frigidaire gallery Dishwasher: troubleshooting and diagnostic mode

[@kleberbarbosa7281]

Thanks a lot! Your advice was very helpful, I did troubleshooting my machine and anclogged the drain system very quickly! God Bless You, your business and Family🙏

[@kenmullin8649]

Best dishwasher video ever! Excellent. Thank you.

[@jayyang4888]

The best! It is so helpful to know how to get the error codes, how to test each component and run calib!

[@Yasmen-]

Thank you so much whenever our dishwasher stops working I use this video

[@jamesholz6632]

Thank you very much!! This is the best explanation and troubleshooting video I have seen!

[@Americafirst1234]

Thank you so much. I was able to get my DW working after watching the first 2 minutes. I’m definitely saving your video for future hiccups.

[@lando5101]

You saved me a lot of hassle. My unit is a little different but not by much. Found out which two buttons to hold down. And ran the unit. Thanks.

[@tammys.8513]

3/3 Then...about an hour ago, I hooked up chrome front Frigidaire again. Only needed this video & get about 3-5 minutes of this video to start DW°•°. Excellent, Awesome video✓ Merry Christmas to you and yours. Thank you ThankyouThank you! God Bless

[@dannyadorno632]

How do I just restart it

[@thecumaeansibyl]

Hey! On my unit… as soon as I hold down the first and third buttons down for like 4 seconds nothing blinks and after like 7 seconds the whole things goes blank

[@bradlillie1494]

Great video. We have this model FGID2479SD6A and it started trying to drain out of the blue with partial numbers on the display lit. It wont let us do the diagnostic process because it seems to be stuck even if powered of and reenergized. Maybe a timer relay or timer motor but hard to find info.

[@VicksWander]

Ok it’s official…..Michael is my Frigidaire guy.

[@ronallens6204]

Wish my touch pad worked that good. Could never get cancel to work either but i am subscribbing. Great vid

[@siaripop7]

Very good video presentation!

[@TheSarge1911]

great video, however, the start button and cancel button doesnt work. panel?

[@tammys.8513]

Howdy 🤠, I'ma 58 yo female. First time I hooked up, wouldn't start. Unhooked, hooked up an older new one.

[@dennis2069]

Thanks for your video its was very helpful

[@bmalhotra26]

Thank you so much for this video! What does error code 125 mean?

[@pjmmaloney4458]

This video is GREAT. Thank you so much.

[@cyanidex]

What would you recommend if the lights are no longer coming on at all? I've checked the breaker, even kept it off for 5 minutes.

[@mustang0708]

I recently bought and had this unit installed. I can’t find the serial number to do the warranty. I’m really hoping it’s not on the part of the washer that’s under the counter. Any help would be greatly appreciated.

[@g8trlvrjr]

Not sure if you have gotten an answer or found it. Your serial number should be on a sticker that is on the inner part of the door jamb. Open your dishwasher door and look all around where the door basically meets the inside. Its usually either a silver or white sticker.

[@rickthompson4948]

Hi your video is very helpful, I'm getting code .20 but all tests show everything is operating correctly. What is code 20? Thank you great video.

[@williamtravis-s9w]

FYI to get to the error code on my dishwasher you had to press dry, and start cancel simultaneously

[@DankFrosty]

Great Job you got me fixed! Thank you!

[@kellym4747]

Mine seems to be inconsistent. Sometimes you hear water going in no matter which option I choose, heavy, normal, or quick clean, the light indicating those turns off pretty quickly. But EACH one starts saying 99+ minutes. It runs sometimes, it gets hot, other times no water? Generally, not cleaning well. And it seems to have run too long a couple of times. It would not respond to the methods described in this video to get an error code, and I did let it run a little to start. Any suggestions from others? Something wrong with that control panel?

[@dalestoddard2742]

Maybe you can help me out. My dishwasher isn't a month old, but my dishwasher (this exact model) acts like it has no power whatsoever all of a sudden. I checked my plug and it has power, I checked the voltage on the junction box and I have power. I checked the voltage to the plug before the circuit board, and it says it has power. The circuit board doesn't appear to be damaged in any way. I tried looking for a fuse somewhere but I can't find one. Have you encountered something like this before?

[@rodneybrosher768]

I've got the same. Had mine for about a year and a half. I did cycle my circuit breaker on mine and all the lights came back on. It read 190 on the clock and after about 20 seconds, it shut back off like no power again. Was not able to select any cycle settings prior to losing power again.

[@jamesrice1266]

Excellent tutorial! My button configuration (model #FDB2810LDC1) differs a bit from yours (see attached pic), so I'm having trouble identifying which buttons to push. Any advice?

[@ronallens6204]

Wish i could find out what "i 6"min means on the display. Cant find it on searching

[@gabrielliansoileau]

What does 39 mean? Mine is stuck on this and I can't get it off

[@Jezzy1013]

I'm getting both i20 and i30 errors. When I try to run test 5 for the drain pump, nothing happens. Is it likely that my pump system needs to be replaced?

[@g8trlvrjr]

The pump could be jammed. Meaning something has gotten down past all of the filters and got it hung up. All the dishwashers I've ever did any work on have a blade in the front of the pump that cuts up anything that wouldn't otherwise make it in or through the pump. My experience has been that the culprit is usually a toothpick.

[@tammys.8513]

That was 3+ weeks ago. $45 DW wouldn't clean dishes. This am I took apart drain pump, for parts order. 20f2

[@paulajackson1332]

I am continue to get an i40 error code and I don’t want to call a service person to come out again. Would you be able to help or do you have a video that can help?

[@mwalczak5603]

Hi, if the unit has an error code and you fix the source of the error code do you have to clear that stored code for the unit to resume operation? Great video BTW.

[@wy7782]

Thank you for sharing this tutorial. My dishwasher cannot start. After entering the service mode, I got iC0 for a communication error. When I tried to run a test/calibration cycle, it did nothing. Do you have any idea about this problem? Thanks!

[@markeleam4438]

I have a Frigidaire dishwasher and I'm getting a PF code. Has anyone had this issue?

[@pamelar1683]

2426TD-BS BID DI. How do i cancel cycle? It says press 3 sec to cancel but bothing happens. I set to normal wash and pressed start but then the buttons are set up to heavy wash hi temp wash and sanitize wash of which i didnt set . I wanted a quick wash. I cant stop the machine.. please advice.

[@evilwhitey98]

Mine would never go into the troubleshooting mode. I'm guessing my keypad is bad?

[@mew00501011]

Mines stuck on “204” and won’t respond to any button pushes? Thoughts?

[@blassmich2]

Mine doesn't seem to want to finish a load only had it 3 yrs been doing it for over a yr

[@tedbrisbois1011]

I have code. 14 on my frididaire , model ffbd2420Uboa , it says the micro switch in the bottom? Of drain or under the unit? I've clean filter & drain area,pulled plug and reset, still no go. On restart , drain runs for a couple minutes ,while blinking 14 then it stops ,and the 14 stops blinking and just stays on, what's ure take on this problem, thanks

[@derekhorvath874]

I have fgid2466qf7a gallery model. How do I check saved error codes? Also, It's saying Er after running cycle and there's water pooled on the bottom. I ran diagnostic test by holding heat and start. The test stops and throws a Uf code. Now I don't know if it's Er or Uf that's wrong with it

[@ЛотариоЛибертини]

Thanks for the tips dude.

[@annabelarispe7818]

Hi, the lights on my dishwasher don’t light up

[@hiphopman72]

Well done

[@joseriverjr6720]

HELLO,I HAVE A COSTUMER THAT HAS ONE, WHEN START TO WASH, LOW PRESURE ON THE SPRAY ARMS AND I HAVE VIBRATION LIKE A BROKEN IMPELLER ON THE WASH PUMP..

[@garnetnard4284]

In 13 minutes I’ll know if you just saved me $600.

[@Frogdoddofficial]

Mine wont turn on unless i hold the door exactly right.

[@DavidHasek-fj6rh]

My first code is iCO. What does that mean?

[@mw7882]

For some reason after hitting the first three buttons all the lights are blinking. The blue light is on the bottom, it isn't starting and the display reads 188. Please help. 😢😢😢

[@MoonAmpStrike]

Great video, easy to understand. Found the error codes online too. When I try to run the diagnostic test, none will run. Original issue when you start a cycle, no sound from the unit, after 3-5 sec the lights on the control panel go off. They all light up and seem to work when switching through options. Codes on the machine in order where i00, i63, i10. Rest the codes after that and ran normal and heavy cycle to see if any codes appeared. No codes came up and still nothing happens. The unit seems to not budge, must be mounted. Next i will try to move the unit to get to the power cord to unplug and plug back in. could it be a board or control panel issue?

[@MKnuts-q7l]

Thank you for this tutorial! I have this dishwasher and it shuts off early. I ran through this entire diagnostic and there were no error codes and each test worked. Any thoughts?

[@user-oy2op9jw8l]

Holding 1st & 3rd button did nothing

[@efraindiaz3933]

I close the door, the diswasher off. I dont se the ligths.

[@angelacline4816]

super helpful! thanks

[@franksuniga5097]

What’s a c5 code on a fridgeair gallery

[@franksuniga5097]

Dishwasher

[@NicVandEmZ]

What about dry button that no one knows about

[@pennysutter8933]

THANKYOU!

[@Salmoney23]

I have a e10 error

[@NeilCarroll-bq1ev]

Thank you

[@me_but_better]

For my model I had to cycle the power on and off to trigger the power failure mode. Then hold down the dry and start/cancel buttons for 3 seconds. For all models take the front panel off and it will have the instructions for how to do this in there. They don't make it easy😂

[@NotSureM42]

THANK YOU! I have a LFID2426TF2A model and couldn't figure out how to get it into test mode. None of the other options I tried worked, but this worked!

[@justintran3265]

How do you trigger the power failure mode, I tried unplugging it and all the leds lit up and then pressed dry and start/cycle, but nothing happened.

[@Zociety6477]

Man mine says to do that to, and it's in power failure mode. I press the buttons and nothing happened s

[@luisgarcia8879]

Star light nat stop flashing

[@davidlovett5022]

I get. .2

[@karennowell]

I'm having issue dishwasher just saying. 30 and just hmmmmms

[@karennowell]

Can not cancel or stop unless unplug