GY6 Plug & Play fuel injection kit

  Рет қаралды 47,735

Rolling Wrench

Rolling Wrench

Күн бұрын

Пікірлер: 223
@MrDorby
@MrDorby 5 жыл бұрын
Great video! Thanks for your contribution to the ruckus tuner community! Looking forward to utilizing this system.
@RollingWrench
@RollingWrench 5 жыл бұрын
Thank you dude!!! I need that 14” mount and a set of wheel!!!! It’s on my bucket list :-)
@vicaldanafrancosr.1563
@vicaldanafrancosr.1563 Ай бұрын
Do you have any efi systems for a 260cc gy6
@phlodel
@phlodel Жыл бұрын
I you've got CO2 or argon or 75/25 shielding gas, you can purge the gas tank with it and it won't explode. I have welded fuel tanks with fuel in them (not recommended) . I like to keep a constant flow into the tank to make sure it's purged. These gasses are heavier than air, so let the gas flow at a slow rate. out at the highest point. a little flow is enough.
@thesammagezone
@thesammagezone 3 жыл бұрын
I so want this for my maddog. Idk how many times I watched the vid relised your hooking it up to a ruckus lol 😆. I use to work on 50s bought a 150 hate the carb issues I'm haven. What all do I need to get that to work on my bike? Hopefully not mess it up when tryen to install it
@user-neo71665
@user-neo71665 5 жыл бұрын
The community needs a good EFI kit but dear damn I didn't pay that much for the EFI kit for the LS swap in my nova. For $400 I just can't justify keeping the gy6 vs throwing a bigger engine off a wrecked streetbike on my buggy that has factory fuel injection. I want to support this but the cost is gonna have to come way down. A better way to displace the gas fumes in a fuel tank is to hook a hose to an exhaust pipe and run it in the tank. Let whatever engine run for 15-20 minutes and the tank is filled with inert gas. You also aint having to try to rust out your tank filling it with water.
@RollingWrench
@RollingWrench 5 жыл бұрын
The one for your nova probably didn’t come tuned. That means you need to take it to a tuner to have it tuned. Not this kit. Only fine tuning. By the way this kit has the ability to run in a v8 (maybe some day) if you want a kit like in your Nova we have that DIY kit, it’s a bit cheaper. Unfortunately this stuff is soo expensive and takes a lot of time and effort to get right. A price drop is going to be difficult. It’s not for everyone :-(. Thanks for the input and support 🙏
@RollingWrench
@RollingWrench 5 жыл бұрын
Thanks for the tip on the gas fumes. I’ll have to try that out :-)
@majoraslayer64
@majoraslayer64 5 жыл бұрын
I'm more interested in putting one on the "shitbox" lol. I have a 1991 Suzuki King Quad 300 4x4 I'd like to convert to EFI.
@Zachry86
@Zachry86 4 жыл бұрын
Exact same here. The king quad carb is trash
@lcwilkerson2824
@lcwilkerson2824 2 жыл бұрын
I got a Bayou 220 and looking for a efi kit did you end up figuring anything out?
@SergioTerol
@SergioTerol 5 жыл бұрын
Quick question! I just did a trip on my 150cc suzuki. I did try, and experimented different shifting parameters, like... rpm (which i had no indicator, just by heart), maybe top acceleration for each gear, etc... I managed to get 60mph, and even when going downhill... it hardly even went farther. Now... 150cc scooters with gy6 engines are kind of cheap to buy in Mexico. Realistically; would a GY6 would endure a full blast 200km trip? And if so, what mods would you recommend from your shop for the best top speed, less power loss uphill... like... what would be the most reliable and balanced combination of mods for traveling and expected top speed with stock 150cc cylinder on flat roads?
@Krotos1970
@Krotos1970 Жыл бұрын
When are you making more of these plug n play kits?
@alllivesmatter5750
@alllivesmatter5750 7 ай бұрын
Hello, regarding the ECU can you explain what make and model of diagnostic scanner is needed to read the codes.
@roywalls5595
@roywalls5595 5 жыл бұрын
I want know upgrade 50cc engine to 80cc or 100cc cost will be?
@edsonriveraherrera225
@edsonriveraherrera225 4 жыл бұрын
hello I hope you are well just to tell you that I have tried to acquire the electronic injection system for my 150cc scooter gy6 carbureted engine but it appears to me as exhausted. I would like to know when it will be available?
@rdonohue4497
@rdonohue4497 3 жыл бұрын
I picked up a 2020 like 50 fuel injected can you tell me what I need to buy and install to get this scooter moving faster it seems really slower compared to other 50cc scooters I've owned and it's really slow compared to my genuine roughhouse. I like it it just needs a power boost to say the least.Help me help..
@ohpopozuda
@ohpopozuda 5 жыл бұрын
I know some people swear by carbs, but I’m glad you put time into this. Great job. Are there any plans for replacement parts once you buy it (i.e. fuel injector) if needed? Or can they be replaced with parts from other stores. Fuel injector cleaner should suffice to clean this right (the simple questions)?
@RollingWrench
@RollingWrench 5 жыл бұрын
Thank you 🙏. All replacement parts can be purchased from us.
@tylane6192
@tylane6192 3 жыл бұрын
instablaster...
@minibikeaction4266
@minibikeaction4266 5 жыл бұрын
Thats a clean well engineered and thought out kit, your a serous dude!
@RollingWrench
@RollingWrench 5 жыл бұрын
Thanks man🙏 a lot of hard work for sure :-)
@phlodel
@phlodel Жыл бұрын
I know this has been 4 years but i wonder if this can be adapted to a Kymco K-Pipe motorcycle?
@quietclarence7998
@quietclarence7998 5 жыл бұрын
I have a gy6 150cc coolster atv and would love to install this efi kit on. What is cost of rolling ranch kit?
@mazenkassar4554
@mazenkassar4554 2 жыл бұрын
What about gasoline consumption per liter before and after ?
@zfloz9895
@zfloz9895 4 жыл бұрын
Hello ! There is any injection kit ,for the Runner 180 cc 2 stroke?
@carlkennedy2499
@carlkennedy2499 Жыл бұрын
Hi. I have a mgb fantasy 125cc scooter gy6 engine I am not getting any fuel its a efi model I have bought a new wire harness new stator pick up full ignition system new regulator new piston etc new injector why won't I be getting fuel to tye engine fuel is getting to the injector but its not letting it out the engine it has me puzzled spent 4 weeks on it and still not running. Any help would be great paid full year insurance taxed etc and now it's off tye road 😢
@danieldarden3384
@danieldarden3384 5 жыл бұрын
make a video on how to supercharge ur gy6
@uninhabitablelakes_byruthl4240
@uninhabitablelakes_byruthl4240 3 ай бұрын
I have a gy6 Chinese engine 150cc I am trying to fuel inject my engine. Do you have a plug and play for only gy6 or can this plug and play set up will work as well.
@isaacsmith823
@isaacsmith823 5 жыл бұрын
You still working on this? And if so how much longer are you thinking? Building 232cc oil and water cooled taida B-case motor . fitting it into an ice bear mad dog. They don't have a fuel pump just the vaccum from carb.. So would this application still work? Can I just hardwire the plug from the fuel pump to power? Or does it communicate with the moped? Sorry for so many questions. Just curious if it would work for me and if so when are you thinking it will be ready?
@teh0theif
@teh0theif 3 жыл бұрын
Are you going to offer a kit like this again? Or one for a 50cc gy6?
@violetstill11
@violetstill11 2 жыл бұрын
Literally asked the same question on their social media. Still no response, it’s been 4 years and I believe they’ve given up on it unfortunately
@0643wes
@0643wes Жыл бұрын
So no tuning carbs after upgrades
@jasonhowell9589
@jasonhowell9589 4 жыл бұрын
Okay I understand the kits for a GY6 you think I could get or retrofit this kit to a Lifan engine
@scottlowran1404
@scottlowran1404 Жыл бұрын
Can you put this on a Tao Tao 50CC with a 100 CC upgrade
@phillipnorman9497
@phillipnorman9497 2 жыл бұрын
I’ve got a Tao Tao 200 bull you got anything for that fuel injection plug in play ???
@alejandroolaso1267
@alejandroolaso1267 2 жыл бұрын
How can i get this efi kit? I want to convert my gy6 carburetor to efi. How much does it cost the plud n play typem
@Drayman1011
@Drayman1011 2 жыл бұрын
Is there anything like this that will work for the gy6 250cc engine?
@sheeplereaper7247
@sheeplereaper7247 3 жыл бұрын
When will you have more available?
@vicenterios9264
@vicenterios9264 10 ай бұрын
Are you ever going to come out with the new kit.
@RollingWrench
@RollingWrench 10 ай бұрын
Spring
@willyalcantaragamad8877
@willyalcantaragamad8877 3 жыл бұрын
Good morning.. Can i ask? How much of the EFI kit sir? Where can i buy them?
@misunderstood9483
@misunderstood9483 3 жыл бұрын
When will u be getting more efi kit??
@emrecanates6941
@emrecanates6941 3 жыл бұрын
hello, i have a question for you. I own a gy6 efi 50cc scooter. I upgraded to 80cc but it misfires and stalls. How can I increase the fuel mixture?
@dadlifegarage2292
@dadlifegarage2292 3 жыл бұрын
When will you have more in stock? Can I run it on a stock 150cc GY6?
@motocache6645
@motocache6645 2 жыл бұрын
Looks like he has a harness option compatible with the standard GY6 harness BUT as of this moment he still is modifying the harness and isn't selling them atm.
@johnnyfriesen1364
@johnnyfriesen1364 4 жыл бұрын
Amazing videos... I’ll def be purchasing the 20 min harness and the EFI plug and play when I do my build....
@RollingWrench
@RollingWrench 4 жыл бұрын
Sweeet! I appreciate you !
@reynanteescueta3162
@reynanteescueta3162 2 жыл бұрын
Can I install your plug and play efi to my 125 cc scooter?
@aprilhonrada3040
@aprilhonrada3040 3 жыл бұрын
Can i use that harness into my motor gy6 racal motors sir?? Please give me some tipon that stuff
@SergeyPRKL
@SergeyPRKL 3 жыл бұрын
how does it run with 125cc Honda clones?
@datnis916
@datnis916 5 жыл бұрын
Man I broke my o2 sensor what's your wiring diagram for a replacement
@wolfdesikan1766
@wolfdesikan1766 3 жыл бұрын
Off topic but do you think your 12 pole stators would go into a zongshen 190 or 212? As of right now our only option is to try and get one from ooracing in England and they won't ship to america so you have to find a British person and hope they won't steal your money.
@thiswillprobhrt
@thiswillprobhrt 2 жыл бұрын
Gy6 screw spacing is wider. Won’t fit ZS
@Feketekutya
@Feketekutya 3 жыл бұрын
Is a kit avaliable for a 400 cc dirt bike with 45mm engine side carb fitting?
@Chrispointofview
@Chrispointofview 5 жыл бұрын
When are you going to make this available?
@RizwanSaeed
@RizwanSaeed 4 жыл бұрын
can we connect this carborater bike and with any motorcycle?
@joshmaxwell274
@joshmaxwell274 3 жыл бұрын
Couldn’t find this on the site, do you still make these?
@leahmadison2320
@leahmadison2320 5 жыл бұрын
Hey brother how r u.. I've been try to start my 2017 Honda clone I had it about a year n now it won't start .. I clean the carburetor like six times n the jets as well lol .. iv bought a new spark plug I change the oil .. I just moved to Fort Meyers FL .. if u can help me in anyway I will greatly appreciate it.. I watch all your videos keep up the good work 👍🏽
@bladerunner198306
@bladerunner198306 4 жыл бұрын
at this point, just buy a new stock carb they are around$40. and swap it. then, stay away from ethanol fuel. find ethanol free fuel stations and stick with it. no gunk.
@flyingalbert
@flyingalbert 5 жыл бұрын
When is Plug and Play kit available on your website? If it will not be available in the near horizon, maybe you can do a tutorial how to use the software for the DIY kit on the GY6 so more people could buy the DIY kit now.
@RollingWrench
@RollingWrench 5 жыл бұрын
The plug and play kit is ready, if you want a kit just email us. $595. We have been selling them. Through email
@flyingalbert
@flyingalbert 5 жыл бұрын
@@RollingWrench Do you have a link I can download the manual on installation and operation on adjustment on the ECU? I want to see if something I can handle install myself or I have to hire someone.
@RollingWrench
@RollingWrench 5 жыл бұрын
flyingalbert on our plug and play system you will not have access inside the software. It’s 💯 plug and play and comes with a base tune. Use the video for the install. If you want to make adjustment to the base tune we supply a hand tuner in the kit. Simple as that, no tech know how, no software issues, SIMPLE :-)
@flyingalbert
@flyingalbert 5 жыл бұрын
@@RollingWrench Which installation video? You have few in YT. Is it the one begin with "Beta tester only""?
@RollingWrench
@RollingWrench 5 жыл бұрын
flyingalbert its this video actually
@smimatt1983
@smimatt1983 3 жыл бұрын
Do you make EFI setups for gy6s on buggies like the tomberlin crossfire
@PhilipHutton
@PhilipHutton 2 жыл бұрын
Will this work with a 2 stroke motor for a yamaha bws?
3 жыл бұрын
Efi kit. Page not found???
@RollingWrench
@RollingWrench 3 жыл бұрын
We stopped selling them. We have a new and improved kit in the works. With auto tune
@markkivenmartinez1938
@markkivenmartinez1938 3 жыл бұрын
Is this already available? How much?
@iulianciocan5672
@iulianciocan5672 4 жыл бұрын
Hey rolling wench :) watched some of your videos ... i got 1 question do ... i recently bought a Motowell Darox scoot (made in hungary) 49cc 4 stroke EFI scooter , led's and digital dash .. front and rear disk breaks .. its a beauty ... but .. if i want to make it to 80cc ... will the efi system need tuning ?? if i disrestrict it .. it will go about 75 km/h ( it has 2.8 kw power) , thats why i wanna buy a malossi 80cc aluminium engine kitt ... giveme some advice pls :) thx
@geraldroland5079
@geraldroland5079 4 жыл бұрын
Yo Mat. How big of a gy6 engine will the plug and play kit work on. I have a Trailmaster Turino 150cc Chinese scooter. I want to build either a 232cc or a 190cc engine.
@RollingWrench
@RollingWrench 4 жыл бұрын
125cc-232cc
@naiemmullah4874
@naiemmullah4874 3 жыл бұрын
can it be use to scomadi TT125?
@bigpoppa_985
@bigpoppa_985 3 жыл бұрын
I have a Polaris Hawkeye 300 which kit will work for it? Iam a tuner so that's not a problem.
@RollingWrench
@RollingWrench 3 жыл бұрын
No :-(
@daveb11230
@daveb11230 5 жыл бұрын
You never mentioned why. I have that harness with the ice cube relay and it runs fine. Just curious why you said stay clear.
@RollingWrench
@RollingWrench 5 жыл бұрын
They are very very problematic.
@daveb11230
@daveb11230 5 жыл бұрын
Rolling Wrench Thanks for the reply but in what way? I’m fairly new to this stuff and trying to learn as I go. Not much of a scoot scene in NJ where I am so videos like yours are what I use to figure most of this out.
@RollingWrench
@RollingWrench 5 жыл бұрын
Because the ice cube relay is used to kill the engine and it’s AC power. Ac power in the relay at a high idle arcs shorting out the relay, causing a no power issue. It’s just a really bad design. In my opinion the dc cdi box is the answer.
@daveb11230
@daveb11230 5 жыл бұрын
Rolling Wrench Glad I asked! Thank you. Glad you’re tackling a reliable turbo kit and an EFI kit too! Keep up the good work dude!
@RollingWrench
@RollingWrench 5 жыл бұрын
Dave NoLastName I have no idea if the turbo will work out. Thanks for the support 🙏
@q8hektor
@q8hektor 5 жыл бұрын
Awesome 👏🏼 can i fit this kit on 232 taida ?
@richieonyt5815
@richieonyt5815 3 жыл бұрын
Yup
@civiking1984
@civiking1984 5 жыл бұрын
When will this be available?
@bbface2580
@bbface2580 3 жыл бұрын
I am from the philippines, is it possible for me to purchase this FI kit from you? how dfo I do that? thanks mate!
@SaiedKarmally
@SaiedKarmally 5 жыл бұрын
Hey Brother awesome video. I have a Zongshen 200GY-2 Sierra 200cc. Do you have any kits that i could use to do a EFI conversion? Please direct me if you do. I have a new engine installed is a CG-150 ENGINE.
@tylerpataska309
@tylerpataska309 5 жыл бұрын
Were on the website can I find the plug n play kit?? I only see diy and the conversion kit, no pnp!
@RollingWrench
@RollingWrench 5 жыл бұрын
I don’t have them on the site yet. Email us I can sell you one. I have to finish the product video before it goes for sale
@gregorymasincup7540
@gregorymasincup7540 4 жыл бұрын
I just love your ego kit will it work on the Suzuki drz 400?
@RollingWrench
@RollingWrench 4 жыл бұрын
Unfortunately no :-(
@gregorymasincup7540
@gregorymasincup7540 4 жыл бұрын
@@RollingWrench bummer will you make one some day
@DobleWhiteAndStabley
@DobleWhiteAndStabley 5 жыл бұрын
But expensive compared to a carburetor, but! I wholly understand where that price is coming from... Lol, I still wish I can afford it though. 😁 But I need to buy a 150 gy6 motor for a build I'm doing.
@laurenceleeroceta8772
@laurenceleeroceta8772 5 жыл бұрын
Hello sir roughly how much the efi kit?
@RollingWrench
@RollingWrench 5 жыл бұрын
In the range of $600 no concrete price yet.
@kudder55
@kudder55 3 жыл бұрын
Can u make a 26mm for 125cc like china grom clones and groms or z125s.
@0643wes
@0643wes 4 жыл бұрын
Will it work on a taotao 150
@danieldarden3384
@danieldarden3384 5 жыл бұрын
so u can do this in a 80cc chineze gy6?
@oualieddinemekhzoumi3599
@oualieddinemekhzoumi3599 5 жыл бұрын
So you've removed the carburetor !! Impressive..
@DrLove911
@DrLove911 5 жыл бұрын
He also designed that whole bolt on EFI kit . It's better cheaper and easier to install than the only other one you can find on the internet. WTF have you done?
@a.r.d9650
@a.r.d9650 4 жыл бұрын
@@DrLove911 he didnt design it he just got it from china and maybe added parts you can get almost the same kit on alieexpres
@Bluenosedogman
@Bluenosedogman 3 жыл бұрын
@@a.r.d9650 wow no probs for the young old dude huh
@cpedraza6675
@cpedraza6675 5 жыл бұрын
Do you know when the plug and play Efi will be available?
@RollingWrench
@RollingWrench 5 жыл бұрын
It’s done! I just need more time to get it on the site, and edit the product video. Not enough time in the day 😬
@brahimmohri4193
@brahimmohri4193 4 жыл бұрын
cool but how about the air filtter?
@RollingWrench
@RollingWrench 4 жыл бұрын
What about the air filter ?
@JAYJAY1787
@JAYJAY1787 4 жыл бұрын
Does the pump have to be standing straight up? Or can I mount it where the points face down?
@RollingWrench
@RollingWrench 4 жыл бұрын
Definitely keep it vertical. Otherwise you will have issues
@JAYJAY1787
@JAYJAY1787 4 жыл бұрын
Rolling Wrench Scooter, Motorcycle, & ATV Yep just switched it around now and got the fuel pump working as it should I appreciate you taking out the time to help!
@abhishekratha9890
@abhishekratha9890 5 жыл бұрын
Hello Sir this efi kit installation in old model Royal Enfield it's possible.
@RollingWrench
@RollingWrench 5 жыл бұрын
No, this kit wouldn’t be a good fit
@SuelioOo
@SuelioOo 5 жыл бұрын
Eu consigo aplicar este equipamento em uma cb 250f 2006?
@SuelioOo
@SuelioOo 5 жыл бұрын
May i apply this iten in a cb 250f?
@dedeabsrn8044
@dedeabsrn8044 3 жыл бұрын
EFI? or carburetor? Which one is better?
@RollingWrench
@RollingWrench 3 жыл бұрын
EFI 💯 %
@maxxestevez3790
@maxxestevez3790 4 жыл бұрын
Can this be used with tao tao atm
@hendridailywork
@hendridailywork 5 жыл бұрын
Thats is not to Change the magnetic rotor dude? Please Reply thanks
@RollingWrench
@RollingWrench 5 жыл бұрын
I don’t understand the question.
@hendridailywork
@hendridailywork 5 жыл бұрын
@@RollingWrench i mean Are there changes in the pickup signal of pulser on magnetic spool if we are changes from carburator to fuel injection? Im sorry maybe you not understand about that
@RollingWrench
@RollingWrench 5 жыл бұрын
you can Do it no changes, you would use the existing pickup from your 11 pole stator on your GY6
@hendridailywork
@hendridailywork 5 жыл бұрын
@@RollingWrench oh i see , thanks dude
@DrLove911
@DrLove911 5 жыл бұрын
Can you blow a supercharger thru that EFI?
@RollingWrench
@RollingWrench 5 жыл бұрын
Yes
@lpz3665
@lpz3665 5 жыл бұрын
Water displacement 40th formula
@hojnikb
@hojnikb 5 жыл бұрын
Can someone tell me the difference between this kit and the one on aliexpress (small engine efi) ? Also, for a 50cc 139qmb, is 8 pole stator enough to run everything?
@hojnikb
@hojnikb 5 жыл бұрын
another question; is it possible to improve economy with this kit (with the right tune)?
@RollingWrench
@RollingWrench 5 жыл бұрын
Our kit is plug and play pre tuned, with a hand controller. All other kits on the market are not plug and play and require extending/shortening wires, tuning knowledge and software knowledge. We have spent over a year of beta testing this kit with around 20 testers. Our kit comes pre tuned, no software tuning. Everything is tuned with our exclusive hand tuner. 8 pole starter will not support EFI. You need 11 pole min.
@marco21falcon
@marco21falcon 5 жыл бұрын
What's the difference between your diy and(cuss warning) ecotrons?
@RollingWrench
@RollingWrench 5 жыл бұрын
I don’t sell my DIY anymore, it was a tech support nightmare.
@marco21falcon
@marco21falcon 5 жыл бұрын
@@RollingWrench Good to know. Where is the Plug and play?
@RollingWrench
@RollingWrench 5 жыл бұрын
marco21falcon I don’t have it on the site, I have just been selling them through email so I can ask questions before the sale
@damndoor3570
@damndoor3570 5 жыл бұрын
Would this work on non gy6 applications? Like say a gz250? Lol with some improvisations that is
@forevercomputing
@forevercomputing 4 жыл бұрын
The concern is the intake manifold and some different wiring used.
@GTrainRx7
@GTrainRx7 4 жыл бұрын
Please use months. Spring is different in different hemispheres.
@timothywintle5937
@timothywintle5937 4 жыл бұрын
Bro, he said Spring 2019...it doesn't matter where you are in the world. Spring 2019 is over.
@GTrainRx7
@GTrainRx7 4 жыл бұрын
@@timothywintle5937 So? I didn't ask to go back in time, what's you point?
@timothywintle5937
@timothywintle5937 4 жыл бұрын
@@GTrainRx7 There was no need for clarification since no matter what hemisphere you live in, the kit had already been released.
@GTrainRx7
@GTrainRx7 4 жыл бұрын
@@timothywintle5937 Yeah, no need to mention it, might as well cause confusion every time in the future as well. That sounds smart.
@timothywintle5937
@timothywintle5937 4 жыл бұрын
@@GTrainRx7 Use contextual clues man. It's wildly easy. On top of the fact that more than three quarters of the population of the entire planet live in the northern hemisphere anyway.
@KBOSGroundAgent
@KBOSGroundAgent 5 жыл бұрын
I ripped out my ecotrons. I put my fucking carb back in. I could not nail my tuning. Now I have a $700 wired paperweight.
@RollingWrench
@RollingWrench 5 жыл бұрын
😬 tuning isn’t easy. That’s for sure
@tabascoeater3
@tabascoeater3 5 жыл бұрын
Can this work for a buggy 150cc gy6??? If so I’ll buy it
@RollingWrench
@RollingWrench 5 жыл бұрын
Yes, I sell these kits all the time
@tabascoeater3
@tabascoeater3 5 жыл бұрын
Rolling Wrench do I need to buy a different wiring harness? The buggy’s have different hardnesses I’m sure
@RollingWrench
@RollingWrench 5 жыл бұрын
tabascoeater3 no, email us. Rollingwrenchdenver@gmail.com
@just4kicks950
@just4kicks950 5 жыл бұрын
Damn the EFI plug & play is Tuff, nice ! How would that work in a Chinese scooter? I know it's a clone. Just getting started in all the upgrades ! I know carbs & gy6 motors but when it comes to EFI not so much LOL. Very nice research & hard work 👏👏👊 Much respect. Salute 🔥🔥😎
@RollingWrench
@RollingWrench 5 жыл бұрын
Thanks dude! It will work in any GY6 150cc and up
@just4kicks950
@just4kicks950 5 жыл бұрын
@@RollingWrench cool ! Is it fairly easy to tune ! Just bought the scoot & already did the big bore kit 171 & it runs like a top as is but ,just something to make it more reliable in the long run !
@bigdaddy5285
@bigdaddy5285 3 жыл бұрын
What happened to this kit? Was it not reliable or what?
@RollingWrench
@RollingWrench 3 жыл бұрын
Back to beta testing....
@laborer4321
@laborer4321 3 жыл бұрын
@@RollingWrench I am about to install one of your efi kits on a get ruckus. Anything I need to be on the lookout for
@JayLaVita
@JayLaVita 5 жыл бұрын
Will this work on a 125 grom clone?
@RollingWrench
@RollingWrench 5 жыл бұрын
No, the charging system won’t hold up: kzbin.info/www/bejne/e5uqkqiQhbt8pZY
@ogmagi
@ogmagi 3 жыл бұрын
@@RollingWrench if I upgrade stator would this work??
@joshuacastillo8047
@joshuacastillo8047 4 жыл бұрын
Does this work with a honda dio 2 engine
@RollingWrench
@RollingWrench 4 жыл бұрын
O lot on the GY6... for now
@TheTaino1986
@TheTaino1986 2 жыл бұрын
I want this so bad for my gy6
@fdfgaming9076
@fdfgaming9076 3 жыл бұрын
This won't work on 50cc ?
@RollingWrench
@RollingWrench 3 жыл бұрын
No :-( not enough stator power
@fdfgaming9076
@fdfgaming9076 3 жыл бұрын
@@RollingWrench is there an efi that would work for it ? And wow thanks for responding after so long 🙏
@RollingWrench
@RollingWrench 3 жыл бұрын
@@fdfgaming9076 the power draw is the issue. Solve that and it would work. 😛💯
@P.Em.
@P.Em. 5 жыл бұрын
Hi, been watching and learning from your channel and i have been wondering if your Kymco S8 EFI kit will also be compatible with Kymco Like 125cc (upgraded block to 58.5(155cc) not so fuel efficient anymore), i'm planning to fuel inject my carb Like. do you recommend the EFI DIY kit or the no Computer EFI kit? Thanks!
@RollingWrench
@RollingWrench 5 жыл бұрын
Yes it will work with our plug and play kit
@jacobtucker6819
@jacobtucker6819 5 жыл бұрын
Yea I have 100cc for the icebear maddog ruckus clone 49cc
@MrGreenelight
@MrGreenelight 5 жыл бұрын
WD 40 stand for is Water Displacement not water desolver
@RollingWrench
@RollingWrench 5 жыл бұрын
Thank you.
@angelchan430
@angelchan430 5 жыл бұрын
Nice one
@casper1836
@casper1836 5 жыл бұрын
Update?
@RollingWrench
@RollingWrench 5 жыл бұрын
It’s ready, I just need to finish the product video and it’s ready.
@karmaplays468
@karmaplays468 3 жыл бұрын
the diy says 404 not found on rolling wrench
@RollingWrench
@RollingWrench 3 жыл бұрын
We stopped selling them
@jacobtucker6819
@jacobtucker6819 5 жыл бұрын
Am big fav amazing video that help me
@jasonhowell9589
@jasonhowell9589 4 жыл бұрын
Because I would like to put this on my pit bike if it would work
@pierdolio
@pierdolio 5 жыл бұрын
You rock!
@RollingWrench
@RollingWrench 5 жыл бұрын
Thank you 🙏
@brocephusbro-cee-fus1367
@brocephusbro-cee-fus1367 3 жыл бұрын
Water displacement formula #40
GY6 171cc Fuel injection Honda Ruckus project
19:02
Rolling Wrench
Рет қаралды 24 М.
Увеличили моцареллу для @Lorenzo.bagnati
00:48
Кушать Хочу
Рет қаралды 7 МЛН
Can You Find Hulk's True Love? Real vs Fake Girlfriend Challenge | Roblox 3D
00:24
Players push long pins through a cardboard box attempting to pop the balloon!
00:31
Человек паук уже не тот
00:32
Miracle
Рет қаралды 4,4 МЛН
GY6 Plug & Play EFI / ProHarness GY6 Ruckus Wiring harness UPDATE
8:43
HOW TO TEST A STATOR / WHAT IS A STATOR [step by step] GY6
20:45
Rolling Wrench
Рет қаралды 1,2 МЛН
The Best Carb Money Can Buy? | SmartCarb SC2
13:25
Chaos Causes
Рет қаралды 2,7 МЛН
Methanol Tuning Basics
19:39
Turbine Research
Рет қаралды 9 М.
(BETA TESTERS ONLY... for now)Rolling Wrench GY6 EFI kit install video
23:08
Увеличили моцареллу для @Lorenzo.bagnati
00:48
Кушать Хочу
Рет қаралды 7 МЛН