How to make Pvc Sheet From Pvc Pipe Awesome Technology for DIY Projects

📢 #HandmadeCreativeChannel📢
📢 Subscribe My Channel - / @handmadecreativechannel 📢
Hello fans, today I will show you How to make How to make Pvc Sheet From Pvc Pipe Awesome Technology for DIY Projects.
This method that you will see in your video guarantees a 100% straight sheet of PVC with unchanged quality of PVC.
In the video you will see how I first divide the pipe in two, then heat it and impose straight wooden boards.
Once it acquires a straight shape, the PVC sheet should be heated to 70-75 degrees (the procedure is done on both sides) and then it should be covered with a wooden board and a weight should be placed, we remove the wooden board only when the PVC is completely cooled. These ready-made boards are unique for your home projects and home machines. easy to cut with a model knife and easy to drill with a drill.
In the video I show you how easy you can do (machine control panel) I hope you liked the video and that it was useful.
Friends, my name is Jordan, am the author of the Handmade Creative channel.
On this channel I present everything that I have done with my own hands. I enjoy sharing Projects I make as a Hobbyist, and what i have learned through other content creators, I am NOT a Professional, not a Teacher, my hope is I simply Inspire you to go make something yourself. We turn simple things into unique ones! Subscribe, it will be interesting!
-Creative ideas
-useful tips
-homemade tools
- hacks
- review
-toys

[@_gkworkshop]

Good job Bro👌

[@sevanson1]

Interesting video. thanks. they however make leather gloves for such work

[@aschlack8889]

Thank you

[@nadanawhy]

Hello. I watched it for the first time today. The PVC you used seems to be soft, but the one I use is very hard, making hole processing difficult. If you don't mind, I would be very grateful if you could tell me what PVC material is and where I can buy it.

[@isaacnguyen6944]

Very interesting. Later one can also use PVC glue to hook other PVC parts together. Thanks.

[@HandmadeCreativeChannel]

You're welcome 💛

[@-mose191]

Ohh! What is teh width and thickness of the Pipe used?..

[@hmarillejla7]

As a weight a water filled bucket can be used.

[@bendtherules0]

Or bricks. Adding a few bolts and tightening it is also a great way.

[@riyanesmail6876]

اخي لو تستخدم الزجاج المستخدم في ابواب الميكرويف لانها تتحمل الحرارة العالية ..بحيث تكون تسلط الحرارة من الاعلى والاسفل ..بيطلع اللوح البلاستيكي مسطح 100%

[@mrbr549]

Quite a process, great job!

[@ВладимирМакарчик-ч1х]

проще отрезок трубы закрыть двумя крышками и сделать прибор цилиндрической формы... будет оригинальнее.

[@arifconcept]

I like this

[@pmacgowan]

Is that C or F temp ?, gee I hate the imperial system

[@HandmadeCreativeChannel]

Degrees Celsius

[@patrickmonnet7642]

Bonjour, en mettant ton tube dans un four à 120° celcius et 10 minutes le résultat sera immédiat.

[@fieroboom]

Are you sure that's PVC? You generally can't cut PVC with a knife, but you can with ABS, and a lot of pipes are also made out of ABS... You can also form shapes with PVC by heating it, but it is generally much more rigid & less workable than what you're showing, which leads me to believe that you have ABS there...

[@HandmadeCreativeChannel]

Across Europe, grey pipes are catalysed with thin walls, the red ones are thick-walled.

[@SteveWhiteDallas]

Good idea. Holding something with your hand while you cut it with an angle grinder - Bad idea (and that's an understatement.)

[@nickolasfordley5105]

this is friggin stupid, you dont have to keep heating it over and over once its flat its flat

[@Breakrite]

Next video, making round PVC pipe from flat sheets. Just kidding….😉

[@Shorrey]

How thick is the wall of that pipe? I feel that my 2.5 mm pipe behaved very differently from what i see in your video - it tried to roll back once it get soft.and if i heat it up further, is starts melting.

[@HandmadeCreativeChannel]

Look for another model of pipe. However, plastics have different properties.

[@Shorrey]

@@HandmadeCreativeChannel i did it the first time today, so there is what to learn. I will what you did.

[@eone2345]

Very nice looking stone you got there

[@SharvilSawargaonkar]

Holding pipe straight in one hand and using angle grinder with other-one more example why women live longer 😂

[@Kay-br7by]

What's it's thickness?

[@RioGamersLK]

be very careful when using grinder

[@pontuskristiansen5713]

Great! This will sort me out in a million ways dude! Thanks

[@harryalcantara1756]

I'll be doing something like that , great work .

[@ChandraMCraft]

Good 👍👍

[@sevanson1]

I am surprised you haven't made yourself a vise....

[@bobcarwell9172]

Any safety issues from plastic fumes or is this low enough temps not to worry ?

[@NajmiKhan-sb4hm]

Good Idea

[@MusaMusa-sw4ek]

Nice job sir.

[@kadourmahmoudi-f6d]

bed video trops lent

[@SonuKumar-fm3jn]

Join karne koi tareeka hai?

[@visamishra4009]

Nice explan

[@drachenfeuer5042]

An iron with parchment paper also works no flipping

[@roberttill3787]

The parchment paper stops sticking, but the flipping is to destress the plastic so it does not try to return to round, which would buckle it.

[@jugaad9443]

is pvc sheets are not available in market?

[@HandmadeCreativeChannel]

In my region is not available, As and for many people there is no available around the world

[@Shorrey]

Not here either. You can ger some neilon cutting boards, but prece per m2 will be quite high.

[@shicabababengo6202]

Lovly good mind. You are 👍👍