GXservo Metal Brushless servo X25 tested

[@russcole5685]

I just brought their smaller micro size. 23g 8kg spec. At 6V 5kg and 0.6/60°. Fast and strong for the size. But it did not give me 180° travel. I had to buy a programming USB unit. 13NZD. They are set at shop for min 500us mid 1500us and max 2500us. To get 180° with standard radio gear it needs to be set to 1000, 1500, 2000. Some radios swing between 800 and 2200. I contacted them direct though their store on AliExpress and they where very helpfull. Gave link to needed USB, and refunded the price of the USB after arrival for my troubles.

[@WTFRCCars]

Good to know :)

[@russcole5685]

@@WTFRCCars hope it was helpful knowledge. And happy New year's from New Zealand

[@gboulter]

I wish you had confirmed function on other brands of programmer. Also can you slow your shutter that will stop all the led displays flashing.

[@WTFRCCars]

Yeh I normally have the shutter speed match the LEDs but I had just done a firmware update on my black magic 6k pro and it reset the settings lol, now I have a bunch of programmers I should get time to test and see if any of them work

[@MYRCHOBBY]

Hello. I bought 3 of these for my excavator. They are making a soft humming/buzzing sound .not super loud but you can hear it if you’re really close. Is that normal? Thanks

[@WTFRCCars]

No thats normally when you have a load on them or if something is stuck causing resistance to them centering

[@MYRCHOBBY]

@@WTFRCCarsI centered them before installing. Will that affect the life span of the servo? I’m kinda new to this. Thanks for responding.

[@WTFRCCars]

@MYRCHOBBY just check them after a few min so long as they are not getting hot then they will be perfectly fine :)

[@JohnPopeye]

What car you used the servo on?

[@WTFRCCars]

Running it in a kamtec and it works fantastic still

[@JohnPopeye]

@@WTFRCCars amazing!

[@benyoung4763]

They are made under many names. Yipin omg srt

[@WTFRCCars]

Yeh same with AGFRC they make lots of the servos for many other brands

[@benyoung4763]

Great servo I have a bunch of the x25 in me and my sons 1/10 racing buggy and truggys. Even run on for the throttle and brake on my brand new HB World Series 1/8 buggy.