Walther CCP vs Sig Sauer P365 - Which 380 is Better

Рет қаралды 9,934

Күн бұрын

Пікірлер: 44

@localgunguy4992 10 ай бұрын

The p365 380 shoots like a 22LR and I have small hands. It was a pleasure to shoot and it’s a tack driver because of it. I prefer it over my G42 because it’s a little thicker and has more capacity. Good review. Shout out from Michigan.

@Sig_P229 6 ай бұрын

Which has more recoil? The 42 or 365

@anthonyvitelli39 4 ай бұрын

@@Sig_P229 Definitely the G42

@RJHerb 10 ай бұрын

Hello Hammer Striker, and thanks for another great review! I have the Sig P365-380 and I like it quite well. Before taking it to the range for the first time, I dry-fired it maybe 50 times, then I field stripped it and cleaned and LIGHTLY oiled it. At the range I fired a combination of Blazer Brass FMJ, Sig-Sauer Elite flat nose FMJ, Ammo Inc. JHP, Hornady Critical Defense, and Underwood Xtreme Defense for a total of 400 rounds without a single issue of any type. The only thing about the gun that I don't like are the sights...The dots present themselves as gray during the day, but in semi dark to dark conditions the tritium dots are too small for me and I actually lose the front sight. Next payday I'm going to replace the sights with a pair of XS-Big Dots.

@bobscar327 9 ай бұрын

Great work. Another good comparison. Great channel with really good info and so well presented.

@mikedgg2 10 ай бұрын

First!!! I like the easy to rack of the Walther, but I like the Sig better. It seems higher quality when you handle both.

@stopthephilosophicalzombie9017 10 ай бұрын

Oh there's no question which one is higher quality. The CCP is made in the Umarex factory. The barrel might be a genuine Walther barrel, but the rest of the gun is pure airsoft quality.

@lizzapaolia959 9 ай бұрын

Interesting video. We had no idea the Walther had a magazine disconnect. We agree with your comments on the magazine disconnect. Great review thank you for sharing your videos 🙏

@Eric_SR 10 ай бұрын

Love my P365 380. Very light weight and easy to shoot. Mine is very ammo sensitive. I finally found one that doesn’t give it issues, but it took some money to figure it out. AMMO Inc 100Gr if anyone is looking.

@michaelm233 8 ай бұрын

Love my Sig 380 as well. In my opinion it shoots like a dream with very little recoil and is easy to stay on target. Fiocchi is the only ammo I had problems with. I use Federal and Remington with zero issues.

@Eric_SR 8 ай бұрын

@@michaelm233⁠I came across a box of Ammo Inc 100gr at a little shop. Thought I’d give it a shot. Not a single issue. Drove back and bought 5 more lol. Thanks for the heads up. Those brands should be easier to find at big box stores.

@user-rn5ks8sf5x 10 ай бұрын

Would like to hear your thoughts comparing the Sig 365-380 and the Walther PD380.

@richki.24 10 ай бұрын

I love the 380acp .Just bought another 380acp ... Grand Power P380 and it's a Glock 19 sized 380 and it's a blast to shoot

@anthonyvitelli39 4 ай бұрын

I find the P365-380 to be the sweet spot for the .380 cartridge. Not too big, not too small. Love mine.

@newtquick1757 9 ай бұрын

Always enjoy your videos...

@b.c.731 10 ай бұрын

I like the p365. Small and manageable.

@hondasaurusrex6998 10 ай бұрын

Thanks Hammer for the comparison. Always liked both brands but when it comes to quality I think SIG came on top on the 380acp. Although my P365-380 had an issue with the recoil spring assembly. Got a replacement from them now it's running perfectly. I looked at a CCP but my P365-380 seem a lot better overall. Looking forward to your comparison, maybe, the new PD380 with a P365-380.

@stopthephilosophicalzombie9017 10 ай бұрын

The CCP isn't a true Walther. Made in the Arnsberg plant owned and operated by Umarex.

@timrobinson6573 10 ай бұрын

I have a CCP in 9mm and I am not impressed with it. I have one of the early models in 2017 and the build quality is poor. The polymer of thr frame feels cheap. The machining on the slide was low quality. There was a portion of the striker channel that had an uneven rough razor sharp edge, it looked like it was poorly finished with a needle file or something. The machining on the sear was also rough, I could see maching marks and the surface was not flat and level. It was really rough machining. I'm not opposed to cost effective manufacturing like Ruger does but this wasn't that, it was just low quality work. The striker spring started to crumble on the end after 2 years. The trigger is HORRIBLE. Worst trigger I've ever shot by far. Long mushy no wall and the reset is all the way back out. The trigger return spring is so weak and return length sonlong that sometimes you dont let off all the way and the gun fails reset the trigger. There's so much room for improvement, it really needs a complete revamp. Having said all that the recoil is noticeable less with thr CCP. I widh Walther would put more development effort into the CCP line

@RoadKing-ky2bs 10 ай бұрын

I had considered one of those early CCPs around 2015 or 2016. After reading up on it and seeing videos, I quickly dismissed that notion. Your statement verifies my beliefs. Now, I do own a 5" PPQ M2 in .40 S&W and absolutely love it. I am considering the newer PDP as well. Walther makes great guns as a rule, but the CCP was a lemon....at least the 1st generation.

@JohnSmith-nl4zh 10 ай бұрын

Yep, that's why I am glad that I bought their PPS instead.

@stopthephilosophicalzombie9017 10 ай бұрын

While I've heard the newer CCP's are improved and use a stainless steel slide, the internals are still questionable and the gun can be short stroked in such a way that the sear catches, but no round is loaded in the chamber. The early CCPs were riddled with malfunctions and quality problems. I really think Walther started to go downhill when they were bought by Umarex, and the CCP is made in the Umarex factory in Arnsberg, not the true Walther factory in Ulm.

@FindersKeepers88 10 ай бұрын

Good, thx

@RedcoatsReturn 10 ай бұрын

Superb review! …Best in Class 💥💨💨 👏👏👏👏👏👏😊👍👍

@thefleaflop Ай бұрын

Hi nice job,... Thanks. I just bough a new one CCP M2... and was very surprised there were no lands and groves inside the barrel. No sharp edges anyway, the lands seem more like slight humps. that fade into the groves Is this common to this model? I can not hit the broad side of a barn with it....

@johndeere1951a 8 ай бұрын

Comfortable grip size and weight. Thats what I want with large/ ExLg hand size. I just bought the new old design G25 Gen 3 .380 9mm kurz. G19 size frame, 4.02" barrel, and very important 15 & 17 rd magazines. Even got it in my favorite OD Green . Rest in Peace Gaston Glock 🇦🇹 🥀

@timrobinson6573 9 ай бұрын

Is it possible to pull the slide back far enough to load a round but not quite far enough to cock the striker like in the 1st Gen CCP models? Can you test this so we know if they fixed this safety issue

@brucesanders8343 10 ай бұрын

I have a S/w 380 eazy rack and a Ruger security 380 and trust them with my life!!!

@fredfleming8905 8 ай бұрын

Any suggestions where you can get a holster for the Walther CCP M2 380? Having terrible time finding a holster….prefer Kydex if possible and OWB.

@cherokeecowboy7558 7 ай бұрын

I just found the Bulldog holster w/extra mag pocket. Fits the CCP M2 380 well but the belt clip is kind of flimsy. Only about $25. I'm sure there's better out there without breaking the bank.

@fredfleming8905 7 ай бұрын

@@cherokeecowboy7558 I was able to find one on Amazon for the Walther CCP. It did not specify .380 however it did fit…a little tight but it seems to be loosening up some. It holds the gun firmly and has a low profile print when coverd by a shirt. Price was around $22.00.

@timk4502 2 ай бұрын

Sig P365 9mm is 1.1" wide, not 1". I believe the .380 is the same.

@Fred_Bender 9 ай бұрын

The mag disconnect can be easily disabled .Voiding the warranty .The CCP is fairly accurate but low capacity .

@erictrippe2778 7 ай бұрын

The p365 .380 is the same size as the 9mm.

@justin5421 7 ай бұрын

No advantage to the CCP. You can get the 12 round mag for the P365-380 which not only gives you a full grip but gives you 50% more capacity then the 8 round CCP. You can even swap to the X/XL grip module if you want and use the 12 round mags as well with the P365-380