Easily shortening our S10 chassis to fit our 38 International pickup.

[@robertbennett9243]

A lot of skilled progress this time. Pablo and Buddy were definitely ready to go in the house.

[@plumbcrazy375]

I love watching you work but I can't justify buying a Lazer welder or lazer rust remover watching how easy they are makes me think about it but hobby for me

[@blahblah4125]

When I watched you connect the frame so expertly and easily, I was like OKAY, now he is just showing off lol. As you should, you have expert fabrication skills. Great job! Well done sir!

[@randybecker8146]

That new welder is an amazing thing! The operator is too.

[@bruceaskin9645]

Yep I would love to have one. I now have heat buckle to deal with , because I'm too impatient to do the full mig tacking routine.

[@stephencarr2216]

I love watching you make a car or truck out of what most people would call scrap, It’s amazing how much you can do, Is there nothing you can’t do, Brent you are so very talented at everything you do, This is my favourite channel by far, Thank you for what you do and for being such a nice guy 👍👍

[@MikeLutz-e8p]

"I JUST LIKE TO BUILDING STUFF"...AND WE JUST LOVE WATCHING IT!! KEEP UP THE GREAT WORK.

[@outintheboondocks1466]

After seeing you help Rich at Deboss, I'm really hoping you get a ton more followers. You're a master at fender bashing, and pretty much everything hot rod!

[@RandyH-qf3dc]

Enjoyed this one very much. You make the impossible, possible and the difficult look easy. That truck is really coming along. Really impressed also with Austin's patch work. He has learned a lot from this project. Very cool. Gotta keep passing hot rodding knowledge down to the new generation. I love that part of the show.

[@GaryBertrand-p8m]

The title of your channel is Halfass Kustoms but there is nothing half ass about your work great job.

[@kenstevens5675]

You are quite the “imagineer” sir. Can’t wait for the next video.

[@EasyThereBigFella]

I like Austin's mindset on the Buick, to have it "Function and work".

[@ronaldzeoli7528]

Your projects are always on adventure. Really enjoy watching them

[@NewWhirledSlacker42]

@ 37:33 that totally did it for me. that was so clean. Marvelous job!

[@billtopka2584]

You make everything look so easy! I remember when you first got the rust remover you said that you’ll probably never use the laser welder. Now it seems it’s a regular part of your rebuild’s. 👍😎

[@snoopu2601]

Brent got the hang how to use it. The more he uses it the better he is getting the hang of it

[@timothymerritt620]

The cornbinder's shaping up great job Brent

[@stephengorham2195]

Wow! You're progressing quickly can't wait to see the body parts back on.

[@terryeustice5399]

Brent great job on shorting the frame. Great video. Appreciate you. 💯👍💕

[@ghouliesgarage3922]

Wow seems like you made major progress this round .. can't wait to see the bed dropped and how it looks .. Great song choice Brent ! Thanks !

[@davidhatch2558]

Excellent job on shortening the frame. Thanks Brent for the video

[@LamontStorm-b5b]

I love the way ur training those boys to do that

[@alanpaulick7815]

You are awesome Brent you are getting things sorted now. This will be a great run about track. Take care.

[@jayden4656]

Never get tired watching your skills and talent

[@whittlerdave1440]

Well I'm glad I seen this because I never did know you could shorten a frame like that on an S10 that really helps out a lot of people knowing that awesome truck

[@BobFurman]

Another great video! I enjoy watching how you push yourself to learn the laser welder and the planishing hammer.

[@bruceaskin9645]

Whilst its great to have family and friends around , you always breathe a sigh of relief hen the are all gone, and you can just do your own thing .

[@shanewright6958]

Another great video. It’s coming along nicely 👍👍

[@hooligan_56labelle22]

Austin's buick is coming along nicely. I remember painting old cars like that in the hot sun with a 4 inch roller and looking quite well lol. The good old days

[@eddiedebeer1709]

That chassis came out beautiful Brett 🇿🇦

[@jimcoplan9502]

Good lesson Brent.

[@murrayandru7527]

Great Job Brent ...Looks Fine ..

[@AlanPitt-y3n]

Beautiful work 👍🏼

[@ScottDouglas-r1h]

After watching a bit I'm convinced the lazer is the way to go for welding sheet metal.

[@DennisMurphey]

Very slick, that frame seems pretty easy to modify as a donor. Great Job, Thank You, D

[@donniejoemoore600]

You do more in a week than these other custom car channels do in half a year.

[@blackbuttecruizr]

Hey Brent! Appreciate your content!!!

[@johnkranz4004]

Coming along nicely with the chassis And fenders Brent

[@vicmabus1532]

Some 1939 Plymouth headlights would be really cool on the International!

[@WingmanJohnny]

Fantastic work. Love watching your work. Keep up the great work.

[@TrendsbySterling]

Slick way to shorten a frame Brent!

[@jrlittle2]

I had no idea it was so easy to shorten an S10 frame. Looks like everything is going together nicely.

[@davegallucci9327]

Brent you make it look easy. I enjoy your videos, gives me idea's!😊

[@henryallisonsr8318]

Just want to say hi to everyone and hope you are having good weather and Ian keep up the good work God bless and have a blessed evening and

[@peterouellette3874]

I like the forward move. Nice going, Brent

[@SteveMuncaster-ji9dw]

Brilliant video 👍👍THANK YOU I wish I could weld like that

[@GerryMiller-y4d]

Fenders came out great

[@larrydeforrest5744]

Fun to watch the progress.

[@garyb.4080]

You’re really getting way more comfortable with the laser welder, looks like a lot less grinding!

[@rickyball6707]

You always make the hard look easy. I don’t know how you do it. Another step closer on the truck great video thanks a lot.😉😉😉😉

[@tonyegan4651]

Loved this one Brent, sharp plan quick explanation and great demonstration of how it's done, Thanks mate 😅, Tony Brisbane 🇦🇺🦘🦘🦘

[@tonyegan4651]

Ps, I used to build and modify drive shafts for trucks buses and cars. I don't think you will need that centre bearing mount with the shaft that length. If you can safely do without those things it is a plus and less stuff the wear out.

[@lynnlubben8750]

Keep 'm com'n . Great stuff!

[@fonhollohan2908]

Fenders don't look that bad, they do match the Truck! lol BTW that little laser welder is one handy machine! Cheers Brent, see ya on the next one.

[@Matthew-x9d]

Another fun build to watch. Thanks for sharing.

[@pdrphil8159]

I bought a 1986 square body S-10 to do an LS swap.. I bought it from an old man 15 yrs ago and it has a 2.8 ltr V6 , 5 speed with only 54k miles on it . Its an extended cab , which is what I wanted because I think they look cool. I kinda hate to pull it apart because it runs & drives perfect & other than sunburned paint the body is flawless... But the 2.8 is gutless & I want want some zip ... But I'm gonna drop the 5.3 in it & clear coat the patina .. Next wk the cab & bed comes off & the swap begins...

[@mikedavis3841]

You're very entertaining Brent I totally enjoy your videos 👍

[@christophergreen2328]

Just not long finished the tilt c10 frontend with deboss garage. Double dose of halfass kustoms not bad for a boring snowy Saturday

[@bass60guy]

Looks like you had a full shop during this video!!

[@billterry9996]

I'm liking the Frankenstein look of those patches

[@JamesDavis-to1hn]

Great job Brent!

[@TomBinert]

Hi Brent spray the inside of the fenders with under coating to keep them from rusting anymore

[@robertmills4055]

So much talent looking great keep it up love your page 👍

[@AndrewHCann]

Excellent Video Brent :) also kids projects to and doing well on looking good !

[@user-lj1hi4xh6o]

Brent, well done sir.

[@tsirron]

cool trick!

[@rondunlap4628]

nice job on the frame now i know how to do it ty

[@glennnickerson8438]

Your laser rust remover is going to get a workout on this one Brent!😆

[@tugmountianroadcampers5582]

Lookin` good Brent!

[@ronaldschmuck3901]

Coming together very cool 😎Brent.

[@morgansword]

Looks as tho the welder side of the lazer rust remover is the star of the show.. who knew

[@jman6030]

Love how that master was just bobbing around lol

[@guitarsbyatomixcustomguita2789]

Halfassteins monster!

[@Jools-j2l]

Keep picking away at stuff, youll get there eventually!

[@kyleforeman4543]

Seen u do S10 frames In ur other video,who would of thought that they GM made it simple.lol

[@RebeccaGriffin-b8n]

Brent's version of "PATCHES" 😂😂😂😂😂😂

[@James-r8y4o]

Getting close

[@vikingfather1]

Nice “massaging” hammer!

[@stevem3413]

I like watching you play and build these different projects always interesting to see how you can make things fit and just work do you ever sell them in the states

[@surindersandhi3924]

Hi My Dear Friend Very Very Great Job Sir ❤❤❤❤❤

[@launceherron]

Awesome 👌

[@willwade1101]

Looks like the fender on the drivers side angles out at the top compared to the passengers side.

[@stevensilver1014]

love your toys

[@richardhill4862]

Nice!

[@edwinthompson6510]

every time the international front assembly comes into view i think of the movie Duel,,,,,dennis Hopper

[@williamenglish4398]

I love the lazer welder.You seem to be using it a lot more now.Would you recommend that unit?

[@ronaldolweiler7745]

I wish you would finish the Studebaker gasser .

[@joeslash77]

Turn & Squint, LOL! Used it for 40yrs along with little or no hearing protection. I explains why I'm almost deaf and can't see anything closer than 3 feet. That aside, nice job on the fenders. What's the plan for the rear suspension? I liked the Studebaker project and curious to know where you plan on going with it. Gary

[@steveemmons944]

Make the doors suicde stile you can then make the fenders as long as you want.

[@Scott-su1wj]

Nice

[@casualobserver3702]

Hi, watch all your shows. Can you explain the welder you are using in the fender work?

[@BenSymington]

[@GerryMiller-y4d]

You’re too cool Brent

[@williamcummings6562]

Next time you see Karl he can give you some lessons!

[@fuddwacker4803]

Brent wouldn’t relief cuts work on that metal piece?

[@Six4691]

So I take it you’re not going to do bodywork and paint vehicle? I’d like to see you do another semi restoration job if you get the chance.

[@nicoverduin]

Brent....I have a question about the brake lines....why is the line curved down from the master cylinder?...greets from Nico

[@richardabernathy6242]

I notice all you ratrod guys use the patented safety turn and squint welding. Lol

[@NZMOPAR]

Yep handy for tacking shit together

[@ghouliesgarage3922]

Yeah my eyes hurt just watching lol ! I'd call this a Patina build.. rat rod is like 15 different pieces of random stuff thrown together . With the obligatory skull hand mirrors made outta motorcycle chain ...

[@davidbrumfield158]

I saw it was almost 11:00pm on the clock how much sleep do you get?

[@Wrenchen-with-Darren]

Well, keep building stuff.😂

[@johndonaldson9321]

Are you going to clean the frame up.

[@richardabernathy6242]

I see people in the background. How often do you have to scald the younguns about putting tools back. Lol

[@1208bug]

😊👍

[@bigbill709]

That frame has a lot of scale rust ?