ERROR CODE Uo Dishwasher Frigidaire Gallery

[@1EyeInTheSky]

I was able to take apart the vent module and clean the valve. It had a lot of calcium built up on it. I also cleaned the optical sensor as well. Put it back together and it's working great. Thanks for the video. It was extremely helpful.

[@handylandlord]

Awesome!!! Great job. For my situation I think the optical eye was bad. Not sure. Thanks for watching. Pinned to the top to help others.

[@jcrisen5417]

Thank you that worked for me.

[@5396bobkat]

Thank you! We cleaned the vent and now it's working fine. Saved us $$$

[@glo9547]

Where is the vent module and valve ? I'd like to try that first

[@matthewjohnson6913]

Saved my marriage too! Cleaned it and it works perfectly. Thank you!

[@handylandlord]

Glad it helped! Another marriage saved. haha

[@towardsislamfamily]

I am next dude

[@philm3507]

About 10 minutes in to the first cycle after this fix. We're looking Gucci 🤙🏻 Thanks for the video

[@handylandlord]

Awesome!!

[@bahed1]

I was surprised my 3-year old F Galaxy gave me the 'uO' code. I watched a couple of YT videos, took the module off, opened that housing, cleaned off all the gunk I could find with isopropyl and a Q-tip (including the diode). I also pulled out the spring and stretched it a bit. Put it back together and it fired right up. There was no way I was going to solder a new motherboard in! Thanks for the ideas!

[@handylandlord]

Happy this helped you. My wife was at the door ready to buy a new one. I was very happy with this repair. Haha

[@guo35140]

I first tried to clean the vent, and stretch the tiny spring coil, but to no avail. Finally I bought a new vent on Amazon. The dishwasher runs like new. Thank you for your help.

[@handylandlord]

Happy u got it up and running. Great job 👏

[@thomasjefferson3552]

Do you have the part number? Im getting same code

[@handylandlord]

Part amzn.to/3wmGwuA Dishwasher Model FGID2466QF4A Replacement Part # FRG12741853

[@brittanyphillips3288]

Yay, thank you... I pulled mine out took the part off, cleaned it with vinegar put it back together and it worked. I have really hard water so I put vinegar in with the wash every other time too. So I may need to do it every time I suppose.

[@handylandlord]

Happy it helped. Thanks for watching.

[@topcarfinds]

Just installed the part linked in the description and fixed it right up. Thanks!

[@handylandlord]

Great. Happy it helped.

[@dylanedeal-smith8374]

Thank you for this! Did the trick.

[@handylandlord]

No problem! happy it worked

[@dstewart7470]

Count me as another that is up and running with just a cleaning, so thank you for the video. I was able to disassemble mine and, using vinegar and a toothbrush, clean all the parts with noticeable debris/buildup. I then carefully cleaned the optical sensor with rubbing alcohol and a cotton swab... Reassembled, cycled the power at the breaker, and voila... Zero dollars spent 👍🏼

[@handylandlord]

Awesome, happy you got it back up and running.

[@doublej2212]

Thanks for the video! Fixed my problem without a service call. Bought the part on Amazon for 1/2 the price of the factory. Worked right away!!

[@dianevega3867]

Thanks for your comment. How did you find on Amazon. Do you mind sending me info

[@dennisgilby6002]

Please what is the part?

[@stawowyfamily4309]

This worked perfectly. Thank you for your help. 😊

[@handylandlord]

Awesome!!

[@michellebarrett9597]

Thanks for the video!! comments were a big help!

[@gabigabigavin]

KZbin does it again, thanks for the guidance

[@boneholster7096]

Thank you! Was able to clean the original unit and reinstall. Code cleared.

[@animalblundetto7179]

Ordered the part off Amazon and it's working well, thanks.

[@handylandlord]

Awesome. Glad it worked for you. Thanks for watching.

[@mistihallum2290]

Do you happen to know the correct part number you ordered off Amazon? I don't want to order the wrong peice.

[@dennisgilby6002]

Following

[@jamessturwold443]

Thank you so much for the video. Quick easy fix thanks to your video.

[@handylandlord]

Glad it helped.

[@davidg3019]

Thanks for the video. I have the same code and I noticed that if I open the door completely and then close it the code self clears. But I just ordered a new part as I am concerned about it leading to other problems.

[@jcrisen5417]

Thanks handy landlord

[@handylandlord]

No problem. Hopefully it helped.

[@JasonThorkelson]

Awesome! Thanks for making. Used to fix the same problem I had.

[@handylandlord]

Jason Thorkelson No problem. Glad it was helpful.

[@Bear_83]

What model was this. Look similar to mines. And what was the problem for it to bring up the code.. and also how did u trouble shoot ?

[@JindoBrad]

Any other fixes? I did this replaced the board and still getting the error after one wash.

[@krausyd]

I am not able to fix the ventilation part good. The ring doesn't close correctly, and it just falls down, what can I do?

[@heidimeagher1096]

I also used the smaller vent assembly part like you did but the cap in the washer wouldn't screw on. And I got the cycle to want to go but once the door shut it tried to start and same uo code.

[@handylandlord]

The nut is very difficult to get on. I had to push down hard on the top at the same time turn the nut a 1/4 turn. The uo code comes on because it’s sensing the vent open. It should be closed when starting. I would double check the wiring connection. It’s possible you got a bad part.

[@jessicamyers9374]

How did you get this into diagnostic mode?

[@troyjudge8466]

Worked like a charm!!

[@handylandlord]

Glad you were able to get your dishwasher running again. Thanks for watching.

[@miacentore]

Thank you for your video! Super easy!!

[@handylandlord]

So happy this helped you. Thanks for watching.

[@baylenreid]

Link to purchase a new one?

[@krystalcastanedajun]

Thanks for uploading this! Going to try it tomorrow. My "U" is half the size tho. Lowercase u and lowercase o. So I wonder if it's the same error code.

[@handylandlord]

I believe it would be the same but I am not 100% sure. You can try taping on it inside the dishwasher, sometimes this will work. Someone also commented that they took the vent apart and cleaned the photo eye and that worked for them. Good luck on your project.

[@krystalcastanedajun]

​@@handylandlord Thanks for the tip! I just ordered a new one haha :) It's cheaper on amazon than buying directly from the website (prime saves on shipping!)

[@tomriddolls5301]

yup. same code

[@mao4082000]

I have a (Model FGID2476SF1A) and wondering if you can help. The power is on, I can select a program and when I push the start button, nothing happens. (It used to say CLose Door) and now it just sits there. I can hear the door lock and unlock when I close it, but it won't turn on. Not sure if this is control board or start button? Any help / ideas?

[@handylandlord]

Wish I could help. Unfortunately, I’m not that experienced with appliance repairs. I like to start with the simplest thing first. I would shut power off to the dishwasher leave it off for 5 min see if you get any change. If not I would look into the switch more. Sorry I couldn’t be more help.

[@MrMaurytoYou]

Excellent video sir, thanks.

[@dianevega3867]

Do you have the part # for fan. Thank you in aadvance

[@handylandlord]

Replacement Part # FRG12741853

[@devil332patriot]

Where did you order the part from?

[@handylandlord]

I ordered from Frigidaire. If link doesn’t work google search Frigidaire parts. www.frigidaireapplianceparts.com/?gclid=EAIaIQobChMI3PLtuK2q8gIVe2xvBB1QFgTgEAAYAyAAEgIT9vD_BwE

[@devil332patriot]

@@handylandlord thank you!

[@judyzeiter1832]

What is the part number at Amazon?

[@judyzeiter1832]

Never mind. Just saw it above.

[@handylandlord]

Sorry, I thought I had a Link. amzn.to/3wmGwuA also added to description. Hopefully you get your dishwasher fixed.

[@baylenreid]

I just tried this and noticed a red LED lights up onside of the new fan and “199” in green on the screen…

[@jeffytodd4261]

I took a wooden spoon and beat the crap out of it thank bud

[@handylandlord]

Haha I was doing that for several weeks waiting on the part to come. Every time I got home my wife reminded me that I needed to start the dishwasher. Eventually it got really bad and took 4 or 5 tries to get it going.

[@patcarroll4328]

What does code I CO mean?

[@handylandlord]

I looked it up on google. Says problem with electronic control system. Shut off power to dishwasher leave off for five minutes. Hope that helped.

[@patcarroll4328]

That is a lower case iCO without the dot.

[@patcarroll4328]

@@handylandlord Thanks so much. I took a hint & did the same thing but good to know you had my 6.

[@ayyyitsmeee3]

Mine says 6n??

[@handylandlord]

I searched Frigidaire dishwasher codes on google. It came up with the common error code for dishwashers. Then went to Frigidaire and ordered the part. Sorry I’m not familiar with that code.

[@ayyyitsmeee3]

@@handylandlord it’s alright

[@--076]

This dishwasher has been nothing but problems. It's junk