Hammer Impact Breaker Bar DIY BUILD

  Рет қаралды 42,860

sixtyfiveford

sixtyfiveford

3 ай бұрын

Impact leverage in tight spots.
Stuff I used in the video:
Dewalt 20v portable bandsaw: amzn.to/3IGXSJc
Makita 18v Angle Grinder: amzn.to/43kdLyM
Milwaukee 12v Die Grinder: amzn.to/3Vjoasw
Lincoln Viking Auto Darken Welding Helmet: amzn.to/3IH0EhI
Leather welding apron: amzn.to/3TFx2Y8
Related Videos I mention:
Spinning paint can shaker: • EASIEST Spray Paint Ca...
Wrench leverage bar: • Wrench Extender levera...
Green GE shop heater: • Shop HEATER from old O...
After Thoughts about the Video: Works fantastic. The length of the stubby arm plays hugely into the force/leverage you can apply. However too long and it starts flexing and getting into the way. I settled on 3" from center of bolt to center of 1/2" socket. I just need to build a 3/8" version.
SUPPORT THE CHANNEL or support the SHOP DOG's treat addiction:
Buy Ginger a new bone: www.paypal.com/donate/?hosted...
sixtyfiveford
sixtyfiveford/
Ginger Birthday wish list www.amazon.com/registries/bir...
snapon snap on pittsburg tools craftsman matco mac great britian great neck allied tap die pittsburgh harbor freight too truck kobalt home depot lowes 65 Ford 65Ford SFF

Пікірлер: 296
@Ken_in_Wisconsin
@Ken_in_Wisconsin 3 ай бұрын
I am 60 seconds into this video, and I yelled out "Wow this is a great idea!!".
@NickDangerThirdGuy
@NickDangerThirdGuy 3 ай бұрын
I saw the thumbnail and said the same thing.
@markmaherr
@markmaherr 3 ай бұрын
I posted a similar "I'm 20 seconds in " and then once I posted I read yours. We all need to go weld one up
@a8f235
@a8f235 3 ай бұрын
I'm 2:00 in and I was like, man I need a dog 😆
@Zebrahead6000
@Zebrahead6000 3 ай бұрын
You'd be the funnest neighbor on earth!
@joshuasims7357
@joshuasims7357 3 ай бұрын
he would hate me cause id be over his house all the time lol
@huninmunin1732
@huninmunin1732 3 ай бұрын
Nah, I would love to live near him like 20 houses away but directly beside him working on his stuff all the time no, thanks. I would love to be his friend and hang out, work on stupid stuff but not every day and all the time.
@ThatJerkFromCali
@ThatJerkFromCali 3 ай бұрын
@@huninmunin1732 Yeah you gotta be a real man for that. It's like a white noise machine for men
@huninmunin1732
@huninmunin1732 3 ай бұрын
@@ThatJerkFromCaligotta be a real man not everything is about you, I would love to run a power hammer in my garage, but I have a family....
@ThatJerkFromCali
@ThatJerkFromCali 3 ай бұрын
@@huninmunin1732 I have a family as well but mine understand how a man should be I don't use soy in my coffee
@hmac2476
@hmac2476 3 ай бұрын
I have never been disappointed by clicking on your tutorials. Great job, thank you for sharing!
@tankerboysabot
@tankerboysabot 3 ай бұрын
Ole Uncle SixtyFive keeping up the good fight for innovation!!!
@styverdyver
@styverdyver 3 ай бұрын
I simply have to get a welder! So many activities I could do from all of your ideas!
@sixtyfiveford
@sixtyfiveford 3 ай бұрын
If you get one the projects never end. Sometimes stuff just breaks for fun so you can weld it...
@Rein_Ciarfella
@Rein_Ciarfella 3 ай бұрын
@@sixtyfiveford 😂👍
@jaredlancaster4137
@jaredlancaster4137 3 ай бұрын
You really do need a welder. My harbor freight welder is the best $170 I have ever spent.
@Patriottoo2
@Patriottoo2 3 ай бұрын
You're not, really, living, until you start welding. Opens sooo many vistas for projects.
@harleco1
@harleco1 3 ай бұрын
You should put a patent on that
@Ken_in_Wisconsin
@Ken_in_Wisconsin 3 ай бұрын
Don't worry. Somebody else will now.
@Iowa599
@Iowa599 3 ай бұрын
I'm sure I have seen something similar.
@Berglecutt
@Berglecutt 3 ай бұрын
Snap-on sells hand impact wrenches under blue point.
@simonilett998
@simonilett998 3 ай бұрын
I have a very similar tool to the Toledo, T+E, Laser Tools versions, I bought it pretty cheap many years ago on ebay. 2ft long 1/2inch drive. Only real difference is the black square drive head doesn't pivot, it's fixed 90° to the handle/hinged part👍
@simonilett998
@simonilett998 3 ай бұрын
@@philmickey7247 This style tool has been around for years, I'm sure they would've come out with their own version by now, if they haven't already🤣
@dmalott0908
@dmalott0908 3 ай бұрын
Everytime I watch your channel I learn so freaking much! This is just awesome!
@sixtyfiveford
@sixtyfiveford 3 ай бұрын
Glad you enjoy it!
@alanross3435
@alanross3435 3 ай бұрын
You are extremely intelligent my friend!
@jeffreystroman2811
@jeffreystroman2811 3 ай бұрын
I can admit it, other people can have good ideas too, not often but it can happen
@laumuseka
@laumuseka 3 ай бұрын
I swear you are smarter than 99% of actual engineers. And I wouldn’t be surprised if a part of that is because you’ve had to outsmart them to fix things as well as you do. This is a genuinely genius idea!
@christopherchampigny6586
@christopherchampigny6586 3 ай бұрын
I’ve said it before this guy is a genius! Great video.
@tecc8380
@tecc8380 3 ай бұрын
Can't count how many times I could have used that. Woodworker for 25 years but I think I could pull that off with my brother helping me weld. Which I need to learn anyway. Thanks for your time showing us some skilled work.
@rsage_
@rsage_ 2 ай бұрын
Man, that's one of those tools that you put in the back of the box and don't use until you need it and it saves the day...and your knuckles. Awesome work! ... about to drop my rebuilt engine/trans/tcase on the Defender. Fingers crossed it works out, haha.
@sixtyfiveford
@sixtyfiveford 2 ай бұрын
That's going to be fun to have it back together.
@briancalvey4997
@briancalvey4997 3 ай бұрын
Love the low-key style of your videos. And always interesting.
@ThacMan
@ThacMan 3 ай бұрын
I love this dog, he's a freakin genius but, his puppy steals the show every time.
@charlesboston1
@charlesboston1 3 ай бұрын
as always , love the heeler content :D .... this is freaking brilliant ..... i'm a millwright , and i am now realizing "why haven't i run across this idea yet" .
@shonuffisthemaster
@shonuffisthemaster 3 ай бұрын
you never cease to amaze me with your genius garage inventions!
@BADD400
@BADD400 3 ай бұрын
Great tool.
@sixtyfiveford
@sixtyfiveford 3 ай бұрын
Thanks, I'm glad you liked it
@dominictarrsailing
@dominictarrsailing 3 ай бұрын
I only saw the thumbnail and already wanted one!
@joels7605
@joels7605 3 ай бұрын
This is brilliant. I'm going to make this, but with a threaded end so I can attach my slide hammer. That'll let me go in the opposite direction. Well done, sir. Thank you.
@sixtyfiveford
@sixtyfiveford 3 ай бұрын
Sounds great!
@markmaherr
@markmaherr 3 ай бұрын
I am 20 seconds in and already planning on welding one up
@frankhaydon658
@frankhaydon658 Ай бұрын
stop by my forge and add a different dimention to your creativity, love the way your mind works
@Rein_Ciarfella
@Rein_Ciarfella 3 ай бұрын
Someone else here mentioned your paint can shaker video and I just remembered some things I did to augment that when I fabricated my own. I used lids of various sizes, cut off cans with a safety can opener so there were no sharp edges. Used multiples of those to beef up the attachment to the central bolt instead of washers because the additional lids distribute the force over a larger area. I drilled a hole in one of my overhead beams to screw it into the beam so it’s always right there overhead next to my bench. I also use multiple sections of scrap rubber membrane roofing to wrap around various spray cans to secure them inside the shaker so I can invert it if I feel the need. I’ve found that being able to hold the can in a vertical, horizontal or inverted orientation helps to get the shaker ball inside to act upon more of the contents. I’m currently working on other iterations of this tool utilizing smaller cans to accommodate paint pens, which also require vigorous shaking before use.
@zlindauer5315
@zlindauer5315 3 ай бұрын
And all this time, i thought fine threads were stronger because of more surface area! Coler me embarrassed! Thank you, Mr 65ford!!
@alancummings5008
@alancummings5008 3 ай бұрын
Great Tool! So many times I could have used this. Years ago had a combine that had lots of bearing issues, in very hard to reach spots. This tool would have been perfect
@Hammerback972
@Hammerback972 3 ай бұрын
Its another tool i never knew i needed, but certainly could have many uses for it, but have the fabrication skills of a rock. I've always had to improvise and find unconventional ways to get that nut off.
@iamnoone.
@iamnoone. 3 ай бұрын
That's the best idea of this century so far 🎉
@walterhaumaier9137
@walterhaumaier9137 3 ай бұрын
That is freaking genius
@MetallicAH2O
@MetallicAH2O 3 ай бұрын
Nice!! We had something similar at work that had interchangeable wrench ends instead of the breaker bar side to remove fan hubs. You could also use either a hammer or an air hammer to impact the other end. I think the breaker bar end makes it waaay more useful!
@CleanCutLawnsK2
@CleanCutLawnsK2 3 ай бұрын
You, sir, are a genius.
@jcataclisma
@jcataclisma 3 ай бұрын
Hadn't imagined it yet. I didn't know it. I didn't wanna. Now I need it. Dang it!
@rob45x
@rob45x 3 ай бұрын
I've had one of these tools for about 10 years now. Mass produced. Look up Toledo power bar.
@ThriftyToolShed
@ThriftyToolShed 3 ай бұрын
Excellent idea! That will be very handy to have around for sure!
@tomjeffersonwasright2288
@tomjeffersonwasright2288 3 ай бұрын
Good idea. From the thumbnail, I thought you were putting a slide hammer on the shaft, like a dent puller. Your build has the option for bigger hammers, is better.
@sparkyjerred419
@sparkyjerred419 3 ай бұрын
My heeler doesn't like to hang out in the garage with me, think she doesn't like the noise. Cool tool.
@sixtyfiveford
@sixtyfiveford 3 ай бұрын
Awesome dogs with tons of personality
@evanfrucht
@evanfrucht 3 ай бұрын
They are the best ​@@sixtyfiveford
@charlesboston1
@charlesboston1 3 ай бұрын
i have a special chair ( a leather front seat our of a 2001 dodge ram ) for my heeler and a screen to shield her from welding flash .... but when things do get loud , she leaves and sits outside the shop until it is less noisy
@stephenanderson439
@stephenanderson439 3 ай бұрын
Laser Tools Hand Impact Wrench 1/2"D 4590
@murraymadness4674
@murraymadness4674 3 ай бұрын
Great idea. Sometimes you need it and the alternative is taking a bunch of stuff off to get enough leverage. btw, your lack of gloves scares me, we don't want you to get hurt.
@duckflymcgoo
@duckflymcgoo 3 ай бұрын
This is gold.
@jimmulone2422
@jimmulone2422 3 ай бұрын
There is a tool already available (or it was years ago) I bought one it was marketed for breaking free crank bolts especially on FWD Hondas. I can’t remember who made it but I think it was Lisle or some “off” brand Any still a great idea and I can appreciate the effort in making the tool and then video. Thank you
@rickhammar1636
@rickhammar1636 3 ай бұрын
Private brand tools 1/2" power bar. It's still available
@ShadowOfADaemon
@ShadowOfADaemon 3 ай бұрын
Great idea. Had a simulare idea i've been using for years, hit the end of the powerbar/ratchet with a soft face hammer or small deadblow. No sparks/metal flakes/sharp edges left on tooing/ lower noise impulse
@ShadowOfADaemon
@ShadowOfADaemon 3 ай бұрын
might be usful if you are looking to design a product to incorperate something link Mastercraft Breaker Bar With Ratchet Head. It would allow you to have a fast reset from realy stuck bolts or nuts
@skyscraper37
@skyscraper37 3 ай бұрын
Genius…and I second the patent
@lewerim
@lewerim 3 ай бұрын
I love that dog...
@bobbylibertini
@bobbylibertini 3 ай бұрын
Why are these not commercially available?!!!!! Genius idea! [Sam Kinison voice] Oh..OH...OHHhh!!!!!!!! (Like another commenter said, I have got to get a welder!)
@littlepaddy7444
@littlepaddy7444 3 ай бұрын
Interesting concept, good work. Thanks
@davidgridley3643
@davidgridley3643 3 ай бұрын
Very cool. I made one of your spray paint shakers, love it work great. Thank you
@Wil_Liam1
@Wil_Liam1 3 ай бұрын
I found out a long time ago that frozen,or stuck bolts and nuts often came loose when hammering on the tool right where it wraps around the fastener.. Apparently the impact or shocking helped to jar it loose like an impact does.. Another great idea there Moe !
@sixtyfiveford
@sixtyfiveford 3 ай бұрын
Thanks
@mudgyver5205
@mudgyver5205 3 ай бұрын
If it loosens really tight bolts then you have created magic. As always thanks for sharing.
@YummyFood-ov7bg
@YummyFood-ov7bg 2 ай бұрын
반갑습니다 자주올께요~🥰❤❤❤❤❤👍👍👍👍👍
@Tubeagrutis
@Tubeagrutis 3 ай бұрын
Love it! Gonna make one.
@HFG
@HFG 3 ай бұрын
That's pretty awesome
@jiujitsuforall8627
@jiujitsuforall8627 3 ай бұрын
Just love your ingenuity and creativity. Your dog is awesome!
@nmartin5551
@nmartin5551 3 ай бұрын
I cannot wait to use some of your great ideas!!
@sixtyfiveford
@sixtyfiveford 3 ай бұрын
Glad you like them!
@mikejones5358
@mikejones5358 3 ай бұрын
That’s too cool now I have to build one
@Morrisonspouch
@Morrisonspouch 3 ай бұрын
Bought one ages ago, used to borrow open from another mechanic. Great tool, well known and available lots of places,
@sixtyfiveford
@sixtyfiveford 3 ай бұрын
It does exist but not well known at all.
@Morrisonspouch
@Morrisonspouch 3 ай бұрын
@@sixtyfiveford I’m from Australia so maybe more known down there. Best tool for crank bolts prior to impact guns and now they are having a comeback with how narrow the access is to a lot of bolts nowadays. I like your videos
@Maltinis
@Maltinis 3 ай бұрын
This is great, have to make one myself. Thanks!
@JDeWittDIY
@JDeWittDIY 3 ай бұрын
This is a great idea! I vote we call it the "slugging breaker bar" (like slugging wrenches). Also, Moe, you should contact a manufacturer and hook them up with the idea. This needs to be a tool that's available for purchase.
@georgedonner9099
@georgedonner9099 3 ай бұрын
Pretty cool tool. Love your ingenuity Moe.
@wyattoneable
@wyattoneable 3 ай бұрын
What a cool idea.
@tkskagen
@tkskagen 3 ай бұрын
Absolute Genius!
@Enigma-Sapiens
@Enigma-Sapiens 3 ай бұрын
Cool tool! Thanks!
@fraydnot
@fraydnot 3 ай бұрын
They'll be one on HF shelves soon. Thanks for the upload
@sixtyfiveford
@sixtyfiveford 3 ай бұрын
Thanks, I'm glad you liked it
@jasondk5127
@jasondk5127 3 ай бұрын
That's great I'll have to build one of those!
@DAS-Videos
@DAS-Videos 3 ай бұрын
What an ingenious idea! It looks to work really well.
@sixtyfiveford
@sixtyfiveford 3 ай бұрын
Thanks
@2LateIWon
@2LateIWon 3 ай бұрын
Nice very versatile. Love this idea
@sixtyfiveford
@sixtyfiveford 3 ай бұрын
Thanks, I'm glad you liked it
@williammacdonald2948
@williammacdonald2948 3 ай бұрын
Great tool, good dog!
@wayneo7307
@wayneo7307 3 ай бұрын
Pretty Cool Moe ! Thanks For The Idea !
@sunhawk61
@sunhawk61 3 ай бұрын
You do come up with some great tips and idea's thats for sure. This is definitely one I could use many times.
@sixtyfiveford
@sixtyfiveford 3 ай бұрын
Thanks, I'm glad you liked it
@280zone
@280zone 3 ай бұрын
Another great idea, I built my wrench extender from you other video and love it!
@sixtyfiveford
@sixtyfiveford 3 ай бұрын
Thanks, I'm glad you liked it
@09FLTRMM77
@09FLTRMM77 3 ай бұрын
MM77 Approved 👍🏼👍🏼
@JT-tz5hp
@JT-tz5hp 3 ай бұрын
Cool build!
@carloskawasaki656
@carloskawasaki656 3 ай бұрын
Thank you for sharing 👍👍👍👍
@bigd2203snuffy
@bigd2203snuffy 3 ай бұрын
Definitely need to build one of these things! I have one of the indexable head ratchets from hobo freight. It didn't survive a few taps of the hammer. Ended up finding a fan clutch remover, It attaches to the air hammer with interchangeable wrenches. They have a hook on the end, Amazon $50 saved the day.
@Hotdaddy536
@Hotdaddy536 3 ай бұрын
Great idea..wish I'd had that 40 years ago..you always do great things..that Ginger.. she's something else..take friend..see you on the next one cheers 🍺🍺🍺🇺🇸🇺🇸🇺🇸
@sixtyfiveford
@sixtyfiveford 3 ай бұрын
Thanks
@loosh__sii
@loosh__sii 3 ай бұрын
Ive seen some one on a old youtube video make one before way back ,they are worth the time making one🌊👍☺
@benmiller5015
@benmiller5015 3 ай бұрын
This is for when youre done asking nicely lol. Also id made a wrench extension years ago based on your video. Love that thing. I did bend mine though to give it an offset
@OBD01
@OBD01 3 ай бұрын
way to go! Making my life easier one video at the time! 👏👏
@repairtech9320
@repairtech9320 3 ай бұрын
Pure Genius !!!
@sixtyfiveford
@sixtyfiveford 3 ай бұрын
Thanks, I'm glad you liked it
@spasticmuse4262
@spasticmuse4262 3 ай бұрын
Hadn't thought about thread depth as it relates to fastener strength... tucking that gem of wisdom into my hat! In my defense, during most of my professional work a 1/4" fastener was considered to be BIG! I dealt with mostly #6, #4 and smaller.
@chumleye1112
@chumleye1112 3 ай бұрын
Genius.
@SomeGuyInSandy
@SomeGuyInSandy 3 ай бұрын
Very cool!
@mikesantimore6971
@mikesantimore6971 3 ай бұрын
I believe you're the type that you do not pat yourself on your back but you're a genius
@sixtyfiveford
@sixtyfiveford 3 ай бұрын
Thanks I'm glad you liked it.
@shakehandswithdanger7882
@shakehandswithdanger7882 3 ай бұрын
I like it. Also, it might be a good idea to offset the pin about 5 degrees. This buys +/- 5 degrees by flipping it. This could help in a really tight spot. My 0.02
@byondead
@byondead 3 ай бұрын
The new cordless impact gun!
@sixtyfiveford
@sixtyfiveford 3 ай бұрын
Lol
@beauxtx1959
@beauxtx1959 3 ай бұрын
Genius!
@MrHmhk
@MrHmhk 2 ай бұрын
very nice . many thanks
@sixtyfiveford
@sixtyfiveford 2 ай бұрын
Hey thanks
@mrussell8054
@mrussell8054 3 ай бұрын
Love it!
@jackmeholf5901
@jackmeholf5901 3 ай бұрын
Dude you need to make these and sell them absolutely brilliant i am making one myself now
@sixtyfiveford
@sixtyfiveford 3 ай бұрын
Apparently it's already patented and sold mainly in Australia.
@simonilett998
@simonilett998 3 ай бұрын
Nice job👍 I have a 2ft long, 1/2inch drive version of this tool I bought on ebay many years ago, it wasn't too pricey, only difference is mine has a fixed drive at 90° where you used the pivoting style breaker bar head, so your's is actually a bit more useful for leverage when flipped out straight. I've used mine a few times for front crank bolts, flywheel bolts and transmission bolts in tight spots and it works great. I've been trying to think of what to make from a 2ft breaker bar handle, which I broke the head off a while ago. This video gives me a good idea, I think I might make a 3/8 version out of it, like you mentioned👍
@DougAskin
@DougAskin 3 ай бұрын
Cool idea, it's good to have a few options when working on cars and stuff. Ginger can let herself out now
@williamherring5441
@williamherring5441 3 ай бұрын
Commenters….Moe does the work and gets the credit; however, Ginger is the actual master mind behind the scenes. In case you didn’t know.
@lewiemcneely9143
@lewiemcneely9143 3 ай бұрын
Good stuff and Ginger was looking for a hammer handle! Bless Yall!
@VintageTinGarage
@VintageTinGarage 3 ай бұрын
Great idea
@sixtyfiveford
@sixtyfiveford 3 ай бұрын
Thanks I'm glad you liked it. That's a good looking red 66 you have there.
@VintageTinGarage
@VintageTinGarage 3 ай бұрын
@@sixtyfiveford thanks, She’s my around town truck. It’s a 65 with a 66 grille.
@Dancing_Alone_wRentals
@Dancing_Alone_wRentals 3 ай бұрын
You are the bomb when it comes to cool ideas and fun videos. Have a super weekend, tHanks for the video!
@sixtyfiveford
@sixtyfiveford 3 ай бұрын
Thanks, I'm glad you liked it
@robinfisher4990
@robinfisher4990 3 ай бұрын
Fantastic!
@sixtyfiveford
@sixtyfiveford 3 ай бұрын
Glad you like it!
@Michael-wq8qu
@Michael-wq8qu 3 ай бұрын
Beware Ginger may take over this channel. Well done on the shock breaker for difficult situations.
@7LegSpiders
@7LegSpiders Ай бұрын
That's a great idea. You are operating a tool design R&D lab.
@ferigle8925
@ferigle8925 3 ай бұрын
Gracias Jefe!!!!
@talon0863
@talon0863 3 ай бұрын
Thanks Thats a good one
@sixtyfiveford
@sixtyfiveford 3 ай бұрын
Thanks, I'm glad you liked it
@caveman31750
@caveman31750 3 ай бұрын
Excellent idea/creation. I will be making one of these because it is too dang handy and multi-use. I will throw my 2 cents in and say it will pair well with a small piece of cheater pipe to slide over the joint to regain used of a plain breaker bar. I would also bet a fella could use this to dial in that extra so many degrees after torquing to the number value.
@COL321
@COL321 3 ай бұрын
Looks useful!
@ThatJerkFromCali
@ThatJerkFromCali 3 ай бұрын
Modifying a slide hammer into one of these would also be awesome
@sixtyfiveford
@sixtyfiveford 3 ай бұрын
That would be neat
@petersack5074
@petersack5074 2 ай бұрын
Wonderfull invention, Sir ! An old valve, from a larger diesel engine, coulda been used, on the top end, of the bar - for a ' hitting point '' for the hammer. ....i use ideas, too ! As well as any other useable item, from ?...say scraps. (Glass front, on oven door, had an accident. Used the enameled covered sheet metal, of an old dryer. Looks good !) May use old wheel bearing hub, from non-driving rear axle - for a rotating table....and other ideas. Keep mentally active - folks !
@sixtyfiveford
@sixtyfiveford 2 ай бұрын
Great ideas
@petersack5074
@petersack5074 2 ай бұрын
@@sixtyfiveford oh, another one. I used that black pipe insulation foam - the split down the seam type, on the bottom of the wood garage door. Placed them slit-wise, and stapled the sides to door. Works very good - door can drop 3 feet, no dagage, and N O LEAKS. Ants can't even get in ; let alone water. Take care...from Alberta Canada
Building a DIY Power Hammer Machine "WITH PLANS"
21:14
Sek Austria
Рет қаралды 1,4 МЛН
BEST uses for Broken Old Screwdrivers VOTED #1
10:00
sixtyfiveford
Рет қаралды 234 М.
Children deceived dad #comedy
00:19
yuzvikii_family
Рет қаралды 4,7 МЛН
Can teeth really be exchanged for gifts#joker #shorts
00:45
Untitled Joker
Рет қаралды 15 МЛН
OMG😳 #tiktok #shorts #potapova_blog
00:58
Potapova_blog
Рет қаралды 3,5 МЛН
Lincoln BUZZ BOX stick Welder restore
26:18
sixtyfiveford
Рет қаралды 64 М.
How many plants do you need to breathe?  TESTED
27:44
Joel Creates
Рет қаралды 2,6 МЛН
Testing TikTok Tool Hacks: Surprisingly Amazing!
13:56
Torque Test Channel
Рет қаралды 1 МЛН
Newly Discovered PRIMITIVE WATER FILTER! 100% Effective
14:38
Clay Hayes
Рет қаралды 2,2 МЛН
HEAVY DUTY Bungee Cords. BEST use for old TIRES!
11:53
sixtyfiveford
Рет қаралды 177 М.
Not just like a Bending Machine / Straightening / Press
16:01
The Metalist
Рет қаралды 328 М.
Wire Brush IN CORNERS (simple DIY end-brush tool)
12:47
pocket83²
Рет қаралды 213 М.
Shop HEATER from old OVEN custom build
18:29
sixtyfiveford
Рет қаралды 194 М.
Qual Fita NÃO vai Me AGUENTAR😱 #shorts
0:45
Lucan Pevidor
Рет қаралды 14 МЛН
Pura Pura Pahit #shorts
0:15
Diandra Alkayyisa
Рет қаралды 9 МЛН
🤪#LondonBridges catching Mom! #kidssong #funny
0:17
J House jr.
Рет қаралды 97 МЛН
Pura Pura Pahit #shorts
0:15
Diandra Alkayyisa
Рет қаралды 9 МЛН
Раковина для мастерской из шин 🤯🔥
0:51
Citadel Shorts
Рет қаралды 8 МЛН
There’s a surprise balm in every snack!? #challenge #candy
0:10
We Wear Cute
Рет қаралды 37 МЛН
小天使过生日,她为什么不开心呢?#short #angel #clown
0:53
Super Beauty team
Рет қаралды 6 МЛН