Guide to MultiProcess Welders: Harbor Freight vs Vevor vs ArcCaptain vs Lincoln!

All these welders can Flux Core, MIG, Stick, and TIG weld. Thus the name of multi process.
All these welders are under $1,000 (depending on where you get it).
All weld great, if you want to these in action check out my other videos. I tried to find welders ranging in price, quality, and build. Figured this is a pretty good selection.
These are all DC output machines. None will do Alum. on the TIG process.
Replacement tig torch: amzn.to/3U1tE6Y
(pick up these if you have the larger 50 diense connection type): amzn.to/3EBhKLx
MIG 200: s.vevor.com/bf...
Coupon Code: VVG5%OFF
VEVOR MIG-250: amzn.to/3NKB6Sw
($50 off code: 50B0BF5DWPS5)
ArcCaptain MIG 200 -www.arccaptain...
Coupon Code: mech master
(sometimes cheaper on amazon): amzn.to/3GlKSsx
****I stand corrected, the ArcCaptain comes with an 18month warranty**
Titanium 140 - www.harborfrei...
Lincoln LE31: (cheaper on Amazon): amzn.to/3DPuEFa
Or you can go through HD: www.homedepot....
Nozzle Gel: amzn.to/3T6ypLZ
Anti Spatter Spray: amzn.to/3WzXH8w
Welpers/ Mig pliers: amzn.to/37CAxco
Welding Gloves: amzn.to/3trCEIt
Magnets: amzn.to/3wn9vA2
Clamps: amzn.to/3uhLms2
Angle Grinder: amzn.to/3im5yDJ
4 1/2" cut of disc: amzn.to/3Iw45VQ
Wire Wheel Brush: amzn.to/3tqDAgg
amzn.to/37GN6mZ

[@-DIYPRO-]

Congratulations to Quinn G. They are the winner of the welder. Subscribe and stay tuned for great welding tips!

[@ogr7771]

I am a welder, that being said if you want a quality machine that will last and have parts available for years to come then you need to get a Miller, Hobart or Lincoln. The import stuff will do ok for a little while, good luck on parts down the road.

[@anthonytackett3220]

Any thoughts on PrimeWeld? I believe those are made in USA also.

[@_hector__]

@@anthonytackett3220 They arent made in US, their store/hq is in New jersey

[@richardreynolds3597]

Let me start off by saying Thank You! It takes time and energy to put out videos and yours are truly appreciated. I just got into welding a year ago and bought a Hobart Handler 100 to get my hands into it. It has proven to be a very dependable and robust welder for the flux core welding I do. I would love to try my hand at Tig welding, and with the help of your channel and other on KZbin it will happen. Once again - Thank you!

[@-DIYPRO-]

I appreciate that! Thanks and stay tuned!

[@caseyboehs7118]

i have that same welder and it is straight up dog ass

[@RYwoodview]

Just saw this & want to say thanks. I do woodwork & minor metal work; always thought about learning how to do light welding. There is a dizzying array of welding machines out there and your review nailed a lot of the important aspects, whether applying to the ones you have or others.

[@-DIYPRO-]

Right on, thanks!

[@williswang7565]

Thank you for your video, which allows us to have more welder options. All the machines looked good, and I was particularly impressed with the big digital display from Arccaptain

[@-DIYPRO-]

The ArcCaptain is a good one!

[@lauraharbour8947]

I WANT THAT! I’m taking welding classes so I can work on my $900 project racecar. I’d love to have a multiprocess machine made in this century because my 50 year old stick welder isn’t always the right process for the job…

[@-DIYPRO-]

Right on, you are in the running!

[@michaelgonzalez5102]

I want that! I have been looking for a good multiprocess welder to keep learning at home. Thank you for making videos like these to help people like me who really want to pick out a great machine and don't know where to start.

[@-DIYPRO-]

Right on! You are in the running!

[@jesuscardenas3978]

I want that … I really need it. My previous employer stole close to $5,000.00 dollars on tools from me. I’m working at another shop now, but not having my tools makes work a little more complicated. Thank you in advance and thank you for sharing your experience with us!!

[@-DIYPRO-]

That sucks, you are in the running!

[@sterlingsudweeks6320]

I want that. Thanks for another great, informative video! My 1.5 year old Titanium 125 that I have been learning to weld with (using youtube videos like yours) died this week in the middle of a project, so I am in the market for a new welder, and this comparison was very informative. Keep up the good work!

[@-DIYPRO-]

Sorry about the welder and stay tuned!

[@mvalera71]

I want that welder. I am beginner and am still searching for my first machine. I have been watching many channels, but I like yours as one of the best because you are real and genuine good guy. I appreciate all your info and will continue to watch. Keep up the good work and hope your son picks my post for the free welder. Thanks, Matt(Oakland, CA)

[@-DIYPRO-]

Thanks, you are in the running!

[@RichardPietras]

I want that I've learned a lot about what to look for in a welder from your entertaining and down to earth informative videos - keep up the great work!

[@-DIYPRO-]

Thanks, stay tuned!

[@jphoffman1]

I want that! Would you consider reviewing Eastwood and Hobart welders? (The two I use). Eastwood 135 for mig and Hobart for stick.

[@-DIYPRO-]

Right on and stay tuned! I like the Eastwood, had that one awhile ago.

[@terriblejustawful2825]

I want that! Not sure if it's still going on but I literally just found your channel. *fingers crossed* I used to weld on that Lincoln you have there but the ex got the whole shop during a divorce. I've been trying to build my shop back since. It was a great welder! Looking to get another welder soon. This video was super helpful for more affordable options. Thanks for your thorough coverage!

[@-DIYPRO-]

It is still going. Stay tuned, you are entered in the drawing!

[@JohnDoe-cv8iw]

for me i just wanna buy a welder for at home, I've been a shipfitter for years, but dont really weld anything other than tacking everything together or whatever tools im using to fit. hoping i can get something like one of these and brush up on my skills at home for a pay increase at work! thanks for the video!!

[@mayrahernandez9908]

I want that, i need that actually. My husband is starting to practice welding to start on his dream job and is looking into which machine to buy.

[@-DIYPRO-]

Thanks, you are in the running!

[@bartcarrade]

I WANT THAT! I found your videos recently as I'm doing some research for a welder to get this Christmas. I need to fix a bike rack of mine, and figured it was time to get my own welder!

[@-DIYPRO-]

Thanks, you are in the running!

[@tommyloan]

Probably only going to use it for one job and then sell it, so what’s the best welder for 1/8” thick aluminum? I need to build 2 gates.

[@-DIYPRO-]

Cheapest would be Titanium 140 with the spool gun. Don't forget for alum. you'll need 100% argon gas.

[@jerrychan1471]

I WANT THAT! YOUR KIDS ARE THE SMARTEST AND BEST-LOOKING KIDS I'VE NEVER MET!

[@-DIYPRO-]

I'll tell them, LOL! Thanks, you are in the running!

[@troydean5702]

I want that. Definitely for Christmas. I will save the world with one welder.

[@-DIYPRO-]

Thanks and stay tuned!

[@jondavidmcnabb]

Thank you for this review. I grew up on "Big Red" and "Big Blue". I have lost all faith in them over the years because of pricing and quality. If if were to buy for work it would be HTP, Fronius, or OTC DiaHen. For personal welding there are several low price options that are perfect for the DIY'r.

[@-DIYPRO-]

Right on, thanks!

[@justinharbour2398]

I want that. Enjoyed the removal of the plastic sheets.

[@-DIYPRO-]

Right on, thanks!

[@jeffgood6441]

My vevor 210 3 in one stick clean and hf tig has been doing me well

[@jeffcuthbert9172]

“I want that” & love that you include your family, excellent information.

[@-DIYPRO-]

Thanks and stay tuned. Winner will be chosen tonight!

[@jspayne001]

I want that! Thanks for the comparison in features. Did you notice any significant differences in performance between the machines?

[@-DIYPRO-]

There is a difference between the cheaper ones. The ArcCaptain and up seem to run better so yes you don't get as good of a machine on the cheaper end.

[@-DIYPRO-]

and you are in the running!

[@haroldglennjones2865]

I want that. I’m doing research on welders . So many products to choose from. Watching your channel has been very helpful.

[@-DIYPRO-]

Appreciate it, thanks. Stay tuned!

[@Justletmedoit]

I WANT THAT 🎉🎉🎉🎉 I just have a little stick welder right now. I use it every day and would definitely use that mig welder everyday. 😊😊😊 I appreciate the video by the way. 🎉🎉 I’ve been looking at multiprocess machines specifically for the mig function. I work on all kinds of equipment 🚛🚑🚚🚒🛻🚙🏎️🏎️🏎️🚕🚓🚗🚙🚘🚔🚖🚘🚋🚃🎠🎠🎠🎠🚌🚎⛴️📎📎📎📎📎😊😊😊💯 I REALLY hope your kids pick me !!! I DEFINITELY WANT THAT !!!!! 🎉🎉🎉🎉🎉❤❤❤❤ thanks for the video !!!

[@-DIYPRO-]

Wow, that is a lot of emojis! Thanks, you are in the running!

[@jamesrichardson1901]

I want that. I'm just getting started and was looking for a multiprocess machine. I'm fortunate enough to have a mid-level budget so the lower end never entered the picture, nor did the fancy, expensive Millermatics. I considered that same Lincoln, and the HF Titanium and Vulcan lines, but ended up buying a Hobart Multihandler 200. More power, dual voltage, includes a tig torch, is spool gun and foot pedal ready, and has a digital readout, for about the same price as the Lincoln. That Vevor is nifty, though. I have their ultrasonic cleaner. No issues.

[@-DIYPRO-]

Right on, stay tuned!

[@tdeyoung1]

I want that. Thank you for your help with reviewing the welders. Very helpful. I am new to this and plan to begin, but trying to figure it all out. Thanks again, Tim

[@-DIYPRO-]

Thanks, you've been added to the list!

[@MrSlingblade69]

I want that! I’ve been researching welders and it would be my first one to start using on my hot Rod build.

[@-DIYPRO-]

Right on, you are in the running!

[@TheMiniMachineShop]

On the Titanium can you do most FCAW without tripping a 15 amp breaker?

[@-DIYPRO-]

As long as the settings are maxed out you can run on a 15 amp breaker without tripping.

[@TheMiniMachineShop]

@@-DIYPRO- I assume you meant NOT maxed out, but curious mine came with a 3-prong plug which outlets max out at 20 amps so that allows for max settings?

[@-DIYPRO-]

@@TheMiniMachineShop correct, as long as it's NOT maxed out.

[@bryancragnolini9768]

I WANT THAT! Love all you do.

[@-DIYPRO-]

Right on, thanks!

[@mmmikeyy.2629]

I want that, just signed up for 110 and 120, planning on get my welding certificate, thanks for the video, helped a lot as well 🙌🏽🙌🏽🙌🏽, happy thanksgiving to you and your family 🤝🏽👍🏽🙏🏽.

[@-DIYPRO-]

Thanks, you are in the running!

[@mmmikeyy.2629]

@@-DIYPRO- 🙏🏽🙏🏽🙌🏽🙌🏽🙌🏽

[@seanmckay3392]

hey man "I want it" im just a kid trying to get into welding and i got a lil 2000s Lincon flux core mig welder and it sucks welds splatter and crack for me, and I would appreciate that welder so me and my friend can build our first go-kart together and so i can teach him how to weld also. Hey by the way i like your channel just subbed and nice review i think your super underrated (edit) i hope Seekonk Massachusetts is one of the lower 48 states

[@-DIYPRO-]

Right on and stay tuned!

[@donaldhawley9654]

I WANT THAT . Thanks for the channel I do feel as if I have learned from you. 👍

[@-DIYPRO-]

Glad to hear it, thanks!

[@alexrileyfoxhound5453]

Just discovered your channel. Enjoying your content. Just wondering the videos I've watched with you welding you are not wearing any PPE for breathing. Are you concerned with inhaling the welding debris? Any have you done any videos on it?

[@-DIYPRO-]

That is correct, you should have good ventilation or a mask. Most of the time I have a good cross flow from the door in back of my garage and then I'll lift the garage a little as well. If I'm doing a lot it will be open all the way.

[@alexrileyfoxhound5453]

@@-DIYPRO- Thank you kindly for your response!

[@scottjune3554]

I want that ALRIGHT 👍 I like giveaways I want that I really like these comparison videos it's incredible what you can get with some of these cheaper machines

[@-DIYPRO-]

Right on, thanks!

[@wetonwet3655]

I am currently trying to advance my career in welding. I decided to take classes on the different processes but they were underwhelming. I am to anxious to go out of state to a legit welding school but i want to tig weld aluminum or perhaps travel and weld pipes. I am a very quick learner but i have trouble with welding because i don’t have access to it when i want to train. I am looking for an affordable welder that i could practice uphill welding for stick and tig. I also would like to weld aluminum. So i guess im asking what machine would be good for 1-4g 1-4f welding stick or tig. The issue being uphill and overhead usually is on thicker metals.

[@-DIYPRO-]

Keep in mind none of these will do alum. with TIG. You'll need an AC/DC machine for that.

[@wetonwet3655]

Ya was just looking for suggestions i figure im looking around 2k

[@steveheichelbech1364]

I want that ! That little welder would be great around the shop for myself and the kids to learn on!

[@-DIYPRO-]

Thanks and stay tuned. Winner will be chosen tonight!

[@black1985vette]

i want that. Good to know which come with accessories and which have to be purchased afterward. Any tips on gas?

[@-DIYPRO-]

Thanks, and you've been added to the list!

[@ezelk1337]

I want that. It looks like a pretty good welder for the money. Nice comparisons. You have a well done KZbin channel. Thanks

[@-DIYPRO-]

Thanks, stay tuned!

[@baronblansit]

Love the video. I want that. I have been interested in picking up a hobby for many years. I have many hobbies and love to create many things.

[@-DIYPRO-]

Right on and stay tuned!

[@rbhe357]

As an alternative to the Titanium, consider the Klutch MP140SI from Northern Tool. I'm convinced it's the same welder with a 3yr warranty. Had mine for a few years and it has not disappointed.

[@-DIYPRO-]

Haven't ever tried the Klutch, I'll have to add that to the list. Thanks!

[@mmmikeyy.2629]

Super excited for tomorrow 🙌🏽🙌🏽.

[@-DIYPRO-]

Me tooo! Stay tuned!

[@Onhereforfun85nodrama]

I want that. I am a very novice welder and have learned quite a bit from your channel

[@-DIYPRO-]

Thanks, glad it was helpful. You are in the running!

[@murph2521]

Awesome video, where did you get that vulcan sheet metal guage? Dumb question, but i cant find it on hf

[@alexmolina3743]

I WANT THAT!!! Great video!

[@-DIYPRO-]

Thanks, you are in the running.

[@PBAB17]

With the Eastwood Mig135, what is the best wire for that welder? For auto restoration.

[@19mati67]

My Lincoln LE31MP just blew up after only one year, with light use once in a while.

[@estebanlopez994]

I WANT THAT! Mech Master’s kids “ I NEED IT!!!” -SpongeBob

[@-DIYPRO-]

Thanks, you are in the running!

[@9Antonian]

I want that! Learning how to MiG weld and could really use it. Thanks brother take care.

[@-DIYPRO-]

Thanks, you are in the running!

[@dudergames6547]

arccaptain has a 2 year warranty now. you can TIG aluminum DC with helium as well but its not commonly done that way..

[@-DIYPRO-]

Arccaptain is stepping it up, thanks!

[@theimpatientbrewer]

I want that, but I'm in the UK. I have the MIG 200, it's not bad for what I use it for, but I can't work out if the TIG is lift or scratch. It feels like scratch. But I bought a Vevor TIG 160 with hf start as it made it easier.

[@-DIYPRO-]

If you win, you'll be getting a gift card, LOL!

[@jimnaz6281]

I want that!! Mech Master I want to learn how to weld and this would be a great jump start 💯👍

[@-DIYPRO-]

Right on! You are in the running!

[@Artisaacster]

I want that! looking at getting my first welder and this video was very informative. thanks!

[@-DIYPRO-]

Thanks and stay tuned!

[@lesliehammond2519]

I want that. This video was really helpful. I have been wanting a welder for a while and this video was really informative and straightforward. It was extremely helpful. Thanks.

[@-DIYPRO-]

Right on. Thanks, stay tuned!

[@MrPetervp14]

I’m confused this video is contradictory to the video you made on the arc captain. Said in that video 18mo warranty and here 30 days. The in that video said it came with everything but a spool gun.

[@-DIYPRO-]

When I saw the 30 days I figured that was the warranty and after I'd posted the video I noticed that was 30 days money back guarantee. I mentioned that in the description as well but I wish there was a way to edit videos with at least text after posting. That one was my bad.

[@fredhinck9685]

That Lincoln is a big box store version, not to be confused with the welding store version.

[@larryguevara3350]

Would you do a review on the HF 62486

[@-DIYPRO-]

What item is that? it's not showing up on HF site.

[@richardmontgomery7780]

I would like to have that. Great review, great depth of actual operations for each machine. Keep up the awesome work. Happy holidays!!!

[@-DIYPRO-]

Thanks for the feedback, you are in the running!

[@costume35]

Hello grate video but witch one in the welder doesn’t cut off

[@-DIYPRO-]

What do you mean by cut off?

[@costume35]

Sorry I ment one that stays on and don’t get hot and stop wait to cool down

[@quinng9359]

I want that, i’ve been trying to start welding recently, i’m starting to work trades and i think this could help me expand to more.

[@-DIYPRO-]

Right on. Thanks, stay tuned!

[@-DIYPRO-]

Congrats Quinn G. You are the winner of the welder. Please email me at [e-mail]. You have 7 days to contact me or else the welder will be forfeited. Congrats!!

[@dfazz247]

Yep, I want that. Thanks for all you do.

[@-DIYPRO-]

Thanks, stay tuned!

[@victorreppeto7050]

Would love to see the prime weld and the lotos added to this list of comparisons.

[@stevebeaulieu2617]

Hello, what 110v machine do you recommand me on amazon for welding my rv fifth wheel upper deck frame? Tubes are probably about 1/8 to 3/16 thick. I need that welder incase of a road trip problem and maybee a couples small projects at home. Thanks.

[@-DIYPRO-]

If it's for outdoor, portable type stuff I'd go with an inverter stick welder. They are small and pack a punch. I'm currently in the process of testing out some and here are a couple that I like: amzn.to/3l5FFww amzn.to/3RpOzkF

[@darrylferguson8353]

I WANT THAT. To you and your family, Merry Christmas and a happy new year!

[@-DIYPRO-]

Right on! You are in the running!

[@bassquatch1379]

I want that! I'll give it a great home!

[@-DIYPRO-]

Right on, you are in the running!

[@R1BLACKRAVEN]

5 welders and no reviews on how each one works, so which one should I buy? Which done a good job and which one done a bad job? Yeah, I don't know either. One hell of a review here.

[@-DIYPRO-]

That's because it's not a review but a guide. I've done dedicated reviews for each of them. Check out my other videos for those.

[@joshualicciardello7517]

Does the arcCaptain have the chart?

[@-DIYPRO-]

Yes, in the manual. Not on the machine.

[@zoneapex]

what do you think of the 4 in1 Stahlwerk

[@-DIYPRO-]

I've been wanting to try them out. I'll have to add it to the list.

[@marloncarbonell3446]

Yes I want that!

[@-DIYPRO-]

Right on and stay tuned!

[@west5757]

I want that!!! And thanks for the video. Very useful and to the point.

[@-DIYPRO-]

Thanks, you are in the running!

[@wingnutt50gh]

I want that! Thanks for all the informative videos.

[@-DIYPRO-]

Right on! You are in the running!

[@jarrettdixon9850]

I want that!! Need that!! Gotta have that!!

[@-DIYPRO-]

Thanks, you are in the running!

[@LightaFire_studio]

I Want That! So glad you put this match-up on here. This is the kind of content the community needs to make informed decisions. Thank you! Liked and subscribed

[@-DIYPRO-]

Right on and stay tuned!

[@smnkm4ehfer]

You can DCEN aluminum just an FYI

[@-DIYPRO-]

Still with 100% argon or is that when you need helium?

[@anthonycabrera6318]

good video 👍

[@-DIYPRO-]

Right on, thanks!

[@joesledrider8530]

I want that!! looks like a fun machine.

[@-DIYPRO-]

Thanks, you are in the running!

[@TJs_Mobile_Welding]

I want that, would be awesome... Thanks for the chance

[@-DIYPRO-]

No problem, you are in the running!

[@joeprice8352]

I want that! Great content. Keep it up!

[@-DIYPRO-]

Thanks! Will do and stay tuned!

[@williamstinson5433]

I want that great video I’m going with the Lincoln Le31MP

[@-DIYPRO-]

Thanks, you are in the running!

[@scottthompson7547]

I like it, i love it, I want that! :) :) Thanks for all the great info!

[@-DIYPRO-]

Thanks, stay tuned!

[@mark.luczkowski]

I want that. Good job on the reviews.

[@-DIYPRO-]

Right on! You are in the running!

[@dannygill8519]

Great video. Thx for sharing. 👍

[@-DIYPRO-]

Thanks, stay tuned!

[@robd2848]

I want that.... Looking to get into welding to make myself more marketable when the zombie apocalypse comes

[@-DIYPRO-]

Haha right on and stay tuned!

[@frankmarti8984]

I want that thanks

[@-DIYPRO-]

You are in, thanks!

[@-DIYPRO-]

Let me know what welder you'd pick up? Happy Holiday!

[@williswang7565]

happy holiday

[@jeremiahcarpenter9947]

Of the welders you reviewed in the video I’d love the Titanium or the Lincoln, but the Vevor would be very cool too!

[@Justletmedoit]

I think I would get the 250 . Happy holidays

[@-DIYPRO-]

Same to you!

[@-DIYPRO-]

Wouldn't be a bad, free, welder, right?

[@jessesmith4474]

I really want that welder 😂

[@-DIYPRO-]

One more to make sure I know you really really want it!!

[@morethanovercomer]

I want that vevor welder 😌💪

[@-DIYPRO-]

Thanks and stay tuned!

[@547Rick]

I want that! Great gift for someone.

[@-DIYPRO-]

Thanks, you've been added to the list!

[@russianwolf6561]

Anyone used the vevor for working on bodywork?

[@-DIYPRO-]

It did fine on some 1/16", not as thin as autobody but I could have turned it down even more.

[@aaroncover2762]

I want that. Thanks for the video

[@-DIYPRO-]

Thanks, stay tuned!

[@TheGuyFromDenmark95]

Arccaptain gives 30 days money back guarantee, but 2 YEARS of warranty

[@-DIYPRO-]

I noticed that right after I posted the video and added it to the description.

[@ironhead320]

I would have to say the arc captain or the vevor 250

[@-DIYPRO-]

Thanks, stay tuned!

[@wdsitaliano]

I want that

[@-DIYPRO-]

Right on, thanks!

[@jeffgood6441]

Just get the vevor mine runs amazing

[@-DIYPRO-]

Right on!

[@robertdeanfoster]

I want that welder. Thanks

[@-DIYPRO-]

Thanks, you are in the running!

[@bamaboy6207]

i want that!! great video

[@-DIYPRO-]

Thanks, you are in the running!

[@vaerxxx3231]

I want that. Need a welder desperately

[@-DIYPRO-]

Thanks, stay tuned!

[@Eric..F]

I WANT THAT! and I hope your wife didnt find out on Thanksgiving how much money you have spent on welders :). Seriously, great content and great channel. Keep it up! maybe more Timwelds collabs? :)

[@-DIYPRO-]

She knows I have an addiction, she doesn't even go into the garage anymore! Thanks, you are in the running!

[@airrifle4800]

I want that. Thanks for doing what you do!!!

[@-DIYPRO-]

Anytime, you are in the running!