Gun Review MPA30T Defender top cocking model PCC type setup “Mac 11”

[@kornhead37]

I built mine from a normal MPA30T that was on sale and then later changed to the DMG/Glock mag grip, Aves 11.5 rail, I will be cutting the barrel back to 8.5" to put on a suppressor, and topped off with a Holosun 510 I took off another project. I will be doing the SB Brace, you convinced me! I would love to see MPA or PSA redesign this to be trigger "slapless" and move the safety to an AR location. Thanks for the video!

[@ResponsiblyRowdy]

@@kornhead37 I agree, I don’t love everything about it, but for the price it’s a good buy

[@kornhead37]

@ same, I would love to see a left side change with a bolt lock

[@hellaacapella]

Was worried about getting one because of all the hate it gets online and everyone saying it’s unreliable. Shot 150 rounds out of it straight out of the box. 3 types of ammo. Zero issues and TONS of fun!!!!

[@ResponsiblyRowdy]

@@hellaacapella I love this one its pure fun

[@sethreinoso845]

I went woth the original mpa30 m11/9. Its pretty much a direct copy of the cobray. Slapped a lage manufacturing max11sk upper on it, us machinegun pic rail, a3 tactical folding brace with a tailhook, modlite 18350 plhv2 on haley thorntail sbr mount, modbutton lite, aimpoint t1 with reptilia mount, then reolaced pretty much everything in the lower with all new. Got the mpa grip cover and some polymer mags. This little thing is freaking cool 😂

[@ResponsiblyRowdy]

That’s sick I like the original MPA cobray copies

[@crowsReverywhere]

Nice job looks great, to bad u lost it when you tipped over your canoe. May i suggest a video of u shooting up that squeaky chair you're sitting on :⁠-⁠) stay safe out there.

[@ResponsiblyRowdy]

Hahahahaha it is loud

[@Stormtrooper_Accuracy]

Looks pretty sweet with that brace.

[@GreezyBeShooting365]

Thank you for this video been looking for a pdw brace

[@slikkpaper4057]

Got mine last week. I added a laser/flashlight/foregrip combo today. I haven't shot the gun yet, but I hope to do so real soon!

[@Rafael.Yanes01]

Wouldn’t that make it illegal?

[@jamesmachado2258]

@@Rafael.Yanes01that’s most def illegal he needs a mini angle grip

[@agentq1980]

A3 tactical makes a collapsing brace that may fit that but they a very expensive.

[@keepitthoro6768]

If that brace was actually in the middle it would look nice..still best looking one i seen,good job!

[@ResponsiblyRowdy]

What do you mean actually in the middle lol. It is in the center

[@brndnlewis67]

Hey man could you walk me through adding the pic rail after heating and bending

[@ResponsiblyRowdy]

Sure. Have to have the adapter plate on the back. Then drill holes into the pic rail you are mounting to the adapter plate on the gun. This will give you a centered picatinny rail for a sight and brace if you make it long enough.

[@brndnlewis67]

Where could I find it for reasonable price

[@ResponsiblyRowdy]

I got mine from A3 tactical for $60

[@45Gunner556]

That’s badass PSA has them for 400 right now 🤠

[@Scooz-o6y]

🤫

[@45Gunner556]

@@Scooz-o6y 🤫 🧏‍♂️

[@SpazzGotTHaK]

U gon have to drop that "How to" video on the pic rail one time for the one time dawg😂

[@ResponsiblyRowdy]

Haha I should, I’ll look into that for a future video

[@WettDoggTV]

​@ResponsiblyRowdy yes I'm very interested in a how to vid for this mod

[@WettDoggTV]

@ResponsiblyRowdy I just recently purchased this gun and I'm having a very hard time figuring out how to get a nice set up like what u have

[@Awholeopinion]

You’d just need to sell the section of rail I wonder if there’s a collapsing brace for mp5 it may be wider

[@gtt3920]

Closest thing I’ve seen to the og cobray style same step down which you need. Can’t justify $250-400 for a toy tho. Got some ideas coooking with a pmc 63… one day

[@seanpugh6792]

If you can actually find one of these for that cheap then you’d better hop on it because these go for like $600 buddy and that’s without any accessories and just 1 magazine…

[@CTV_tactical]

picked one up from psa 399 its on way an im excited lol

[@2mbutler]

Did you get the Glock conversion?

[@CTV_tactical]

@@2mbutler na i haven’t yet but id like to at some point lol

[@2mbutler]

@CTV_tactical I have it mine. It's really easy to find Glock magazine, and at a cheaper price.

[@CTV_tactical]

@@2mbutler i gotta get one cause i have alot of glock mags lol where can i order the conversion kit

[@justinkase1360]

Definitely not a cookie-cutter gun, which is pretty cool. Would be pretty sweet with a micro red dot on the rail. I went in half (lol) on an MPA when I first got into guns. I was really considering SBR back then, there were no braces. What suppressor was that? You should get a 3d printer, then you could make all sorts of things.

[@ResponsiblyRowdy]

Supressor is a buddy’s not sure

[@agentq1980]

I have that same brace and gun. I was thinking there may be a way to replace the bars on the brace with smaller ones to make it fit around the pistol or mabey shave them down.

[@ResponsiblyRowdy]

I don’t think there’s an easy way to do that bud. It fits pretty good like I’ve got it

[@agentq1980]

@@ResponsiblyRowdy It sat to low for me. I didn't like the way it hit my hand.

[@therightone1741]

Do you have to have the home-made rail to mount the brace or does the brace mount straight to the firearm?

[@ResponsiblyRowdy]

You have to have the home made rail, and the adapter rail that is sold for this gun, then make the homemade piece to fit adapter. Purpose is to fit the brace underneath with enough clearance for the metal rods to slide. I grinded the bottom of the receiver to get a tighter fit. you can’t really see it so I decided it was worth it. But again no it will not mount to the gun directly

[@BigBadWoofF]

I have. A defender I found a pic adapter online bolts right onto the rear of pistol.

[@ResponsiblyRowdy]

@@BigBadWoofF yes I have the same adapter, however the pic rail it comes with is too small, that’s why I made this bigger one for the brace

[@Xunknown350]

that goes crazy where did you get the stock

[@ResponsiblyRowdy]

A3 tactical

[@lawrencegaraghty3081]

Me again.. I know she got the bent picatinny rail but I don't see anything attached to it.. would you break down how you attach the mpa30T

[@ResponsiblyRowdy]

You must have the adapter to bolt the bent picatinny rail to, there is not a way to mount the rail directly to the gun, must use the adapter

[@dakr3464]

Fkn nice bro! So it comes with 2 threaded holes on top and back for the rails or did u have to drill and thread?

[@dakr3464]

Ohh u drilled!

[@ResponsiblyRowdy]

@@dakr3464 no drilling, just shaving some metal off where the rails for the brace ride against the gun. It comes with the 2-3 holes and you bolt it to an adapter and that’s it.

[@johndoe8559]

How'd you get the rail on top? How does it mount to the brace?

[@ResponsiblyRowdy]

The rail is bent 90 degrees, the brace mounts on the pic rail on the back. Pic rail must be attached to adapter to attach it to gun and have it centered.

[@g9055]

Did you have to shave the gun because there isn’t enough clearance between the brace and receiver?

[@ResponsiblyRowdy]

Yes I wanted it as flush as possible

[@g9055]

@@ResponsiblyRowdy makes sense. That thing looks fun!

[@machinegunner2]

That pic rail you heated and bent was it steel or Aluminum?

[@ResponsiblyRowdy]

@@machinegunner2 aluminum

[@ResponsiblyRowdy]

@@machinegunner2 I’m sure a steel one would work better/more durable

[@lawrencegaraghty3081]

Hello.. great video..I have a mpa30T defender.. I would like to buy the I got my name on the list at SB technical. How is the brace a fixed to the weapon

[@ResponsiblyRowdy]

There is an adapter I bought to attach a brace to, it’s the picatinny rail adapter that bolts into the back plate of the MPA930, you must have the adapter to attach the brace to the pistol. I had to design a custom picatinny rail to mount to the adapter for mounting the brace and that’s what this video shows.

[@lawrencegaraghty3081]

@@ResponsiblyRowdy I wonder if you could put out a video showing the steps it took to make the the picatinny rail attached to adapt is there any adapter that you could use without the picatinny rail to attach the SB tactical

[@ResponsiblyRowdy]

@@lawrencegaraghty3081 I don’t think so, this is the only way I found to get it to work

[@kingshannothe1st155]

Did you know they make a pic rail for that gun ?

[@ResponsiblyRowdy]

Yes, it’s not long enough to fit this brace

[@kingshannothe1st155]

@@ResponsiblyRowdy ok, cool I’ll have to make a video of my setup.

[@libramoon9968]

Nice !!!

[@beto35745]

2 thing's..its like a mac 10 ...the mac11 is .380 and 2 why not shave the brace instead of the gun?

[@ResponsiblyRowdy]

It’s shaped after the Mac 11, I’m sure they made different calibers. You can’t shave the arms of the brace or it will not function.

[@beto35745]

@@ResponsiblyRowdy the mac 10 was 9mm or 45cal

[@crowsbridge]

Is it unreliable? Why is it unpractical?

[@ResponsiblyRowdy]

Impractical to carry around as a self defense gun, functions good

[@dakr3464]

Glock mag upgrade ❤

[@usernamehhhs4540]

start selling it

[@trichomeboss2731]

Fake 11 jamomatic

[@ResponsiblyRowdy]

It actually doesn’t jam so far

[@trichomeboss2731]

@@ResponsiblyRowdy still only bump fires doesn't do half the stuff a real mac does all it is a clone real macs are built stronger and do more than mpas

[@effnemm]

@@trichomeboss2731 mac11 $5k+ MPA defender $500

[@trichomeboss2731]

@@effnemm id rather have a ap9 than a masterpiece arms the ap works way better

[@effnemm]

@@trichomeboss2731 same! but ive always wanted one of those lol

[@ecobasetech4558]

Nice video but......From a safety perspective and for those watching this that don't know much about guns, just because you have checked that the gun is safe DOES NOT mean it's ok to muzzle yourself. That breaks the first 2 rules of gun safety: 1 - Always treat the gun as if it's loaded (regardless if you have safety checked/cleared it) and 2 - never point the gun at anything you are not willing to destroy (including yourself). Sorry to be acting like the "safety police" but I feel it's irresponsible be demonstrating unsafe gun handling on KZbin. I'm sure those of us gun owners know better but I'm more worried about those watching that don't.

[@Ghost2570-z6h]

What is the rear scope mount you are using the on thatv

[@ResponsiblyRowdy]

@@Ghost2570-z6h I made it