Overview of the H.15, H.15D and the Micromotor Hammer Handpiece H.MH.110 with Melissa Muir
Пікірлер: 35
@flyingmonkeys97743 жыл бұрын
I just got a MM hammer handpiece so I needed to see this. Many thanks.
@tamaraadams93173 жыл бұрын
You must have read my mind, Melissa! I was just thinking about this very topic! Thank you so much for posting this video. It really helped me decide! :-)
@olegpetelevitch44432 жыл бұрын
Just got mine ! Cool Stuff thank you !
@isabelrowan6776 Жыл бұрын
Great demo! Please share how to alter the setting tips as in the 60 % radius alteration you used when setting the stone. Also which tip are you using to burnish out the edges of the flared rivets? Thank you so much!
@angelfranco58093 жыл бұрын
Do you know if you can use the foredom tx model with the hammer piece??
@RISHABH6454 Жыл бұрын
Can we set fragile gemstone like Emerald, Selenite etc with hammer setting machine, are these machine work on motor or air compressor?
@lars_of_the_north Жыл бұрын
well, that was just added to my Amazon cart
@whitelfner45822 ай бұрын
When did the H.15 add an oiling hole near the front? I read in my 'S' Manual that it needed to be taken apart every 100 hours or so and lubricated. I don't think mine is a fake, I bought it from a retired craftsman, he said it's 25-30 years old. He also said it might be a earlier hammer handpiece. Showed a pic with a #14 handpiece which looks very similar.
@ForedomElectricCo2 ай бұрын
Hello, Can you take a picture and send it to Mike Z here at Foredom? mzagielski@blackstoneind.com He is the expert and can help you identify. Thank you!
@theOdin-odin Жыл бұрын
At 4:00 you hammer the texture into the metal. I have a flat disc of silver am doing this as well however it is doming/deforming. It is extremely important that it doesnt dome. What can i do to avoid doming? Its 19 gauge and i cant use any thicker.
@TheSilverSmithsBench1 Жыл бұрын
I just got the H.15D and the multi point set (AK101). Reviews for the handpiece ask for instruction on Rio Grande.
@racket136 Жыл бұрын
I have ordered the pave point and polished it (using green rogue, as per your other video) yet I am not getting the texture that you are getting. It's not as deep and not polished as yours is. Could you explain what I could be doing wrong?
@davidheskett17662 жыл бұрын
Melissa, have you tried the hammer on stone? I'm looking for a tool that will give a hammered or 'pecked' finish on stone. David
@dokterac68803 жыл бұрын
I like it...
@stephencoster95322 жыл бұрын
Hiya, we can see at 5:56 what you mean about not bending beyond the recommended angle, here you must have it bent to 90 deg, well beyond the recommended angle. Will they give you a new one when you break this one? Stay safe, Steve...
@aquarius99002 жыл бұрын
can this be used in place of a graver max air hand piece with a sharp engraving chisel ? or no
@kathybradbury2 жыл бұрын
Foredoom does have a graver kit (I just got one from contenti) it’s a flex shaft motor with a specialized hand piece similar to the hammer hand pieces Melissa showed, but it uses a collet to accept various sized gravers and tools.
@andyvan56923 жыл бұрын
ironic, NOT following your own advise?? (at 5:52 you use the spring version, but it is bent @ approx 90 deg., NOT the 30deg. limit you say earlier on in the video).
@audreyh66282 жыл бұрын
I noticed that too! I don't see how its realistic to not work with a 90deg at least some of the time
@texasgigi36842 жыл бұрын
I bought the Foredom H.15 hammer. Now, I’m having a LOT of trouble trying to find a flex shaft that it’s compatible with. Is this only compatible with other Foredom flex shafts? I realllly need this tool! Help!! I went to Harbor Freight and to Lowe’s and they both told me that they didn’t have anything compatible with it.
@ForedomElectricCo2 жыл бұрын
HI. Sorry you are having trouble. The H.15 is compatible with standard key tip shafting with industrial grade flex shafts.
@luisxander26219 ай бұрын
😊
@baqergt50622 жыл бұрын
When I press the handpiece it stops kicking is this broken or normal ?
@ForedomElectricCo2 жыл бұрын
Hi! Please reach out to customer service for trouble shooting. customerservice@blackstoneind.com
@t2kgames8683 жыл бұрын
Can i decorated name with this
@12mygirls8 ай бұрын
What bit are you using for the prongs on the two stones?
@ForedomElectricCo8 ай бұрын
It looks like Melissa is using the HP10175 cylinder anvil point that she modified and polished. Thanks for reaching out!
@12mygirls8 ай бұрын
@@ForedomElectricCo thank you!
@ranalala512816 күн бұрын
5:46 braking her own rule
@enriquecoria962 Жыл бұрын
Ok now can you show how to fix them when they break 😢..
@GailHodder2 ай бұрын
I have a broken one. Am searching for repair. Did you figure out how to repair yours? Thx
@nagasaiprakasht60197 ай бұрын
How much it costs?
@ForedomElectricCo7 ай бұрын
Thank you so much for reaching out to us. Please call 800-272-2885 or email us at: customerservice@blackstoneind.com for help.