HACKSHOP GARAGE - THE FULL SHED TOUR - Layout, tools, workshop hacks and the cost!

In this episode, we take a walk around the Shed and answer your questions about it and the stuff that lives inside it.
Apologies for the dirt spot on the right hand side of the screen, we didn't realise it was there until after we have finished filming.
If you would like to support the show, Hackshop Garage Merch is available at www.hackshopgarage.com.au
Also be sure to follow our socials for up to date content.
Instagram - @Hackshop_garage
Facebook - Hackshop_garage
Nathan - @crazycamo

[@weldmachine]

Great Video. Great Shop. and of course Great Mates. You 2 guys really make this channel worth watching. Thanks for the shed tour, super impressed by your level of organization. Seeing how organized your are makes me feel better about how fussy i am in my shop. Thanks for bringing us along. All the best. Peter.

[@lewisbrogden8670]

Need some more shed tours! Only have just come across these vids and they’re very inspirational!! Cheers fellas keep up the good work

[@ryanr9348]

Very well thought out shed design. Top work 👌

[@KoverageContractors]

This is awesome. Love touring finished products

[@simonlombardo6576]

So jealous 🤣 awesome setup fellas. Can't wait to have a decent shed 👍👍 love the makeshift spray booth idea at the back, even if it wasn't quiet big enough, I recon I'll steal that idea one day 👍👍

[@1080sucks]

Shed tour was great. Great ideas. Means I have to lift my game a LOT

[@hqwoody327]

Thanks for the tour! It's a beauty!

[@BADQ]

Terrific video guys absolutely brilliant!

[@charlesgalea69]

Awesome video today guys thanks

[@glennman5619]

Love the storage trays in the bench.

[@matthewtirchett2498]

Legends! Great channel, killa shed 🤙

[@OvertakingLane]

Loved the tour, some great ideas there !!

[@aaronhogan2371]

Great vid fellas! I'm envious of the set up. Tons of great ideas implemented.

[@HackshopGarage]

Thanks mate

[@_HACtv_]

Lovin the offerings wall! Haha

[@MicahBell_1860]

An organised workshop is the sign of a sick mind Paints stored behind the rollout toolboxes is a brilliant idea

[@morgansword]

I would think that a four post rolling lift would be so handy in a shop like that. Bent metal and a lift can make it come the direction that you need. Also a good plasma cutter for trimming the odd things under a rig that isn't accessible any other way. A necessary thing is good ventilation. Fumes from fuel tanks and doing the carbon canisters not to get into the many engine/transmission testers. I also like having space for the second project as stuff is not down when you need a part, stop that one till the items needed show and move over to the other.

[@mike8hunter]

The shelving looks linkable, I have something similar in my storage unit. Left to right is riser-shelves-shared riser- shelves-shared riser-shelves- riser, that way I could keep my shelves as close together as possible. And I have set it up with a 2m open work bench in the middle with a 2in hitch set up supporting my vise or grinder.

[@bradfordblowthe1193]

Great Video. I’ve been looking for exactly this! Just got my slab poured and about to erect shed kit myself. 12 x 7m. You have me nervous now!

[@colster3]

Thanks for the tour, a lathe and a small mill are the best 2 additions! Do it!! You won’t regret it, even better than the welder

[@HackshopGarage]

Haha one day!

[@grayzbildz]

Some good ideas and inspiration for my upcoming shed build guys. Well done. Cheers, Andy.

[@HackshopGarage]

Thanks mate, enjoy setting it up

[@samuelbroad11]

Love the shrine to the god of speed, two options for the camshaft. The first, a candelabra so that you can light a flame when a new piece is presented on the altar. An open flame could be a little dangerous. The second, weld half an old circular saw blade to one end to make a Mad Max battleaxe, this could be a little dangerous, so mount it high up out of reach. cool weapons have tassels off the handle so dangle old car key chains and skulls off it. Love how relaxed in front of the camera you are.

[@rayban5737]

Cool garage... usable and fesiable Subscribed 👍

[@AndrewBrubaker]

This is awesome!!

[@michaelhanley7580]

Awesome episode!! what an amazing setup

[@HackshopGarage]

Thanks mate, much appreciated

[@stevepierce3509]

Hoppers Crossing Lads ? Im 52 and grew up as a kid there, born and bred in the old area of Hoppers. I guess you must be out wide in new estates that have progressed there ? Old Geelong road I used to catch Rabbits and done my apprenticeship at a very well known business there called Bronson Sheetmetal. The owner who established it (me being there first employee) has a passion for old cars. Good on you lads, unfortunately Hoppers Crossing is not what it once was many years ago , as same as Werribee. My Parents are still there and my Father is a dedicated motor enthusiast all his life that is connected to the Werribee Car Club. Love your videos, and itching to see more progress on the XY asap.

[@Tkf62]

You guys are legendary love your vids

[@tonychandler8908]

You have done a great job with your shop I love it

[@HackshopGarage]

Thanks mate, much appreciated

[@adda58]

Just discovered your channel, great stuff! You didnt mention the storage racking - looks pretty heavy duty. My shed is nearly completed now and i need to get some quality racking for both steel and wood, and of course all the stuff collected over the years. Looking for racking recommendations.

[@xjoshua2764]

Fabricate a letterbox on top of the old camshaft, and then concrete it in the ground out the front of your house...👌

[@HackshopGarage]

Haha I like it

[@seanalexander9531]

Great video guys - just subscribed 🤘

[@workingmansrestorations7071]

I have 2 cutters set up also. Took so much time swapping from cut off to flap disc..

[@bruceyblowback8748]

Nice setup.

[@mattgray5311]

Love the Burt Munro tribute, offerings to the god of speed

[@poydapoyderson646]

I spotted a can crusher you didn’t mention. Kudos

[@lidZ78]

Great video guys! Finally somebody who’s not scared to show their setup. Been looking for ages for shed setup videos on KZbin (in regards to lighting/electrical & general setup) for ages but have never had much luck finding Aussie videos on the subject. Well done!

[@HackshopGarage]

Thanks mate, much appreciated

[@workingmansrestorations7071]

Good idea on the sandpaper

[@mitchellcourtney1660]

Hi guys your show is grate one question on the shed is do you have 3 phase power in it I have a 10 meter buy 6 meter shed with 3 phase power I have 9 banks of lights on the roof and lights on the walls ideal for painting

[@harry8506]

The Oxy was my favorite tool years ago, we found an excuse to use it on almost every job, still love it but its too expensive now to use.

[@Madbart66]

Just stumbled across your channel tonight looking for garage builds. Will be undertaking mine in the first half of the year and will be going 11m x 8m. Layout will be very similar to yours. Also look forward to your next meet. Will bring out my shitter!

[@HackshopGarage]

Sounds good mate, that’ll be a good shed

[@michaelstanbrough6115]

Thanks for the tour. It was great. What is the width of the roller doors you use. They look about the size I need.

[@rossinnz]

Good One

[@NEAT4X4]

you boys are the best, laughs all round nice one lads might see yas out one day!

[@HackshopGarage]

Haha thanks mate

[@NEAT4X4]

@@HackshopGarage should get the old patrols out for a play date ahaha cheeky vid

[@downtheshedwithbyron]

Bloody hell now you've given me heaps of ideas of what I should do to my shed in between the 100 projects ive got on the go haha

[@HackshopGarage]

It never ends mate haha

[@downtheshedwithbyron]

Forgot to say my favourite tool that I've got is a set of knipex multigrips Dirty thumbs up 👍 Byron

[@HackshopGarage]

They are on my to buy list! I’ve had a quick look at them and they look awesome

[@TheDistur]

Hi Loki. Good dog.

[@MrLincoln87]

This side of the shed Heres the brooms and shit hahah perfect

[@RaceCrewz]

Stumbled across your channel, and really liked the shed tour. Now subscribed. I’m surprised you don’t have a drill press.

[@HackshopGarage]

Haha it’s on the ‘really need to buy list’

[@danielcantrill3104]

Another great video. Love your work

[@Jason_Connolly]

Great video, first one I watched when I was looking for shed ideas myself, it gives me confidence as I had similar layout. You probably also saved me making some mistakes. What internal ceiling height/clearance do you have for your hoist? I have now subscribed, keep up the great work

[@HackshopGarage]

Thanks mate, great to hear. The internal ceiling height for the hoist area is at the lowest point 3.7m.

[@MrLincoln87]

Cool tour I think the only thing you need to add, is more light. Maybe a light dedicated for the camera. And thats only from a youtube perspective

[@b-rad5600]

What colours are used for this shed? goes very well together!

[@pcculley]

Straight 6 cams make good bar / welding stools

[@TheShedSesh]

TSS approves 😂 haha.... just enough room in that specialty tool cabinet for a dimple die set 😉

[@HackshopGarage]

You know, we agree with you on that haha

[@aaronhogan2371]

@The Shed Sesh You just got a new sub

[@smith5674]

I have seen a cam shaft in a garage once that has hooks added to make it into a coat hanger on the side…. Could be an idea

[@mcjjordan]

My mate had similar height restrictions - so he dug down to get the ramp height

[@pompommom4904]

How much height should I allow for a domestic car hoist?

[@mickchristo6383]

Do you have a link of the concrete paint ?

[@rodgah01]

Fellas I know this is a weird one but what brand is your screwdriver set with the acetate handles. I've been searching for that one that doesn't feel like a Lego block in your hand

[@MattyWillo]

Ah yes, a bench to house the coleslaw

[@dtec30]

Fast cap kaizen foam for the draws guys

[@302esky]

best size to use is 12mtr x 10mts 3.5m H side wall with a 23deg pitch roof that way you got height for a hoists or two on each side .. When i win the lotto again ill rebuild it

[@smokinthem351]

One thing i would like nto add, if your welding helmet has a solar panel in it to keep the battery charged it might help to keep it stored somewhere it can get some light. Will prolong the battery life is all and just a thought ;)

[@HackshopGarage]

That’s a great point, I had never thought of that, thanks for pointing that out mate

[@terryjackson4538]

The solar panel charges as you weld, that's why it faces the same way as the lens or is part of the lens. The UV rays from welding charge the batteries. you shouldn't need to charege it in the sun unless you use it a lot as a grinding shield.

[@smokinthem351]

@@terryjackson4538 Hi Terry it would just depend on the amount of welding and the time between welding jobs. So I don’t want to be a negative Nancy but hey what’s your point ?

[@terryjackson4538]

Both my workshop helmet that lives in a bag to keep it clean and the helmets at the local tafe that I have used over the years never get put out in the sun to charge. I can go weeks and even months without using my helmet and it's still charged. In 15 years I've never had one go flat. They don't actually need sunshine. I'm not being negative about putting your helmet in sunshine, just that it doesn't need it. On the same grounds though, leaving plastic in the sun will degrade the helmet itself.

[@mannycalavera121]

What's the actual spec/model of the hoist? What's the lift height? Building a shed, going a 5t hoist with 3.6m walls, 1.8m lift on the hoist.

[@sumosprojects]

Grouse Workshop 🇦🇺🍻👍

[@austinvert8626]

Great shed and setup Guys. Sadly, i live in Brisbane, and BCCouncil laws state that i cannot build any shed around your size, on my property(up to 10 sq metres allowed only). They state that any back or side wall of the shed must sit off the fence line around 6 metres, making it impossible to build any shed on a typical city suburban block. The crazy thing is that they are letting homeowners subdivide their blocks of land, and erect detached house dwellings that are built up to or on the fence line of that property. Go figure that one out! I'm assuming you got Council approval to build yours and everything turned out AOK. I enjoy your show, and keep up the good work. Greg.

[@scod3908]

10sq metres is often the limit for building a shed without a permit required (so people can build a little garden shed etc) Contact a shed builder and they should be able to advise.

[@Yernaritsbarry]

What state are you in ? I have been talking to draftsmen , builder certifiers , shed builders in Qld and because of my residential zoning and town planing they are all telling me its very difficult to go above 3.6m total height and beyond 56sqm floor space . Looks like a great setup and well thought out glad im not the only one thats not OCD about workshop setups

[@HackshopGarage]

We are in Victoria mate, the main concern for regulations in my area was not exceeding 3.0m height at the fence boundary, then the further from the boundary you are, the higher you can go, hence the shape of the shed

[@302esky]

Where did you get the power point plates that the power points sit on please and are they Plastic ? thank you and what are the measurements for the Lean too in your dirty shed ? My Garage is 14mts x 6.0 w x 2.8h and i was going to go out another 6 x 10mts to use as storage for all my stuff thanks

[@scod3908]

The outlet mounts are called purlmates :)

[@302esky]

@@scod3908 thank you I just finished installing those in my garage .I asked around a few wholesalers and got them .Thank you

[@hughmahony3161]

Severe OCD! Great episode!

[@DG_Raceway]

How's the floor coating holding up? I've got 5-7 weeks before the shed goes up, need info on floor coatings. Similar size shed + hoist going in... 🍻

[@scod3908]

I put trade grade grey epoxy down on mine, going strong so far: All Purpose Coatings (APC), EPO100T, 100% solids 2 pack epoxy

[@workingmansrestorations7071]

It sucks not being able to listen to music... I like listening to music when i work, but have to cut off when recording... So i just end up leaving off

[@charliepocock5013]

If you could only have one would you have a cold saw or band saw

[@petergill8819]

Beer fridge needs some stickers

[@mikeyerik459]

When are you guys putting the falcon on the dyno??

[@HackshopGarage]

We had it on.. and things didn’t quite go to plan, so we have had to do some repairs before it goes back on again

[@woodandmetalandstuffpauldo8561]

I turned a cam shaft into a backbone for a dog skeleton

[@GBLW]

What about the neighbours with the noise from the shed grinders etc... How far are you from the neighbours? That’s the problem that I have all the time I wish to make noise

[@HackshopGarage]

Yeah it is something that we need to consider, we do our best to be considerate, we make sure to not make any noise early in the morning as well as In the evening. I am lucky that I get along with my neighbours and they are very understanding haha

[@janeblogs324]

Is that roof cooldeck or just insulated?

[@HackshopGarage]

It’s just colorbond with 8mm insulation between that and the rafters

[@evan5l]

You didn’t mention the can crusher.

[@PaddyBoy644]

Well there you go 😂

[@damienhasleby8390]

Ripper shed ! Does Nathan buy anything or does he just use all your gear? We all need a mate with a shed like Michael :)

[@HackshopGarage]

Haha thanks mate, we do try and share the cost of buying tools and equipment these days.

[@MrGurinder75]

hi mate i get quoit from ELITE GRAGES today . same shed $51,526 . electrical pluming extra $8k to 10k , too expensive

[@letsdoit9547]

Great shed and set up, love all the vids. 2 Q’s When is the HQ coming back? And you mentioned you were previously a draftsman... what do you both do for work now? Other than KZbin

[@HackshopGarage]

Thanks mate, the HQ is coming back in January and we should have episodes out on it mid to late jan. As for what we do for work, myself (Michael) I am a firefighter and Nathan is a sign writer

[@letsdoit9547]

@@HackshopGarage Cheers for the reply Michael. Very diverse work you both have. Look forward to seeing the new episodes on the HQ. Keep up the great work, cheers mate

[@Madbart66]

What are the dimension of the big moveable bench you have?

[@HackshopGarage]

Hey mate, it’s 1800mm by 900mm and 850mm high

[@Madbart66]

@@HackshopGarage many thanks

[@jameskourgialis9050]

whatever happened to the wild voilet XY

[@aussiegeniusaffiliate]

Would you insulate the shed!

[@fulllifeadventures]

Awesome shop! Are you guys in the US?

[@HackshopGarage]

Thanks mate, we are in Australia mate

[@fulllifeadventures]

@@HackshopGarage right on! Keep it up!

[@Basement_CNC]

if you get something called kazien foam you can really organize your drawer and cut down on time searching for shit

[@tonymontana897]

What are the shed dimensions ???

[@Bigsoot7393]

Watch the video

[@AndrewMSS]

You weren't a draftsman Viking. You were a draftswizard!

[@HackshopGarage]

Hahaha I dunno about that Matho

[@STREETCARCULTURE]

👌🏽

[@Djscratchy350]

You didn't show all the marks in the concrete under the hoist from where Nathan keeps dropping shit 😂😂😂

[@HackshopGarage]

There is a small crater

[@Djscratchy350]

@@HackshopGarage 😂😂😂

[@Mechaniclyfe]

🤤🤤🤤

[@bigal878]

Who is Adam Savage mate? What’s his claim to fame? By the way, great shed and run down on it. 👍🏻

[@HackshopGarage]

Hey mate, Adam Savage is from mythbusters, he now has a KZbin channel called tested, for anyone that it is into shed organisation and tool tips, I highly recommend check it out. Thanks mate, great to hear

[@bigal878]

@@HackshopGarage ahhh now I get it. Didn’t know he had a channel. I haven’t watched Mythbusters for years lol.

[@markusberndkrause2858]

The couch is good for brain storming or have a beer or both.

[@99gmh72]

make the cam into a stool

[@lauchlanmenegon5916]

they make a really nice couple.

[@BonusChip]

You should hang some bead curtain thing in the doorway to the dirty section, make it like the backroom section of a Blockbuster/video store where all the R rated videos were kept

[@BonusChip]

Put up an adults only sign, a red light etc

[@micthegreasemonkey2918]

I know a girl that got fined for having ×1 milk crate how many hav u guys got ? Dont answer that !!!

[@HackshopGarage]

Haha can neither confirm or deny

[@janeblogs324]

I can issue you a fine, but you have no obligation to pay it

[@discostu7278]

Sweet setup just out of interest do you lads have wives/kids? I envy the shed time haha

[@HackshopGarage]

Hahah nah, no wives or kids.. hence the shed haha

[@discostu7278]

@@HackshopGarage living the dream 👍

[@liamwindsor5854]

They make a cute couple??!

[@pauljohns1016]

I love your videos but your laugh a lot which is good but sometimes it’s annoying regards Paul