The Bondo Trick You Don't Know Part 2 - Work & Finish Filler 3x Faster !!! - DIY Auto Restoration

  Рет қаралды 113,806

Guzzi Fabrication - D.I.Y Auto Restoration

Guzzi Fabrication - D.I.Y Auto Restoration

Күн бұрын

Пікірлер: 251
@skipragsdale3565
@skipragsdale3565 20 күн бұрын
Yes! That's the way that I was first taught to Mud, back in the early '70s. I've never used a frame with the half round cheeze-whizzer either, just with the flat files they're difficult to hold otherwise. Like you show, we've always used a board to support the 40 - 60 grit. The Crepe Rubber squares that they sell at the wood workers stores to unclog sandpaper works great to unclog the Mud from the paper. You got yourself a new Subscriber!! Thanks for the Bondo tips, I liked the one with adding the fiberglass resin to the Bondo!!
@guzzifabrication3448
@guzzifabrication3448 20 күн бұрын
Thanks ! I never use a holder for the half round, I thought it would be to hard to explain how to do it without the holder..... Thanks for the sub and WELCOME to my channel !!
@Whitecranekungfu
@Whitecranekungfu 10 ай бұрын
Thank You. Im the guy trying to rebuild a 62 Merc Comet. Im working on a Theme Park pay budget. I was gonna use the less is more method. You are a well spoken, easy to understand and speaking slow. Thank you.....
@guzzifabrication3448
@guzzifabrication3448 10 ай бұрын
If you have any questions, leave them in the comments and I will try to help. Thank you for supporting the channel ! Good luck on the Merc !
@tonymartinez15949
@tonymartinez15949 Жыл бұрын
Do you know you’re the first guy that I see that teach that I learn that in the 90s from my old school guy? I’m glad you brought it up
@guzzifabrication3448
@guzzifabrication3448 Жыл бұрын
Not alot of new guys have seen this, just passing it on, Merry Christmas
@luckyvids
@luckyvids 10 ай бұрын
Hey man, it's great that you're teaching the young generation the right way of using body filler. This video brought me back to the 70s when they used to call me the bondoman. You're doing it exactly the way we did it back then. The only difference I see is that we used to move the chess grader, or the sanding block, in a cross motion to leave the surface completely level, it's very important if you're doing a whole door or half a hood.
@guzzifabrication3448
@guzzifabrication3448 10 ай бұрын
Thanks !
@WilliamTillman
@WilliamTillman Ай бұрын
Man , I can’t thank you enough for sharing your knowledge
@guzzifabrication3448
@guzzifabrication3448 Ай бұрын
@@WilliamTillman thank you for the comment this is a really old time buddyman trick just passing it on if you just correctly and greatly reduces the amount of pinholes if too much resin is added it will have a negative effects
@robaxelsson530
@robaxelsson530 Жыл бұрын
Been using cheese graters for years..learned it’s better to apply 3 thin coats rather than 1 thick also.. discovered a wire coat hanger (bent in half) is good to “beat” filler out of clogged sand paper..
@guzzifabrication3448
@guzzifabrication3448 Жыл бұрын
I haven't heard the coat hanger one before. Thanks for the comment and have a great new year
@robaxelsson530
@robaxelsson530 Жыл бұрын
@@guzzifabrication3448 yeah, used old filler to make a “handle” for the wire…
@jimmypickett9912
@jimmypickett9912 8 ай бұрын
I appreciate this video.
@guzzifabrication3448
@guzzifabrication3448 8 ай бұрын
It will make your life easier if you use correctly.I appreciate your comment.Thank you Sir!
@MrJoebiz24
@MrJoebiz24 3 ай бұрын
First, the adding of Resin to the bondo video. Now, the shaping process simplified. The education I just received is priceless.......
@guzzifabrication3448
@guzzifabrication3448 3 ай бұрын
@@MrJoebiz24 That's awesome, Thanks !!!
@UnconventionalMetal
@UnconventionalMetal Жыл бұрын
Even though I’ve read about using a rasp, you confirmed that I need one when I start on my project.
@guzzifabrication3448
@guzzifabrication3448 Жыл бұрын
It will make life much easier , Merry Christmas !
@douglash3129
@douglash3129 4 ай бұрын
Hey, I used this method on the whole side of my 65 Chevelle, I didn't use the cheese grater, I used 40 grit with a long board, primer filler and blocked it and primed it and blocked it and the end result was laser straight panels! I feel the more you sand that filler with finer grit paper, the more of a chance your gonna put waves in it! Just my opinion! Thanks Man!👍👍
@guzzifabrication3448
@guzzifabrication3448 4 ай бұрын
@@douglash3129 Awesome !!! Thank you for the feedback !
@LittleCobra-eu9cx
@LittleCobra-eu9cx 2 ай бұрын
Why does my glass or puddy get hard so fast
@ericschulze5641
@ericschulze5641 Ай бұрын
​@LittleCobra-eu9cx Depends on the temperature, the hotter it is the less hardener you use, mix a small amount note the color when you get the results you want
@rarefiedhermetic792
@rarefiedhermetic792 4 ай бұрын
As a semi retired guy looking to learn to restore cars for a hobby, these instructional videos are great! Short, to the point, and very clear and simple to understand. New subscriber here.
@guzzifabrication3448
@guzzifabrication3448 3 ай бұрын
Welcome to the family !! thanks for the subscription. I think this is video 204? check out the playlist. Thanks again.
@russdavis1960
@russdavis1960 Жыл бұрын
Yup. Been using a 'half round' rasp for a lot of decades. One thing I'll do to clean it our is to simply use the wire brush portion of my bench grinder. I can't recall when I bought the last rasp...but it's been a long time. Thanks for posting.
@guzzifabrication3448
@guzzifabrication3448 Жыл бұрын
Thanks @russdavis1960 ! Merry Christmas !
@toyotas4ever
@toyotas4ever Жыл бұрын
We called them cheese graters.😂 Yes, these are a great tool to use!
@guzzifabrication3448
@guzzifabrication3448 Жыл бұрын
Thank you Sir ! have a great new year !
@samuelsmith2522
@samuelsmith2522 Жыл бұрын
I'm entertained and educated from your videos! Keep up the good work
@guzzifabrication3448
@guzzifabrication3448 Жыл бұрын
Yes Sir ! Merry Christmas
@gregculverwell
@gregculverwell Жыл бұрын
Where I live they are know as a Surform - the Stanley brand name. I've used them for many years - life is too short to have at it with sandpaper. Even if the filler has hardened, it still takes lumps off easily.
@guzzifabrication3448
@guzzifabrication3448 Жыл бұрын
Thanks for the input ! Have a great new year !
@bentaxelrod
@bentaxelrod Жыл бұрын
Yep it works. Been doing it since 1978. Good advice.
@guzzifabrication3448
@guzzifabrication3448 Жыл бұрын
Just passing on old time tricks. Have a great new year !
@jeremyolson2596
@jeremyolson2596 Жыл бұрын
Another excellent video. Merry Christmas brother! Back here in Springs
@guzzifabrication3448
@guzzifabrication3448 Жыл бұрын
Thanks brother ! hope you guys have a great Christmas !
@lyngreen5801
@lyngreen5801 3 ай бұрын
Oh this is brilliant….i only want to do a mower bonnet, female 70yrs old, I feel a new hobby coming on. Lovely voice, clear, precise full explanations….perfect. 😊❤
@guzzifabrication3448
@guzzifabrication3448 3 ай бұрын
I glad you enjoyed the video ! Thanks !!
@jonathanvidal3073
@jonathanvidal3073 Жыл бұрын
Thanks for another great informative video. Merry Christmas to you and your family!
@guzzifabrication3448
@guzzifabrication3448 Жыл бұрын
Thanks ! Merry Christmas to you and family as well !
@AndysDogHouse-h6l
@AndysDogHouse-h6l 9 ай бұрын
Hey Robert. Great video. I have used the grader before and really didn't like it. And that was because I was using it wrong. I waited too long to use it. Now that I know how you use it, I'll buy another one and try it out. Thanks for sharing.👍👍🍁
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
Yeah, brother, there is a time window. If you miss it , the grater can't Be used but if you're in that time window, there is no better way to shape and form body filler as fast and easy. Good luck on your project
@AndysDogHouse-h6l
@AndysDogHouse-h6l 9 ай бұрын
Thanks Robert. See, I didn't know about the time window. And of course, the company that makes/ sells these don't give any information. Thanks again.,
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
👍@@AndysDogHouse-h6l
@brudug713
@brudug713 11 ай бұрын
Been using cheese graters for years. I like the little one usually use the small one hand rasp
@guzzifabrication3448
@guzzifabrication3448 11 ай бұрын
Awesome ! makes a huge difference in working the filler !
@eddyherrera6326
@eddyherrera6326 Жыл бұрын
I love my rasp. I have the small rasp and versatility is great...oh and the flat metal one too!
@guzzifabrication3448
@guzzifabrication3448 Жыл бұрын
Awesome Merry Christmas !
@stevescott6503
@stevescott6503 9 ай бұрын
I used to do a lot of wood work, I used the small rasp for shaping corners all the time, it works great.
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
It saves a ton of time shaping, that's for sure.
@Harold_Callahan
@Harold_Callahan 7 ай бұрын
Great video. I have the small block style grater but I think I'm gonna get some longer ones and use without a holder for more precise control.
@guzzifabrication3448
@guzzifabrication3448 7 ай бұрын
The half round graters work the best, you can find them at an autobody supply store.
@bernardkroeger4045
@bernardkroeger4045 Жыл бұрын
I used these blades for years. But I have found with the easier sanding fillers available now, that they have fallen from the preferred tool status. Also, one has to be careful not to damage or score the filler, therefore making further work. Yes, they have a purpose. But I think it's an individual's choice.😁
@guzzifabrication3448
@guzzifabrication3448 Жыл бұрын
Another tool for the tool box
@michaelvandenhoy1021
@michaelvandenhoy1021 4 ай бұрын
Used to use those rasps. Really don't see them being used much. Dad used to use them probable 30 years ago. Thanks for sharing.
@guzzifabrication3448
@guzzifabrication3448 3 ай бұрын
Really old bodyman trick, I don't see them used much anymore.... Thanks !
@Cheva-Pate
@Cheva-Pate Жыл бұрын
I’m working on a boat from 1959 it’s a Ockebo Moboat and i have a lot of bondowork i will try both yours tips going to be fun A have taking the hull under the waterline from a SeaDoo put in the flat bottom boat so now i have V-shape and waterjet on a very old boat!
@guzzifabrication3448
@guzzifabrication3448 Жыл бұрын
Awesome ! Hope it helps
@SamRalls-ti1be
@SamRalls-ti1be 7 ай бұрын
Been using that method for decades. I guess. I just assumed everyone else figured that out. Great, helpful post for many folks. I let it finish curing before sanding. After the full cure, I use an orbital with a higher grit. Again.....really helpful for many.
@guzzifabrication3448
@guzzifabrication3448 7 ай бұрын
Yes Sir, just passing it on to the new generation 👍
@cwmotorsports4497
@cwmotorsports4497 5 ай бұрын
Man U know your stuff. Thanks for all the tips over the years.
@guzzifabrication3448
@guzzifabrication3448 5 ай бұрын
Just passing on an old time body man trick ! Thanks for supporting the channel !
@Fearsome4some74
@Fearsome4some74 11 ай бұрын
Great channel! Thanks for sharing the tips and reminders 👍
@guzzifabrication3448
@guzzifabrication3448 11 ай бұрын
Thank you Sir !
@vehdynam
@vehdynam 10 ай бұрын
Great tip ! I have tried this before and it really works.
@guzzifabrication3448
@guzzifabrication3448 3 ай бұрын
Yes Sir !! thanks
@mfordyce372
@mfordyce372 9 ай бұрын
You can use hacksaw blades also, works well
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
Thanks for the info !
@outsider7658
@outsider7658 7 күн бұрын
Thank`s for the tips! Great to see. I am with the "old school" and use "lead" and, what we call those: "Panzer Files". Your way makes it much easier for those, using "Bondo" only. I, on the other hand, use only about 1 millimeter or so of the stuff. Just to "even out" the last eventual marks. Like this anyhow. from a Finn in Diaspora
@guzzifabrication3448
@guzzifabrication3448 7 күн бұрын
Awesome ! thanks for the comment I really appreciate it ! I would love to see how other craftsmen work in other countries !!
@thomasbynum8512
@thomasbynum8512 9 ай бұрын
Subscribed, thank you for putting this info out there!!
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
Hey man I really appreciate the sub!!!
@robertcheslock9636
@robertcheslock9636 4 ай бұрын
Started using the "cheese grater" rasp when they first came out. An old model I have has an adjustable bar that can be extended, you cut the grater to whatever length you want to use. They work great to quickly bring the filler down for shaping. Timing its use is important! Your videos are excellent, you have the skill and talent needed to do great work!
@guzzifabrication3448
@guzzifabrication3448 3 ай бұрын
Yeah it's a pretty old body man trick, just showing the new guys and gals, I haven't seen the one your describing that would be interesting to see. Are they still available ? I have an old Vixen file that is adjustable that I use for lead work. Thanks for the comment !
@ericschulze5641
@ericschulze5641 Ай бұрын
Pretty sure they first came out in the 1950s
@guzzifabrication3448
@guzzifabrication3448 Ай бұрын
@@ericschulze5641 The vixen file ?
@ericschulze5641
@ericschulze5641 Ай бұрын
? The cheese grater they had been around a long time when I went to trade school/auto body in the late 1970s, probably came out shortly after plastic body filler came into use
@guzzifabrication3448
@guzzifabrication3448 Ай бұрын
@@ericschulze5641 Got it !
@DanielHadamik
@DanielHadamik 8 ай бұрын
I have used thinner on a rag, to dry the suface of the vondo so the sandpaper doesn't clog. Works well.
@guzzifabrication3448
@guzzifabrication3448 8 ай бұрын
Hey thanks for the info !
@Bozemanjustin
@Bozemanjustin 11 ай бұрын
6:01 out of curiosity, why not just thin out your bondo with some fiberglass resin, now it goes on super thin and is easy to sand
@craigiefconcert6493
@craigiefconcert6493 Жыл бұрын
Great video. Thanks!!!
@guzzifabrication3448
@guzzifabrication3448 Жыл бұрын
Thank you Sir ! I hope it helps in your bodyworking
@stevesmith-ny8jb
@stevesmith-ny8jb Жыл бұрын
Excellent info & delivery. Where were you 27 years ago!? Thank you for sharing.
@guzzifabrication3448
@guzzifabrication3448 Жыл бұрын
Thank you Sir ! I hope you can use it now, hey have a great new year !
@Bozemanjustin
@Bozemanjustin 11 ай бұрын
3:28 when I moved into my first apartment I had never painted a house before, I had painted cars. I literally was using a rasp on the walls to try and get them smooth, treating it like it was a car. My landlord finally saw it and laughed and said you've only painted cars, haven't you... He dunked the roller in the paint and ran it up a section of the wall. I hadn't used the rasp on yet... And you couldn't see anything. You couldn't see any of the crap I was trying to remove
@ChristerJohansson-ic5be
@ChristerJohansson-ic5be Жыл бұрын
Tanks a nice video and happy new years to you
@guzzifabrication3448
@guzzifabrication3448 Жыл бұрын
Thank you Sir ! Best wishes to you and family in the new year !
@maxenielsen
@maxenielsen 10 ай бұрын
Thank you for sharing the benefit of your experience!!
@guzzifabrication3448
@guzzifabrication3448 10 ай бұрын
Just passing on old time tricks, thanks !
@patrickmurray7990
@patrickmurray7990 Ай бұрын
I use the graters when I am constructing Plugs to make fiberglass molds. Doing body work I always try to stick to the old rule of not building more than 1/16 of an inch thick or less. If you need more, you didn't complete the metal work! I'm now retired from the restoration industry and have completed projects that still are receiving awards. Keep up the great videos.
@guzzifabrication3448
@guzzifabrication3448 Ай бұрын
Thank you Sir ! you are correct do your metalwork, and the job will last ! Thanks for the comment !
@LilDirt12
@LilDirt12 4 ай бұрын
I call them cheese graters. And you can buy additional graters and switch them out. Thanks man. I like your vids. Thank you for not being condescending. It's huge in my book. 👍🤘
@guzzifabrication3448
@guzzifabrication3448 4 ай бұрын
@LilDirt12 Thanks brother !
@LilDirt12
@LilDirt12 4 ай бұрын
@@guzzifabrication3448 sister. Lol. But no offense taken. I'm called dude by my boyfriend and friends. 🤭
@lohikarhu734
@lohikarhu734 11 ай бұрын
I must*thank you sincerely* For not calling this *"a hack"* Trick, technique, even better!
@guzzifabrication3448
@guzzifabrication3448 11 ай бұрын
Thanks, I really dislike the word " hack "
@pennysavercashroyjohnson7675
@pennysavercashroyjohnson7675 11 ай бұрын
The longer flat ( cg) I'd take off the holder, they are best for larger radius outside curves, VW bug per say, and if you take a cut off wheel to the half round, in the shape of a point V, it's easy to get in hard to reach places, like corners.
@guzzifabrication3448
@guzzifabrication3448 11 ай бұрын
Hey thanks for the input happy new year
@RicardoGonzalez-c9s
@RicardoGonzalez-c9s 9 ай бұрын
Thanks for the heads up Great
@guzzifabrication3448
@guzzifabrication3448 3 ай бұрын
Passing on an oldtime bodyman trick, Thanks !!
@robertgroves6186
@robertgroves6186 10 ай бұрын
So far I have not used any body filler, not at that stage on my project. When I do I'll be so glad I learned from this video!!. Your videos are great! When MIG welding longer joins, like replacing the bottom 6" of an out door skin do you use the same tenique as in the smaller patches? Appreciate your lessons! Thanks.
@guzzifabrication3448
@guzzifabrication3448 3 ай бұрын
Yes Sir same technique, with larger repair areas just keep heat build up in mind.... the body filler trick is a really old body man tip. Sorry I missed this comment somehow. Thanks
@christiantroy7722
@christiantroy7722 7 ай бұрын
I've been doing that for years it's great for getting the rough shape but stay away from the edges it will just take it all off 👍👍👍
@guzzifabrication3448
@guzzifabrication3448 7 ай бұрын
👍
@Bogieman18
@Bogieman18 Жыл бұрын
Good job
@guzzifabrication3448
@guzzifabrication3448 Жыл бұрын
Thank you Sir ! Merry Christmas
@oldbiker9739
@oldbiker9739 10 ай бұрын
lake side autobody uses this method as well ,I'm no body man but this method saves many hours of sanding , I could probably use 40 grit instead of 80 grit as well to speed up the process thanks for the tips ,my 91 GMC turned out well using this method .
@guzzifabrication3448
@guzzifabrication3448 10 ай бұрын
Huge time and material saver.... just trying to pass on what somebody showed me a long time ago. Appreciate the comment
@earniederboven5100
@earniederboven5100 7 ай бұрын
Cheese graters /rasps are great tools..
@guzzifabrication3448
@guzzifabrication3448 7 ай бұрын
Yes they are!
@pauldegano5724
@pauldegano5724 Жыл бұрын
Okay so when your doing the next steps do you add more filler ? As it looks there are light scratches in the bondo from the rasp
@guzzifabrication3448
@guzzifabrication3448 Жыл бұрын
Great question, that was a rushed demo, usually with a little more time you should have that issue , however most repairs will require 2 mixes, if it needs a second mix, recoat. Happy New Year !
@anthonytrodriguez7166
@anthonytrodriguez7166 8 ай бұрын
Very nicely explained
@guzzifabrication3448
@guzzifabrication3448 8 ай бұрын
Thanks !!!
@scottcrowley2061
@scottcrowley2061 2 ай бұрын
Good, solid tips. Nice.
@guzzifabrication3448
@guzzifabrication3448 2 ай бұрын
Passing on old time body man trick. Thanks !
@guzzifabrication3448
@guzzifabrication3448 Жыл бұрын
Thanks
@williamhenson1771
@williamhenson1771 8 ай бұрын
Will it work on bonds glass?
@williamhenson1771
@williamhenson1771 8 ай бұрын
Stupid auto correct ***bondo glass***
@guzzifabrication3448
@guzzifabrication3448 8 ай бұрын
@@williamhenson1771No doesn't work well with reinforced fillers.
@ImpalaLans
@ImpalaLans Жыл бұрын
What would you say the correct timing is at 75 degrees F? Maybe 10 minutes?
@guzzifabrication3448
@guzzifabrication3448 Жыл бұрын
I'll try to make a video over mixing cure times soon. Merry Christmas
@redcarone1341
@redcarone1341 10 ай бұрын
WOW lincoln electric powermigs. how do they take care of you. do you still have them.
@guzzifabrication3448
@guzzifabrication3448 10 ай бұрын
I ❤ ! transform machines will last lifetime...
@redcarone1341
@redcarone1341 10 ай бұрын
@@guzzifabrication3448 WONDERFUL! you sir have good day nice work keep them videos comming.
@numbskullskills
@numbskullskills Жыл бұрын
it that the tinned out filler. havent mixed any yet to see how it sands
@guzzifabrication3448
@guzzifabrication3448 Жыл бұрын
More than 20% added resin and the mixs gets a little harder to sand but either way this method works on both. Merry Christmas
@numbskullskills
@numbskullskills Жыл бұрын
cool thanks Merry Christmas too you too.@@guzzifabrication3448
@heyxilong
@heyxilong Жыл бұрын
I used a hacksaw blade to knock of most of the top layer and even off the body before putting on a second layer if needed. Once you knock off the shiny layer it's easier to sand.
@guzzifabrication3448
@guzzifabrication3448 Жыл бұрын
Haven't tried that one.
@heyxilong
@heyxilong Жыл бұрын
@guzzifabrication3448 it feathers the bonds edges better and it has a finer finish. Less gouges.
@guzzifabrication3448
@guzzifabrication3448 Жыл бұрын
@@heyxilongI'll try that
@bravo2002fatboy
@bravo2002fatboy Ай бұрын
I was about 16 in 1970 learning body work from an older hippie he told me it was called the “wet dream method “thanks for making the video
@guzzifabrication3448
@guzzifabrication3448 Ай бұрын
Oookkk... Glad it brought back a good memory. Thanks for the comment !
@My-Nickel
@My-Nickel 6 ай бұрын
Thank you sir 🙏
@guzzifabrication3448
@guzzifabrication3448 6 ай бұрын
Thank you !
@lohikarhu734
@lohikarhu734 11 ай бұрын
I've used those rasps on wood, for a long time, for forming shapes, mostly...
@guzzifabrication3448
@guzzifabrication3448 11 ай бұрын
Awesome Thanks for the comment !
@theslowride66
@theslowride66 Жыл бұрын
Back on the old days (1980's) we dint even know the cheese grater had a holder or tool. I stumbled upon if you clog your grater with bondo you can soak it in water & it will clean up easy . I had a mixing board made out of counter top left over ( cabinmate shop neat by) I would clean off the left over with a razor blade , The plastic applicators clean up better if you peel it off after its cured. If going for a flat skim coat use a metal putty knife.
@guzzifabrication3448
@guzzifabrication3448 Жыл бұрын
yeah I never use a cheese, wow I never heard the water trick, I'll give that a try. Merry Christmas !
@luckyvids
@luckyvids 10 ай бұрын
My best option for a mixing board was a toyota rear door's glass and whenever it got dirty with some leftover hard bondo it was very easy to clean it with the grinder. I miss the good old days, man!
@guzzifabrication3448
@guzzifabrication3448 10 ай бұрын
@@luckyvids Thanks for the comment
@P.Trim69
@P.Trim69 11 ай бұрын
You your work best for me. That's y ur coming here remember.
@guzzifabrication3448
@guzzifabrication3448 10 ай бұрын
🙂
@garyhoward4064
@garyhoward4064 3 ай бұрын
What is the approximate time to wait before starting the cheese scratching
@guzzifabrication3448
@guzzifabrication3448 3 ай бұрын
That's tricky... if the filler is too soft you will know fast and if it's too hard you will know faster.... mix and spread get some practice and the filler will tell you what to do. Thanks
@LittleCobra-eu9cx
@LittleCobra-eu9cx Ай бұрын
Ty for your info
@guzzifabrication3448
@guzzifabrication3448 Ай бұрын
@@LittleCobra-eu9cx thank you I'm just passing on an old-time body man trick, now it's yours thanks for watching !
@alicenaillis7382
@alicenaillis7382 11 ай бұрын
Thanks for the trick💥
@guzzifabrication3448
@guzzifabrication3448 10 ай бұрын
Thanks for the comment !
@cfell
@cfell 11 ай бұрын
Hacksaw blade woks sometimes.. span long sweeps once applied… cut slit in a board and glue in place, one smooth and other teeth out… then the rasps too… trick is hitting “the window”… temp of surface
@guzzifabrication3448
@guzzifabrication3448 11 ай бұрын
Yes Sir, definitely have to be on top of the filler and hit it at the fight time, I've never tried the hacksaw trick, I;ll have to try that one out. Happy New Year.
@malcolmdyer6090
@malcolmdyer6090 Жыл бұрын
I've always known those files as 'Surform' by Stanley and they are a wood working file, not metal or Bondo file.
@guzzifabrication3448
@guzzifabrication3448 Жыл бұрын
?? they are awesome for working filler....
@luckyvids
@luckyvids 10 ай бұрын
I was a body man in an auto body shop in the 70s and we used cheese graters then. Many body men didn't knew about the use of the cheese graters but it did made a hell of a difference to finish the sanding in half the time.
@Richie5480
@Richie5480 Жыл бұрын
I’ve always used cheese graters , just before the bondo starts drying.
@guzzifabrication3448
@guzzifabrication3448 Жыл бұрын
Nice ! Merry Christmas
@boonieg2460
@boonieg2460 Жыл бұрын
👍
@guzzifabrication3448
@guzzifabrication3448 Жыл бұрын
Thanks Merry Christmas
@gm-lb9oe
@gm-lb9oe Жыл бұрын
I also get a kick out of people who say ,DONT USE THE "BONDO" BRAND BECAUSE ITS JUST CRAP. GUESS WHAT EVERYONE............................................................... .THE BONDO BRAND IS ACTUALLY MADE BY 3M. Its still a 3m product.
@guzzifabrication3448
@guzzifabrication3448 Жыл бұрын
THANK YOU !!!! most of the negative comments come from people with little to NO experience...... AKA keyboard jockeys, never been in the trenches...... Have a great new year and thanks for the comment !
@choimdachoim9491
@choimdachoim9491 5 ай бұрын
Drywall section at da Big Box places. Make life so easy building a house.
@guzzifabrication3448
@guzzifabrication3448 5 ай бұрын
As long as your arm doesn't get tired...
@jump4j
@jump4j 8 ай бұрын
man I haven't used a cheese file since doing rust jobs in the 80's
@guzzifabrication3448
@guzzifabrication3448 8 ай бұрын
👍
@sherwinstaudt1881
@sherwinstaudt1881 11 ай бұрын
When those rasp hit the market years ago they were intended for wood, you can waste a lot of body filler material with those rasp.
@guzzifabrication3448
@guzzifabrication3448 11 ай бұрын
Yes, you can shape and contour filler really quickly . Thanks for the comment !
@sungear
@sungear Жыл бұрын
Feedback: voice over is awesome. This video would have sucked if you were narrating while doing the work.
@guzzifabrication3448
@guzzifabrication3448 Жыл бұрын
Thanks !
@aaronwalker8798
@aaronwalker8798 4 ай бұрын
The filler is your problem. Try gold. Sand it with a file with 36 to shape right before it gets fully hard, just as soon as it doesn't gum the paper. The durablock you had was the best. You were just using it wrong. You have to keep switching directions. Also, you won't have to press hard if you use gold. You will kick yourself if you ever try it. Last fact, a cheese grater is for someone that didn't do their metal work. A hammer and dolly shapes and saves money on materials and produces a better quality job.
@guzzifabrication3448
@guzzifabrication3448 3 ай бұрын
I just you haven't seen my metal finish only or lead working videos.... Your missing the point of the video.... this is for beginners....
@alisterromain8425
@alisterromain8425 7 ай бұрын
Thank you! I did a whole lot of nonsense. I'm feeling discouraged to redo. Do this, I spend a lot of time on my back or butt - really, really hard. No power tools.
@guzzifabrication3448
@guzzifabrication3448 7 ай бұрын
I'm not sure I follow What you're saying thanks for the comment friend
@Stevesbe
@Stevesbe Жыл бұрын
WWBBD what would Bondo Billy do?
@guzzifabrication3448
@guzzifabrication3448 10 ай бұрын
🤔
@AaronBilger
@AaronBilger Жыл бұрын
hardest part for me is getting it just right so I won't see the imperfect surface after using body filler.
@guzzifabrication3448
@guzzifabrication3448 Жыл бұрын
Prime, block sand, reprime, block
@TrillKump
@TrillKump Жыл бұрын
I never thought these were any type of secret. I called them a 'Sureform'.
@guzzifabrication3448
@guzzifabrication3448 Жыл бұрын
Not everyone know as much as you do.......
@P.Trim69
@P.Trim69 11 ай бұрын
All one more thing cheese grater. Will make pizza dough and cheese graters. Filler up with all the toppings .
@guzzifabrication3448
@guzzifabrication3448 10 ай бұрын
👍
@DocPhil1956
@DocPhil1956 Жыл бұрын
So why not a time frame 15 30 60 minutes to curing??
@guzzifabrication3448
@guzzifabrication3448 Жыл бұрын
Mixing body filler and hardener has so many variables it doesn't work that way.....That's a good video idea. Merry Christmas
@DocPhil1956
@DocPhil1956 Жыл бұрын
@@guzzifabrication3448 seen enough fabrications . I appreciate the insight but I look for tricks of the trade . It looks like the bondo and hardener were your professional mix . You put so much emphasis on timing to get it right .
@FE428Power
@FE428Power Жыл бұрын
​@@guzzifabrication3448great point. Now do a video explaining these variables and how to achieve the window in which to use these tools.
@guzzifabrication3448
@guzzifabrication3448 Жыл бұрын
@@FE428Power Thanks for watching !
@jefferypowell9885
@jefferypowell9885 11 ай бұрын
Usegraders when filler is half hard
@guzzifabrication3448
@guzzifabrication3448 10 ай бұрын
👍
@bobdown9414
@bobdown9414 9 ай бұрын
Nothing new about cheese graters been around for years. Used them when i did my trade in the 60ties.
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
But there is more people that don't know than do.... this video is for them.
@robertmcmahon2744
@robertmcmahon2744 2 ай бұрын
Why doesn't your channel have a "Thanks$$" botton where people can leave a $$ gift to say thanks for the education they get from your videos?? Other channels i watch do. I often leave $2 per video to the channel provider to aid in future production of videos.
@guzzifabrication3448
@guzzifabrication3448 2 ай бұрын
I have a ko-fi.com/guzzifabrication set up on the home page, I will add to each video, great idea , Thanks for supporting the channel !!
@P.Trim69
@P.Trim69 11 ай бұрын
Ok BRING SOME Bondough will make something to eat to.
@guzzifabrication3448
@guzzifabrication3448 11 ай бұрын
On my way
@P.Trim69
@P.Trim69 11 ай бұрын
@@guzzifabrication3448 be out front weightin
@Stevesbe
@Stevesbe Жыл бұрын
I actually use cheese graters
@guzzifabrication3448
@guzzifabrication3448 Жыл бұрын
Nice, have a great new year
@gerardgerman9995
@gerardgerman9995 5 ай бұрын
Do that way all the time
@guzzifabrication3448
@guzzifabrication3448 5 ай бұрын
@@gerardgerman9995 Awesome !
@markmeador
@markmeador 9 ай бұрын
Leave the kid alone, not everybody can be old and know stuff.
@OldBondoBilly
@OldBondoBilly 11 ай бұрын
Bondo on cardboard! It’ll suck out all the benzo-blah-blah🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣
@guzzifabrication3448
@guzzifabrication3448 11 ай бұрын
🤔
@P.Trim69
@P.Trim69 11 ай бұрын
You been here before yeah it's rough n here. Heck it's rough out there laying on ground watch the glass it's broken. That's the garage where it's going be.
@guzzifabrication3448
@guzzifabrication3448 2 ай бұрын
Ok...
@jimporter441
@jimporter441 11 ай бұрын
there is no way a team that played as well as cleveland did, falls apart like this unless they were told to.
@guzzifabrication3448
@guzzifabrication3448 11 ай бұрын
That's a good reason not to gamble....
@LTVoyager
@LTVoyager Жыл бұрын
This isn’t a trick I didn’t know. I learned this back in the 70s.
@guzzifabrication3448
@guzzifabrication3448 Жыл бұрын
Well.... why didn't you tell everybody else?..... now I have to show them....
@LTVoyager
@LTVoyager Жыл бұрын
@@guzzifabrication3448 I assumed everyone already knew. 😁
@AdamOutlaw87
@AdamOutlaw87 6 күн бұрын
Or you can buy better bondo instead of bondo at autozone and you wont have to buy resin and stir bondo like paint for minimal results. 1 other way is to get you some creamy spot putty like dophin by UPOL and mix a tad of that with your bondo per mix instead of fixing up a whole can of bondo and the result is 100% the same your getting here with cheap bondo that your buying expensive resin to do this. Its a cool tip but costly in the long run, but its your money and i wont tell u how to spend it
@guzzifabrication3448
@guzzifabrication3448 6 күн бұрын
Thanks for the comment, it's about the big picture not the video...
@P.Trim69
@P.Trim69 11 ай бұрын
If get on it it's breaking. Christmas wait.
@guzzifabrication3448
@guzzifabrication3448 3 ай бұрын
Your broke for Christmas???
@P.Trim69
@P.Trim69 2 ай бұрын
Shoot been broke Halloween, Thanksgiving, Christmas, 2024 cost to much.
@guzzifabrication3448
@guzzifabrication3448 2 ай бұрын
@@P.Trim69 Santa is going to be in the soup line this Christmas 🎄......
@P.Trim69
@P.Trim69 2 ай бұрын
U know that's right 😂. Soup anyone. Yeah I'll take a bowl 🥣 🍜 please. Thank you 🙏🏻.
@saylaveenadmearedead
@saylaveenadmearedead Ай бұрын
No, it's called a sure form.
@guzzifabrication3448
@guzzifabrication3448 Ай бұрын
What's called sure foam??
@user-to9ho7yx4r
@user-to9ho7yx4r 11 ай бұрын
Lead file
@guzzifabrication3448
@guzzifabrication3448 11 ай бұрын
A lead file doesn't have holes for the cut material to escape through like a rasp it'll clog up fast
How to fix a rust hole - NO body filler !  - D.I.Y. Auto Restoration
13:38
Guzzi Fabrication - D.I.Y Auto Restoration
Рет қаралды 115 М.
Rusted out window channel ? NO Problem !   How to fix it  FAST n EASY !     D.I.Y. Auto Restoration
15:57
Guzzi Fabrication - D.I.Y Auto Restoration
Рет қаралды 36 М.
How to treat Acne💉
00:31
ISSEI / いっせい
Рет қаралды 108 МЛН
Правильный подход к детям
00:18
Beatrise
Рет қаралды 11 МЛН
Restoring Polycarbonate Lenses
12:48
Hillbilly RV Repair
Рет қаралды 1,1 М.
BODY FILLER /BONDO TIPS and TECHNIQUES for PRO results!
23:16
Garage Noise
Рет қаралды 250 М.
Replacing trunk, floors or quarters ?  STOP ! drilling out spot welds I have a FASTER - BETTER WAY !
15:44
Guzzi Fabrication - D.I.Y Auto Restoration
Рет қаралды 265 М.
The  Bondo trick you don't know...  Faster, Easier, Improved Quality !     DIY Auto Restoration
8:31
Guzzi Fabrication - D.I.Y Auto Restoration
Рет қаралды 1,2 МЛН
Penetrating Oil Showdown Episode 2. Will Seafoam Deep Creep prevail?
10:58
How to weld: auto body panels & sheetmetal - tips and tricks -  D.I.Y Auto Restoration
10:08
Guzzi Fabrication - D.I.Y Auto Restoration
Рет қаралды 107 М.
The BEST Guide to DIY Home Automotive Rust Repair!
33:21
Paint Society
Рет қаралды 306 М.
How to Use Body Filler - DIY Tips From A Show Car Builder
13:34
Speedway Motors
Рет қаралды 149 М.
5 WAYS TO RUST PROOF Without Paint!!!  CHEAP, FAST & LONG LASTING
11:18
Cafe Racer Garage
Рет қаралды 2,9 МЛН
How to treat Acne💉
00:31
ISSEI / いっせい
Рет қаралды 108 МЛН