How to fix a battery

[@hammerandhome]

Do at your own risk, batteries are dangerous and should be handled with care. This is for entertainment

[@KTannerPaisleyKK]

Brad you reminded me when we would label our underwear at home with our names to avoid mixups😅

[@hammerandhome]

@@KTannerPaisleyKK 🤣 so true

[@yasoutherncousin]

It worked.. I used thin wires.. started to smell it after about 5 seconds. but I left it in for about 10 seconds.. it's now charging.. thank you..Dewalt 20v 4ah

[@tonyabdon9492]

It worked, I literally left it connected for three seconds. I have a feeling as soon as you see that spark you could probably put it on the charger, but it worked.

[@hammerandhome]

👍 great

[@porschadominguez8262]

Dewalt will give you a new battery within 2 years if it goes bad. No questions asked!

[@zack9912000]

Yep and tbis is how house fires start

[@jackwilliams7738]

What number do I need to call?

[@joranvandenhardenberg6723]

4 years old battery is fixid

[@supersoccer88]

It’s 3 years

[@Johnbro8]

I have done this with my batteries before and it works, but I wouldn’t connect for more than 1-2 seconds otherwise heat builds up in the wire and it could damage the battery. Originally I contacted Dewalt, after I mistakenly, completely drained my battery and it wouldn’t charge, and their response was, buy a new battery.

[@jeffreybojorge1824]

What are you connecting it to

[@wtop1054]

Unbelievable I just got my 60v battery working THANKS A LOT

[@likemilfes]

Same here, a 60V on a third party lamp, probably some flow despite device off, or just too long not used….in any case, it now charges again!

[@JarettHerder]

What did you jump it with? Another 60v?

[@scrogathon]

I had 11 of my batteries in storage for a few years and let's just say that was an expensive mistake. Only a few were able to take a charge and those don't work too well anymore

[@briandemedeiros4112]

What about the battery that your boost from? Is it OK? Or does it lose power?

[@jojohernandez13]

What gauge wire are you using or can you use any wire

[@malevolent73]

Does this work with Milwaukee batteries too?

[@jlousy1901]

Thank you! Just revived a dead v20 battery

[@hammerandhome]

Sweet!

[@lisburnger]

This 100% works. Cheers. SAVED ME THE PRICE OF 2 BATTERIES. £80

[@jimcatanzaro7808]

This won’t work most of the time usually 1 cell in the pack goes bad or is leaking

[@benshell8662]

Don't know about other brands, but dewalt batteries have a fusible link inside then that can blow if they get too hot inside, has happended to me several times. You can take the top cover off and solder it back together and fix it, if this doesn't work

[@hammerandhome]

Thanks I didn’t know that👍

[@Helaimiaabdelkarim]

Can we connect it directly to 220 volts?

[@JarettHerder]

Please dont 😮 using a car battery or something below the voltage of the battery maximum. Also make sure ur wire is big enough so it doesn’t melt while ur doing this

[@paullachance6113]

Like a dream. Ty very much. Brand new batteries were DOA. This fixed them!!

[@robindavis4404]

What if that doesn't work? Is there anything else you can do?

[@hammerandhome]

Not really, You could replace a cell. But that’s tricky and dangerous. Best to just buy a new one.

[@dominoespizza1756]

You’ll get a lot of inrush current doing this, could damage the cells if they are still fine but just under the minimum voltage. I would get a cheap variable voltage power supply and limit current to 100 or 200 mA and the voltage to half the battery’s nominal and slowly bring it up as it charges.

[@jonasorth]

Only do that if you know the Voltage of each cell or at least the total Voltage of the battery pack. Each Cell should have over 3V wich leads to a total voltage of 18V. If the Voltage is below that you need to replace atleast one cell. The equipment you need to repair a bad cell costs more than buying a new one. So keep in mind that something like that only pays out after multiple repairs. I would say you need at least 4 batteries. Repair it or Sell it. Don‘t throw it away!!!

[@ja054]

What did you use to spark it? Thank you!!!

[@APinTheAK]

Electricity. The working battery is fully charged, you are essentially forcing the “dead” battery to take some juice from the good battery to where it will have enough to be recognized by the charger.

[@princeekantema9875]

Can I replace the cells with lithium cells

[@JoshthePizzaman]

Thank you soo much!!! I brought 3 20v Dewalts back to life. You saved me soo much money!! 1 million thanks! 🎉

[@hammerandhome]

Thanks , happy it worked for ya !

[@Anonymous-zv9hk]

The only thing more fun than resurrecting dead 18 to 20 volt Li-On batteries with a battery charger connected to a wall outlet, is by removing dents in your truck's sheet metal by getting really cheap inflatable beach or basket balls from a dollar-type store, or from Amazon, and placing them behind the dents you want to straighten, and then wedging the deflated balls in place with suitable pieces of 2' x 4", and then connect a small air compressor, capable of 150 psi, with a long, strong piece of tubing, and then cutting the air pump on, while hiding behind a friend's near-by truck. (Always wear ear and eye protection and a ballistic vest, or an armored suit plus eye & ear protection if the ballistic vest is not available. Safety not assured.)

[@Browneyegang]

Am I missing something? What are the positive and negative connecting to from the Dewalt battery?

[@hammerandhome]

Watch as the video quickly passes by the 2nd batterie. There is a longer version of the video on my channel. This is just a short.

[@davidz9699]

Worked again. Thanks

[@keysautorepair6038]

Never let your battery get low on charge facts.

[@hammerandhome]

True! So important

[@WichhartAcres]

Thanks man you just saved my 6ah dewalt battery and my 8ah bosch core18v battery!

[@hammerandhome]

Awesome 👍

[@outlaww3002]

Where can I get these cables

[@hammerandhome]

It’s just wire. Any hardware store

[@DarcyJohn-y6u]

What gauge of wire is needed. 🤔

[@rushunstoppable5769]

Try it and get power to the battery but still wont charge

[@davidgutierrez4932]

Mine too

[@JarettHerder]

What causes this to be the solution? Is it just so dead that it can’t start charging? I only have 1 60V how could I jump a 60v flex?

[@hammerandhome]

Yup that’s pretty much it. I used a 20v to do my flex volt.

[@JarettHerder]

@@hammerandhome Awesome I tried it with 2 5amp 20v and it worked but I was hesitant to use my 5amp to do the 60v. Worked perfect on my 5amp ones! Will save me a few hundred dollars if it works on my 2 dead 60v!

[@hammerandhome]

@@JarettHerder sweet.

[@KY_REDDYNESS]

Wow! Thank you! That worked for me! I think I used to light gauge wire cause they got a lil warm but it worked! YT ftw! 👍🏼

[@samsno3667]

I just tried it today and it worked but reading other post states that the battery could be still bad as a cell might have lost the recharge capacity.

[@TylerSmith-qx6uz]

Do you think this works for single 18650 batteries?

[@Triple_C_RC]

I would get an 18650 charger, but yes it's all the same principle. If you take a good charged battery and hook positive to positive and negative to negative it will start charging it. Just don't keep it together very long as explosion can happen when overcharged.

[@bradh5612]

Hey Brad, it's Brad lol. Worked like a charm. Thx 😊

[@hammerandhome]

@@bradh5612 awesome Brad! Thx for sharing Brad

[@JorgeFlores-im5vh]

Good my friend thanks

[@KeenanWhitman-sv2oe]

Hey I've got a go-kart that I eraser go-kart and I'm putting a Segway battery into it I'm not sure how exactly hook it up to make sure the battery is charging

[@hammerandhome]

Sorry couldn’t tell ya how to do that.

[@poushaun]

Hey brother I have an old Ryobi CDL1802P with 2 dead batteries it was sitting in the box too long and totally forget I had it. How do I revive if both batteries are dead please?

[@hammerandhome]

Not to sure, but maybe you could use a small 9v battery to give one a bit of juice. I haven’t tried this. So do at your own risk.

[@jf275]

Got my 40v dewalt working, took a chance and bought the charger, battery and weedeater for 48 dollars. Now it's value has tripled :P

[@poransingh8420]

Does this work on the flexvolt batteries?

[@hammerandhome]

Yup, it worked on one of mine

[@z28black84]

Dose that work with 2 different styles

[@Triple_C_RC]

I would think as long as voltage is the same shouldn't be an issue.

[@Mattman4god]

Worked for me on Kobalt!

[@wandersonribeiro8926]

Eu fiz e deu certo aqui, muito obrigado!

[@Alphasig336]

You should see if it actually charges. Seen may after this run for 5 minute and still show charged

[@KamranRulez2020]

Can this work on an Airsoft battery?

[@hammerandhome]

Not sure, theoretically yes. But I’ve never tried on one.

[@RobertFegles]

Those are lithium polymer so probably not. If it’s got 18650 liphfe batteries then jump it with 4 volt or from a parallel 18650 in 4 volts the batteries inside this unit are 18650 in series parallel 4.2x4

[@HaerilAnwar-e1e]

It worked...thanks a lot 😁😁😁😁

[@Kmot9]

Thanks! Just saved some batteries!

[@humbertofrias864]

Should I be worried about the spark?

[@brandonlee8400]

Thanks. This worked for me

[@hammerandhome]

That’s great!

[@dalebarker510]

I've tried this trick many times and never works for me

[@jimmiestum]

Does not work I hate liars

[@luispulido5173]

Yeah for me too. It didn't work. Maybe the battery it's beyond tepair 😮

[@JarettHerder]

@@jimmiestumit does work I literally just did it. 20v 5amp wouldn’t register at all on any of my chargers. I did this for 5 seconds and now it charges.

[@rodjohner7817]

I have a 20 volt that 1 lime on the battery lights up but when I put it on the charger it stays solid red DeWalt

[@winsmanmicro565]

thanks mate its working well now

[@ambitious_drive]

Most definitely works!!!! Thanks!!!!

[@hammerandhome]

That's Great!

[@iangonzalez9644]

worked on 3 of my dead batteries!

[@Tinovinni]

Same by battery thanks

[@HECKAKYH-ADEKBATEH]

Buy lab power supply and limit current!! Or add large high Watt but low Ohm resistor (10-50). Otherwise current is limited by battery impedence, which is low and you damage batteries. Also, your dewalt power supply lacks low volt detection, is crap.

[@littleboat888]

tried it, did'nt work

[@MrOnesicpup]

I have used this trick, it work's

[@BlackyKekaulua-oj4nf]

an if it dount work then what do I do

[@hammerandhome]

Buy a new one unfortunately

[@alldones.a302]

I save one of my batteries flexvolt 9amp thanks

[@hammerandhome]

👍 awesome

[@SacramentoCalifornia-ec9sz]

It really works

[@bobmackay9281]

I tried this it welded the terminals on the battery in under a second

[@hammerandhome]

Wow! Never heard of that happening. Must have been something wrong with the battery or terminals.

[@Gollammeister]

They meant to only last 3 yrs use then that's it I wouldnt mess with em doing this

[@stephenhagen8976]

worked for me. Thanks.

[@bobbybonnilla9979]

Cmon guys I got like 4 batteries won’t charge now imma have go blow myself w this hack lol thank you

[@miguelruiz3097]

thanks this help to much to meee

[@davidtubat2472]

Did not work with my AEG18V lithium

[@bbbnz50]

I thought you werent meant to interrupt the charge when it wasnt fully charged

[@jorgeobando8442]

Mi batería mala se queda la luz indicadora fija y no carga

[@BradleyFraser-y7h]

Hay Brad n Brad it’s Brad fae Scotland 🏴󠁧󠁢󠁳󠁣󠁴󠁿 how long for a 18 v Bosch

[@hammerandhome]

@@BradleyFraser-y7h the wires only need to be on for a second or two. But do at own risk.

[@tiktokfavedave]

Doesn't work on ridgid

[@RommelEvangelista-to8zn]

Did this but it didn't last long

[@davecichi1123]

I looked at this and it looks like your video is only halfway the first parts cut out because it doesn’t show you what you’re setting it on it just shows you you’re hooking it to the Dewalt battery🤔

[@hammerandhome]

It’s just a short, there is a full video on the page. But if you watch the last half of this video, you can see it’s attached to another batterie.

[@garymorgan938]

How long if it's been drained,my Grandson lost it outside. It's not excepting any charge. Im only a Machinist electrical work is another deal. Please help me learn. Thank y'all, I'll follow with my results. Hopefully it will victory ✌️

[@hammerandhome]

Really it just needs a quick second or two. Then put it on a charger. If it didn’t work than you probably have a damaged cell.

[@CitekCitek]

Tq friend save money👍👍👍👍

[@RioTintoGoAwayFromDrinaRiver]

It is temporary solution only. Once battery was dead, you must buy new one or repair it. It will never be the same again.

[@ראובןארביב]

Thanks its work

[@jonkarres2877]

Tried jumping my 60v and it sparked like a mofo. No idea what that means ???

[@wesbrewer1791]

Tried this and it fried the good battery. U owe me a battery sir

[@hammerandhome]

Sorry to hear that. Must have crossed your wires. Do at your own risk

[@jjb0894]

I tried this on a Milwaukee battery and it didn’t work.

[@neillorenz5129]

This worked for me. Saved me from buying a new one.

[@hammerandhome]

Excellent!

[@treyonbaird9853]

Why is no one showing its now charging before

[@MDVandenberg-n6v]

I tried this and the wires got extremely hot

[@dhanaine3009]

I tried but it but Didn’t work for my 2 weeks old Dewalt battery .

[@hammerandhome]

Definitely take it back

[@danariusrobinson5215]

A technique from modern world Apocalypce after nuclear war. Hell yeah!!!☢️☢️☢️☢️☢️☢️☢️☢️☢️☢️☢️

[@QeeWee-w4n]

I guess fixed for one time only

[@mysevencrew3625]

nice tq❤❤❤❤

[@haroldmitchell1207]

Am I missing something... Is part of the video missing?

[@toddmoss6370]

NY work

[@VITAL313]

Спасибо, мастер! Сделал как показано, всё стало заряжаться. 😁👍

[@terencemerritt]

That battery still has yellow light. Not charging

[@hammerandhome]

Charged up just fine.

[@toddmoss6370]

Did not work for me

[@garygoldsmith3887]

Tried doesnt work

[@muskieluver]

You never say what the wires are connected to is it car battery charger?

[@hammerandhome]

If you watch the whole video, you can see it’s attached to another Dewalt battery.

[@Pepe-Tropical]

Je n'ai pas compris pourquoi tu fais ça. Il n'y a pas de sous-titres en français. J'ai un problème avec une batterie DeWalt flexvolt de 9ah qui ne charge que de 1/3 . Pourrais tu m'expliquer ? Je peux traduire les commentaires

[@radoslavsismic9046]

Presne tento problém mám aj ja s Dewalt flexvolt 12 Ah nabije sa iba na 1/3 kapacity a funguje iba ako 18V batéria vôbec nefunguje na 54V

[@EricFarmer01]

These hacks never work for me, but it seems like every comment was successfull.

[@KeenanWhitman-sv2oe]

And mine's already taken a charge

[@jjpicasso]

Is not. Work for my

[@paulstubbings645]

Gonna try with 5 ah 60 volts. Only a year old and won’t take a charge.