Thank you for your demonstration and fix on this QRP antenna tuner. I replaced both wires using 18-22 guage dc wire each color coded black and red. Works ok now! Thanks a million and thanks for you tube for having these videos online!. Paul from South Florida!! 73's N4UUQ.
@MakeDoAndMend118 сағат бұрын
@@bladerunner5680 Thanks for watching. Cheers from old George and Jane in the UK 🇬🇧
@stephenpadley66843 ай бұрын
When you connect a wire to the antenna & counter poise, use 6mm or more earth bond wire, the difference is on recieve/ speaker wire signal 6 / earthbond wire signal 9+++
@MakeDoAndMend12 ай бұрын
Thanks for info. I don't have any larger wire to try. But I will try it one day if I can get wire without spending too much money. George
@KL3NCH2 ай бұрын
Thanks very much for showing us what's "under the hood". Google images draws a blank. 73.
@garylanders14705 ай бұрын
Nice repair George!
@Tamlin736 ай бұрын
Hi there, i own 2 of them trancivers, and i did get an antenna like that for them, its just another brand, same antenna, with original internal battery i have tune this antenne on 20 meter now, 1.0 in swr and about 8 watts out, i think its cool stuff, cheap and it works some how :) Best regards from Norway
@MakeDoAndMend16 ай бұрын
Many thanks for watching. These radios are good value for money. Despite some small issues. I find them ideal for portable outside low power operation. Normally I only use 20m and 40m and have settings in radio just for those bands. Happy adventure in radio. Cheers from old George. 🤠
@Tamlin736 ай бұрын
@@MakeDoAndMend1 I got them for the CW decode and learning mode :) its genius.
@kulimaszos4 ай бұрын
hi, I didnt get the dial. What does the numbers mean? If i want to use on 27.555 MHZ, where to rotate? Thanks
@MakeDoAndMend14 ай бұрын
I think you turn the knobs to best results. Then write them down on a piece of paper. So the next time you use it on whatever freq you first used it on. You turn the knob to whatever you written down and it is a way of remembering the best results. George
@luigiverdicchio67947 ай бұрын
May I ask how you rewired it? I can't see very clearly in your video. mine is literally different than what is shown in your video. The bottom of the box is black and the two wires are also black, I can't understand which ones are soldered to the central one and the ground. Thanks in advance
@MakeDoAndMend17 ай бұрын
I have just produced a short video showing the wiring. It will be uploaded in a few moments. 2nd March 2024 around 1pm UK time. George
@mattbw-G5MAT5 ай бұрын
Thanks for taking time to make this. They seem quite low quality and a few weird design choices. The fact you had to fix it to make it work. I will stick with my wonder wand and this has convinced me it was a good buy.
@MakeDoAndMend15 ай бұрын
Thanks for watching. Cheers from G1BKI Mick (George)
@Bikesdavebikes8 ай бұрын
Thanks for this info, very helpful.
@corsavic15 ай бұрын
Thank you though mine was broke same problem just took it apart your a life saver thanks for taking the time