track]

Driftworks that is also very true Alan is a very talented driver. I wonder when he will let me drive it again.

[@matthewhoar2685]

You know your cars wide when front wheels get mistaken for rears 😂

[@driftworks]

😄

[@Ricky-cl5bu]

Class 911

[@driftworks]

Thanks!

[@clodola1]

Pirelli P ZERO™ CORSA SYSTEM combines directional (front axle fitment) and asymmetric (rear axle fitment or all-round application) , might be worth looking into

[@driftworks]

Thanks! I didn't know that's what Corsa System was!

[@be4tb0x]

love the sideway scene of the 991. He tried to drive an a responsible manner, then the car got slightly sideways accidently. Next reaction: f*ck it, go fully sideways.

[@driftworks]

🤘Thanks man.

[@Diogocabreira12]

People: porsche’s can’t drift Phill: Hold my beer

[@driftworks]

😄

[@jlynndo]

for so far as i know these brakes you want to get for the porsche will not be a difficult thing to fit on your porsche. its only the cost for the whole set , it is a pretty penny you might say. still it would be a fantastic. it is like vw. if you puzzle it good out it has to work. can wait for the next video .

[@driftworks]

👍fitting them is the next part of the puzzle.

[@salvare0004]

Is it uncommon for cars to lift both sides at once with the rear jacking point? Most of my cars have done that. My old 2003 JDM WRX struggled but managed, The old VX220 definitely did it (Lotus chassis yo!) and the GT86 does it really well although i'm pretty sure they're pretty stiff chassis themselves.

[@driftworks]

It's not that specifically, it's how rigid it is 👍

[@salvare0004]

@@driftworks ah fair enough, a good rigid chassis goes a long way! My little Vx220 was a weapon on track, great fun but an expensive hobby when you don't do them very often.

[@gavin4ford]

12:00 now that's a good time in a car.

[@driftworks]

Such a good car!

[@marcjensen1724]

Whats with the weird spots (looks like... small indents?) on the rotor surface? Warped? Or is that wear pattern nomal for massive ventilated discs?

[@driftworks]

On my discs? It's where the grooves used to be. In about 2000 miles road use they've been eaten by the horrible pads.

[@hevendranarayansamy2793]

Phil those calipers would look awesome on your 964. I know it's not the reason you changing em. But just saying. Also have you looked into ceramic coating or waxing the wheels? I'm not expect but I've heard that they stay clean after ceramic coating.

[@driftworks]

Thanks. Yeah I've done all of that multiple times. They are currently coated in two coats of Carbon Collective ceramic wheel seal.

[@jamest5149]

Al needs one or two of the wheel alignment studs if he isn’t putting a stud kit on his GT3, makes fitting wheels and not damaging the discs a breeze 👍

[@driftworks]

He needs to stud convert it really. It's so much better!

[@chocolateteaspoon]

Could you do a weight comparison if/when you get the carbons?

[@driftworks]

Yeah I'm sure I'll do that 👍

[@jayenn2481]

Brembo makes carbon ceramic replacement rotor rings & pads for the race kits - its very likely the replacements exist for what you have; call them and they can probably get you sorted for less than a used gt3 ceramic kit and then you wont end up having to use painted calipers that come with dust boots... best of luck!

[@driftworks]

I did think about going that way, but the brakes are currently so biased I'd really like to get a properly balanced front and rear setup without having to have a bias valve. The front's lock up really hard currently.

[@anidiotinaracingcar4874]

That might be smart (but who am I to say that!) to try a couple of new pads first. I've got very little dust with my EBC pads on stock discs, for instance

[@driftworks]

I know there are low dust pads. But they are generally lethal when driving fast or on track and I'm not after low dust, I'm after no dust 👍

[@anidiotinaracingcar4874]

@@driftworks The EBC redstuff or yellowstuff will stand heavy use but yeah, no dust is even better.

[@jonllloyd]

You should consider widening the front track by swapping to 993 front subframes. Should help handling issues.

[@driftworks]

I didn't know the 993 frame was wider. Which parts make it wider? The frame itself or the front lower arms?

[@jonllloyd]

@@driftworks The castings each side that the lower arms mount to make them wider. You might be able tell by looking at this 282354356972 on eBay. Look how much the tabs that the arms mount to stick out compare to yours. Otherwise identical.

[@driftworks]

Interesting, so what other parts would be needed to convert it to wide track using these?

[@jonllloyd]

You might have to extend the track rod if you run out of adjustment. Otherwise no other parts.

[@TougeTouring]

Im able to jack up my E46 330i Touring the same way 😅 KW V3s + H&R Swaybars ❤

[@driftworks]

Nice! 😎

[@AmanJandu]

My EP3 and FK2 Type R's do that stock 😆 Surprised myself!

[@mpwr321bhp]

Could you use some pegs (whats ever they are called) to locate/slide the wheels back on and off if you don't have studs, especially useful when working with ceramic discs so you can slide the wheels off without dropping them onto the disc and cracking them ;0)

[@driftworks]

He needs a stud conversion. I already have a stud conversion on mine. I do it on most of my cars, I hate wheelbolts.

[@D1rtyDubstep]

Phil have you tried speaking to Dan at Wheel_unique for the lips for the ACS's?

[@driftworks]

I've got it sorted now. Cheers 👍

[@rakmal7868]

Hey Phil loving the videos you checked out savage garages new build?

[@driftworks]

Thanks. A couple of people have shown me his Murcie plans yeah.

[@zanttu23]

is the gt3 setuped by Manthey racing, saw a sticker on the car?

[@driftworks]

Yeah it's on Manthey KW V3 and Al had it all setup by them a couple of years ago. The car is ridiculously quick for a relatively simple recipe.

[@mrmoss149]

" If your car is in the same shape as when you started- Stop". How true.

[@driftworks]

🤘

[@lb9gta307]

As much tracking as he does with that GT3 I'm surprised he didn't do a wheel stud conversion

[@driftworks]

He doesn't have to do much taking wheels off. He should do it though. It makes life so much easier.

[@ChihabJebbari]

17:06 Phil's smile when he said "I can do 10 mm!" 😁

[@driftworks]

😄

[@TAG247]

Yes!

[@driftworks]

🤘

[@SH3RIFF187]

Where did you get the plastic car covers? Would like some for my car in the shed to keep the dust off.

[@driftworks]

It's just 3m sheet you buy in a roll.

[@SH3RIFF187]

Driftworks Great, thank you for the reply

[@mk3whitewide]

Cloth gt3 seats are the coolest.

[@driftworks]

🤘

[@ziomel105]

That remind me Outsiders 2 when? (Its half joke half true question lol)

[@driftworks]

😄

[@samseekings5031]

We all need Outsiders 2 :D

[@BIRVS]

Done the one last lap before on my bike when my mate gave me some more petrol, snapped my leg in half 😂

[@driftworks]

😬Damn!

[@omarcominhayyo8180]

Ouch 😣

[@projetosdepobre8773]

Where can I buy ceramic discs for Porsche 911 ? I'm from Brazil, thanks

[@driftworks]

I just gathered the bits through Ebay. It is a bit risky buying used CCB though as they are easy to damage and hard to to see if they are worn out sometimes.

[@tomtht3355]

Unsprung weight can only be your friend 👍🏻

[@driftworks]

👍

[@geneva760]

The following suggestion is a BIG job -- but pull the wheels apart (HA - that and re-assembly is the BIG job component) and clear anodise the shiny outer sections. On one of my older 930's (HA - back when 17" BBS rims were MONSTERS) - the outer barrel was put in the lathe and I used a fine Scotch-Brite pad to impart a brushed type finish - voila - HA - no more polishing and in my opinion - I preferred it to the high shine like finish (HA - I am an 'anti chrome - anti polish' person = I do NOT like shiny stuff). Being that you guys do a lot of project type work - setting up your own anodising system could be very handy - especially with your DAMN salted roads. I have also used clear anodising on aluminium spoked motorcycle rims on some HD engined projects - EXCELLENT virtual maintenance-free outcome (HA - that is PERFECT for me as I am a 'set & forget' type person = make it PERFECT - then USE it EVERY DAY without any concerns - HA - or polishing). Once anodised or brushed - all I use is the pressure washer every now and again at the local carwash = NO polishing = NO problems = MORE high speed and LOUD driving//riiding time - HA. Have a nice day all. CHEERS from AUSTRALIA.

[@driftworks]

I'd rather just not have the dust in the first place 👍

[@geneva760]

True - HA - but the anodosing//brushed is perfect for a somewhat lazy perfectionist as I am. HA - and helps saves aluminium rims when the dam dogs piss on the wheels - HA. Stay safe - have a nice day

[@carlsprocket1743]

Phil, it's weird to see you're running negative caster.

[@driftworks]

It's not negative 👍The shock is angled that way, but the pivot points are all that matters. Draw a line from the lower ball joint to the top mount ball joint & it's positive. The car has 4.5* positive castor.

[@EG3HC]

“You’ve got a GT1 coming for that”... I’m sorry what now?! 😳😮

[@AmanJandu]

The Lambo

[@driftworks]

My GT1 inspired Murcielago project 👍

[@EG3HC]

Driftworks Ah yeah of course 👍🏻

[@t2rew]

I was surprised how there was nothing between the cars on track.

[@driftworks]

The 991 is faster. Or was, as this was before Al did had Manthey sort the car. I'm just not as quick as Al. He's a very good track driver.

[@markchip1]

The answer seems entirely straightforward - You need a pad that releases less dust - go on the forums of various performance marques and research "low dust pads". For the likely consequence of reduced braking force - just upgrade to a bigger set of rotors (and matching calipers) from a quality brand that will fit inside the wheels. Now, I will watch the rest of the video to see how you chose to fix this issue...

[@driftworks]

Low dust pads are generally super dangerous for spirited driving in my experience. I very nearly wrote a car off using EBC Green Stuff pads.

[@markchip1]

@@driftworks - Those aren't the only low-dust pads, btw. Some are not even marketed as such.

[@johnreynolds2240]

Phil, give Richard @ ClubAutosport a shout......he'll be able to source you some

[@driftworks]

Thanks John.

[@Matty.Hill_87]

It's toight.... Toight like a tiger

[@driftworks]

🤓

[@Lou-f]

If the new tyres are a step back would cutting one more groove in them help?

[@driftworks]

That's not something you do on a road tyre. It would be the wrong way to go anyway, it seems the grooves on the supersport may be a big part of the issue.

[@Lou-f]

Driftworks 👍 makes more sense

[@danielcidone8259]

is there any setup info on the GT3?

[@driftworks]

It's on Manthey KW V3 with Manthey alignment. That's about as much detail as I know.

[@jamest5149]

With you on the GT3’s having the best sound track of any standard car, period.

[@driftworks]

It just immediately sings 'racecar' My Kline inconnel exhaust on the white 991 was next level. Once of the best noises I've ever heard.

[@timburton1080]

@@driftworks so I'm rocking a back box delete on a 991, but so much more in there?

[@driftworks]

You can hear a little bit of it in the video at 12:20 kzbin.info/www/bejne/imOnpKF_e7KEh7c

[@idokwatcher2062]

You have 2 BMW track cars + CSL double duty, Porsche double duty (and a 991 GT according to this video?), Lamborghini GT car. Pursuing mastery with one car on track would be so much more cost effective than running 6 track cars. I guess when you have these types of vehicles that won't depreciate it's a completely different calculation.

[@driftworks]

I only have one track car: The E30 M3. The others are road cars ,a couple of which happen to possibly be pretty decent on track 👍

[@bladerunner6282]

i recently had to deal with a brake dust issue on my vantage. the OEM pads are Pagids and the amount of brake dust they created in a very short time was unacceptable to me. i suppose it was a consequence of their performance oriented nature. anyway, i don't need nor want performance oriented brake pads so i bought and installed some everyday type, mundane brake pads that now create very little brake dust and am thoroughly satisfied. a bonus is that they cost next to nothing compared to the Pagids.

[@driftworks]

Yeah there are definitely lower dust pads out there. I've not had good experience with them though. They don't support 'spirited driving' well.

[@bladerunner6282]

@@driftworks understood. :)

[@Blaqs1]

At this point I would just completely rebuild the whole car .. Might as well lol

[@driftworks]

Why not eh! 993 rear subframe swap at the same time eh!

[@brendon8702]

Yess

[@driftworks]

🤘

[@davidthomas7424]

Big boys and their expensive toys🤑🙏😎

[@driftworks]

😄

[@simons4474]

When can we have a look at the CSL??? And any other treasure hid underneath polythene??

[@driftworks]

I need to get around to it. Generally the videos are about doing stuff to cars, and it doesn't need a great deal doing. There has been another addition just yesterday actually. Vid soon if the footage is any good.

[@simons4474]

Driftworks Cool , German? Oh one other thing I’m curious about if you were going to buy a 991.2 gt3 would it be manual or pdk?

[@driftworks]

Yeah I bought my old 997.2 GT3 back.. love manual and PDK, but if I get my 992 GT3 allocation it'll be PDK.

[@simons4474]

Driftworks You have a pretty new Macan so hopefully you,l be ok.

[@fgewfee]

The disc is really worn out, where are the grooves?! :)

[@driftworks]

They were eaten. I was so shocked when I noticed they'd gone.

[@pepy977]

I have to ask but why do keep using parts descriptions like the septics? where in England

[@driftworks]

? I don't understand the first question. Where in England = Birmingham.

[@pepy977]

@@driftworks (septics)=Americans knuckle is hub carrier, header is manifold

[@pepy977]

@@foxx1111 I agree driftworks should have more subs but do the Americans change there description of words so the brits can understand? No they dont so I dont see why we should

[@FrenchJohn]

Are you selling the front caliper???

[@driftworks]

I will be selling them if this works out yes.

[@FrenchJohn]

@@driftworks Let me know; looking for a set of 4 pot calipers. I had 986 4 pot ones that I sold (should have never sell them) so looking for another set