GY6 Ruckus SIMPLE wiring [PART 5]

THE GY6 WIRING HARNESS:
www.rollingwre...
THE FULL GY6 RUCKUS KIT:
www.rollingwre...
If you are thinking of swapping your ruckus to a GY6 or already have and are having wiring issues, this may be up your alley. Through the years I have seen it all. most issues with a GY6 swap comes from the wiring. Why not use the durability of the stock Honda Ruckus electrical system to power your GY6? We have the ultimate solution........ and it installs in 20 min. no need to know how to wire anything.
Episode 1:
• Honda Ruckus GY6 swap ...
Episode 2:
• Honda Ruckus GY6 swap ...
Episode 3:
• How to stretch a tire ...
Episode 4:
• Honda Ruckus GY6 Engin...

[@Iamtherealsun]

Best gy6 video series on youtube by far! Would love to see a full on video for jetting the carburetor with full explanation of how it works!

[@RollingWrench]

Thanks for the support 🙏. I can make that video happen. KZbin needs a good GY6 jetting video.

[@Iamtherealsun]

Rolling Wrench absolutely agree with you on that one!

[@nc240coupe]

So much advice in these videos that prevent complete disaster for someone doing a install, like the connectors and bolt length, that only one had learned from trial and error and messing up their day 😅 we are thankful for those tips!

[@DONOD68]

I bought everything for my metruck project from Matt at rolling wrench and have zero complaints, the guy knows his stuff. EFI will be next and many more upgrades. Thanks Matt for everything

[@RollingWrench]

Thanks for the support Donavan 🙏. Your Metruck is the best I have ever seen! You did a killer job!

[@Scarbuckks]

I bought a GY6 swapped project bike and thought it was some hack job wiring harness due to the state of the bike, watched the video and things started to line up. I'm pretty sure it's your harness, but with some "surprises". This made it all make so much more sense and now I'm pretty sure I'm ready to finish the bike and start it up! Thanks!

[@officialahmad0.7]

I don't understand your language but I understand your video

[@mariewarrington992]

Dude puts locktight on his french fries

[@RollingWrench]

Lol, true

[@jeepingneatus]

You have to when your French Fries vibrate like a mofo!

[@donniefish6362]

That is a sweet looking bike learn some stuff on wiring I’m not too good at that can’t wait to see your next video love watching you👍👍👍

[@RollingWrench]

The ditech is fuel injected so that’s a little different. The fuel isn’t pulled into the engine by vacuum. Thanks for all the positive support Donnie 🙏😛

[@RollingWrench]

Perfect 👌 thanks again for watching :-)

[@manipulators2007]

I will give you my money soon!!! thank you for the great video!

[@JeMalbas0385]

Nice assembly men👌

[@RollingWrench]

Thanks dude! She loved it!

[@JeMalbas0385]

@@RollingWrench nice and simple👌

[@cookingbacon3085]

Working on installing my rolling wrench harness, only complaint is it didnt come with hardware to attach positive cable to starter.

[@RollingWrench]

Hey dude! It’s super simple. The gy6 engine comes with a cable attached to the starter. Clip the nut off the cable and use it with the provided screw. That’s the reason we don’t include it anymore. That process works best.

[@cookingbacon3085]

@@RollingWrench I see, it looks like the cable that was on the starter has the nut/threads built into it. Like the bolt screws right into the cable itself, it doesnt sandwich between a bolt and a nut. I should be able to use the battery cable type hardware but I just need to make the hole on the starter connector a tad bigger.

[@RollingWrench]

@@cookingbacon3085 you shouldn’t need to make it bigger. Just cut the nut off the cable and use the screw to attach

[@officialahmad0.7]

Good job Mr.

[@motochris8947]

Very nice video, learned a lot

[@RollingWrench]

Thank you! I appreciate the support!

[@christiangutierrez83]

Do you need to keep the OEM control module plugged in or can it be removed?

[@jaysony5751]

Do u like the 232cc builds or no? You seem knowledgeable

[@timsmith1589]

That's pretty cool, what would you say it's too speed would be, also are there shock/spring combo's that will stiffen up the suspension for heavier riders?

[@RollingWrench]

Top speed around 65 with no mods. Depending on the conditions and rider. Suspension can be adjusted for heavier riders

[@KPBiker99phuket]

wow!!!

[@sebastianwolfinger1217]

Hey komm aus German und mir gefallen deine Videos wolte mal fragen bei uns in german gibt es keine Teile für den Honda zoomer und bei uns ist echt schwer mit den TÜV wegen motor hättest du eine Möglichkeit was es da gibt zum eintragen schöne Grüße wolfinger aus german 🇩🇪🇩🇪

[@badmonkey2222]

Got to have one . Order coming soon!!!... Did you say you were running open exaust no baffle?

[@YoutubePremium-td3yg]

Can this harness be used with the Japanese Zoomer? The Japanese Zoomer does not have a kill switch. Therefore, the wiring in the switch box has only two poles.

[@williamlagi9871]

Awesome dude😁

[@yasppa]

Can I order that gy6 stretch kit from S.Korea?? And I want to know top speed.

[@user-zy5et8ic1h]

ผมชอบรถที่คุณทำมากๆ สวยสุดยอดเลยครับ

[@DatMothBoi]

Is there an upgraded Speedo that we could buy?

[@miguelpagansr6128]

would this system with a chinese made gy6 engine? i might consider installing it on a honda express. thanks.

[@jefferyyoung5401]

If you do your gy6 build on a 125cc, you can still mount from the bottom. just an FYI

[@RollingWrench]

Yes. Qmj157 and qmi152 is the same mounting

[@dadygee]

Funny that the same motor comes from 50cc up to 150cc and a street legal (over here) have a few, easy to remove, devices that limits top speed to ~25mph.. the 125cc versions just have more plastic to look bigger. But the ruckus, they all look the same. If you strip down one of those "china scooters" to the frame, the biggest difference is placement of battery and gas tank. But then you have all the cheap plastic stuff where the ruckus have casted aluminium..

[@vernonhochstetler7608]

Hey Matt what if your using after market controls? Will the brake sensor for starting mess it up?

[@Stitch_Mfs]

I need a stator upgrade for my 03 kymco super 9 lc you have any recommendations man?

[@miguelpagansr6128]

Hey rolling wrench, love your channel is there a voltage regulator rectifier for a magneto that you would recommend? I have I yellow lead from the stator and the regulator needs to have a 12 VDC on the output, thanks in advance stay well see you on the next video.

[@RollingWrench]

What harness are you running with the GY6?

[@sethmcbane1219]

I got a TRS left hand control and we’re having trouble wiring it to our psp wiring harness, do you have any tips for it?

[@RollingWrench]

We have a plug and play left hand control. That will make life easy

[@franciscocavazos7]

Do I need to buy 22-24mm carb upgrade for the engine or do I use the original that came with the ruckus?

[@millytorres78]

Does this would fit to a ice bear mad dog ? Being that its the clone of the ruckus

[@tripplecee_6268]

Lol only if you where local to do my swap 😂😢 you made it look so easy . Idk if i should buy all these parts now since you can use the oem ones . But alot of mechanics tell me to get new 150cc parts like fuel pumps amd stuff. Cause it wouldnt work with the original GET motor atuff

[@RollingWrench]

Keep as much of the stuff Honda as possible. Keep it reliable!

[@swampe_rat]

Hey Matt: Does the original harness ground need to be mounted to the starter mount bolt and or can you attach it to a valve cover bolt or left over frame mount like for the radiator over flow bottle? I REALLY do not want to CVT and ankle bitter apart…..

[@RollingWrench]

Just be sure it’s attached to a good ground on the engine if you don’t want to go directly to the starter

[@swampe_rat]

@@RollingWrench T Thanks Matt!

[@Dersiveredlight]

Please show me how to do the met 20min ket

[@RollingWrench]

I do t have a vid. But o do have a kit: www.rollingwrenchdenver.com/products/gy6-metruck-wiring-harness-20-min-install

[@musikalogueoyeneyo1879]

Nice video tutorial... I wish i also could have one... 😭 can you send it to me as a gift? 😁 more tutorial! God bless brother...

[@omarrivera3535]

Do you have a kit like this for the maddog 150cc?

[@jamesrickwood6333]

Would the wiring kit work with a efi model ?

[@szypki_zygi]

Why you dont want backfiring(afterfiring), Flames from exhaust are cool.

[@RollingWrench]

It might be cool, but that means your engine is to lean.... not good. Lean = Hot air cooled engine

[@szypki_zygi]

@@RollingWrench but the air is going straight i to the exhaust, not the cylinder. Even if this is the case u can give it more fuel

[@TheErnestoq]

Hey Matt I have a 2022 and I did the after market start and kill switch and im going to buy the gy6 harness my ? Is how Do I contact the Evi to the after market start and kill switch

[@RollingWrench]

It just plugs inline. Same as if you had the stock start kill. Super simple

[@TheErnestoq]

@@RollingWrench I'm not sure if you understand what I mean so I have the aftermarket start and kill switch already righ how do i connect the Evi to the aftermarket switch i hope im Explaining it right....and im getting the Evi for the 150cc 11 po ....what kit should I get ....

[@HubbyHunn]

Does this work for the metropolitan?

[@RollingWrench]

No. But I do have a METRUCK harness

[@OBXskaterboy]

Is the kit year specific? I have a 2022 and would love todo this kit. thanks

[@RollingWrench]

The ruckus hasn’t changed since it’s original design in 2002. All these parts apply to your brand new ruck :-)

[@shawnwillis767]

What’s the mpg?

[@johnkealohafero8900]

Does anyone know if this wiring harness is compatible with a Kymco people 150cc motor ?? And what happens if the cdi goes out do you have to replace the whole unit ?

[@RollingWrench]

No, it’s not compatible:-(

[@jimmy_thelego_kid301]

Will these be back in stock anytime soon?

[@RollingWrench]

2-3 days they will be back

[@gregatron4528]

What is going with an 11 pole stator benefit? Is that if you want to put less stress on the battery and add more electronics like lighting or cigarette adapter or something?

[@that_texas_local]

Gregory Megatron That’s correct, or if you’ll be installing extra lighting like LEDs

[@RollingWrench]

The other thing is it meshes with the stock ruckus rectifier regulator.

[@gregatron4528]

@@RollingWrench alright thanks guys! I did buy a couple rock lights [they go in the fender of a jeep wrangler or 4x4] and I need to add a couple other items so this would be a nice idea. I have a video idea for you as well RW .. You mention keeping the ruckus fuel pump .. How about a video for those of us that have a regular gy6 scooter .. and lets say I wanna go on eBay and buy a ruckus fuel pump? Is it just that simple? unplugging the petcock and switching it with a fuel pump? That would be the video idea.

[@RollingWrench]

Gregory Megatron if you have a basic gy6 with a gas tank above the engine. This can be fed by gravity unlike a ruckus. This is much more reliable. If you have a basic GY6 scooter with a gas tank below the motor they run a fuel pump. I would recommend a electric pump. The vacuum pumps are fine until the bike has been siting for months.

[@gio527]

Hey I'm in colorado . I have a rukus is there any way I can chop it up with you im trying to get it running

[@EbolaSquirrel]

dude just check his website

[@henrytep3398]

do i need the auto choke plug if i run a slide carb with manual choke and would it interfere?

[@RollingWrench]

No you don’t :-)

[@quinton7854]

sold gy6 swap lol, tops out that speedo like nothing

[@blairewalker3091]

Will these ever be back in stock on the website??????

[@RollingWrench]

Oh ya! 2 weeks or so.

[@blairewalker3091]

@@RollingWrench phew, i was looking at the 190cc drop in and saw this harness wasnt available. So stoked to hear that 🤙🤙

[@adamkania8432]

Where are you located?

[@RollingWrench]

Colorado

[@christiangalindo1376]

Hello does this still works on a maddog 150cc

[@RollingWrench]

No, unfortunately. It adapts the the ruckus harness. Maddog is different

[@christiangalindo1376]

@@RollingWrench ok thank you for all you do and the reply

[@bradfaught1695]

I take it one of the connectors wasn't making a connection...hence the cutscene when starting it?

[@RollingWrench]

No, it was the first start and it cranked for ever before it started, didn’t want to bore you with a long drawn out starter noise.

[@bradfaught1695]

I understand, brand new engine and all...I appriciate the content, a very thorough build.

[@CynicalDad81]

Do they make a wider tire so you don’t have to do the super ghey pop out?

[@RollingWrench]

8 inch is the widest I know of

[@jimmy_thelego_kid301]

You would want a smaller wheel not a bigger tire. It’s a clearance issue...

[@RollingWrench]

You can go 5 inch, 7 inch or 8 inch. The only time I haven’t seen the wheel lip exposed is with a gold kart tire, but it gives it a square look... I don’t like it, ride odd as well

[@robox_autoshine]

I have my ruckus turns on runs good but its not charging the battery fast enough so my battery dies quick ..i dont know if is the hardness or regulator or something else ..

[@EbolaSquirrel]

ride it out

[@robox_autoshine]

Chef Boyardee i want to but battery dies .. lol

[@Slowjoe211]

Will this harness work for the metropolitan as well? Or are they different?

[@that_texas_local]

JoeyD JoeyD I’ve worked on both, the ruckus and metropolitan, and this is RUCKUS specific. The metropolitan has its battery mounted towards the back of the bike. Where as the ruckus has its battery near the front. You’ll run into cable length issues. You’ll have way too much power cable since it doesn’t have to reach the front battery. Which would be fine since you can always roll it up. But then there’s the right hand control that you have to plug in-line. That part of the harness still needs to go towards the front.

[@Slowjoe211]

@@that_texas_local so it would have to me a metropolitan specific kit or extend the right hand control plug in line?

[@that_texas_local]

JoeyD Also the brake sensor coming off the starter solenoid connector

[@Slowjoe211]

@@that_texas_local hmmmm.

[@RollingWrench]

I have a metruck kit. It’s not on the website, but I have sold a few. Let me know if you want me to build you one.

[@iqom2012]

can i order this bike from u to malaysia.....

[@user-nv2gp7fx2g]

Is it the same harness for a big ruckus?

[@RollingWrench]

No

[@user-nv2gp7fx2g]

@@RollingWrench where can I find one? Is there a website?

[@RollingWrench]

Edric Politano link in the description of the video

[@naytattoos1239]

Will it work if you have a ncy cdi

[@RollingWrench]

No, but it will if you remove it. Our cdi is much much better anyways

[@user-om4pi1un9z]

How much does it cost to do that?

[@RollingWrench]

www.rollingwrenchdenver.com/products/complete-honda-ruckus-gy6-swap-kit

[@user-om4pi1un9z]

@@RollingWrench Thank you, but does it include the GY6 engine? By any chance, how much do you charge for the finished product?

[@AlexisMartinez-nl5py]

what size of wheel are those ?

[@RollingWrench]

12x8

[@jyg345]

where are you who state

[@RollingWrench]

Colorado

[@marcojimenez5282]

🤘🤙

[@6ojiwoucteh]

Я один русский смотрю этот стенс)

[@humanbeingfromearth]

Just so you know, this is an ac system

[@RollingWrench]

The stator is ac and the cdi is dc.

[@Motz-js2ib]

$2,300 for the kit 🤔

[@RollingWrench]

People aren’t used to a complete kit. This kit has everything, no extras to buy.