Gunpla Custom Build / SAZABI Ver.Ka LEG Part 01 - Panel line scribing

◼︎ 제작의뢰 및 완성작 구매 문의 (Commission & Purchase Inquiry)
[e-mail] or instagram DM (ravi_pla)
Notice - blog.naver.com...
◼︎ instagram
/ ravi_pla

[@RAVIPLA]

◼︎ 제작의뢰 및 완성작 구매 문의 (Commission & Purchase Inquiry) [e-mail] or instagram DM (ravi_pla) Notice - blog.naver.com/jackers7/222348230829

[@jringhisen]

Best features of this video: 1. Listing the part number 2. Listing the tool used for each step 3. Double checking attachment points 4. Before and after shots of each line and the part as a whole. You're my new go to tutor for taking my customizing to a whole different level.

[@atthuryunan2642]

Nice video. Best gunpla custimization tutorial video i've ever seen. You should get more acknowledgement from gunpla builder out there. A lot builder make video kind which is show off rather than turoring, that we (beginner gunpla builder) don't have a clear idea about how and they customize their gunpla.

[@RAVIPLA]

Thank you for the compliment. 😃I hope my video will help many beginner gunpla builder 😄

[@chrishernandez8768]

Thank you sweet baby Jesus for someone actually coming out with THEE ACTUAL BEST Gunpla tutorials on KZbin, you rule dude!

[@RAVIPLA]

Thank you for thinking that way. 😃

[@hazardbrewing2821]

@@RAVIPLA I hope these keep coming. I'm interested to see how someone much more skilled than I masks and paints these up.

[@RAVIPLA]

@@hazardbrewing2821 I will upload the painting process later. 😃

[@RayFChung]

Thank God I found your channel again. I stopped building for a little bit but remember a channel thst did amazing scribing tutorials and mods but couldn't find it until this video popped on my feed. Amazing work ravi seriously

[@RAVIPLA]

Thank you so much ! nice to see you again :D

[@arin26nexus]

now i have my reason to get sazabi ver ka after seeing repeatly all the videos you've upload..nice tutorial👍🏼

[@MidnightHatter]

Your work is great! You've inspired me to practice my skills and make videos too! Please keep sharing!

[@RAVIPLA]

I'm glad I can help you. 😄 I've subscribed to you :)

[@user-eq9dd2ge1m]

볼때마다 엄청 잘하시는구나 라고 감탄만 할 뿐 엄두도 못내서 해보지도 못하고 눈팅으로 공부만 하고 있어요 ^^ 좋은 영상 감사합니다 ...

[@nomankw]

Maaan your work is amazing and I'd love to be a quarter as good as you, someday. Right now it's the hardest part of building for me 🤣

[@iryairya2008]

Beautiful design! So professional

[@RAVIPLA]

Lain Lain thanks 😁😁

[@OfficialPhazeMusic]

I’ve learned so much from your channel! Thank you!

[@marsgaming7914]

Been following these works since in you’re IG... 👍 literally a master piece.

[@RAVIPLA]

Wow !👍 Thanks 😀😀

[@marsgaming7914]

RAVI PLA Cheers brother 🙏 keep it up 👍

[@CH-yp4eb]

Can't wait to see the finished Sazabi !

[@RAVIPLA]

I'll try to finish it quickly. 😀

[@signal_rr]

Saw his ig along with another dude that both had ridiculously amazing scribing and sculpting skills.

[@RAVIPLA]

Thank you for the compliment. 😄

[@wongsiukwok8247]

Great jobs! Definitely master piece. Please kindly keep on sharing more!

[@RAVIPLA]

Thanks 😃I'll upload it steadily

[@roveism]

sooo goooooooooooooooooooooooooooooooood

[@OfficialPhazeMusic]

Very cool!

[@lastchancebitch1314]

Hi... your work it's amazing... what clear tape are you using. And where do you get the chisels???

[@RAVIPLA]

Please watch this video. kzbin.info/www/bejne/q5ncYnStnrKVqLc

[@reuven1997]

I loved your Sazabi tutorials. I'm just curious. Did you prime before you added details? And then you sanded it down again? Sorry, I'm kind of confused. I'm a beginner and I want to learn more. Hope you notice my comment. Thank you and more power! 😊

[@andreaburatta658]

You make things look so easy. Thanks

[@RAVIPLA]

Andrea Buratta I'm glad I can help you. 😃

[@jovintagle2372]

You sir are a legend.

[@RAVIPLA]

thanks :D

[@user-uq6cm9dx1f]

I have a question to ask that it's puzzled me a lot. How to build the feet as you did? I watched all of your video, but it's not mentioned.

[@jamesleighsuarez143]

Nice

[@mydemon]

Have you considered wearing some of those cut-resistant gloves? I just bought a pair for 12 bucks. they prevent cuts from a slip of the knife.

[@gogotrololo]

He does not wear the protective suit because he plans on being precise and successful. The added danger just makes him better. It is in the spirit of Char

[@ChillinFuckinSippin]

This is godlike

[@RAVIPLA]

Thanks 😃

[@user-et1hw5ob7d]

와우ㅋㅋㅋ다 외국분들 댓글만ㅋㅋㅋ 어마무시하네요 잘보구 갑니다

[@RAVIPLA]

인스타에 외국인 팔로워가 많아서 그래요 ㅎ 방문해주셔서 감사합니다 ^^

[@asakimD]

라비님 체널보면서 페널라인 뽕맛을 느꼈는데 bmc가 최고긴하네요. 타사제품쓰면 확실히 느낌이 영~~~ㅎ 그런데 0.15mm를 뽀각해서 큰일이네요ㅜㅜ

[@MusasinoPLAmodel]

앞으로 좋은 영상 자주 부탁드립니다! 화이팅!

[@RAVIPLA]

Musasino PLAmodel 앗 무사시노님 감사합니다^^ 채널 구독해서 잘보고 있습니다^^ 최근에 연기하신 영상도 아주 재미있게 잘봤어요 ^^ 😀 방문해주셔서 감사합니다^^

[@MusasinoPLAmodel]

아 ㅋㅋ채널을 보자마자 구독했구, 기대가 큼니다^^ 많이 배울께요.

[@RAVIPLA]

@@MusasinoPLAmodel 제가 많이 배우고 있습니다 ^^ 앞으로도 좋은 영상 많이 부탁드립니다 ^^

[@2049_auu]

영상 잘 봤습니다!! 영상에서 붙이시는 테이프는 일반 테이프인가요?

[@alfrizadaffa1452]

As usual, awesome work man, i like it 👍👍

[@RAVIPLA]

Thank you for the compliment. 😃😃

[@Tuf_frijoles]

Nice work

[@Scott_A]

Excellent work as usual. Could you put some links to those chisels that you use please

[@urgentquest9397]

Awesome panel line tutorial!! I noticed you used 0.5mm chisel to create a groove at the bottom of the Sazabi’s foot. I want to achieve this outcome on 144 scale gunplas. Could you tell me what sizes of bmc I may need? Cause you know, they are not cheap. Thank you!

[@RAVIPLA]

Urgent Quest sorry.. Where exactly are you talking about? 😭

[@Schjoenz]

That 0.5mm chisel looks like 1mm to me.. And the 0.2mm looka like 0.5mm.. I have created my own chisels. So I'm wondering if the chisel you have is acurate or maybe I am just seeing and estimating it wrong

[@bentan147]

Hi! This is fantastic work! I'm very keen to start on doing scribing myself. But i have a question....... Scribing to custom on one side is hard but not too bad. But how do professionals like yourself especially with the amount of scribing work done to a right leg managed to do it identical to the left leg in terms of measurements & especially the angles of the lines? This is the portion that i wonder always as doing one side is hard enough but doing both sides the same is crazy work. Hope you can share your technique & advise as so far in the video we only see it being done on one side. Cheers & keep up the fantastic work!

[@RAVIPLA]

Ben Tan kzbin.info/www/bejne/g3nap3-Vr8pprtE I don't know if this video will help you. Duplication the panel line is a difficult and hard work for me, too. 😭

[@bentan147]

OMG! I just saw your other videos & you were teaching how to duplicate it. Its crazy man but again you are doing a fantastic job as well as the video for people like me to learn the process!!!!! Keep it up man!!!! @@RAVIPLA

[@RAVIPLA]

It's hard for me to duplicate panel lines, too. So, I often work with my eye measurement. But from the naked eye, I am satisfied if it looks the same... 😅

[@christianbunyi2721]

More vids pls 😁 Awesome vid by the way 👌

[@RAVIPLA]

okay. thanks 😄

[@user-nr2gt2he1k]

카페에서 보고 구독눌렀어용~

[@RAVIPLA]

송준희 앗 감사합니다^^ 도움되실수 있게 좋은 영상 올리겠습니다^^

[@IconicProps]

Can you show how you fix a mistake? Do you have multiple kits? What can fill it and then be scribe again? Asking for a friend.

[@Highstakeshobbies]

This is amazing!!

[@RAVIPLA]

Thanks Simon Lam 😄

[@healingpla]

영상 잘봤습니다. 대단한 작업입니다. 한가지 궁금한게 좌우 대칭도 그냥 눈대중으로 스케치를 하시는 건가요?

[@RAVIPLA]

좌우 대칭은 주로 디바이더 공구를 활용합니다. 나중에 영상을 찍어볼께요^^ 시청해주셔서 감사합니다 ^^

[@normanbeaulieu4204]

What were the clear sanding sticks you used I never seen them before

[@RAVIPLA]

This is an acrylic stick with a sandpaper. See this video. from 8:40 kzbin.info/www/bejne/q5ncYnStnrKVqLc

[@DV91]

Awesome. Where can I get these tools?

[@thanhhai5966]

That so nice keep trying. Good luck to you :3

[@RAVIPLA]

Natari Odes thanks :)

[@januaryushaknikiyuluw7276]

Amazing work

[@RAVIPLA]

Thanks 😄

[@januaryushaknikiyuluw7276]

if you dont mind, can you make a series of these detailing u made from head to toe, begining till the end?? i think that would be amazing

[@RAVIPLA]

I'm going to continue uploading the process of making it 😀

[@waouighaeoua541]

What tool is he using for that much thicker panel line?

[@vuluong6890]

⭐⭐⭐⭐⭐

[@RAVIPLA]

Thanks :D

[@Alex-nd2dr]

Hi do u wear glove for video purpose or u wear it most of the time? Would'nt it gets uncomfortable?

[@RAVIPLA]

I'm uncomfortable right now, so I take off my gloves and work on them. I used to wear it to protect my hands.

[@garrettkelley8594]

what is the clear material he is using to make the lines?

[@_gunny5300]

따라할래야 따라할 수 없는...

[@ahmadfaris8044]

Helo sir, please show us how you make symetrical on right and left side.

[@infinati]

So sick

[@RAVIPLA]

infinati thanks 😃

[@Myexoticexperience]

Awesome job man! Keep it up, im following you in Instagram also.

[@RAVIPLA]

thanks 😁😁

[@JKMT]

Whats the plastic flim he is using called

[@don_a_than6217]

How do you actually make it that greying colour ?

[@gidigidigidi3337]

it look like starwar

[@RAVIPLA]

I think so, too. 😄

[@mobileandhostile7895]

⭐️⭐️⭐️⭐️⭐️ 😎 👍

[@RAVIPLA]

Thanks 😄

[@captainmemory2108]

Wow

[@RAVIPLA]

Thanks 😃

[@captainmemory2108]

RAVI PLA ...ur welcome...👍

[@katakuriplays6687]

Why do we need to put a scotch tape before scribing? Thank you sir

[@RAVIPLA]

It's not a Scotch tape. This is a scribing guide tape. To draw the panel line straight.

[@thedinosaurkidharun6533]

How much force do you usually used when using the chisel?

[@RAVIPLA]

Press gently a few times at first. And press hard.

[@AnhMinhDINH]

Thanks a lot, could you please show the tool list (name, brand, specs)?

[@RAVIPLA]

okay, I'll take a video later. 😃

[@jamescody7956]

You got a sub from me!

[@RAVIPLA]

Thanks 😀😁I'll upload it steadily.

[@rajbirsaini6350]

Which grade are you using

[@noblord8643]

What tape did you use for guiding the scribber? Seems stick to the parts strong enough..

[@RAVIPLA]

i used HIQPARTS carving guide tape 3mm 😀

[@noblord8643]

Thx nice info..

[@byronpocock8059]

egrish?

[@bengkiatyap6751]

Do you use more 0.15mm or 0.2mm for normal panel line?

[@RAVIPLA]

Beng Kiat Yap Sometimes I use it. It is useful to mix with 0.15 or 0.2. 😃

[@kp0pp3r]

I would love to get a tools list video

[@RAVIPLA]

I'll make it later.😄

[@okiodesign1844]

Hi, can I post your video on my Facebook fans page?

[@scottvaldez6699]

How many bmc chisel mm do u use ?

[@RAVIPLA]

Use 0.15,0.2 for thin and 0.5 for thick mainly. Also use 1.0 or larger sizes for sculpting purposes.

[@fadlyfadlan5781]

Bro.. Prime first or scribe first??

[@RAVIPLA]

scribe first. I sometimes primer first and scribing. The reason is to easily check for shrinkage on the surface when sanding parts. Sprinkle primer again after scribing

[@fadlyfadlan5781]

@@RAVIPLA thanks brother👍

[@user-dt3hq4lj5p]

패널라인팔때 붙이는 테잎은 어떤건가요?

[@RAVIPLA]

꼭단디해라 투명한 가이드 테이프 입니다. HIQ parts guide tape 3mm 사용합니다^^

[@alentor]

Can you please tell me where I can buy the carving tools you are using?

[@RAVIPLA]

alentor I bought it at a model mall in Korea. I'll give you a list of tools later.

[@alentor]

@@RAVIPLA much appreciated! Thank you

[@RAVIPLA]

alentor you’re welcome 😀

[@RAVIPLA]

alentor I plan to make a video of the tool list.

[@alentor]

That is great! Thank you

[@noblord8643]

What brand sanding block did you use?

[@RAVIPLA]

It's a sandpaper attached to an acrylic stick.

[@noblord8643]

Handmade? Cool..

[@RAVIPLA]

kzbin.info/www/bejne/q5ncYnStnrKVqLc from 9:54