Had to RE-THINK THIS ONE | Scaffolding On Your Own | DAY in The Life Of A Scaffolder

Рет қаралды 5,472

Күн бұрын

Had to rethink the back in this one to
Make sure the builder had the access he needed.
#scaffolding #building #bricklaying
Music Promoted by Music & Gene at KZbin:
/ musicgene
geniemindcreat......
Music by MBB | / mbbofficial
/ mbbmusic
/ mbb_music
Buy Music Licenses at www.mbb-music.com

Пікірлер

@Aaronistheman. 2 ай бұрын

Nice job 👍

@MrMurraymanson 2 ай бұрын

You are. A real SCAFFOLDER

@ironheed 2 ай бұрын

Gravlock coupler for beams/girders use them on rigs all the time underdeck for stringers to fix droppers to for hangers.

@SharkScaffold 2 ай бұрын

I call them beam clamps, but I didn’t have any with me.

@ironheed 2 ай бұрын

@SharkScaffold Aye same, I say gravlock or beam clamp. I even remember a time we used deadheads for the same purpose.

@tomcanham8724 2 ай бұрын

I just know them as a sk fitting lol

@MitchellRendell 2 ай бұрын

Yeah grav locks or sks lol

@Joey-rp5vg 2 ай бұрын

@@ironheed Yeah man the heavy duty square dead-heads. Some folk used a round/hook dead-head with a spigot jammed in but that's a bit dodgy.

@SkiwiAS 2 ай бұрын

cool trick with the double

@cheechU38K 2 ай бұрын

Diesel leak needs a good clean and inspection when running to see where it comes from. Could be on the injection side or tank lines. Garage would be expensive. Might just be a loose fitting. 🙏🏼

@SharkScaffold 2 ай бұрын

👍🏻

@MegaSnail123 2 ай бұрын

Who doesn't love a good head scratcher 🤣🤣

@SharkScaffold 2 ай бұрын

👍🏻

@SimonEtchells-r9s Күн бұрын

What about people in wheel chairs or push chairs accessing alley

@SharkScaffold Күн бұрын

plenty of space

@garyevans8116 2 ай бұрын

With regards to your truck. Is the fuel coming out when the engine is running. ? Because this happened to me and it was the fuel filter housing. I had a major fuel leak. But if you have major ones you must have minor ones. I hope this helps you.

@SharkScaffold 2 ай бұрын

👍🏻

@David31lol 2 ай бұрын

You’ve maybe caused a bit of damage form that job in the farms .. the uneven ground scraping on the underside of the engine 👍🏼 worth putting on ramps for further inspection before it gets any worse

@SharkScaffold 2 ай бұрын

I was thinking that👍🏻

@David31lol 2 ай бұрын

@ I have a Vauxhall combo which is pretty low to the ground it scrapes often, thankfully I bought it for peanuts and it’s not worth much, unlike yourself that pickup is your bread and butter 👍🏼

@MitchellRendell 2 ай бұрын

FairPlay mucka grafter.. you should invest in some easy fix though mate much easier and less gear specially on your own 🔧🔧 top grafter

@SharkScaffold 2 ай бұрын

👍🏻

@danvonranger 2 ай бұрын

Fuel line?

@michaelgreen6477 2 ай бұрын

Do you not use SK Girder clamps for the steel? Also how have you tied that in, apollos?

@Joey-rp5vg 2 ай бұрын

Steven Knight beam clamps.......banned long time ago!!!!!!!!!!!!!!

@mrgetthejobdone 2 ай бұрын

@@Joey-rp5vgwho said that lol

@Joey-rp5vg 2 ай бұрын

@@mrgetthejobdone Shell and BP offshore in the late 80's early 90's

@Nooneshereforever 2 ай бұрын

@@Joey-rp5vg use em all the time 🤔

@joshuaw8147 2 ай бұрын

@@Joey-rp5vgbeam Clamps aren’t banned offshore 😂

@tomcanham8724 2 ай бұрын

With the van it might be the injectors leaking. Does the van run abit lumpy on idle or not under load? Other than that might be a perished fuel line?

@SharkScaffold 2 ай бұрын

👍🏻

@tomcanham8724 2 ай бұрын

@SharkScaffold just have a look at the top of the injectors see if there's any fuel pooling up when it's running then you'll know if it's an injector issue

@SharkScaffold 2 ай бұрын

@tomcanham8724 👍🏻