Here I discuss a few points to note with a heavily worn 6139-6002.
Пікірлер: 44
@SpencerKleinVintageWatch8 жыл бұрын
HOW COOL to hear your voice, Adrian! I had no idea you had a channel. Fantastic. Subbed.
@hal0eight8 жыл бұрын
Thanks! You inspired me to actually do something with my hoard here.
@Dave.S.TT6007 жыл бұрын
Holy Cow..Spencer Klein knows this Guy. This is like .. Paul Newman and Robert Redford
@SpencerKleinVintageWatch7 жыл бұрын
We're friends and colleagues, and are together bringing back one of the most critical parts for the restoration of Seiko 6xxx-series watches. the lower mainspring arbor jewel, decades out of production.
@lozzom5 жыл бұрын
I’ve got an original with gold and black ring bought in the UK by me when I was a lot younger - been sitting in a drawer for years without me realising the history of the piece
@boydsargeant7496 Жыл бұрын
Thanks, very useful info!
@canonyeo42866 жыл бұрын
Beautiful watch. Hope to see a reissue soon. Great review. Thank you.
@philltaylor84429 ай бұрын
A proper POGUE. Says Meter 70 Resist at the 9 Oklok position. I've owned one since 19 71 and its till keeps good time . And my watch FACE or the DIAL HAVEN'T FADED AWAY .
@hubalahu4 жыл бұрын
"To get another one (ring) you probably have to scrap another watch" The Philippines: Hold my beer
@TFNv01976 жыл бұрын
Just purchased your gasket kit on ebay, hopefully my battered original 6139 gets better
@Onez_15 жыл бұрын
Good job some people bang on about nothing you dont, plus alot of experience and useful info shared. KUTGW
@gards47618 жыл бұрын
Just bought mine last week, it hasn't arrived yet. Sure I'll be in contact with you for a restoration.
@hal0eight8 жыл бұрын
Awesome! Look forward to hearing from you!
@gards47618 жыл бұрын
Looks like mine has gone missing while in the care of DHL! No hope of ever seeing it apparently. Pretty gutted.
@hal0eight8 жыл бұрын
Ah that sucks...surely it has a tracking number?
@gards47618 жыл бұрын
Yes it does. Package arrived in Sydney, opened and no contents. I'll get my money back, but still wanted the watch! Oh well.
@capecodcuda6 жыл бұрын
👍 enjoyed. watching ⌚
@jnrjnr777 жыл бұрын
Thanks for the vid, really helpful as I'm looking to purchase a Pogue soon. 👍
@justinacasuarina34194 жыл бұрын
I have one in excellent condition with a silver face / dial...you mentioned they only came in Gold or midnight blue though?
@rozinant12372 жыл бұрын
They most definitely came in the 3 face colors, blue, yellow and silver. I own one of each!
@richardsinclair94497 жыл бұрын
hello again I have a Seiko 6139 7010 how long would you expect from a full wind to this watch when it is on the sideboard as I'm getting 6 hours at night
@hal0eight7 жыл бұрын
They generally run between 32-40 hours. If you're getting less than that it's a sure sign the movement needs a service.
@richardsinclair94497 жыл бұрын
yes the watch needs a service the oscillating weight is a bit wobbly me thinks, as I have to wind it upside down don't know if it has bearings, thanks for your information mate, best of luck to you...
@gregb93895 жыл бұрын
The Seiko 6139 is NOT a manual wind. It is an automatic only. When you pick it up to 'wind' it, you are moving the rotor around but only enough to get 6 hours from it. They are from the Seiko 5 family and even to the present day they are nearly all manual wind only. Turning the watch crown will only cause the inner bezel to rotate. Regards.
@jonasvolcker89948 жыл бұрын
The lume part on these hands looks awfully thin. Are these the original (hour/minute) hands?
@hal0eight8 жыл бұрын
Yeah they are original but the lume has fallen off and is moldy. A re-lume should see it good again.
@Claude11002 жыл бұрын
Thank you , but Are you going to say anything about the date ring ?? It looks Chinese. .
@hal0eight2 жыл бұрын
It's original just extremely faded.
@KeithCanisius4 жыл бұрын
Is it to bad if the ring turned White? Found a complet original one close by. Looks pretty fine, but the lost its yellow color..
@hal0eight4 жыл бұрын
The rings are prone to uv damage as they didn't use bromine or anything in the nylon at the time. It's not bad but it's ugly. There are now some amazing repro parts from a us seller on eBay
@KeithCanisius4 жыл бұрын
@@hal0eightThanks for your reply! is it expensive to replace?
@hal0eight4 жыл бұрын
@@KeithCanisius I think the good ones from Seikosis on ebay are about 80US
@KeithCanisius4 жыл бұрын
@@hal0eight thanks! Can I send you an Email about another watch Im looking at?
@hal0eight4 жыл бұрын
@@KeithCanisius Of course.
@richardsinclair94497 жыл бұрын
oh yes hands are all true and correct
@richardsinclair94498 жыл бұрын
but it is good for scrap and has a good dial important part
@hal0eight8 жыл бұрын
The dial and the rotating ring are THe key ingredients for a good rebuild with these watches. After that, the correct sweep hand (it is hard to find and very difficult to replace) and a working stem assembly, although these have been fairly easy to find lately.
@richardsinclair94497 жыл бұрын
I would safely say that the works would be good for scrap parts as someone has been in it, don't know what else they have done, did you get it from India as they are always messing watches up, wish they would leave them alone... The case is shot, the bezels are scrap, the case is shot don't think that would be rescued job... the rear case cover is a good one if you find a salesman's case... I'm looking for a good pogue at the moment, so thanks for your help in the vid, I found an early starburst pogue speed timer, it was in great nick, but did not want to pay the asking price off 1300 pounds as I did not think it worth it...
@richardsinclair94497 жыл бұрын
the crown is sticking out
@mohdnoorazmanyahya17906 жыл бұрын
The day is in Kanji, as I know only JDM version you will have kanji day
@hal0eight6 жыл бұрын
It's quite likely it was a JDM release. We've also seen them with Kanji days purchased from military PX facilities, e.g. Guam, Philippines, Okinawa etc. The 6306 is a good example of that.
@richardsinclair94497 жыл бұрын
it's not the right balance period
@hal0eight7 жыл бұрын
It is the correct balance, but someone's hit it with some flame or something that has discoloured the brass. After cleaning in one-dip solution and some strategic rodico, surprisingly, it ran really well, amplitudes in the 230's.