How to Change Oil Kawasaki Brute Force 300 4x4 ATV Four Wheeler

This is an easy job to do yourself. Just need 1.9 quarts of oil, 17mm socket, and a drain pan. I hope this helps you take care of your four wheeler!
List of supplies I used to do this job:
Mobile 1 10W-40 Oil - amzn.to/3NChWQ6
Garage Boss Oil Container - amzn.to/3RzzFZh
3/8 Craftsman Short extension - amzn.to/487skaC
17mm Socket with Ratchet - You should already own this!
As an Amazon Associate I earn from qualifying purchases. Affiliate links are often provided in the video descriptions and comments on this channel. #ads #commissionsearned

[@hudsonhollow]

As a life long Honda and Kawasaki tech, I've seen many engines destroyed by well meaning people. This strainer system is used in many types of motorcycle and ATV engines. It's a MUST to clean out the cavity before reinstalling the screen. Several times I've had units come in with grenaded engines, because someone pulled the strainer and put it back in without checking the cavity. The screen had done it's job. but now it has been bypassed and debris in the cavity is shoved into the oil pump. Also, a cheap torque wrench is a very good investment. You don't have to buy the best. I've had to deal with far too many stripped drain plugs.

[@ApacheRanch]

Great points! Thanks for sharing!

[@benjamincharley7195]

What "cavity" are you talking about? The one on top of the oil screen? Or inside the engine? Thanks.

[@Dudderbog]

Thank you I flooded my four wheeler and all it needed was a oil change

[@merlingrc]

Thank you. I was not aware of the second drain plug only the one with the filter and I was not sure on which way the filter went thank you again.

[@ApacheRanch]

Glad it helped!!!