Boss GT-1 Played Through Marshall MG100DFX FX-Loop Return.

  Рет қаралды 35,217

GuitarNTabs

GuitarNTabs

Күн бұрын

Пікірлер: 151
@eraldopaulesu1267
@eraldopaulesu1267 5 жыл бұрын
Hi there. Thanks for your videos. I was hoping to use the GT1 in the effect loop only for modulation and delays while entering with wha-wha and overdrives into the normal Amp input. Would this work by connecting the "Send" of the effect loop to the GT1 input and the GT1 output to the Amp return?
@GuitarNTabs
@GuitarNTabs 5 жыл бұрын
Hey there, Eraldo. Hmm, I have never seen or heard anyone do this kind of thing... so I don't really think it's an option... Basically it's either way.. Either you use the GT-1 in front of your amp, or you use it in your amp's effects loop.. Maybe if you contact Boss, they'll have a different answer? Sorry I can't be of more help.. Let me know if you need anything else Cheers.
@anthonycruz6909
@anthonycruz6909 10 ай бұрын
But it was a basic question tho ,,, hhhmmmmmm😢​@@GuitarNTabs
@pablo963
@pablo963 11 ай бұрын
Hello Kenny. Have you ever connected your "send" into the GT1, using the MG preamp, then using the GT1 just for the typical modulation and time effects (and switching off preamp cab etc). I'm thinking of trying it that way but was wondering if anyone did before and any tips/tricks. Thank you! Happy new year!
@jakeeheredia
@jakeeheredia 4 жыл бұрын
Hey what's up man, I have the same unit and I really love it (Using it the same way for my Peavy Valveking.) However I had a question: what are you using for the "Out" in the chain for the GT-1? I find that JC--120 Return sounds the best in terms of clarity but the other outputs have their uses as well. What do you use and what do you think sounds best?
@GuitarNTabs
@GuitarNTabs 4 жыл бұрын
Hi there, Thanks for watching, and thanks for your question. I set the Output Select to always match the equipment I connect to. So in this video I had it set to Combo Amp Return - since that makes best sense. I hope this helps. Happy New Year.
@BrandonKJohnson
@BrandonKJohnson 3 жыл бұрын
I agree I think the jc return sounds the best. (I use mine mostly thru the effects return of my Marshall MG100DFX)
@nellawell4976
@nellawell4976 2 жыл бұрын
Bro, Great sounding setup.Bet you like your Cort guitar, resiliently sold mine & bought a W.G.
@GuitarNTabs
@GuitarNTabs 2 жыл бұрын
Thank you, I really appreciate it. I sure do, that Cort is an excellent guitar! I bought it real cheap, several years back, and I still have it. Pickups are great, the same for the neck, but there's quite the weight to it! A W.G.? Thanks for your comment. Cheers.
@nellawell4976
@nellawell4976 2 жыл бұрын
@@GuitarNTabs Your Welcome, bought mine cheap as well but at the time I never knew who Cort really was and all the guitars they produce! Wish I kept it now.
@GuitarNTabs
@GuitarNTabs 2 жыл бұрын
@@nellawell4976 - Hi! I see, and I can relate! There's always that one, or maybe multiple guitars, that we regret selling! Maybe you can find another! Have an excellent day. Cheers.
@rmgabor
@rmgabor 4 жыл бұрын
Helo, I dont it understand it fully, if I have a boss katana 50 mkI, and i want to loop with a boss gt1, but my amp, has doesnt have an fx loop output, i cant loop?
@GuitarNTabs
@GuitarNTabs 4 жыл бұрын
You want to loop? I'm not sure I fully understand...? Are you talking about connecting the GT-1 through an amp's Effects Loop Return? What amp do you have? Cheers.
@rmgabor
@rmgabor 4 жыл бұрын
@@GuitarNTabs Hi, i have a Boss katana 50, but it does not have an fx loop(send, return). Can i loop without the fx loop?
@jeremiahurbano4488
@jeremiahurbano4488 3 жыл бұрын
Up
@metalheadCP
@metalheadCP Жыл бұрын
Hey man, thanks for the videos! I put the GT1 into my EVH 5150 iii Stealth 100w head FX loop and I'm not getting any sound when I hit the FX button on the EVH footswitch. I have the output from GT1 into EVH return, and EVH send going to GT1 input (with my guitar going into the front input on the EVH head). I did it this way because I still want to use the EVH preamp and only have time based effects in the FX loop. Am I doing something wrong? I see you only have the GT1 output to FX loop RETURN and guitar into GT1 input, but that disables head preamp, correct? Is my only option to go guitar-->GT1-->head input in order to keep all of the great features/preamp of the EVH Stealth??
@Mando_djarin
@Mando_djarin 3 жыл бұрын
Hi your channel is awesome, Do you have the tsl files for the patches for this video, I’m running my gt-1 through my return on my Peavey bandit 112 can the speaker cabinets be disabled so I can use the bandits speaker.
@GuitarNTabs
@GuitarNTabs 3 жыл бұрын
Hi there, Michael. Thank you for watching, and for your comment and question. I greatly appreciate it! I may have the file somewhere, I'm not sure... But, I remember it was the Clean Twin preamp model, with the Stereo chorus, stereo compressor and T-Scream overdrive. Yes, the GT-1's speaker types can be turned OFF. Simply turn the dial counter clockwise, until you see "OFF". Then you're only using the preamp model. I hope this helps. Otherwise let me know. Cheers!
@Mando_djarin
@Mando_djarin 3 жыл бұрын
@@GuitarNTabs thanks for replying, if you do find the files would you be able to send them to me. They would be perfect for my sound I’m looking for 🙂 do you have any videos demonstrating the gt-1 plug into the main input of your amp with the preamps on the pedal switched off, I’ve see one of you videos show a queen tone do you have the tsl file or settings for that tone it’s awesome
@GuitarNTabs
@GuitarNTabs 3 жыл бұрын
@@Mando_djarin - Hi again, Michael. Sure, I'm always happy to assist. I'm sorting through all my patches this afternoon, for an upcoming gig, so I will see what I can find, and then let you know, if I find what you're looking for. Hmm, I actually don't think so, sadly.. Atleast none I can remember at the moment... However, I have planned a few videos, using my amp, with the GT-1's preamps turned Off. So I will see if I can get that done, soon! Thanks, I might also have the file for the Queen patch, yes. I will have a look for that one as well! Please let me know if you need anything else. All the best.
@Mando_djarin
@Mando_djarin 3 жыл бұрын
@@GuitarNTabs Hi thanks for replying, have you had chance to search for the tsl files.
@GuitarNTabs
@GuitarNTabs 3 жыл бұрын
@@Mando_djarin - Hi, yes I've had a chance to get through it all, and I think I've found it, or atlaest something close. Next time I fire up Tone Studio, I will export it, and upload it to my Google Drive, and share a link, so you can find it. Sounds good? Cheers.
@omarriadelhamshary7345
@omarriadelhamshary7345 4 жыл бұрын
I'm guessing you have to buy an external footswitch to be able to switch between channels?
@GuitarNTabs
@GuitarNTabs 4 жыл бұрын
Hi there, When connecting through an amp's Effects Loop Return, you bypass the preamp-section on in amp, meaning only the speaker will be active. Channel switching on the amp is not possible, since all knobs, EQs, etc. are disabled, due to the Effects Loop Return connection. If we're talking about switching channels on the GT-1, then you have the onboard CTL1 and the option to buy an external footswitch, which will give you 2 extra footswitches, for Assigns, etc. I hope this helps - if not, then please let me know, and explain your question further. Cheers.
@omarriadelhamshary7345
@omarriadelhamshary7345 4 жыл бұрын
@@GuitarNTabs oh this helps a ton I appreciate the fact that you took the time to reply. I have a Digitech RP500 and I used to switch effects as you can imagine. Let's say I'm covering a song live and I need to switch using the GT1, can I simply create my own preset or align 2 different presets and switch between them using any of the foot pads on the pedal or do I have to purchase a foot switch?
@GuitarNTabs
@GuitarNTabs 4 жыл бұрын
@@omarriadelhamshary7345 - Hi again, Sure, no problem at all, I always strive to answer viewer comments 🎸 The beauty of the GT-1, and any Boss multi effects processor, is the Assigns. The GT-1 offers a total of 6 Assigns, per patch. The CTL1 will accept Assigns, and you can have multiple Assigns on a single footswitch. Adding an external footswitch will open things up a little more, in terms of Assigns. A good product would be the Boss FS-7, which is perfect and smaller in size, compared to the Boss FS-6. So in your case, if you need to switch between effects, or activate different effects, then you need to use the GT-1's Assigns, and set them up to do exactly what you need. If have videos on that as well, search my channel, they will be of help. Generally you can have it all within ONE single patch. I use the Assigns to give me a clean sound, an overdrive sound and a solo boost, all withon ONE single patch. The Assigns won't assign specific patches, only effects and parameters - but the UP and DOWN footswitches will take care of switching between patches and presets. For example, on my clean sound I have the PREAMP, FX1 and REVERB buttons ON, now, for the overdrive sound, still within the same patch, I Assign the CTL1 to turn off the FX1, but at the same time turn ON the OD/DS and DELAY buttons. Lastly, for my solo boost, I will assign the OD/DS Solo parameter to be activated along with the delay feedback or level being increased. I hope this makes sense. Let me know.
@omarriadelhamshary7345
@omarriadelhamshary7345 4 жыл бұрын
@@GuitarNTabs makes alot of sense. I guess I need to just experiment as often as I can. I've yet to buy it but I'm tempted to and i saved up for it so here goes. Also, is the expression pedal abit small? Does that bother you when you use it?
@GuitarNTabs
@GuitarNTabs 4 жыл бұрын
@@omarriadelhamshary7345 - That's great, I'm pleased to hear that. Indeed, it's all about experimenting and taking the time to figure it all out. Once you get it, you will be able to program all you need! Let me know how it goes, and please get back in touch, I'd be happy to assist and support. The expression pedal isn't really a problem, atleast not to me, it's easy to rock back and forth - no issue. I hope to hear from you again. Cheers.
@BrandonKJohnson
@BrandonKJohnson 3 жыл бұрын
I thought the speaker models only worked when using the headphone/line out output selection. ?
@GuitarNTabs
@GuitarNTabs 3 жыл бұрын
Hi there, Brandon. Thanks for your comment and question, it's greatly appreciated. The speaker models are designed for use with line equipment and headphones, that's correct. However, when an amp has an Effects Loop, you can use the Effects Loop Return to connect the left output from the GT-100. Using the Effects Loop Return will bypass your amp's preamp section, meaning the EQ, channel switching, and in some cases also the volume. If there's a master volume, then you should be able to adjust the volume there. Otherwise the Effects Loop will have some form of knob got adjustment. You use the Effects Loop Return to be able to use the GT-100's preamp models, only using your amp's speaker(s). In some cases it might be a good idea to also turn off the GT-100's speaker emulation. I hope this makes sense. If not, then please let me know. All the best.
@BrandonKJohnson
@BrandonKJohnson 3 жыл бұрын
@@GuitarNTabs yeah that's what I do. I run it into the effects return of my Marshall MG100DFX. It has an effect loop level (volume) and a master volume as well. P.s. I know this amp gets a lot of trash talk online but it's GREAT for pedals in the front and especially using a multi effects unit in the effects return. Just fyi to anybody interested.
@GuitarNTabs
@GuitarNTabs 3 жыл бұрын
Hi again, Brandon. Exactly, it has that separate effects loop volume, and that's the place to adjust the level of the effects loop. Of course you have to set the master level on the GT-100 as well. Precisely, it's a good Amp, and that's the reason I got one as well. Pedals are excellent through the amp. I used the GT-100, GT-10 and GT-1 in the Effects Loop Return, and really happy with the result. Let me know if you need anything else. All the best.
@sixthsense7
@sixthsense7 Жыл бұрын
Hi. If you connect processor thru fx return of the amp it will bypass the clean and ovd channel but it will bypass the digital fx section? I mean the reverb delay etc. Thanks
@GuitarNTabs
@GuitarNTabs Жыл бұрын
Hi there, That's correct, the amplifier's preamp-section will be bypassed, meaning the clean and overdrive/distortion channels will be bypassed. This will leave the speaker outputting the sound, so tha you can use the GT-1's preamp models. I'm not entirely sure about the FX section on the amp, sorry... Anyway, if you already have a MFX unit, then it'll have delay, reverb, etc. I hope this helps. Best reagrds.
@sixthsense7
@sixthsense7 Жыл бұрын
​@@GuitarNTabsin my marshall 100dfx if i use fx return effects in marshall will be on. I want to see if my marshall have a problem or its ok like that
@jeeeeev
@jeeeeev Жыл бұрын
Do we need to engage/turn on something on the marshal for the Return to work?
@GuitarNTabs
@GuitarNTabs Жыл бұрын
Hi, Not as far as I remember, but you may have to dial in the FX knob on the front of the Marshall, if there's no output. I hope this helps. Best regards.
@christinehanson8627
@christinehanson8627 3 жыл бұрын
But u not showing how to assign the looper and the tuner. No body on KZbin is showing this. My tuner comes on the third foot botton. And the looper not programmed in. This unit is quite hard to work out correctly
@deepanshusingal9207
@deepanshusingal9207 4 жыл бұрын
Do we have to off the preamp settings on gt 1 when output is other than line?
@GuitarNTabs
@GuitarNTabs 4 жыл бұрын
Yes, the PREAMP shouldn't be ON, if you're connected through an amplifier, etc. The PREAMP should be ON when connected through mixers, monitors, the amp's effects loop return and headphones.
@nareshjames6235
@nareshjames6235 3 жыл бұрын
How to turn off the preamp?
@axxywaxxy9316
@axxywaxxy9316 4 жыл бұрын
Hi there. How are the tones on standalone without the preamp? Planning to get rid of my pedalboard and start with GT 1 or maybe 1000 core. Cheers!
@GuitarNTabs
@GuitarNTabs 4 жыл бұрын
Hello there, I assume you're talking about the effects in the GT-1, correct? If so, the effects are great, real Boss quality and standard! The GT-1 is well suited in a set-up with an amplifier, as well as through the Mixer or PA. I can highly recommend the GT-1, but as you say, there's also the GT-1000Core now!
@SebastiaoGtr
@SebastiaoGtr 3 жыл бұрын
Minha pedaleira boss não sai som no RETURN do marshall, o cabo precisa ser stereo?
@GuitarNTabs
@GuitarNTabs 3 жыл бұрын
Olá, Qual é o modelo do seu amplificador Marshall? Não acredito que um cabo estéreo seja necessário, mas dê uma olhada no manual do seu amplificador - ele estará lá. Avise-me se houver mais alguma coisa que eu possa fazer. Tudo de bom.
@enriquee.k3329
@enriquee.k3329 4 жыл бұрын
Thank you for the video, I have a question 🙋‍♂️ I bought the GT 1 week ago and first using it and going through the patch’s I see a lot of the patches are very low on volume, can’t head the sound even, so I need to higher the volume on amp but then other patches gets very loud which I need to lower again, why all patches are not assign as same volume ? Thanks
@GuitarNTabs
@GuitarNTabs 4 жыл бұрын
Hello there, Henry. Thanks for your comment and question, I appreciate it. All patches in the GT-1 are created at various volumes, sadly enough, but it's like that on almost every MFX you buy... I also find that most Factory Presets are too extreme and only really there to show how muchthe unit can do - which is not always for the best... That being said, what you're asking is a common question/issue, and it's a matter of leveling out those patches with each other. It's easier said than done, but a must, in my opinion, if you want to get the most out of the effects and patches. The first place you start is at your amp, without the GT-1, and have that set to the proper volume. If you're not using an amplifier, then you start at the preamp section in the GT-1. Let me point out, that it's very important to have the proper Output Select picked, on the GT-1. It should match the equipment you're connecting the GT-1 to. If you use your own amplifier, then always make sure to turn OFF the GT-1's onboard PREAMP-button. Now it's a matter of going through each effects, which is ON in the signal chain, and toggle between ON and OFF; in order to listen for any increase or drop in volume. Mostly effects like Overdrive, Distortion, Compressors, etc. will add volume or gain to the patch/signal chain. But go through every activated effect, and listen for a drop or increase in volume, when you toggle them ON/OFF. I hope this helps. If not, then please get back to me, and I'll be happy to assist further. All the best Cheers.
@enriquee.k3329
@enriquee.k3329 4 жыл бұрын
@@GuitarNTabs Wow that is a great help absolutely brother, I wish the reviews would tell you this issue I would not bought it and would bought a single padel patch instead 🤣
@GuitarNTabs
@GuitarNTabs 4 жыл бұрын
@@enriquee.k3329 - Well, it's like that with every MFX, no one has sorted this out... It's meinly up to the player, and that's a good thing, then you can always adjust and adapt the settings to suit your venue. Well, it's pretty much the same for individual effects, perhaps they seem a little easier to adjust, but then again...
@nicholasphillips3938
@nicholasphillips3938 7 жыл бұрын
cool videos, youve really helped me out with the gt1! I have a quick question, do you think the gt1 would be effective with running the gt1 THRU the effects loop instead of bypassing the preamp so that i may use the distortion of the amp itself instead of the distortion options aboard the gt1?
@GuitarNTabs
@GuitarNTabs 7 жыл бұрын
Hi there, Nicholas :-) Thanks for watching and thanks for your comment, I appreciate that! You mean to only use the GT-1 for modulation, delay and reverb, and then have the overdrive/distortion come from your external amplifier? Meaning that you want to set the GT-1 up in the effects loop of your amplifier? Cheers!
@nicholasphillips3938
@nicholasphillips3938 7 жыл бұрын
Yes exactly!
@GuitarNTabs
@GuitarNTabs 7 жыл бұрын
If you like the sound of your amplifier, and the distortion channel makes you happy, then go for it. Try it out, and see how it sounds and what it will do :-) You can always try that for a while, and then decide! Cheers!
@hitlarrajbhandari
@hitlarrajbhandari 3 жыл бұрын
Can you do a video testing both with and without Boss GT 1?
@GuitarNTabs
@GuitarNTabs 3 жыл бұрын
Hello, Sure, I can do that. I will add it to the video list. Have an excellent day.
@tankdarla637
@tankdarla637 3 жыл бұрын
How does it sound for metal? To me that is the ultimate test. And also can it do metal and retain clarity when cranked?
@GuitarNTabs
@GuitarNTabs 3 жыл бұрын
Hi there, I'm no metal guy, so I can't tell you, sorry... However, the GT-1 is an all-round beast, so I'm sure it will do metal, no problem! Highly recommended unit.
@tankdarla637
@tankdarla637 3 жыл бұрын
@@GuitarNTabs Right on , I have the Boss ME70 and its supposed to be very similar, but I use it for effects,tuner and noisegate. I havent messed with the preamps ,distortions, overdrives or modeling on it yet. I believe the only way to really know if they are really any good is how they sound at band volume, I am sure they are, I am stoked with the effects and surprisingly the expression pedal on it!
@GuitarNTabs
@GuitarNTabs 3 жыл бұрын
@@tankdarla637 - Hi again, Each set-up is different, but it will all work. I mainly use the GT-1 for its preamp models and effects, straight to PA, monitors or headphones, and it all sound great! Sure, testing a unit like this, at band volume, would really show what it's capable of doing and performing. Great to hear, Boss has put out some great units in their time, I'm a big fan myself! Have an excellent day, and please let me know if you need anything. All the best.
@sticksnstones23
@sticksnstones23 4 жыл бұрын
These tones sound night and day better (more full and tube like) than the line out tone demos. I am curious to hear the difference between using the front end input of the amp vs the effects loop return that you used here. Is there a big difference ? Does using the return of the effects loop disable all knob control ( EQ, volume, Reverb etc..) on the amplifier ?
@GuitarNTabs
@GuitarNTabs 4 жыл бұрын
Hey there! Thanks for your comment and question, I really appreciate it. Indeed, the tones are great, and full of life and sustain. I've just re-watched, and I'm impressed as well, haha! Generally the front input of an amp is used to connect the multi effect if you only want to use the multi effect for its effects only... Your amp will do all the "amp stuff" and the GT-1 will provide the effects, for example, overdrive, chorus, delay, reverb, etc. It's important to make sure the GT-1's onboard PREAMP-button is turned OFF, when connected this way. You don't want to have the GT-1's PREAMP running, along with your own amp.. That causes problems.. Also, the Output Select should be set to Small Amp, Combo Amp or Stack Amp - depending on your amp. The Effects Loop Return is for bypassing your amplifier's preamp-section - meaning, all the EQ knobs, etc. and only leave the power-amp section - the speaker(s) - running. This enables you to use the GT-1's onboard preamp and cabinet models. Along with its effects, of course. The difference is the way you want to use the GT-1, as explained above. I hope this helps - please let me know. All the best.
@danielcassiedy8879
@danielcassiedy8879 4 жыл бұрын
@@GuitarNTabs Well explaination mate. Cheers!!
@GuitarNTabs
@GuitarNTabs 4 жыл бұрын
@@danielcassiedy8879 - Cheers, I appreciate it. Let me know if you need anything. Have an excellent day.
@amitrajtopno2184
@amitrajtopno2184 5 жыл бұрын
Four cable method is possible from GT-1 ?
@GuitarNTabs
@GuitarNTabs 5 жыл бұрын
Hey there. No, 4 Cable Method isn't an option with the GT-1... In order to use the 4 Cable Method, then effects unit will have to have an effects loop, which the GT-1 doesn't..
@obendaperkins5574
@obendaperkins5574 Жыл бұрын
Hello there, thanks for that, I was connecting my GT 1 to my Mesa Boogie studio wrongly (using 4cm) with a loss of noise. I'll try only sending the mono out to the amp fx return. And thnaks more for playing that Purple Rain chords, I was playing also that with mistakes. The Gt 1 is amazingly good for the price and so far the best money I spento on guitar equipment. Now, the only thing I wish it had is an amp control socket to switch channels in the amp within a patch. I've seen that the BOSS GT 1000 core has it, using one of hos CTRL sockets. Do you know if the GT 1 CTRL out can tricked into working as ana amp control? Thanks in advance
@GuitarNTabs
@GuitarNTabs Жыл бұрын
Hi there, My pleasure, I'm happy to it was of help to you. Hmm, 4 Cable Method? That's not a possible connection with the GT-1, since it doesn't have an onboard Effects Loop? So yes, you have to connect the Mono out from the GT-1 to the Effects Loop Return on your amp. That way you can use the GT-1's preamp models. You might want to try and turn off the Speaker types on the GT-1, because you're using your amp's speaker for outputting the sound. Sadly the GT-1 can't be used for switching channes on an amp - it has to have the dedicated Amp Control socket. I hope this helps. Let me know if you need anything else. Cheers.
@obendaperkins5574
@obendaperkins5574 Жыл бұрын
@@GuitarNTabs Thanks a lot...By the way haven't you made a video on GT 1 plus Radial pro D2 box you own? I'm very curious to see how much of sound improvement can one achieve...I'm recently using the GT 1 direct to the PA/mixer (using EMG active Lukather set) and the clean tones an effects are phenomenal (confirmed by the other guitarist using an Helix Floor), much less so the dirty ones. I tried changing speaker model but I'm not 100% satisfied yet. I wonder how can fix that - adding an IR loader pedal or using a passive DI box . Which results do you have when going diorect with the radial DI? Much better than with the GT 1 cab simn alone? Thanks in advance
@GuitarNTabs
@GuitarNTabs Жыл бұрын
@@obendaperkins5574 - You're welcome. I have a video talking about how to connect the GT-1 to a DI box, yes. A DI box won't really improve the sound, its main objective is to take an unbalanced signal and convert it to a balanced one. This is a great help, if you have longer cable runs on stage, since longer cables can have an impact on the signal frequencies and the loss of such. I can't really see the need of an IR loader. The GT-1's cabs and preamps are great, just play around with the speaker types. Again, a DI won't really change anything, other than the unbalanced to balanced, unless the DI has speaker emulation, which some models have. I have great results, no problem or lack of anything, to be honest. I use the preamp and cab sims from the GT-1, nothing else. I hope this helps. Cheers.
@obendaperkins5574
@obendaperkins5574 Жыл бұрын
@@GuitarNTabs Many thanks. I'm glad I asked you, it means I have to improve my EQ settings then. I was also thinkng to upgrade to a BOSS GT 100 (keeping the GT 1 anyways), I undertsand that it has more tweaking capabilities to sculpt the tone and maybe better cab sims than the GT 1... What's your opinion? Or maybe it's betetr to save for an used GT 1000? THanks in advance
@GuitarNTabs
@GuitarNTabs Жыл бұрын
@@obendaperkins5574 - Always happy to help out - keep the questions coming, if you need anything else. The GT-1 is basically a down-scaled GT-100. The cab options on the GT-100 is the same as the options in the GT-1, though you have a few cutsom modes on the GT-100. I really like the GT-1 for what it is, but I also own a GT-100, and I really like it as well. Yes, there are some more options to sculpt your sound further, but mostly I don't really need that... Sometimes less really is more, hehe. A GT-1000 is a whole other level, new effects, new cabs and new preamp models - a full-on upgrade, to be honest. Lots of I/O capability. In the end it all really depends on what you're after. I had the chance of trying out the GT-1000Core, and I really liked it. Some great sounding amp types and cabs, as well as effects. I hope this help. Let me know if you have further questions. Cheers.
@jpovilela
@jpovilela 7 жыл бұрын
Hi GuitarNTabs, How did you set up the "output select"? Combo return? Thank you for sharing it!
@GuitarNTabs
@GuitarNTabs 7 жыл бұрын
Hi there, 104543041202730658262 :-) Yes, that's exactly what I did. Are you running a similar set-up, friend? Cheers!
@jpovilela
@jpovilela 7 жыл бұрын
Yes! I also have the GT-1 and a Peavey Bandit 112. I normally connect it to return input or straight to my monitors. Very nice video, thanks for sharing it! Btw, have you done any patch to get a bit more heavy sound (e.g Dream Theater)? Cheers!
@GuitarNTabs
@GuitarNTabs 7 жыл бұрын
Sounds like a great set-up too :-) I really like the amps and FX in the GT-1, they are really good! Hmm, no, not really... I must say I'm more of a blues, pop and rock kind of guy... Perhaps I'll do some patches in the genre, down the road. On tip though, if you're looking for a tone similar to a famous guitar player, then start by doing a little research on the internet. See what gear that guitar player uses. For example - what amps does he use? What effects? Basically anything like that. That's always what I do, when I'm trying to create an artist patch :-) Let me know if you have further questions, or need further help with anything :-) Cheers!
@jpovilela
@jpovilela 7 жыл бұрын
You are right. Very good tips! Gonna try it later. Thanks, buddy! Cheers!
@GuitarNTabs
@GuitarNTabs 7 жыл бұрын
Glad to hear that! :-) Yeah, give it a try, and see what happens! It's been a great way for me to do it, and it actually doesn't take very long :-) You're welcome! Cheers!
@mrBeanstring21
@mrBeanstring21 6 жыл бұрын
Please! someone tell me how to remove 2-3 second pause after 1 cycle.. its not continuously looping..
@GuitarNTabs
@GuitarNTabs 6 жыл бұрын
Ryan, it all really comes down to the beat that you're ending the cycle on. You'll have to be extremely precise, in order to get the most fluent result. Practice that, and see what happens :-) Let me know how it all goes. Cheers.
@mrBeanstring21
@mrBeanstring21 6 жыл бұрын
@@GuitarNTabs thank u man.. ur very helpful...get it now.. thank u
@GuitarNTabs
@GuitarNTabs 6 жыл бұрын
@@mrBeanstring21 - Thanks, I appreciate it! :-) I'm glad I could help - let me know if you need anything else! Have a great day Cheers.
@beanbot12
@beanbot12 7 жыл бұрын
Thank you so much man! You're awesome!
@GuitarNTabs
@GuitarNTabs 7 жыл бұрын
Hi :-) Thanks, mate! Here's your video, hehe :-) I hope this helps you out! I tried to get the absolute best out of the session, so hopefully that comes across! So just to recap for you: With any amplifier that has an FX-Loop you can connect any multi effect like this - output (usually the Left output) of the multi effects unit to return on amplifier. As I also said in the video, I messed around with turning on/off the speaker cabinet from the GT-1 and just using the Marshall's speaker - both methods worked very well. I couldn't really hear much difference when switching between the two - so no problem there. You basically just have to set up your patches the way you like them, and use the external amplifier, and its FX-Loop, to monitor your sound :-) If you have any questions, then please let me know! :-) Cheers!
@beanbot12
@beanbot12 7 жыл бұрын
Currently I own a digitech rp80. And my amp is a blackstar I'd core stereo 100. It has an fx loop. But when I use this method, I get absolutely no sound. What would cause this?
@GuitarNTabs
@GuitarNTabs 7 жыл бұрын
Hi again, beanbot12 :-) Cool, I think we can make it work - actually your Blackstar ID Core Stereo 100 is a really cool amp, and the FX-Loop is actually in stereo - great! Okay, here's what I believe you need to do, or atleast try out: Connect your guitar to the input of the RP80. Take the Left output from the RP80 and connect it to the Left return on the ID Core 100. Turn on the RP80 and the amplifier and use the MASTER volume on the ID Core to set the master level. Make sure that the level on the RP80 is set at a good volume too :-) If the MASTER volume on the amp isn't working, then try one of the other volumes on the amp, I believe there's more than one, if I remember correctly :-) Here's a cool tip you can use, since the ID Core has a stereo FX-Loop. If you want to run your RP80 in stereo, instead of mono, as I eplained above, then connect one jack to the left out, as I explained above, and another jack cable to the right out of the RP80. Then make sure to connect the left out from the RP80 to the left return and the right out to the right return on the amp - you'll now be able to run your RP80 in stereo through the ID Core's FX-Loop :-) See if that helps :-)
@beanbot12
@beanbot12 7 жыл бұрын
GuitarNTabs this still does not work. It works while plugged in the front of the amp and it works if I have it in the fx loop (send>rp80> return) and (guitar>amp) but it doesn't work like this (guitar>rp80>return)
@beanbot12
@beanbot12 7 жыл бұрын
It also doesn't work if I were to plug my guitar straight into the fx loop return
@drexel11041
@drexel11041 6 жыл бұрын
I'm running the GT1 through the return fx loop on the back of my Marshall. It disables all knobs on the amp (which I was aware would happen), however both volume knobs on the combo amp are also disabled. Now i'm stuck with just the volume control on the GT1. Do you have any recommendations on controlling the volume?
@GuitarNTabs
@GuitarNTabs 6 жыл бұрын
Hey Chris. I believe we've chatted before, right? Doesn't your Marshall amp have a dedicated knob for the level of the FX Loop?? I know that my Marshall amp has - on the front. Some other amp might have it on the back, beside the FX Loop. How's that looking? Let me know what you see. Best regards.
@danielcassiedy8879
@danielcassiedy8879 4 жыл бұрын
@@GuitarNTabs I think it's normal if all the knob are disabled while running the multieffect through the fx loop return for some amplifier. that mean, we are using 100% the multieffect system. In this case, he can adjust the level on his multieffect. Correct me if I'm wrong🤘
@GuitarNTabs
@GuitarNTabs 4 жыл бұрын
@@danielcassiedy8879 - Exactly, that's the case. There will either be a dedicated volume knob for the FX Loop, or it's controlled via the multi effect.
@beanbot12
@beanbot12 6 жыл бұрын
I know for other gt series, you can set it up to switch channels for your amplifier. Can you do that with the gt1?
@GuitarNTabs
@GuitarNTabs 6 жыл бұрын
Hey there, beanbot12 :-) Nice to hear from you! No, switching amplifier channel with the GT-1s isn't possible. The GT-10 and GT-100 both have a dedicated jack for the called AMP CONTROL. The GT-1 doesn't offer that.. :-) Hope this helps! Regards.
@moisestsuzuki
@moisestsuzuki 2 жыл бұрын
Great video! I know people normally say not to run distortion and overdrive pedals in the effects return, but in this case would you say that it’s okay to do it? It sounds good to my ears.
@GuitarNTabs
@GuitarNTabs 2 жыл бұрын
Hi there, Moises. Thanks for your comment and question, I greatly appreciate it. What people mean is, that you shouldn't run distortion/overdrive through the effects loop - meaning, both the send and return of the effects loop. That's right, it's not meant to be used and connected that way, but if you only connect thtough the effects loop return, then it will only bypass the amp's preamp section - which is the EQ knobs, etc. - and leave the power amp section running, which is the speaker(s). This will allow you to use the preamp models of a multi effects unit, like the GT-1 in this case, and that's a great way to do it, with absolutely no issues. In that context it's completely alright, no worries. As long as it's only the effects loop return, and not both the send and return. I hope this makes sense. Let me know if you need anything else. Cheers.
@moisestsuzuki
@moisestsuzuki 2 жыл бұрын
@@GuitarNTabs That makes a lot more sense. Thanks so much for your response!
@GuitarNTabs
@GuitarNTabs 2 жыл бұрын
@@moisestsuzuki - That's great, I'm glad to hear so! You're very welcome, I'm always happy to assist. Let me know if you need anything else. Cheers.
@rdg6045
@rdg6045 6 жыл бұрын
I'm running my gt-1 through an unknown amp, I'm using a 3.5mm to 6.5mm (male to female cable). The 3.5mm was connected to the PHONES output of the gt-1 then the 6.5mm to the AUX-IN plug at the back of the amp, with that I'm setting my gt-1 output select to LINE/PHONES
@GuitarNTabs
@GuitarNTabs 6 жыл бұрын
Hey there! Thanks for your comment - I appreciate it. I see, and that seems right, so no real worries there :-) Does your unknown amp have an Effects Loop? Best regards Cheers!
@rdg6045
@rdg6045 6 жыл бұрын
@@GuitarNTabs cheers! Regarding to your question, no it doesn't have an Effects Loop. Once I connected the gt-1 to the aux-in port of the amp it automatically disables all of the amp's knobs. With that my full control on the volume and eq is on the gt-1 itself and I have no problem with that and it also sound nice to me.
@GuitarNTabs
@GuitarNTabs 6 жыл бұрын
@@rdg6045 - Hey there! Aah, that's excellent! Your aux-in then acts like the Effects Loop Return would do - bypassing the preamp-section on your amp, leaving the power amp-section (the speaker) on! That's also what you would want, when using the GT-1 like that! 😊 That's great to hear - enjoy it! Let me know if you need anything else! Have an excellent day! Cheers.
@rdg6045
@rdg6045 6 жыл бұрын
@@GuitarNTabs yeah that's true, have a great day keep rocking. God bless
@GuitarNTabs
@GuitarNTabs 5 жыл бұрын
@@rdg6045 - Thanks, you too! Let me know if you need anything else! God bless! Cheers!
@mWheelz1123
@mWheelz1123 6 жыл бұрын
Could I do the same thing with a tube amp? (Hot Rod Deluxe)
@GuitarNTabs
@GuitarNTabs 6 жыл бұрын
Hey there, Mike. Thanks for your comment and question - I appreciate it! :-) Sure, as long as the preamp you want to use features an Effects Loop, which I believe the Hot Rod Deluxe does. On a regular amplifier you would have Effects Loop Send and Effects Loop Return, but on the Hot Rod Deluxe, and most other Fender amps, the two are called Preamp Out and Power Amp In. The Preamp Out is your standard Effects Send and Power Amp In is your standard Effects Return. You would then have to use the Power Amp In, to use the Effects Loop Return. I messaged Fender about this, some time ago, and that was the answer I got - if you're in doubt, then please contact them again, just to make sure :-) In this case we only need to use the Effects Loop Return (Power Amp In), because that allows us to use the built-in preamps and cabinets from the GT-1, and other multi effects, generally just using your amplifier as a speaker, to output the sound. Like you normally would with studio monitors, PA-speakers, etc. We are only using the Power Amp section (the speaker(s)) and not the Preamp Section (EQs, channels, etc.) If that makes sense :-) You'll find that some of the knobs on your amp will be bypassed, but there will be one or two still active. These knobs, on your amp, will allow you to dial in the level/input from the Effect Loop Return :-) I hope this helps, but let me know if you have further questions, or need help :-) Have a great weekend! Cheers.
@mWheelz1123
@mWheelz1123 6 жыл бұрын
Thanks! I have one on the way. Have you used it as an audio interface? I would love to be able to listen to the GT-1 while also sending a DI signal to my PC.
@GuitarNTabs
@GuitarNTabs 6 жыл бұрын
Excellent, that sounds great, Mike! :-) Yes, normally I use the GT-1, via USB, straight into my laptop for recording and practicing - it's great for that :-) You're talking about sending a DI signal to your PC? May I ask why? :-) Normally you wouldn't need that, since the GT-1 is all you need for using it as an audio interface :-) Let me know, Mike :-) Thanks & Cheers.
@mWheelz1123
@mWheelz1123 6 жыл бұрын
@@GuitarNTabs Late reply. But the idea is to have a recorded DI signal so I can go back and run it through different amps/models/effects if I am not 100 percent satisfied with the sound.
@GuitarNTabs
@GuitarNTabs 6 жыл бұрын
@@mWheelz1123 - Hey there! Thanks for the reply! May I ask what the purpose for that would be? Running it through different amps, etc.? Cheers 😊
@YTOnceAgain
@YTOnceAgain 6 жыл бұрын
Do I understand this correctly: You only demo a fender'ish clean, a chorus and the tubescreamer? Maybe I missed something because I skipped most of the approximately 13 minutes of talking.
@GuitarNTabs
@GuitarNTabs 6 жыл бұрын
YTOnceAgain - yes, that is correctly... Well, there's a lot more than "just" talking going on, but I guess you would've known, if you'd watched it all... Anyway, Have a great day :-) Cheers.
@SundanceKid121
@SundanceKid121 7 жыл бұрын
Hi, great tutorials, have just got a GT1 and am connecting to a line 6 spider iv 30W, is it best to connect to guitar input and set spider to clean and all spider effects off or is their another way of connecting? thanks
@GuitarNTabs
@GuitarNTabs 7 жыл бұрын
Hey Timm. Thanks for your comment, I appreciate it! :-) The way you connect it really depends on how you want to use the GT-1 with your other gear? Do you want to use the GT-1 for effects only?? Or what is your plan exactly? By knowing that I can much better help you further :-) Cheers.
@SundanceKid121
@SundanceKid121 7 жыл бұрын
Hi, thanks for the reply, mainly want to use for patches to switch between the genres i play, this is at home not live, does seem as if the way i have connected the gt1 and the spider clash a bit? as if the gt 1 pre amp is being modelled by the spider? if thats the right way of describing? thanks
@GuitarNTabs
@GuitarNTabs 7 жыл бұрын
Hi again! You're welcome, no problem :-) Okay, so if I understand this correctly, then you want to use the GT-1 for effects only - for example, overdrive, compression, delay, reverb, chorus, etc. and not for the GT-1's preamps. When using the GT-1 with your own amplifier, then you have to make sure that the GT-1's preamp is turned OFF, otherwise it will not sound good. You can check to see if the GT-1 preamp is on by looking at the button labeled "PREAMP". If the red light is on, then the preamp is active, and I believe it is by default. To turn it OFF, press the PREAMP-button once, and the led will go out - then make sure to save the preset. Also, make sure to select the proper OUTPUT SELECT for the GT-1. If you are connecting the GT-1 to the input of your amp, then set it to either SMALL AMP or COMBO AMP - see which works the best :-) Let me know if this helps! Cheers! :-)
@martindavidson2071
@martindavidson2071 7 жыл бұрын
Hi, I have the exact same amp as you and have ordered a GT-1 off Amazon so cant wait to get it. Is there a way of getting those patches?
@GuitarNTabs
@GuitarNTabs 7 жыл бұрын
Martin Davidson - thanks for watching, and taking the time to post your comment! I appreciate it :-) Sounds like a great combination you're getting yourself! The GT-1 is an amazing piece of gear! I'm really happy that I decided to buy one, when it first came out! Yes, of course! I'll be happy to share the patches with you! If you want, I can send them to you via mail, I just need your mail :-) Best regards Cheers!
@jesanahmed3155
@jesanahmed3155 7 жыл бұрын
sorry for late replay, Basically i turn off all knobs of my amp except my master volume but it does work also i select stack return in my output select because stack amp thats why.when i turn on my gain knob of my amp that time i hear the sound. is there any issue about solid amp/valve amp ?
@GuitarNTabs
@GuitarNTabs 7 жыл бұрын
Hi! Connect the GT-1 like this: Guitar to input on GT-1. Left output from GT-1 goes to Return on your amplifier. Make sure that your amplifier is set on its normal channel/clean channel. Given that your amp might have more than one channel.. Depending on the amp, some knobs might work, and some might not.. You'll have to try and see what works. Well, on my Marshall amp, the one I used in this video, I had to turn the Effects Loop Mix all the way up. If I didn't then there would be no sound. Remember to check for that! It makes sense, since you're connected to the amp's FX Loop then it also needs to be turned up :-) Let me know if that works :-) Cheers!
@jesanahmed3155
@jesanahmed3155 7 жыл бұрын
hi, today i am applying this thing in marshall MG100HCFx but when i turn of the gain it does not work, i turn off all knobs only master volume i use it does not working, even i use the return of the amp and select stack return because there is 4 speaker and i am using BOSSgt10 :(
@GuitarNTabs
@GuitarNTabs 7 жыл бұрын
Hi there :-) Nice to hear from you! Hmm, I'm not quite following here? You want to connect your GT-10 to the Return of your Marshall MG100HCFX, right? When you turn off what gain and what knobs?? On the GT or on your amp? Please try and explain it a little further, if possible, that would help me a little more :-) Otherwise you're welcome to send me a video of what's going on :-) Let me know!
@twobeastsstudio
@twobeastsstudio 7 жыл бұрын
Great tone, Im also using GT-1 too but right now im using it with practice amp with 6" speaker so the sound is not pretty good. Im condering to buy a new amp. I have 2 choices. First is amp with fx loop return and the Second is tube amp with good clean sound. Which one would be the best answer for?
@GuitarNTabs
@GuitarNTabs 7 жыл бұрын
Poramat Mahaboonpachai - Hi there! :-) Thanks for watching my video, and thanks for the kind words - I appreciate it! The GT-1 is an amazing little unit - I can't play without mine now ;-) Yeah, the smaller the amp/speaker the more you have to compromise with the sound quality, sadly enough.. Well, I would say that it kind of depends how you want to use the GT-1 i your set-up?? Do you wish to use the GT-1 for effects only?? Or do you wish to use both the effects and amp/cab sims?? Because that will tell me, and you, a lot more about what you need :-) Thanks :-)
@twobeastsstudio
@twobeastsstudio 7 жыл бұрын
Maybe both effects and amp simulation because i love the rectifier tone so much lol
@GuitarNTabs
@GuitarNTabs 7 жыл бұрын
Alright - I see! The amps and cabs from the GT-1 is also really great! I use the GT-1 for both effects and amps/cabs - straight into the mixer/pa - when I play live :-) Well, for your set-up I would then go for an amp with an FX-Loop, because that way you'll be able to bypass the Preamp-section of that amp, by connecting the GT-1 to the return of the FX-Loop, and then use the built-in amps and cabs from the GT-1 :-)
@twobeastsstudio
@twobeastsstudio 7 жыл бұрын
Thank you so much ;)
@GuitarNTabs
@GuitarNTabs 7 жыл бұрын
You're very welcome! :-) I'm glad that I could help out! Please, feel free to contact me if you need any further help! Cheers! :-)
@jesanahmed3155
@jesanahmed3155 7 жыл бұрын
Can i use the input (returns) of the Marshall MG100HCFX what will be the output select>?
@GuitarNTabs
@GuitarNTabs 7 жыл бұрын
Yes, every amplifier with an Effects-Loop can be used by running the L (left) output from the GT-1 to the Return of the Marshall amp. Set the Output Select to Combo Return if it's a combo amplifier. Combo amp = small to medium amplifier with either 1x12 or 2x12" speakers. Or set the Output Select to Stack Return if it's a stack amp setup you're using. Stack setup = a top + a cabinet. :-) Remember, by running the GT-1 through the Return of your amplifier, you'll bypass the Preamp-section of your amp, and only the Master-section of your amp will be available. That would, for example, be the master volume, reverb, etc. All the EQ knobs won't respond, because they're a part of the Preamp-section - which you've bypassed. The biggest reason for running a multi FX through the Return of an amplifier, is so you can use the built-in amp and cabinet sims from the multi effect. I guess that's why you want to run it like that, right? The speaker of your combo/stack amp will basically just be the 'monitor' or speaker, which will output the sound. Just like if you were hooked up to a mixer/PA. :-) I hope all this makes sense! Otherwise please let me know! I'll be happy to help out further! Cheers & thanks for watching :-)
@jesanahmed3155
@jesanahmed3155 7 жыл бұрын
same case for gt 10 am i right ?
@GuitarNTabs
@GuitarNTabs 7 жыл бұрын
Yes, the same deal :-) Any amp with an effects-loop and any guitar/amp modeler can be connected this way :-) Always Left-output to Return of the amplifier :-)
@jesanahmed3155
@jesanahmed3155 7 жыл бұрын
Thank u so much sir, it will really helps me, but i ask you lot of question if face any kind of problem hope you dont mind
@GuitarNTabs
@GuitarNTabs 7 жыл бұрын
I'm glad that I can help you out! :-) You're very welcome to ask further questions - any time! Just let me know, and I'll see what I can do! :-) Cheers!
@jesanahmed3155
@jesanahmed3155 7 жыл бұрын
hey dude finally it works .. thank u so much. actually i did not turn on my ext loop that is why it did not work one more question can i use me25 same though there is no output option
@GuitarNTabs
@GuitarNTabs 7 жыл бұрын
Hey there! Great! I'm really glad to hear that! :-) Enjoy it, and rock on! Yes, you can connect the ME25 the same way, there should be no problem in that. Haven't tried it, but plugging into the return of an amplifier will work with any multi FX :-) Let me know if you have more questions :-) Cheers!
@SnypaXL1
@SnypaXL1 7 жыл бұрын
HI, great video. i just got a GT1 too, but am having problems getting it routed through Cubase directly - you say you have nailed this? have you produced a video showing that set up? Keep up the good work!
@GuitarNTabs
@GuitarNTabs 7 жыл бұрын
Hi Ben :-) Thanks, and thanks for watching - I appreciate it! What problems, exactly?? Well, yes, I've had no problems using the GT-1 through Cubase. Unfortunately I haven't made a video about this, yet! But I will make on soon, now that I know some people are looking for it! :-) I connect the GT-1 (via USB) to my laptop, making sure that I've installed the correct drivers from Boss, and then open up Cubase, and make sure that I set the Driver Settings in Cubase to GT-1. I believe the menu is called 'Device setup' in Cubase. From there you would have to go into the Channel Mixer on the channel you've created. In that Channel mixer you have a Gain knob, and you would then have to match the input level with the output level in Cubase. You should be able to see the input and output level in the utility-menu in the bottom, in Cubase. I hope this makes sense, otherwise then please let me know! I'll be happy to help you out and perhaps make a video for you :-) Cheers!
@gbohnen
@gbohnen 7 жыл бұрын
Hello from Germany, can you please send me these patches. i've bought the gt1 yesterday. these sounds are amazing. how can i send you my email adress? Thank you Günter
@GuitarNTabs
@GuitarNTabs 7 жыл бұрын
Dear, 109967423784184240009. :-) Thanks for your comment, and thanks for watching! I really appreciate that! :-) Nice to heart that you've bought the GT-1! It's an amazing tool, and will gove you everything you'll ever need! I'm so happy that I bought mine, when it first came out! :-) Regarding the patches, then you can download them here: (just follow the link provided) www.dropbox.com/s/rz0xzsz58hwddj5/Berg%27s%20Boss%20GT-1%20Patches.rar?dl=0 Hope this helps! If not, then please let me know :-) Again, thanks for watching, and subscribing! Means a lot to me! :-) Cheers!
@royronnie259
@royronnie259 Ай бұрын
Just do it. Stop talking
Boss GT-1 Tutorial - Creating A Patch From Scratch
15:38
GuitarNTabs
Рет қаралды 101 М.
Boss GT-1 - Small but VERY Powerful!
5:21
Youri De Groote
Рет қаралды 211 М.
Boss GT 1 - Guitar Effects Processor - GIG TONES
12:53
The Studio Rats
Рет қаралды 180 М.
Using the Boss GT-1 with various amps
8:00
Chris Benton
Рет қаралды 42 М.
Boss GT-100 2023: Guitar Effects Mastery!
21:12
Dino Bose
Рет қаралды 47 М.
DEAD Game Boy DMG - Can I Restore it?
19:40
Bricoda
Рет қаралды 16
BOSS GT100  ACCEL/CTL
17:28
3TMBN
Рет қаралды 837
BOSS GT-1 Guitar Effects Processor | TOP TEN PATCHES VIDEO
3:59
Big Music Australia
Рет қаралды 149 М.