Love Pythons. I had two back in the 80's, a 6" and 4" , both blue. Beautiful guns and so smooth shooting and accurate. Wish I still had them...
@tomfile31313 жыл бұрын
I ordered a 6" Python. Kind of wish I'd ordered a 4". BTW, it's not a nickel finish. It's polished stainless.
@clydefrog14873 жыл бұрын
the 6" is just so front heavy man.
@AlbertoJorgeSoares3 жыл бұрын
The new Python's barrel is 4.25''
@tomfile31313 жыл бұрын
@@AlbertoJorgeSoares Sometimes referred to casually as 4" or 6". No biggie......take care....
@AlbertoJorgeSoares3 жыл бұрын
@@tomfile3131 I thought you just didn't know it, that's all.
@tomfile31313 жыл бұрын
@@AlbertoJorgeSoares It's all good my brother....enjoy.....
@allamerican26053 жыл бұрын
This is my EDC. Galco Phoenix Holster Black. Looks just awesome. You have to train to improve your draw speeds, but one well placed or even not so well placed round will typically end the threat.
@Dontevenknowfam3 жыл бұрын
That’s .357 for ya! What rounds do you use? Imma 158 gr jhp guy myself.
@tomfile31312 жыл бұрын
That's a BIG edc gun !
@RolandsDad3 жыл бұрын
Proud owner of a 6" model, myself and I've been wildly impressed. It's a terrible way to begin owning revolvers because now I set the bar pretty dang high. I've had no issues mechanically with mine as others have reported. The only issue I had was that my rear sight set screw was not set, and I did it myself. No big deal. I have had a small handful of cosmetic issues that I will be addressing with the handgrip manufacturer. The Colt medallion on the right side is proud a fair amount, while the left side feels properly inset. The slot on the screw is also not square. While hard to describe in text; it's not directly down the center of the screw head. These haven't interfered with the function whatsoever, and it's run like a dream. Plenty of snap cap dry fires as well and zero issues on the lockup or opening that others have also reported. I've only fired 158g .357mag rounds through mine. What I have noted is that there is some play on the cylinder release lever that if gunky, can make opening tough which feels like the source of main issue there. It's a dovetail type fitment and it comes stock with a fair bit of play, to its detriment, and allows for more post fire junk to build up. Food for thought.
@tangero34623 жыл бұрын
Hope you have better luck than my buddy with his Cobra. He's had it back to them three times for various parts breakages in the last two years.
@sharkzf63 жыл бұрын
I was looking at the S&W Performance Center Model 627...now I got to think about this option...thanks! 🤔
@ta-uengYoutuber Жыл бұрын
It's in my dream, I want it. But in fact, I have owned the Ruger GP 100. The Colt Python still continues in my dream. It's price is more $5,500 in my country.
@GreenMountainDefense3 жыл бұрын
As a GP100 Match Champ owner I’d be interested in a breakdown video and parts list on improving that trigger.
@DavidGarcia-em6hk2 жыл бұрын
586 speedloaders work great with the Python
@jamesriggs62103 жыл бұрын
Impressive weight on that S&W in DA.
@gmro-ronosinski51023 жыл бұрын
Great unboxing CG! It will be interesting to see if the gun will stay in time with the .357 ammo and your projected overall round count. No doubt you will punish it! Carry on!!! 🔫💯👍🏼
@tomfile31312 жыл бұрын
The new Pythons are supposed to be more beefy and less likely to get out of time.
@caseyplunkett60832 жыл бұрын
I'm so jealous that you somehow I enjoy the QR code. I absolutely loath it.
@SullyCortez3 жыл бұрын
Between this... a nighthawk custom(Agent2)... and probably the first revolver I’m gonna buy, a GP100(9mm or 357?) thanks to u sir!, this is a dream. The Python was the first gun I ever wanted as when I was a kid playing Resident Evil for the first time on PlayStation, the character Barry carried a .357 Python. Man this thing looks amazing... thanks for this video! And interested to see the rest of the videos on this. PS- I’m from Connecticut and had no idea colts were manufactured here?
@RolandsDad3 жыл бұрын
Glad you brought up that game, honestly. I knew in the back of my gun nut mind that's what he had back then, but they've changed the skin on the newer renditions. That game is also what got me turned onto Beretta 92FS models. If/when I get one, I plan on getting some custom grips to match Jill Valentine's.
@SullyCortez3 жыл бұрын
@@RolandsDad hahaha yessss!!! I love resident evil everything about it was amazing. First game that turned me on to guns especially with Jills Beretta. Oh how about Weskers tricked out 1911. Lol. Still think Barry’s colt python was the most badass in the game. I remember going “9x19 parabellum rounds”... what the heck are those?? Lmfao
@SquaficleDude Жыл бұрын
I had my GP100 Match Champion by my side while cleaning one of my black powder pistols when you pulled out your GP100. I had to do a double take.
@matthaught47073 жыл бұрын
I'll be interested to see how that rear sight plays with AIWB.
@MrRevolver3 жыл бұрын
Well I'll probably make it rust for starters
@jamescampbell27733 жыл бұрын
DAMN THAT GUN LOOKS GOOD 👀
@MrRevolver3 жыл бұрын
Shoots good too
@jeffreymartin64513 жыл бұрын
Have all the issues been fixed now?
@justoldjoe93283 жыл бұрын
I'd be curious to see if the trigger pull is the same after you've put all the rounds through it. I know my 686 feels (subjective as hell) much smoother than when it was new. I have almost 1500 rounds through it so far.
@SeannoG13 жыл бұрын
Neat. That trigger is real surprising honestly.
@titanscerw3 жыл бұрын
I like the aesthetics (shooting some under 500 rounds with the old one), nice smooth way it shot. I dont dig pull back to open cylinder/reload. Preference goes to push buttons. Did not have opportunity to try new one yet.
@joe1340busa Жыл бұрын
3 mins to open the bloody box 🤤
@deathofkindness3 жыл бұрын
I really like the python
@glockmanracing3 жыл бұрын
Thanks! Love the revolver content.
@palerider964 Жыл бұрын
We know it will handle 38 special. You should've used full house 357 magnums all the way thru.😕
@MrRevolver Жыл бұрын
it's not the pressure, it's the speed of rapid double action that damages guns
@JohnCBobcat3 жыл бұрын
Really looking forward to the rest of this.
@UziNineMillomeetah3 жыл бұрын
Beautiful!
@lobstereleven46103 жыл бұрын
ahhh... this is my therapy :)
@borkwoof6963 жыл бұрын
This gets me excited
@stevencali35393 жыл бұрын
Yesss. Carry it.
@teabreak30063 жыл бұрын
I wonder if the frequent misfires have been improved.
@MrRevolver3 жыл бұрын
It did 160 rounds today with including some Armscor and Fiocchi primers with no issues
@brianb9003 жыл бұрын
Mine with a 4000 serial number that I bought back in July has shot right around 300 rounds of various .357 and 38 flawlessly.
@bobwhite46713 жыл бұрын
How long did you have to wait to get it?
@MrRevolver3 жыл бұрын
A couple of weeks
@chrisv21743 жыл бұрын
I just want to know when they are going to release the python snubbies.....
@hugoanibalperalespuentes65933 жыл бұрын
I think that with HKS speedlaoders would fit well in this new pthon, even the ones for L frames. The ones for Python would be more sure that fit weel in it. (forgive my bad English)
@CarLoverPhotography3 жыл бұрын
I have one in all flat black looks nice
@JuncTown-3 жыл бұрын
Nicely done sir, thanks for the video.
@henrysitosaldua58692 жыл бұрын
How many dollars Colt python.?
@MrWmeyer3 жыл бұрын
Gotta stop watching your videos...watched this one 2 weeks ago, picked up my new Python 2 days ago...you are a bad influence on me!!!
@yank9810010 ай бұрын
What model was the black revolver with the red dot?
@brendanbernard59463 жыл бұрын
Is the trigger weight and feel comparable to the newer cobra and king cobra?
@theimpaler2317 Жыл бұрын
Which oil is it that you prefer? Speaking of the gun, I haven’t watched the video yet though I will right now, I’ve been looking at prices online and I see some going for like 1500 and then some that are like 3500. I’m guessing it’s the older ones that are more expensive?
@jltsvlogs1837 Жыл бұрын
Just got mine today paid 1599 1705 after taxes
@palerider964 Жыл бұрын
Lucas oil 🛢 is just fine. Perfect consistency.
@bears85653 жыл бұрын
The rear sight stinks should have put a Ellison sight on it or the original colt sight
@John19113 жыл бұрын
I’m down. Looking forward to this. A couple thousand rounds isn’t really a lot of rounds. But.... When you realize most folks on the gun forums don’t actually shoot much? This should placate them.
@fastmako3 жыл бұрын
Sooooo jelly! Great review mate!
@dbmccann93 жыл бұрын
Looks pretty cool, any updates? How sturdy is the ejector rod?
@MrRevolver3 жыл бұрын
It's sturdy enough to whack, slap, strike, pop, or smack. Just don't hit it like an asshole.
@johnbrowningsghost65963 жыл бұрын
I hate MA, but I also hate Colt for not getting the Pythons approved for sale in MA. I don’t really have any interest in the older snake guns beyond aesthetics, but I really want a new one to kick around.
@johnbrowningsghost65963 жыл бұрын
@blake Burns lol yes that will solve the problem. I should uproot my life, get rid of my house, my family home and business of three generations, and move somewhere else just to buy a revolver. Checks out. 👌
@johnbrowningsghost65963 жыл бұрын
@blake Burns Huh, that's funny because I have a degree from MIT and I run a company/design complete systems for neurosurgery. I guess I should sell my company move to another state and see about setting up a lemonade stand, Blake. FYI Colt has a long history of simping for gun-control and not selling to the commercial market, but I am sure you know all about that.
@johnbrowningsghost65963 жыл бұрын
@blake Burns MIT isn’t an Ivy league school, smart guy. Colt has been neutering it’s commercial rifles long before 94 they preemtivly started removing killy-features in the late 80’s and made their lowers incompatible with their military counterparts. They’ve always had ass-backward policy’s toward civilians and quick to bow to gun-control efforts. Their refusal to release their latest designs and failures to innovate is the reason why their business went in the shit-can when mil/gov sales dropped off.
@TheGV50 Жыл бұрын
Hey Kaleb are you still working for Taurus?
@MrRevolver Жыл бұрын
Yes
@jeeplife20353 жыл бұрын
It doesn’t seem like the Python didn’t make the grand comeback everyone hoped it would have for some reason.
@Coltpython19812 жыл бұрын
It’s pretty solid took a year wait to get mine without having to go on gunbroker and pay double the amount I paid for mine .
@jeeplife2035 Жыл бұрын
@ARMORER1911 well said !
@josephliptak Жыл бұрын
Yea it has, most FFL's can't stock them fast enough.
@mozzberg5903 жыл бұрын
My dad grabbed a new Colt last month, I was not impressed. Oh, GBX5600 G Shock. Nice
@John.VanSwearingen3 жыл бұрын
8-shot 9mm Anaconda when?
@drewgates11673 жыл бұрын
Theres an 8 shot n frame smith right now!
@YoungT7033 жыл бұрын
What's the name of ffl dealers name? I need that gun
@MrRevolver3 жыл бұрын
This is a writer's sample that I got direct from Colt, which means when I'm done with the review I either have to send it back to them or pay them.
@carlorsolorzano89433 жыл бұрын
What revolver is the black one?
@MrRevolver3 жыл бұрын
That’s a S&W 586 L-Comp that has been tuned by a custom gunsmith
@carlorsolorzano89433 жыл бұрын
@@MrRevolver ok thanks for me that one is the best revolver and the manhurim mr 73
@JoeBuck-uc3bl3 күн бұрын
Wow that case is CHEESY!!! A Ruger GP100 case is nothing spectacular, but still much better than that. Colt Python is way nicer than a GP100, damn the case should also be nicer!
@ronaldhahn48413 жыл бұрын
Thank You Caleb for the video varry nice gun. I will be checking out prices on that one. 😀
@skeeter87233 жыл бұрын
You couldn’t be more feminine
@MrRevolver3 жыл бұрын
what an odd comment
@davidelliott30193 жыл бұрын
@@MrRevolver You are odd--
@circleofsorrow45833 жыл бұрын
Are you knocking on his closet?
@jakass3 жыл бұрын
@@MrRevolver Honestly, it's the most agreeable thing I've seen in the comments and off your video