Iron Sight Accessory on the Leupold DeltaPoint Pro

[@Brockdorf]

thanks, mine was almost impossible to take the plastic part off

[@yrsued]

What happens is that the two set screws damage the plastic insert and it gets wedged in the slot, you have to be very careful to remove this part!!

[@georgestratakos4161]

I’m having the same issue. How can I remove the plate? I removed both set screws and it’s still wedged in there.

[@onseki1774]

This little bit of steel is like 40% of the reason I got a DPP, you have a wide margin of error in buying a front sight on pistols because you can just adjust the elevation until its perfectly aligned. it's also windage adjustable, which although you probably won't need it, is pretty helpful. The best part is that you can have your slide milled all the way down to the bottom of the factory sight dovetail, bringing the whole package farther back and lower.

[@yrsued]

YUP, There are so many Dot Milling services now, I will be reaching out to Springer Precision, they are doing it now too!!

[@jedermachtigallmighty7345]

Wow, thank You for sharing 👍 Good to know about Leupold

[@yrsued]

This is a good and very versatile Red Dot!!

[@scott2228]

Nice!!! This might b the reason I go with Leopoldo over Trijicon for my M9A4.

[@yrsued]

Leupold has been a classic now for over ten years!!

[@elredo7277]

Thanks for the video. I'm thinking about this sight and wasn't sure if it was adjustable for elevation.

[@yrsued]

Both Windage and elevation!!

[@YTusername4]

Awesome details and info. Many thanks!

[@yrsued]

I'm goad this video was helpful.

[@janvodros8238]

Another perfect video Yamil. Thanks

[@yrsued]

My pleasure!!

[@PaNDaSNiP3R]

Do that have anything like this for pistol optics? The canik tp9 loses it rear iron sight for the optic but I want to keep it

[@yrsued]

There are pistols out there that will accept this footprint. I don't know if the Canik will accept the Deltapoint Footprint though. I wish I did, but I don't.

[@Sduell60]

Lol I wondered why the cover was so long, now I know. Oh, and I'm going to order one.

[@yrsued]

It is a GREAT accessory!!

[@Sduell60]

@@yrsued I hope so. 👍🏻

[@yrsued]

@@Sduell60 I fought it to be VERY useful!! Especially with the PC Carbine!!

[@TNaseiro]

Any chance you could post a follow-up video showing if this set-up worked out?

[@yrsued]

I did, there is a video where I use all the upgrades into one video!!

[@TNaseiro]

@@yrsued thanks for the reply! I found the video you mentioned. I’ve been looking for a red dot that would cowitness with the existing iron sights. I think I’m going to go with this set-up.

[@yrsued]

@@TNaseiro There's a couple good Red Dots capable of Co Witnessing, but this one is the most reliable and versatile one!

[@bkwil6078]

Looks like an afterthought

[@yrsued]

I get what you're trying to say, but, if it was an afterthought, why have the Dovetail on the sight to install the Iron Sight on it?? IT was designed that way, but remember, the Deltapoint and the Deltapoint Pro were just about the first Red Dots that were mounted directly on firearms, they were just about the first Micro Red Dots out there. Technology has changed so much since these came out.

[@KendrasEdge757]

Are you kidding me Yamil?!!? They removed these two AGAIN ALREADY?!!? Damn KZbin!!

[@yrsued]

What do you expect??

[@yrsued]

They don't remove them, they just take our money away!!

[@AldapesExpress]

My iron sight keeps siding down regardless how hard I screw it

[@yrsued]

Weird, I've had mind now for a couple of years and it has never moved on me!! Contact Leupold, they might be able to help!!

[@stllda909]

For the amount of money that is cost you'd think it would have dots on it. Not all black making it more difficult to line up your shot.

[@yrsued]

That is a matter of taste there. Personally, if you look at my other Videos, I prefer Black Rear Sights. I have gone to the extent of taking a Sharpie and Blackening out the Rear Dots on several Pistols to get the Black Rear I have trained with at Gunsite.

[@bhief473]

All black rear/small fiber optic front is optimal for distance shooting 25 yards +

[@meschker0507]

Agreed. I own this for my G45 and I love it. Even before I had a dot, I always preferred a glowing front sight with blacked out rear. All your vision is directed to the front sight, which is where you should be looking anyhow.

[@Mike-4547]

When you tighten the screws you should have did each one a little at a time. Just saying.

[@yrsued]

And how do you know I didn't do that??, the video doesn't show how I did it that well, but that is what I did

[@chrisbehrens7166]

Hahaha just saying.

[@JohnDoe-zg6fn]

👍👍

[@yrsued]

It is a good accessory

[@lancelemay6971]

I have the DPP mounted on my Walther PDP. Considering this as part of a ⅓ co-witness setup but you must change out the front sight also. The question is too what? How tall should it be?

[@yrsued]

This is one of the mysteries of co witness, it all trial and error. I’m sorry to say that I’m not familiar with any of the modern Walther firearms.

[@onseki1774]

You kind of have to just know somebody who had the exact same milling done. My machinist told me for glocks a dawson .415" is ideal, but only with his specific millwork. If you're into gunsmithing you could get a massive .500" sight blade and just file it down with a ceramic/diamond file until its perfect and then black oxide finish it. Doesn't take the long to file .06-.08"