How to Clean Handguns

Certified armorer, NRA Distinguished Police Expert, and veteran instructor for over 40 years, teaches the proper way to clean a handgun, without gimmicks, expensive cleaners and lubricants, or fads.

[@Mike-ji8ez]

This gentleman is not only very smart, but such a classy person as well. America needs more men like GunBlue490.

[@jjiacobucci]

So true. He is a gem !

[@BamaChad-W4CHD]

I concur! Listen to the man that has been doing it longer than most youtubers have been alive.

[@rifleshooterchannel208]

NRA Fudds like him are the reason we get gun bans enacted.

[@deepb249]

With long long long videos that make you asleep

[@nallie10]

I operated my 1911's under the premise, the more oil, the better!! At the end of shooting sessions my guns were a muddy mess. Then I started watching your channel. After cleaning, I only applied a light coat of LSA to critical areas and wiped it off. Now at the end of a day of shooting, my guns look like they were just cleaned! Thank you sir for that important lesson.

[@josefredshirt2389]

Military police , Civilian police, Police sniper, professional armorer...I would hazard to guess that mr. blue knows what he is talking about. If one wishes to disagree with him, go ahead , I don't think he is particularly interested! I just found this channel and it is the sanest firearms channel on KZbin. Thank you very much for helping me, and I am sure many many other people, by sharing your knowledge for free. That's a very nice thing to do and a very fine gift for me.

[@douglaspollard4585]

Sir please tell us what you think about the practice of moly( molybdenum) coatings on bullets

[@aainspection]

"[These guns] are not made of cupcakes." Classic line. Seriously helpful and informative videos. Thank You.

[@chaimafaghet7343]

If they're not made of cupcakes there must be some other thing compelling me to put one in my mouth.

[@JxCxReichard]

​@@chaimafaghet7343You ok, man?

[@brentvinson9198]

The voice of experience. Listen to him.

[@mnrodriguez]

Ok! But properly lubricate your guns.

[@petermanetta2920]

We need folks with the experience to back up their advice like you to continue setting the record straight when it comes to firearm maintenance. Other than Hicock 45, you are the only one advising against oiling a handgun. I believe you guys are correct and have followed this very important advice. Thank you and keep making these very important and informative videos.

[@gunsguitarsandgambling3614]

I love the old school American guys...little or no profanity.

[@BamaChad-W4CHD]

You can hear him cuss just a little in a couple of videos but it's classy and making a major point.

[@Colt-ii4qn]

Guys got class 👍👍👍

[@blogobre]

Thanks, as a new gun user, your years of wisdom are already serving both a better understanding of firearms and better care.

[@luispadua8491]

GunBlue490 I would like to thank you for this video. It is very informative, I used to use oil and grease in my guns, and would malfunction at lest every one hundred rounds. Now all I do is clean the parts, dry them and put one drop of oil on the whole gun, and then dry it, The guns work flawlessly now, and require almost no cleaning after shooting. Most of the fouling is in the barrel and that is it. No more discoloration on my revolver, no more malfunctions. I used to slather my guns and oil and would find rust popping up here and there, and would think " Needs more oil", well sense I have been using only a drop of oil, no rust or patina, or discoloration on my guns. Thank you, you have done quite a service by posting this.

[@ctxflyer]

This man has forgotten more than the so called experts! SUPERB !!!

[@FROGDADDY79]

Thank you for investing your time and knowledge in proper cleaning of weapons, you helped me understand WHY I do not need to oil my guns. I was that 2 drop guy but not anymore after listening to you explain the reasons for not oiling. I actually laughed when you said "some of you look for places to put a drop of oil and that will gum up your gun." God bless you!

[@charleswebb5797]

Great information - very revealing insight. I have for 58 years cleaned my firearms without using any oil. Always use Hoppe's products. Have never had a single problem.

[@jeanducheamps7697]

Now this is what I have been looking for! Clear and simple instructions from an expert. I'm a fan for life. Thanks for the great vid!

[@klkakj44]

I have NEVER seen a more useful instructional video than this one. So much I DIDN'T know. Thank you so much!

[@My-You-TubeAAA]

Sir, I must say you really made me rethink a lot of stuff that I've learned. It's an honour listening to your videos. You really simplify things. Thanks a lot.

[@richardsimons4059]

This why I like watching KZbin when someone with tons of experience is willing to share their expertise to me that had no idea how to clean a gun and was doing it wrong. Thank you sir. Much appreciated. Now I am going to clean all the oil from my guns.

[@atomicdog71]

This has completely changed my routine for cleaning my firearms. Excellent instructions.

[@Colt-ii4qn]

Knowledgeable man sharing his many years of experience, much respect to you Sir 👌

[@mclifford6655]

Great videos. I have been shooting for years and wish that I had this knowledge back when. Mr. Richards really knows what he is talking about.

[@johndoe5229]

50 years from a certified armorer point of view, yes please, no tactical nonsense, yes please, a cartridge is to a gun like flour is to bread! this man is a genuine genius, plus he has an American behavior that is raw nowadays!❤️🤘

[@tmgforsakenx5772]

thank you for taking time to share your knowledge and experience with us. I really enjoy your videos it reminds me of the time I use to spend with my late grandfather.

[@SuperSportsman01]

Another great instructional video. Much of what we see out there about how to clean is based on particular products, and really comes down to selling a product. Tried and true methods that stand the test of time is where it's at. Thanks for the work you are doing.

[@thefarmfaa]

Very nice! Straightforward and effective. No need to chase the latest 'thing'. Thank you

[@buddymorrissey]

Sir, finding your channel was a Godsend. I've seen so many videos and blogs promoting this potion or that technique, it was mind-boggling. Experience and superior knowledge like yours will always cut through the B.S. When I heard your advice on minimal lube, I knew you were the real deal. My father in law has repaired mechanical watches as a hobby for many years, and the most important rule he taught me is clean components and just enough watch oil to wet the end of a hair. He has the same little bottle of oil he bought many years ago. Also, anybody that's ever worked their car knows that oil and grease slopped all around make for a dirty grimy mess. I'd guess a lot of gun owners are like 16 year old boys with their first car- they might have a vague idea of how it all works, and because they dearly love that car, they're hoping that the magic potion in the brightly colored bottle with the great ads and the testimonials from "everybody" will really make their car faster. They want to do SOMETHING, so they put on those stickers, the colored spark plug wires. That 16 year old boy grows up, but he still wants to do magic to his "toy." Regarding the solvent in the clear squeeze bottle- I'm sorry but I'm not clear- is that Hoppe's solvent? Hearing you talk about a no-oil philosophy for shooting in cold climates, I thought you might get a kick out of the video with the Beretta 92 lubed with Italian Gun Grease, ziplock bagged and frozen in a block of ice. kzbin.info/www/bejne/Z6SZdKlpfq5-mLs. They make amazing claims, but I wouldn't think a water based product would be the ideal protectant for metal...

[@majorpayne5289]

I absolutely love what this fine gentleman is saying! Awesome instruction!

[@GunBlue490]

+Major Payne Thank you for your kind words. May God bless you.

[@garys5540]

Yea!! He politely makes you feel stupid!! LOL

[@BamaChad-W4CHD]

You never disappoint! You are the voice of experience and common sense this platform needs more of. Hoppes is a fine product. Very well priced. They have been in business for many, many decades for a reason. They make good products at good prices. Also you can get a pack of three brushes from dollar tree. A dollar for one steel brush, one copper brush and one nylon brush. Great deal for extra brushes to throw in your bag or truck. Great video as always. As I said. You sir, never disappoint. The only thing I do really differently is, I keep an oil soaked rag around and I wipe my guns down frequently. It just gets rid of my grubby greasy fingerprints.

[@MrFuzzy1953]

Very well presented and invaluable information for a first time 9 mm handgun owner like myself... Simple breakdown like you're showing, is easy enough, but I'll definitely go to the gunsmith for any really detailed breakdown for cleaning.

[@willyb933]

Your expertise is much appreciated. It just makes total sense not to oil up a surface that is going to be subjected to the carbon and grime etc.of a firearm and create an abrasive 'sludge' that will counteract all you are trying to accomplish! As you stated these hardened steels will outlast generations of use ….if just kept clean and dry. Refreshing and sage advice from a professional! Thank you for your time and efforts.

[@nickydumas9455]

America has good men like our dear Gunblue, they are out there now opening their shops, day in day out. Reliable, forthright, accountable and willing to share/teach all they’ve learned from a lifetime of experience. Or simply for hire at a fair honest rate. God bless them “Not made from cupcakes” choked my coffee thru my nose! Thought i was gonna die. Ha! Love this guy

[@phil4986]

Thank you for this video. I was one of those oil drenching fools but no more. I did exactly what you said not to do about all the seams near the trigger and hammer so I have to clean all that oil out and not add anymore to it. The tip on the oily mag lips I had never heard about and may explain a few guns I messed up over the years. Dammit, to myself. Clean it well with Hoppes #9.... wipe it lightly with a silicone rag or mineral oil on a rag. No oil on or near any wood. Practically no oil. I am actually changing the springs on a new Ruger Wrangler 22 single action so your spring tip helped too. Thanks again. 7 years later , this man and his video are still helping people. Pretty awesome. Stop slopping oil everywhere, it attracts grit ....makes perfect sense.

[@frankz4900]

You're the best sir. Pleasure to watch your videos

[@tennisguyky]

Tip my hat to you sir! Teaching me so much and keeping it simple, much respect!

[@eduardorgm7349]

I am impressed, I was fully mistaken then... I really appreciate your teaching and your time

[@markmorrison4730]

God bless you sir! Great information and great to pass on to my kids as they learn about taking care of firearms.

[@RobWhittlestone]

Hey GunBlue490, nice to see you're back - and with a major leap in video quality! Congratulations! It's looking good! I really like your "no BS" approach, your encyclopaedic knowledge and knowledge of accurate shooting. Keep 'em comingf! All the best, Rob

[@nathanlambshead4778]

Wish I had met you 40 years ago. Now I think I have to take all of my magazines apart and make sure they are not oiled up, although I have not experienced issues. I do not shoot very much anymore but I do want them all in good working order . I just bought a used 10/22 that I took apart and cleaned using your video. Thank you.

[@HypocriticYT]

don't want any oil in magazines, if the oil gets into the primers they can misfire.

[@jimo680]

Great vid and presentation. I only recently got back into shooting pistols, and was surprised by the lubrication fads that seem prevalent. Thanks for doing this...very helpful. I have already passed this on to my niece and nephew. God Bless!

[@Res4722]

Answered many of my questions and concerns about what I have been experiencing on my weapons. I'm not a young man but I have just recently had time to get out all the weapons I have collected over fifty or more years, many were still dirty. No excuses, just lack of knowledge and time. Have recently started collecting hand guns and was needing guidance in taking care of them. The 22s are so dirty after firing and with oil like the owners manual suggested it is a gummy mess. Thank you RS

[@anthonyshoto1724]

Very impressive explanation ~ in fact, your series of uploads are first class. Thank you. From London, England.

[@GunBlue490]

Anthony Shoto1 I'm very pleased by your comments. Not everyone agrees with you. Thank you, Anthony.

[@edgybob1]

Thanks for all the years of experience information you are sharing with us. I try and share it with the gun forum I frequent.

[@GUNSHIPFLEX]

Love your videos. You and Hickok are the best on KZbin. Two different types of videos but both very informative..

[@fightjustice5602]

It’s a pleasure listening to you sir. I find myself relaxing as though someone is telling me a pleasant story!

[@shebear4715]

Fight Justice so true. He is a calming influence, especially today.

[@patrickstortz3949]

Best gun cleaning video I have watched, Thank you Sir!!

[@GunBlue490]

Thank you.

[@peterpherfinion6671]

Outstanding video and solid information. Thank you for your service Sir.

[@gogomas]

I absolutely agree. No magic or mystery involved in cleaning. I remember from my army days, no need to use any expensive stuff. We always used to clean the mags too as a matter of fact.

[@teefrankenstein4340]

Thank you for your videos, very informative and helpful.

[@garyK.45ACP]

Great video. 👍 I'm -old- experienced like you. I use about exactly the same tools and solvents. I agree with using cleaning jags over loop tips for bore or chamber cleaning. No need to drag a dirty patch BACK through the bore. Push it out and let it fall off. Loop tips are good for cleaning things like magazines. I usually just remove the wood grips and set them aside during cleaning (for guns with wood grips) Too much oil on anything is just a dirt/grit/sand magnet. Brushes...bronze brushes absolutely! Make sure they have a BRASS core (not steel) and a looped tip, NOT a cut tip. They will cost a few cents more. They are worth it. Don't use rifle brushes to clean revolvers. They can be too long to completely enter the cylinder "window" and you won't be able to reverse them and pull them back out! Use a shorter "pistol" brush. I've also been using silicone wiping clothes for decades! They work great!

[@boblack6557]

Just discovered your videos. Thanks for the time you put in to making these .I have learned so much

[@GunBlue490]

Bo Black Thanks, and don't forget to subscribe! I'll have more coming soon.

[@paulmicrons8416]

I'm one more person who needs to thank you. I was never taught or shown how to clean a firearm . I could guess but never sure , so Thank you for passing you're knowledge .

[@GunBlue490]

+Paul Microns Glad to be of assistance!

[@TheGoodLife62]

Thanks GB. I just found your channel and have been enjoying your videos. Thanks for taking the time to share a lifetime of valuable experience with others, I've always been overly concerned that I might not be oiling my guns properly, especially some of my older surplus rifles that I'd like to pass down to my son. Your videos have helped me to relax a bit. Thanks again!

[@CharlieGoy]

I've been struggling lately with the question of oiling my guns. What type? How often? How much? And everybody has something different to say. Once I heard this rationale for no oil being necessary, it all made sense. What a relief! Thank you very kindly.

[@romodig]

Excellent tutorial! Thanks much!

[@smilingbiter]

I just bought a Ruger SR .45 1911 like yours. I took it out and shot it as soon as I could right out of the box. I felt guilty because I didn't take it apart and make sure it was oiled. After listening to you, I'm going to follow your advice. By the way, before I bought my Rug was considering a Tauris loaded stainless and they had a video showing how to clean it. They didn't use any oil, just cleaned it and put it back together. I didn't buy a Tauris because I prefer a series 70. Your presentations are excellent, thank you.

[@russelder9743]

I picked up a Ruger SR1911-----------so far I really like it. I m watching your videos on cleaning it as the last time I cleaned a 1911 was Navy boot camp in 1975. Thanks for the time and effort you put in

[@GunBlue490]

It is a very good gun, which I believe has a number of notable advantages over the US model 1911 we carried back then. It features stainless, has an integral safety/slide stop spring tube, features a beveled magazine well, extended anti-bite grip safety spur, fabulous front and rear combat sights, close fitted barrel bushing, and more modern, tougher steel. With run of the mill loads, mine groups into the black with all shots on a 25 yard NRA slow fire target. With my own +P service load, using premium 230 grain jacketed bullets, it groups all shots into the X-ring of that target. I've never fired a 45 with greater accuracy, at any price. The slide has great "slide wiggle" which assures that it will never seize, as often occurs with tight fitting slides. JMB purposely designed that slide wiggle into his design, which has nothing to do with accuracy, but everything to do with dependability. As long as the barrel is fitted snugly within the slide, and the sights are solidly attached, it makes no difference if the slide is loose on the grip, as it always repositions itself exactly the same from shot to shot anyway. All that for a bargain price over other 1911s. Good luck with it!

[@russelder9743]

+GunBlue490 Thanks a lot for all your info----you have a great deal of know how and are an excellent teacher. Im going to go over your videos a few times as every time I watch I learn a little more. Wish I could sit down and talk and pick your brain on things thanks much and thanks for your service

[@dominicpetruzzelli3134]

There is no substitute for experience.....a lesson well learned from this guy

[@zackeaton9871]

Insightful and educating, thank you sir. Hope you make many more.

[@Tinstar2]

Thank you for your service.

[@PlatypusAurelius]

"There's no need to oil the spring. The spring is going to spring itself, regardless." LOL. I love this guy. Excellent advice.

[@josemonte495]

Great instruction and informative. Thanks

[@MPGunther1]

Thank you, Priceless information

[@padraic4594]

Fort Polk Bravo Infantry AIT. Another excellent video. You are so right. I learned the har

[@christophergrogan4644]

Well after the the social media purge I been binge watching these video at work. I wish I could of found more of these videos years ago

[@JamesJamersonIsAGod]

Same! I really have no idea how this man has never come up in my feed before, but better late then never I guess.

[@pjb9425]

Good thing I stumbled upon this video, thank you for posting it.

[@operator1018]

I asked my prior question to soon. You’ve answered it. Again, thank you.

[@THATMOFODIRT]

Outstanding video. Going to try the no oil method on my 1911.

[@uralbob1]

Love your videos, Gunblue490! Been cleaning and lubing all my guns since 1966 with no drama! Love the smell of Hoppes though! The smell reminds me of my childhood in the early 60's when I would clean and lube my single shot H&R .22 and my Stevens break open 20 ga. shotgun! I agree with your opinion on cleaning vs. lubing. You do one or the other, not both at the same time with the same product. Solvent is solvent. Lubricant is lubricant. Use some LSA if you want to lube your guns. I have some old LSA, but mostly, I just use regular mineral oil from a bottle that I bought back about 2005.

[@01100101011100100111]

Thank you for that short segment on magazine disassembly. I had a magazine that was gumming up and wasn't delivering the final round. I didn't know how to disassemble it, so I was just holding the follower down with a screwdriver and using a Q-tip with Hoppe's to clean around inside, hoping it would also clean the follower. Actual disassembly should be much easier and more effective.

[@legato4766]

"Guns don't have to feel slick, they only have to fire." You are the first and only person I've heard say this, and it makes a lot of sense. I am a new proud owner of a beretta, and I found this video to be very helpful. Thank you!

[@tonyt.1596]

Always great advice. Wish I had found your sight before I bought my guns.

[@ypres1917]

Thanks for a great video. Finally someone talking sense about the lubrication of handguns. I see videos out there for the Sig 226 and those guys are literally slathering the rails with grease - it's squeezing out all over the place when they rack the slide. I see guys at my club with heavily oiled guns - you can't touch them without getting oil all over your hands. I confess I do run a patch lightly coated with Breakfree CLP over the barrel and over the rails of my pistols, but it's just a very light film that is left.

[@GunBlue490]

Ross Henderson Your lubrication method is 100% perfect and requires no confession.

[@thormusique]

Thanks so much for demystifying this whole topic! We've all heard so many (often conflicting) cockamamie theories about lubing guns. It's wonderful to have someone with your experience and knowledge put this issue to rest once and for all! Now, I assume this same common-sense approach would apply to long guns as well, right? Thanks again!

[@padriac4528]

Thank you GunBlue490 for taking the time to create this (and your other excellent videos) to share you knowledge of firearms with others. Very good tips on how to maintain your firearms. Also liked your video on How to Oil and Lubricate Your Gun (and how NOT to). God Bless!!

[@yankmania]

Top man. Thanks for the information.

[@mosesbrowning8055]

i usually take a q-tip and drop oil on the tip and use that to oil everything, like a mini silicone cloth. i am with you i love using silicone cloths, i dont use them for my stainless guns but use them for all my blued guns and rifles to protect them especially where the barrel is in contact with the wood stock. definitely like your video and you look like a Ruger man like me, i carried my sr1911 for 2 years until i got my sr9 last week, much lighter lol

[@frankangelico8464]

Thank you for your high quality videos and sharing your knowledge. You are a patriot. Do you plan on making any videos on misfires & how to avoid them - especially the very dangerous squib load ?

[@knifenut6772]

"Not made of cupcakes". I love it. Great video. Thank you for your service sir.

[@DocRock83]

No disrespect intended but guns need a light coat of oil on areas of friction. It’s as simple as this: I recently took a glock to range and after about 50rds of so it jammed. I took it apart and applied a light coat of oil put it back together and fired 100 Rd’s or so without jamming. The whole reason I “carry” a gun is to defend mine and my family’s life. I need to be sure my gun will function correctly when I need to use it. If you don’t think your gun needs lubrications fine but my guns needs lubrication to assure smooth action, prevent rust and protect it while extending gun life by preventing wear which I feel lubrication does. Hell, I guess my car motor doesn’t need any lubrication because those metal on metal parts are just “marrying”. No, your gun doesn’t need to be wet with oil but they need a very light coating of lubricant.

[@mnrodriguez]

Agree 100%!

[@truthteller6701]

Sorry very poor analogy. Auto parts are not made from hardened gun metal.

[@dancruze]

@docrock83 I agree.

[@dancruze]

​@@truthteller6701what would be a better example? Imo.. The only reason to not lightly oil would be if the carbon or debris is collecting on the oil causing more wear and friction, etc..

[@lkrueger9494]

GunBlue - Thanks for this common man language concerning cleaning. Very simple. :-)

[@henrymeguess5579]

Last time I wrote was about scopes because with age I needed one for my Henry 22 later I bought my 1st semi auto pisol the Remington R1 .45. I love the weapon. It just feels solid. So tonight I started looking for proper cleaning. I have cleaned it once for practice purposes but Havn"t got to shoot it much so all that cleaning isn"t necessary bu I liked what you said about the oils and wiping down the weapon. Good video

[@geico1975]

Always learning as much as I can and following every suggestion, treat my EDC (Sig p365X) the way recommended here have never oiled it except the wipe down at the end with a flannel/cotton cloth I keep in a zip lock baggie, lightly soaked with basic mineral oil. Clean it with Hoppe's No. 9 and wipe dry. That pistol has run flawless and looks brand new after nearly two-years.

[@lesrinehartlr]

Smartest man on any firearm video truthfully

[@Mr1gun]

My name is Joe and I'm a over oiler..LOL I never cleaned my .22's, because as a kid I was told .22lr never need cleaning due to the bullet lube used. I did and still do clean all my other calibers meticulously. I started cleaning my .22's a few years ago and recently been using less lubricant on my firearms.

[@johnmpifer]

+Joe Simeone - I bet you're tempted to use 20W-50 in your car, too! LOL

[@Mr1gun]

Actually I do use 20-50 in my work van or straight 30 weight in summer. I guess I'm easy to read.. lol

[@royskaggs5750]

Nice job. Thank you. I like the idea of no oil.

[@34dawgsgo]

If the Ruger SR1911 is good enough for you, it will be fantastic for me being my 1st and only 1911. Thanks for your informative review sir.

[@wrightconnection1731]

That's what I was thinking too!

[@THATMOFODIRT]

Same here. Needed a 1911 and decided to go with a used SR1911 45. The deal was too good to pass up. Ran 300rds of various 230gr FMJ and HSTs. Not a single problem. Hear great things about Ruger’s customer service regarding any issues.

[@TheZotman5]

"You just clean the thing, and that's it." Fantastic quote.

[@williamholcomb5979]

Thank you all of your videos are very complete and informative. I have used wd40, also dry- labs in .22 magazine's. Everything you have taught is very vuble. You know we where issued heavy white oil/grease in militarily for M-16s and M-60 but m60s are in different categories I would say. You know well sometimes barrles would drop or bend down after a big long figh fight. Oh I am drifting off in to s whole other discussion. This is I know on hunting rifles and home owned fire arms. I don't realy remember that much about 50 cars and 30 cars. But I see everything you have said is right. I have been wrong in all my thoughts and ways of cleaning mostly oiling.. thank you for your highly-qualified knowledge of firearm care. You are very r y right...

[@beanalog8202]

Great video! Thank you sir!

[@Andy-im3kj]

I have newly subscribed to your channel, you are a wealth of knowledge for me!

[@flamesna4938]

thank you so much for the information

[@vikingtraveler2655]

I really enjoy watching your videos and you always put things into prospective. I just purchased a 9 mm CZ 75 SP-01. Do you have any videos on the CZ? Thank you sir.

[@bungalobill7941]

Now that is some no BS common sense cleaning advise and instruction. Very excellent. I also have a 1911 that I have never oiled , and it has never failed to run. If someone has one that is failing to run, it is not because of a lack of oil.

[@shebear4715]

@GunBlue490 Many thanks for all of your informative videos! I watched as you brushed your revolver barrel from the muzzle toward the cylinder, and am thinking that must be how to clean the barrel of both my revolver and my 10/22. Being new to shooting, and VERY new to semi-autos, I thought working that direction was a big no-no, but they must need it. Will look at your comments on bore snakes, which I have been using in place of rods on these guns.

[@JohnDoe-vq8bg]

Mineral spirits for carbon, brass bore brush, nilon tooth brush, cut up old t shirt patches, a jag, silicone rag and 3 minutes. Not a religion! Thanks for sharing!

[@josephcarr2742]

The jag follows the rifling turns as you push it through the bore, their all I use

[@josephcarr2742]

@Palm Coast Adventures you actually can but I don't you have to be careful of the muzzle of you pull it back I push through then remove it and go again, little more work but worth it.

[@pugilist102]

I just got done removing most of the oil and grease from my guns, including my AR. Thank you.

[@mnrodriguez]

Be careful!

[@franny5295]

@@mnrodriguez Why? I'm inclined to listen to people that have been there and done that but my manufacturers instructions expressly said there are six tiny places that need to be oiled lightly.

[@dancruze]

​@@franny5295I'll go with what the manufacturer says and oil. But yes, too much oil can pickup debris. So use the correct amount imo.

[@DS-gd1xw]

Good credientals being a certified armoror for Ruger, S&W. & Remington

[@anthonyrusso9173]

Gunblue: Again appreciate your expertise. I do go back to your KZbin channel a lot. I appriciate learning from you

[@greglinsmythe3375]

Love this guy’s shirts

[@TheReloaderDude]

Had to sub because of the humor. Oil collects dirt.

[@bengerman9736]

You da man, you forgot more about guns than most people will ever know....keep up the good info and see you on the next one.