Making a Working Smallest Drill Press

[@donwong9958]

I've been a machinist for 45 years and this is the coolist thing I've ever seen built from start to finish. Great job.

[@AtomicShrimp]

I'm impressed with how well this came out. It seemed like you were 'eyeballing' a lot of the hand drilling and cutting, and yet with quite a lot of eventual precision in the result.

[@jimmibram]

I didn't realize before you wrote it, but that is exactly how I like to work too -> Eventual precision :-D

[@ricardorodriguez-up2bo]

Is how mechanics, especially gifted should work.

[@salmahady5993]

@@jimmibram ذذذ

[@vijaysinghrajpoot3966]

Hi

[@thunderbolt997]

Precision eyeballing*

[@MisterRorschach90]

How do you not have more content. This is gold. If you released one video like this a month and slowly got better at video work you’d make a killing. Do the smallest mill, smallest blasting cabinet, smallest hydraulic press, smallest magnetic chuck, smallest grinder, smallest belt sander, smallest planer, and the smallest lathe. Then when you get super popular people will start wanting to buy them and you can make tooling to mass produce them. lol

[@copescale9599]

You sound like someone's grandma.

[@jpdjavu478]

Vc vende seus trabalhos ???

[@anthonym.pacelli1960]

The level of planning, skill and steady hands are amazing to watch not to mention attention to detail, very well done !

[@jarchambault69]

Now I want one. Heck, i want a whole shop of "tiny tools". Great job!

[@metatechnologist]

Then you can use all those tiny tools to make bigger tools!!

[@RAREFORMDESIGNS]

@@metatechnologist Or use them to make smaller tools........

[@cumaliozenen7191]

@@RAREFORMDESIGNS Bo kolay

[@junit483]

I'm blown away how effortlessly you made the build look.

[@courier11sec]

This absolutely rocks. It is pretty tough to do tiny holes in thick material. You did a brilliant job here.

[@tadeubotelho4410]

What a great job. I am researching to build a bench drill for a "watchmaker" with high precision, where there can be no more than 0.02 millimeters of play. Your project was the best reference I found. Thank you for sharing your knowledge. I wish you success.

[@baconscoobysnacks3135]

*Friend* - "hey can I borrow your drill press?" *Him* - "sure buddy no problem" 😏

[@nilsonarchillamartines7474]

Fantastic, totally amazing your work. Could you make the joy of the hobbyists and present us with the project?

[@davey2k12]

Ya no that's just over the top 🤣🤣 good build tho 👍belt drive nice

[@rapidfire-0680]

That Miniature Drill Press Is Awesome, Nice Work !

[@lolcec81]

Комментарий в поддержку канала и ролика, а также труда мастера.

[@smartperson325]

This dudes skilled at whatever job he does. The lack of measurements and precision he made the drill press with is impressive. Not many people have hands on skills and engineering knowledge

[@screwsnutsandbolts]

Great videos ! 👍

[@deaultusername]

Give it a magnetic base and you have a very small drill for accurate on site drilling of micro holes.

[@Ciloteille]

Oh, I liked that finished product there. Need more tiny shop tools. Baby knee mill and lathe.

[@pebblesthecat3625]

Please make more "mini tools" like sanders, planers, thicknessers, jigsaws, angle grinder ( this would be so useful for getting into small spaces ), mini pipe benders for really small metal tubes, mini bench saw, mini multi angle compound mitre saw ( this would be very hard to accomplish), mini sheet metal bender/press ( for bending really tiny metal boxes, mini metal roller for making straight metal in to curves and circles ( don't know if this is even possible but I'm gonna challenge you for this one !). Anything you could figure out how to make in miniature would be amazing and I know a lot of model making hobbiests would love to see them. Great video which is why I got so enthusiastic about the miniature range and why subscribed. Please keep it up.

[@Hellsong89]

One can do 1/12 scale knifes, hand planers, saws and axes that are from right materials and actually cut wood. Metal cutting/grinding tools are bit more harder to make and power tools you run into issues with size of the motor and bearings. Thats is about what limits the size, so its actually in scale. I have couple dozen such working models made, but havent delved into power tools for mentioned reason of motor size.

[@Baetzibaer]

Just have a glimpse into the Proxxon catalogue ...

[@pebblesthecat3625]

This would be a fantastic addition to my modelmaking tools - not really necessary as I have hand drills in various shapes and sizes, but just the sheer kudos of showing one off to my friends and saying "Yeah, I just made it a few weeks ago after watching a KZbin video and thought it might come in usefull" would leave them speechless as there is one guy who just buys every conceivable tool out there. I am just going to have to try and make one of these ! Now where are my tools....

[@connector8748]

Wow!! Right From scratch!! Really this is amazing. Now the Chinese will imitate it.. salute to you

[@EmmanuelMendez-f7h]

Also him: I am the Chinese

[@NHGeneral]

I am an electrical guy and always admire mechanical colleagues, they are not only creative but also extremely skillful with their hands.

[@OGMann]

Well, except for needing an entire machine shop of normal sized tools to fabricate the tiny tool, pretty cool video.

[@shanemeyer9224]

Everytime I feel like I came up with some neat and cool I see video like this and realize my stuff is nothing compared to the ingenuity of the stuff some of you guys make wow this is awesome

[@scottmccarroll2618]

That is awesome I’ve never seen a drill press as small as that actually working it looks like a normal sized one thanks for sharing Scott

[@MacStrange]

One of the best mechanical precision work I've seen in recent years. Excellent

[@amaryalvesamorim5342]

Fantástico. Vc é um gênio. Parabéns. Ficou perfeita.

[@Carpenters_Canvas]

Love it I wish I had the tools to do this , I would become addicted to learning and would some day be a beast too , I’m a carpenter , I do a lot of standing seem metal roofs , build houses and we manufacture our own flashing , this would be awesome

[@pirminkogleck4056]

get a lathe and a millingmachine , u can get a lathe for 500 to 1000 usd. and a milling machine from 600 upwards! check mini lathe and mini mill. i have a bit a bigger lathe and a mini mill and i mae my first engine this week!

[@chancesellers5425]

Wow I'm impressed 👏 that baby drill sure don't at like a little baby it has some serious power 😳

[@FixitEasyDIY]

Good job my friend 👏💯👏

[@ianwilliamtait9909]

One of the best DIY projects I've seen in a very long time. KEEP UP THE GOOD WORK.

[@BobBob-kk5xl]

OMG Duc Phuc , i like your cover version. Love it !

[@JazzbLu]

I love the step by step making each part! So cool and simple! Very nice work!

[@Suavache]

Anh có tay nghề cao trong cơ khí xin cảm ơn đã chia sẻ với khán giả tác phẩm đẹp

[@besterjack8243]

Die Idee ist so super. Und das Ergebnis wunderbar. Tolles Video.

[@jwong19]

And this is perfect for drilling PCBs...just perfect. By the way, can you do it for selling?. Thank you again for the opportunity to see your skills.

[@JuanGarcia-1125]

Te mereces un MILLÓN DE LIKES pero sólo puedo darte uno! Te felicito! Hermoso taladro en miniatura! Saludos desde Reynosa México amigo!!!

[@salmahady5993]

111

[@huydutran8910]

Thật là khéo léo quá đi thôi ! Tôi rất ngưỡng mộ bạn !

[@joaocarloscosta6152]

Nota mil, seu trabalho é muito bom, parabéns 👏👏

[@artwithdad5131]

Very impressive and beautiful creation.

[@RustyInventions-wz6ir]

Very nice work sir. Great little drill press

[@MLTharme]

This would be amazing for someone that makes alot of small items for Stopmotion fabrication.

[@hancurkanYahudi]

Wowww..... Oppppaaaaa Gangnam style..... NEW channel

[@subramaniamchandrasekar1397]

You have 2 brains. One to think inside the box, another to think outside the box. (One brain see the armature. Other sees a gear shaft.) Great work. Regards.

[@rafaelarcanjo1830]

😳 mais que miniatura perfeita, 👏👏👏👏👏. Meus parabéns, um trabalho muito bem feito. 😎🇧🇷🇱🇷

[@bahramdelaram4954]

You have done it excellently and very professionally

[@prettynitty0131]

This press has worked like a charm for my projects kzbin.infoUgkxajoEbapTfqWaadnqb04h6U576yxXp-FE . I didn't even secure it to my table top, mainly due to the fact that I was using a 15 lbs drill vise. It's not flimsy at all as to what others have claimed it to be. Make sure the locking nuts and levers are secured and there won't be any issues with light pressure and patience. I was able to drill through aluminum, plastic, and steel (steel took a while) with no problems at all. Yeah it took a little longer than a regular drill press, but I don't have the space OR the money for one.The instruction manual was worthless, but luckily assembling the press was intuitive. However, the manual would be good for ordering replacement parts if needed. There is a nice breakdown of the parts that are included in the kit. Before ordering, make sure it is compatible with your unit, it is clearly stated what models the press is compatible with.This was an excellent purchase for $40!!

[@user-gq1hp2fi9r]

Самый лучший сверлильный станочек. Сила. Ставлю класс!👍👏💪

[@carmelbenitez1511]

Sorprendente capacidad...fina terminación y diceño es fantástico y utilizable producto 👏👏👏

[@alfihry]

Small & hard ... Nice job congratulations

[@mack_mcmillan]

This is SO impractical. I love it. Hehe

[@vintagerestoration2252]

Really Hard work for this tiny cute gadget. Beautiful✨❤

[@garetkonigsfeld2]

Nice job best mini thing I've ever seen built on KZbin. 👍👍

[@honda9663]

Waow Waow Waow Excellent Good job man

[@stuartodell1709]

Beautiful. Make more mini tools for sure. Please do a mini metal/wood Lathe too.

[@KING-kw8nz]

Perfect👏

[@serbakayuchannel5586]

nice to see you make this very unique small drill press. this is very difficult for me.... greetings from Indonesia🙏🙏

[@lynnlefever7243]

Amazing small and unique tools very attractive always liked small tools it's the cutest ever😊

[@onemansjunk01]

Small and mighty, simple beautiful 👌🏼🤘🏼👍🏼

[@abbeabbelina398]

Hehe hôm nay em được nghe cô Mây hát gòi :))

[@rockymims8183]

This is awesome. Now I want a mini drillpress

[@dragonshadow1902]

The irony of using a full size drill press to make a diy drill press.

[@Professionalfailure]

Thats how production works, you use machines to make more machines

[@raymondj8768]

THAT IS SO CRAZY DUDE YOU HAVE MAD SKILLS !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[@_9519]

тебе нужен регулирятор оборотов на таких высоких оборотах сверло быстро потеряет работоспособность. а так всё 🤩

[@ЖелезнаяЖизнь]

Ну если что, сверлу такого диаметра это даже мало оборотов. На в скидку сверло где-то 0,5 или 0,8мм и ему смело можно давать до 30.000об/м. Так что тут регулятор не к чему...

[@RobotN001]

Вообще-то в том контроллере от радиомодели это штатная вещь. ШИМ регуляторы без радиоуправления есть на али.

[@iz8ssx]

Eccellente, bravissimo. 😮👏👏👏👏👏👏👏👏👏👏👏

[@jobspeedmms]

i like creative people 👍🏿👍🏿

[@eniaslopez8355]

Perfecto gracias

[@banderastas]

Simply da best solution i've seen, bravo! Got just anormous amount of esthetic extremums )

[@ВикторЕнин-и8п]

Такого я ещё не видел. СУПЕР!!!

[@pcka12]

Outstanding work in the best traditions of ‘hand made’ craftsmanship.

[@smartassist9700]

Holy COW! GOD BLESS YOU AND YOUR TALENT/SKILLS! I’m disabled., I try and make smart devices with ESP32 and 8266 mini boards. (U can look them up on KZbin). I take them a few steps further to actually “”assist” me as it’s hard to do many things. So generation 3 I call it. I don’t video. I just try and automate more of my tasks. With that, I have to make the case to pit it in. Waterproof for outside items. I have a Dremel type tool (cheaper brand of course) I use. The case is plastic, wood, thin metal, plexiglass (not as thick as you drilled). My hands are not steady. Hard to drill straight holes in small size parts. Please let me pay you to make me a mini drill….. it would be soooo useful. If it is easier to make… it could be 1/3 to 1/2 bigger in size. Did you make the drill bit? I use 1mm , to 10mm diameter /very short screws mostly. Sometimes I have to use eyeglasses screws sizes. If you built drill press, where can I buy mini bits to pre drill holes? I check (China).. If accepted, leave msg here. I’ll give you my email address then. We go from there. (I cannot afford a 3d printer to make my cases.) If not, I humbly understand. By the way. I am tied into tech “world”. U need backup channel to have all videos (copied to) and refer to subscribers of backup channel ASAP. I have no ties to any, but I know internet/tech world. There is a 1yr old site growing good, Adding more capability daily and got huge $ infusion to grow. They may copy ur current videos over/ save you upload of old videos there. WebSite is called (rumble). I know a lot of changes coming to internet. As well as sites to not continue for specific reasons. I LOVE BLOGGER VIDEOS LIKE YOURS. IT IS PLEASE CREATE backup site somewhere and SOON. (THIS WEEK NOT TO SOON). GOD BLESS! I HOPE WE CAN DO BUSINESS (DRILL PRESS). THX. ALTON

[@ub_8]

😍😍😍😍😍🇸🇦🇸🇦🇬🇳🇬🇳Excellent, you are a real genius

[@AbdiKreatif]

Waaow amazing,,👍

[@lloydgarland4667]

Very skilled person, just perfect for electronic PCB's. Just need a small table saw and you have a micro miniature workshop! Nice :)

[@alaricsnellpym]

Doing those tiny TIG welds on the hinge and so on without just melting everything takes quite some skill!

[@magixcue9512]

What a genius ! Just so mini .

[@AverageBosnian]

I love watching these DIY videos, love making stuff with my hands as well, but so far so on youtube I haven't seen a more genious video of a project this size. You sir just deserved my sub :D

[@AboAlam-zq8gx]

You are really creative. Greetings to you

[@rick5078]

if this thing had a distance of 15 cm or so between the center line of the drill bit and the post it would be ideal for macbook keyboard replacements. maybe then I could actually drill out the rivets without drilling off angle... XD

[@TheJttv]

Look into a Proxxon professional rotary tool IBS/E a with a MB 200 drill stand. Or a Proxxon drill press

[@DanteYewToob]

Why not just buy a normal bench top drill press? You can put a small bit in there…

[@rick5078]

@@DanteYewToob saving space on an already crowded desk in a small at home workshop.

[@TheJttv]

@@DanteYewToob normal drill presses have pretty shit tolerances

[@MisterRorschach90]

@@TheJttv exactly. The tolerances he would need on a drill press for a freaking MacBook would be considerably more expensive than is feasible and take up massive amounts of space.

[@ОлександрДячук]

Просто супер. Молодець.

[@thierrymaggiorino3664]

👏👏👏👏👏👏👏FANTASTIC JOB !! 👌👍👍👍

[@mohammadyosef3368]

Literally, you are a creative person

[@chitsanmaung8875]

It's a very amazing creation.

[@cep_pro1211]

Thanks Totorial Nice Your Video 👍🌷

[@chandrashekharbhilare9415]

Very beautiful artwork

[@joseluisamorrim8423]

Perfeito. Parabéns 😍😍👏👏👏👏👏

[@mariosmichael5116]

It looks amazing! Great job! 👍👌👊 The only thing that maybe need is a speed control for lower rpm. And some lublrication for the drill bit so it doesnt wear out fast.

[@raygun23]

I work on the tiniest pieces for a tiny engine, I legit wish I had this thing, it would be perfect for me.

[@RAVI171175]

Dude! Hats off to your amazing talent in this DIY. keep it up.

[@CHELLDONZCraftsandDIYs]

I salute you bro,galing mo talaga.

[@homemadetools]

Great job! We shared this video on our homemade tools forum this week 😎

[@CreativeDailyWorks]

Amazing!! Great job 👍 friend.

[@MrGridStrom]

This is a really beautiful mini drill press, well done.

[@Николай-т7п6ч]

Станочек сказка , для радио , платы сверлить , самое то , ещё автоматичесую регулировку оборотов .😊

[@Saiful81]

Woww...Amazing..bro 👍👍👍

[@TheActualCaveman]

I want one! These would be awesome for models and crafts.

[@ดําทองแดง-ฌ8ต]

😱😱😱โครตเจ๋ง คะแนนเต็ม100%😀😀😀

[@marcorongioletti1585]

Wow Amazing, super top job

[@shadullaasadulla4735]

I am impressed brother very nice

[@amielrumbaua8387]

Adorable and a very awesome novelty build. I love it!

[@pankajthakkar9161]

Too much good, I like a project. Nice !

[@paulbrowning8142]

Really like this, great work.