Anytone AT-D578UVIII Pro, DMR/Analog/Tri-Band/Crossmode/Crossband Radio

[@bradleyclark88]

I have an Anytone 578UVIII Pro in my semi truck here with an MFJ 1414 dual band antenna. The receiver in this radio is absolutely amazing! I can consistently receive repeaters 45 to 50 miles away. Sometimes farther. I have been able to pick up repeaters over 100 miles away at times. Once you get the codeplug set right, it's really easy to use. I wish the scan worked a little better. When I'm scanning on the B side, and I have my DMR Hotspot on the A side, it won't hear when someone calls me on the A side. That's frustrating. But other than that this is an awesome radio!! I'm very happy with mine.

[@DNTtreadONus]

Passed all 3 test elements today!!!

[@dcsguy2546]

Congratulations welcome to ham radio.

[@HamRadioConcepts]

wow congrats

[@KX4UL]

Congrats! Get on the air ASAP, have some fun and help promote the hobby. 73!

[@BoB4jjjjs]

Well done John Shenk getting through the elements, All in one day! Wow.

[@mlr06121974]

Congratulations John. 73 de KE5MUG

[@kk0dj]

Here it is June and I'm finally catching up on some of your videos! Thanks ... enjoyed it.

[@Iridium242]

Cool, cant wait to pick up one of these, I have the analog dual bander from them and its been awesome so far.

[@galax574]

I received my Anytone AT-D578UV several days ago and started programming. This radio is able to receive airband frequencies so I set several airband frequencies at which my home base is able to receive. Everything works fine and I could pick up traffic on AM 127.05 MHz (ATIS Departure). However, yesterday I have no clue what I did to the radio so that it was no longer able to receive airband (precisely pick up traffic on airband). Before I found this issue, I just did few adjustments on the settings via radio MMI, and swapped the short press and long press of the channel knob to SP: AM/FM and LP: VFO/MEM. Apart from these adjustments, I have done nothing. I didn't even touch the coaxial cable and antenna. The airband then went silent... During troubleshooting, I found that there is a "S" icon on the radio display (see my photo) and I didn't remember whether or not this "S" icon was already there at the time I was able to receive airband traffic. I don't see any description about the icons in the manual and on Google. So, does anyone know what the "S" icon means, and does it cause this issue? I actually accidentally disconnected the radio power input during TX, that is, the radio suddenly shut down during TX. I don't know if that would brick the radio and cause this issue. I was about to give up because it didn't help even I reset the radio to factory settings and reloaded the factory codeplug. At about 23:00, I started listening to FM radio before I fell asleep. An hour later, at about 24:10, I decided to give the radio the last chance to see if the airband was available. Surprisingly, the airband function (particularly I mean ATIS Departure at 127.05 MHz) resumed to normal with loud and clear audio. I have done nothing at all - The radio seemed to automatically regain reception of the airband frequencies. Let's see if there is any malfunction of FM/AM reception. I shall update the issue later. PS: The way I discovered the malfunction of airband was by listening to FM radio for an hour. Now I (temporarily) regain reception of airband also by listening to FM radio for an hour. So "listening to FM radio for an hour" seems to be a key to success/failure.

[@IgorDeCamps]

Nice Review. The little issues it has have been getting addressed with current Firmware updates. Great Radio.

[@Fearlessmullet]

I believe i just found the radio i have been searching for thanks man, great video!!!

[@speter32701]

Agree that the 878 has fantastic sound. In addition the internal speaker is better than any of my other handhelds including my Yaesus.

[@Rustfish]

Nice intro to the 578 video. I have one installed in my truck and couldn't be happier. One note I'd add is that this radio comes in 2 versions. There's a part 90 version that doesn't include the 220 but adds the expanded uhf/vhf TX channels ( VHF 136-174 MHz & UHF 400-480 MHz). Perfect for the Ham that uses a radio for work and personal use. If you're interested in that version, google "Anytone 578 part 90". Also, be sure to upgrade to the latest firmware. There have been many important updates since the radio's release.

[@sgtgrantham]

I just bought one. I have the 878 and works great. But I just noticed that the 578 shows it only operates in 144-148. The 878 operates 135-174. I bought mine for ham and emergency services. Sometimes I need to direct the wing in for a landing or give them info. Kind of a spoiler.

[@KX4UL]

Looks like a really cool radio loaded with features. You have my interest up so, I am looking forward to more videos about this radio. Something fresh and new is always fun to play with!

[@moisesalec4604]

i know I am quite randomly asking but do anybody know a good place to stream newly released movies online ?

[@khalidtrevor9449]

@Moises Alec Flixportal xD

[@moisesalec4604]

@Khalid Trevor Thanks, signed up and it seems like they got a lot of movies there =) Appreciate it !

[@khalidtrevor9449]

@Moises Alec no problem :D

[@beachbum9869]

Just came across this radio tonight. I am very excited about this unit. Looks well built. Came to it through bridge comm, who I worked with commercially years ago. I have the bc220 and it is an excellent rig, so I know if bridge comm is selling this anytone, it is nothing but good. Love the fact that it is a triband that includes 220. Love my 220, great band. The fact that it does both analog and dmr is a great plus. I have a dmr ht and got frustrated. So I am looking forward to taking the bridge comm university. Eric I have not seen any, or could not find any follow up video from this one. Other than the programming video. Keep up the great work. Stay safe, stay healthy.

[@TheDisorderly1]

Pretty cool, I hope you post a new video soon showing how the crossband works.

[@Aerospaceman]

Nice video. The Anytone may become an upgrade for me as a novice tech I got a Baofeng (Chinese) UV-5RE to get on the air and gain experience. Oh I started out in Orlando as a navy recruit back 79. None of it exists anymore - change happens. KJ7HWV. Bill. Spokane Valley WA.

[@Ranchhand323]

Just bought one today.

[@sergiudr6315]

Good morning Eric! I have seen your video review of the Anytone 578 and I have to mention that the radio does have APRS capability but it will not beacon at all if the radio is receiving a analog or DMR signal, in other words the APRS beaconing is totally disabled if the radio is RX-ing. Maybe in the future Anytone wil solve this with a firmware upgrade. Keep up, you are doing a great job and 73 from Romania!

[@gatesmw50]

With all the technology out there today, 5-7 watts on 220 is the best they can do ?

[@Rusted_Link]

If they could add MURS, GMRS and CB how happy would we be? 3 or 4 SJO's... Am I getting greedy or watt?

[@stephenwilliams5201]

Even the humble smart radio is great. Tks

[@yosb961]

Hey, the range here is: (TX/RX 144-148MHz, 420-450MHz. Part 15 certification for 222-225MHz ) while any Baufeng can work in : VHF: 136-174 MHz(Rx/Tx). UHF: 400-520 MHz(Rx/Tx); it is very narrow

[@jozefbezan2501]

Danke für das tolle Video.73,von Jozef,S56CJG😊😊😊

[@chrisjct]

I will be doing an unboxing and all out review of my radio that is coming in tomorrow April 27th I have a channel so if anyone wants to know how to set it up aprs GPS in a suv I'll show that I have a at 778uv and I love it this 578 is going to be very popular this year and going forward no other radio does what this radio can do not even close

[@PatrickDickey52761]

Have they activated the Weather Alert feature yet? My understanding last year at least, was that it's there but not actually set up to do anything.

[@chrisjct]

Nice review I'm looking into getting that now I have the AnyTone At 778 so ima try this one I'm in to dmr now so this is right what I need

[@joecormier6720]

Will that radio work with the cigarette plug adapter? Also what is the best antenna to use with that?

[@thebear6751]

Can you extend the transmit frequencies

[@ericl3590]

Please do a thorough review of the antenna also. Want to get a tri-band radio for the car and wondering about antennas. I imagine that the larger diameter rod will help reduce wind deflection while driving. N3MES

[@rickpinelli1586]

I use Diamond Tri-Band antennas...

[@elitecombatfitnesscentral6170]

Can this unit also accommodate GMRS?

[@larryroop5924]

Eric was the second video ever done on the Anytone 578 Mobile hooking up the Antenna they sent you and putting it in your truck and test it all out that way. And any other parts of this radio you did not cover in the first part.

[@KE8ODY-WV-Ares-Ham-Dad-3O4]

So do I really need to buy the RT Systems DMR Programming Software that they claim is only for one radio? So if I buy a 578 and a 878 I need to purchase $50 in software or is there free software or do you recommend the RT for a beginner?

[@ronniesuperx]

Hello, I have a 578UVIIIPRO DMR Radio. How can I connect power to it in my House? Can I plug it into a wall outlet OR do I need to get a power module???

[@Pedro116092]

just watched one of your older vids re 27mhz ssb cb raidos. it has been years since I last spoke on my GE and I was going to set it back up but realised I cant rember the channel allocations. ie which ch is the call ch, which one is the emergency ect for both am ssb and which are setup for other means. Looking forward to hearing from you. I forgot I cant rember the 10 code or the 13 codes either, maybe there is a site web page to get this info. Regds from Australia

[@n1iex]

Awesome radio thank you for the review!

[@FStewartIII]

unique question, can you use a standard network cable to extend the mic cable if you are remotely mounting the mobile unit?

[@freddydee270]

Thanks great video very informative. I'm a new HAM as of Feb 1 2022. Can this radio be used as a basic 2m 70m analog with my local repeaters with CTCSS? I'll learn DMR in the future.

[@Jacob-mm8xq]

Does it have to be cross band repeat?

[@michaelsens8929]

Looking for a mobile radio and power supply as my first radio. What would you recommend? I looking at an Anytone D578 or a Tyt 9600? What power supply and multiband antenna would you use? Thank you,, Mike from Ohio ( studying like mad for the Technician and General exams . Less than a week!! Yikes!).

[@matthewnett]

I have to wonder how efficient that triband antenna is? With the thick element at the bottom it would widen the bandwidth so possibly making it resonant at all three bands.

[@ehsnils]

By the way - watch out for the Roaming in the AnyTone - it drives traffic in the network between repeaters badly and causes all linked repeaters to transmit frequently just to allow the radio to roam. Each radio will cause a cascade effect in the net of repeaters, at least if you have Hytera repeaters linked together.

[@dougbrunelle1923]

I'm getting this radio minus the GPS/APRS/Bluetooth. I'm running it as a base unit and don't really need those features. $299 from R&L Electronics. There are plenty of YouBoob videos on how to program these radios, as well as local ham clubs with code plugs and expertise. 73 de AD4AL

[@donaldsmith3048]

I have been unable to load my D878UV code plug into my D578UV. There are many things that must be programmed like must have Roaming programmed before it will load the code plug.

[@stevesmith5031]

although I have to set playback speed slower, these presentations are by far head and shoulders above others, in a layman's terms...Keep up the great work. I have learned more in two presentations that I have pondering BC systems .K3OW

[@rjedge54]

Thanks Eric, good review. I am looking forward to your further reviews on this radio. I too would have liked a detachable head but it’s not a deal breaker. I’m not as mobile as I used to be so I would probably use it more as base unit. I do have a Yaesu FTM-400 I am thinking of selling as I don’t feel system fusion has lived up to the hype, in spite of having 5 system fusion repeater. I have yet to have digital QSO through any of them. I spend more time on DMR with my Anytone D868’s anyway so this would be a great replacement for my FTM-400. We only have 2 DMR-Marc repeaters in the area, but I am able to connect to them just fine. I also have a Hotspot for access to Brandmeister, and the Hotspot works great for DMR, not so much the FTM-400.

[@larryroop5924]

Sorry to hear of your trouble on System Fusion. I love System Fusion and have my own repeater for that. We also have a great club repeater for DMR so I like it as well.

[@davidwerner3022]

220 to 2 meter cross band???

[@mylt1z28]

Eric, i know its been a few months since you did this video but this radio is not FCC certified for part 90 commercial use. only the AT-D578UVPRO has the part 90 cert.

[@corinthiansmelcer7699]

[@bwmcofc]

Question about the 220. I read a comment that it has to be programmed to amateur? Thinking of getting this

[@allanjones4283]

WOW!! Love your review, thankyou. This does not come in remote mount does it?

[@caseyl3631]

Awesome thanks for sharing. Thicker antenna is wider bandwidth. Does it do dmr on 220?. Is it dual monitor any mode any band? I want to monitor dmr and analog at same time. Is it detachable face?

[@gfyrmf8736]

Does this radio Rx/Tx analog? Or is it digital radio using analog which an analog radio can’t hear?

[@chadlpnemt]

Did you ever try out that antenna? I was wondering if it being thicker if it makes it more wide band, so perhaps it transmits outside of ham also if one wants to use it for GMRS or something? Just curious as I thought about ordering it.

[@HamRadioConcepts]

I used it a couple times however it rusted so bad I gave it away

[@chadlpnemt]

@@HamRadioConcepts Oh man...That stinks. How did it work when you had it?

[@kb9oak749]

I like the idea, but not going to get into DMR.. Going System Fusion or D-Star with cross mode via Shark OpenSpot 3.

[@williambeckman6900]

A plain 146 mhz quarter wave whip will work on 146, 222 and 440. So if you have height issues like I do going into a parking garage it will make it a little easier.

[@peterliljequist160]

Not recommended. Use the correct antenna that covers the bands or risk damage to your transmitter because of a high VSWR running high power with a mismatched antenna.

[@williambeckman6900]

@@peterliljequist160 Use about 5 watts on each band with one and tell me how much reflected you get. We are talking about a radio with one antenna connection designed to be in a vehicle. Not a shack radio with a switch for three seperate perfect gain antennae that won't clear a 7 foot garage door.

[@YosenBMamma]

Pardon my ignorance, but what is the purpose of the B-T PTT when there's a microphone? Also, does it not have an external speaker jack? Thanks!

[@PhilBaker1]

Any idea of the 578 uses a direct conversion or superheterodyne receiver? I'm guessing it's the former...

[@Frisky0563]

has the 220MHz power output issue been resolved?

[@joeshmoe7899]

Baofeng UV5R, $20 Hobbypcb.com band pass filter, $20 $46 (including shipping), and works fine, even in high rf, and weak signal simplex. Talking to repeater 16 miles away, from inside a city (using a beam antenna). Doesn't have to cost a lot, to be in ham radio.

[@TheWallyjp]

Does this support p25? I am interested in getting a ham rig for my truck. I do not currently have a license, but I am working towards it. I would like to be able to at least listen to p25 at this time.

[@TalmidAndy]

Does the antenna fold at the base?

[@DarkAngel-ry2pm]

I can't seem to find any information on this question. would this radio be capable of working in conjunction with a laptop for programs like winlink? (packet radio)

[@ehsnils]

I'd like to see a DMR in the 66 to 86 MHz range.

[@ThePOWERtoRULE]

Haha “Wake up a little bit!” Always keep an open mind!!!

[@2e0txe]

Interested to see the analog APRS feature set on this. Also does it have any different APRS from the 878 ?

[@brianr5439]

Great video, thanks! This might be my next radio. In your next video about this radio can you please show the scan speed? My D868 is too slow, D878 is a little better, so I'm interested to see how good/bad this one is compared to those. Thanks.

[@mikeg1zrn896]

Anyone know if the Anytone AT-D578UV can receive two DMR frequecies at the same time, or can it only do DMR on one VFO and FM on the other etc ?

[@TonyLing]

A thicker antenna element gives a wider bandwidth in theory

[@HamRadioConcepts]

Yes that is true, I experienced that when I made HF dipole antennas out of scrap LMR400 coax, it would cover an entire band with minimal SWR change, compared to a dipole made out of speaker wire. I was afraid to suggest this in the video because a lot of times the standard size dual band antennas are pretty broad already but I haven't put this on an analyzer yet..

[@oorcinus]

It also gives you less gain. The closer you get with volume to the imagined containing sphere, the smaller the possible gain.

[@Sophia-hs3rz]

Where can you buy parts for these (Anytone) ?

[@larryroop5924]

Everything I read and saw says the 220 will do 10 Watts Not 5 watts as you mentioned

[@kg7aronny]

You sure the mic is rugged for a mobile. The radio seems pretty cool and design looks similar to an Alinco. But I don't know about that mic, and plus kind of looks ugly. I got the 3 Bridgecom mobile radios, BCM series and the mics are awesome and rugged. If the mic breaks on the Anytone, is it replaceable and how much>???

[@readingrambo3058]

Noob question, is this a scanner or for ham use? Is there something that will do both? Thx

[@HamRadioConcepts]

No worries for the noob question buddy... This is a ham radio, which will receive quite a bit of frequencies, however, a scanner is much more suited for listening to a wider spectrum of frequencies with more features like trunking and digital modes..... Please subscribe, and follow along, I have a lot of information on videos to hopefully teach you more in all this radio hobby.... Thanks for watching, 73

[@readingrambo3058]

HamRadioConcepts Thanks will do.

[@sv2evs]

Not a full duplex in 2020? Very Sad.

[@stevephipps9305]

For me I would like to see mic. connection on the left. If sitting in a mobile isn't the mic cable going to obstruct the screen or hit knobs?

[@andrewdunlap5130]

Possibly not considered if the designers vehicles are right hand drive?

[@Aleks08]

МОЖЕТ У ВАС ЕСТЬ СХЕМА ОТ 578 ?

[@Eric-zb6nv]

Dude, where did you get that clear plaque with your call sign on it? I just bought an Icom IC 7700 from a customer of mine and he has the same one. I need to get one. BYW, he has this 578 UVIII radio, If it's as nice as the 878 HT which I have I'll get one of these too.

[@HamRadioConcepts]

kzbin.info/www/bejne/ZoiWiqOFfM2IfdE tell them you saw it here LOL

[@odoil071]

Etsy also has all kinds of stuff like that

[@ferdinandfummel56]

If You do Crossband Mode, can you send in System Fusion from a handheld to the one side and get System Fusion on the other side? So if it works you would have two digital modes, not only DMR

[@HamRadioConcepts]

No just DMR

[@ferdinandfummel56]

HamRadioConcepts ok thank you for the answer. I thought it would be something like the Icom Id5100 does Vy 73

[@StevieB-jj9fz]

Is Anytone better than Yeasu?

[@1958johndeere620]

Nope

[@speter32701]

My 2 cents. Yaesu is more mature by far and better quality overall. As far as sound quality and speaker volume on handheld, I like my 878 better. I have a hard time hearing some of my Yaesu radios with my old man ears but my 878 is too loud for anyone at full volume. APRS on the Anytone is missing decode which is a big missing feature for me. Also DMR is a different digital protocol than fusion/WiresX. That said if your just hitting a hotspot that to connect to reflectors you will be able to find most of the same popular groups on DMR talk groups.

[@HamRadioConcepts]

I would say no, Anytone is not better than Yaesu, because of the years of history of Yaesu and the engineering behind their products in Japan. But I said several years ago that China will eventually get past the poor quality that we saw in the very first Baofeng radios years ago, and eventually produce some great radios. Some China companies still have garbage, but the manufacturer of Anytone is getting real close. There are people that want something else other than a Yaesu or Icom, and not only that, Yaesu, Kenwood and Icom do not manufacture a DMR radio. So there is no option to choose a Yaesu DMR mobile over an Anytone...

[@1958johndeere620]

@@HamRadioConcepts I just can't get excited for a 400 dollar Chinese radio. Maybe its worth it.

[@Richard-qg7sz]

Yaesu is manufactured in Japan. Anytone is manufactured in China. Yaesu was founded in 1959 and their products were introduced into the United States in 1965. The overall quality of the Anytone transceivers far surpass any other Chinese manufactured transceivers currently being imported into the United States. However, the quality of Yaesu products are superior to Anytone's.

[@T.RockTx]

What is DMR and what is APRS. I am new to HAM radio

[@HamRadioConcepts]

DMR is a digital format, that can link you across the state or across the world through a tower that is connected to the internet gateway or a local hotspot device with no repeater in range. APRS is an Automatic Position Reporting System, It is a tatical exchange of information between everyone running APRS, no internet involved between stations.. Very useful, lots of features I can't explain here. PLenty of info on the web.

[@K4KWF]

I agree 100% 878 is best radio I can't wait to get a 578, lol junk Chinese ha ha, great video hello from the keys , K4KWF

[@joeframo3347]

Eric how much is the radio I want that and the antenna? Yeah, I really like that. It's got 220. I need it man. How much is it? Comment below and let me know. And send me the model number again.

[@gatesmw50]

Joe Framo The problem with the 220 mhz is that the TX power is the same as a hand held. To me that gives me pause about this radio.

[@davidg5308]

Thanks, Eric - I'm also interested in how 220 works on this...the antenna as well as the radio. Thx AI6OU

[@davidg5308]

See it's only 5w on 220? Enh...

[@jamieb9556]

Looks like a Alinco

[@therealwolfspidertoo]

Looks a bit like the Alinco

[@SteveHartmanVideos]

This looks like a nice radio, but that Font they are using the the text looks cheap. I hope they fix that and use a more professional looking font.

[@SIUDR7202]

Looks like a BAOFENG

[@langhilau]

Sounds like a review that reeks of "thanks for the free radio review": Everything is perfect or great or wonderful. Being a fanboy when reviewing is a no no.

[@45Unit]

Nice rig.

[@donniedotson3318]

This not toward you Eric but no 5 watts on 220 is not acceptable if they are going to only offer 5 watts on 220 just leave 220 out all together. Thanks any way

[@larryroop5924]

Everything I read and saw says it is suppose to do 10 watts on 220 not 5 watts.

[@donniedotson3318]

@@larryroop5924 Ten watts is not enough either.

[@fillmoreranger634]

The bigger question… Why do radio manufacturers provide less watts on 220 vs 144/440? I have noticed this on HT’s and Mobile radios.

[@TheMultisportGeek]

Can I please have that radio? Please give it away!

[@thebnbaldwin]

Good review, great radio, but, it's as confusing to operate as it is to program. The user manual is about useless IMO.

[@donnymazon8516]

To bad the 220 is 5watts only

[@brucesteele3052]

Functionality, functionality, functionality . . .

[@Radi0activeBen]

Chinglish made me LOL

[@theislandboy8]

First!

[@theislandboy8]

Hows the satellite tracker coming??

[@HamRadioConcepts]

@@theislandboy8 Hope to have a video update tonight.

[@theislandboy8]

@@HamRadioConcepts Lol thanks! Just looking forward to seeing how it comes out! Keep up the good work man!

[@HamRadioConcepts]

@@theislandboy8 had issues with the Arduino connectivity thats what is holding me up, soldering right this minute

[@theislandboy8]

@@HamRadioConcepts No worries man, Good luck!

[@georgevickery3561]

for over a year now have had the 878 never worked in digital mode the fm tx no better than my radio shack htx 202. sorry but I will never buy anyone again

[@everydaypatriot1083]

Try to avoid CCC....

[@HamRadioConcepts]

what is CCC?

[@bobm2580]

Overpriced, dual band (for those of us not in USA or Canada) radio. I know you want to sell this radio but don't be so desperate, I can hear the desperation in your voice.

[@skyleircolors9151]

can you hunt chicks and boys over radio ?

[@szerszynski]

I'm one of those needing a detachable face. Sorry.

[@chucksw1]

I heard they will be making an add on display......

[@JB-po3rb]

Braucht kein Mensch.......