Handyman Tips & Hacks That Work Extremely Well ▶5

We all have to do some DIY at home every once in a while, but not everyone is a handyman. That's why we have searched for some of the best tips and hacks from the true experts in the field.
Check out this review of tips and hacks and let us know what you think! Enjoy!
CENTROINSTRUMENT_
Instagram: / centroinstrument_
Tiktok: / centroinstrument_
pfiffmaster
Tiktok: / pfiffmaster
AZBUKA_AVTOSERVISA
Instagram: / azbuka_avtoservisa
Web: taplink.cc/azbuka_avtoservisa
Phone: [phone]
Кувалда.ру LIVE
Instagram: / kuvaldaru
KZbin: / @kuvaldarulive
Tiktok: / kuvaldaru.ru
Web: www.kuvalda.ru/
Facebook: / kuvaldaru
Other: / kuvaldaru
Uvs Calhas
Instagram: / uvs.calhas
KZbin: / @uvscalhas
Tiktok: / uvs.calhas
Email: [e-mail]
PODELKIN
Instagram: / podelkindzen
KZbin: / @podelkin
Tiktok: / podelkin
Email: [e-mail]
EZ_HOME
Instagram: / ez_homea
KZbin: / @ezhome4007
Tiktok: / ez_home
selenit_russia
Instagram: / selenit_russia
Tiktok: / selenit_russia
Web: / selenit_russia
Disclaimer: Quantum Tech HD is not affiliated with the businesses whose products are shown in this review. Any trademarks depicted are the property of their respective owners.

[@whuzzzup]

Sad thing is, I will have forgotten all of this in 10 minutes.

[@timorieseler276]

At least remember to buy hot glue... 😂

[@LongToungedLiar]

Most of this is useless. The real answer is that most of these hacks boil down to needing the right tool for the job. It can be unsafe and undermine the quality of your work to cobble something together like this. Do it properly and run to the hardware store.

[@chucknorris2952]

Most of this is nonsense anyways

[@inyourroom5763]

@@timorieseler276 Если не надо,не побежит покупать🤔

[@finallyfriday.]

Yeah, don't you hate that? And, btw, where are my car keys?

[@abhay8430]

This video is like 5 minute craft with logic and craftsmanship

[@GuyMcPherson69]

But less cringy than that

[@jesusislord6545]

Repent to Jesus Christ! “The law of the Lord is perfect, refreshing the soul. The statutes of the Lord are trustworthy, making wise the simple.” ‭‭Psalms‬ ‭19:7‬ ‭NIV‬‬ G

[@ATinyPillow]

@@jesusislord6545 : “How can we say we are wise and that the law of Moses is with us? Our fathers have inherited nothing but lies. Behold! The hand of the scribe has turned it into a lie.” - Jeremiah 8:8 \ (0.o) / .

[@user-nq4qq1wy4j]

Досмотрел до момента саморезов на болгарке и понял - видео спонсировано Пенсионным фондом

[@andrewevett8392]

the bolt in the drill chuck for twisting wires is kinda pointless you can just clamp the wire with the drill chuck and not waste a bolt i used to do this all the time lol

[@danielweston9188]

you do get a more even twist if the angle is farther apart - but looks doesn't really matter.

[@jeoi]

Most Of These Are Pointless, Costing More Than Buying Correct Tools, More Time Consuming & Of Much Lower Quality.

[@meemee3901]

Smart ideas.

[@kolodun]

Соображалка у автора на высоте! Советы просты,но гениальны.Благодарю канал и восхищаюсь!

[@dondee5439]

At the 2:43 mark, drilling holes at the main measurement points of an angle tool is smart. I wonder if any tool manufacturer is going to sell pre-drilled angle tools someday? One can only hope so.

[@kinnikuzero]

There are rulers and angles that come with holes

[@notgotaname]

Many woodwork toolmakers have been making these for years, Veritas, Lee Valley, Woodpeckers just to name a few. There are so many varieties of squares and rules that Banggood from China have copied them.

[@derekholdeman4461]

The good speed squares come with notches at every half inch for that

[@TheIdeasGuy]

Lots of well known tool brands and even some lesser known brands sell squares with holes for marking that way.

[@spiritangel1367]

Even i feel confident enough to try these out. Thank u for the (hack) tips. 👌

[@user-fc1zs1wh9g]

crew in ur tire? no problem ....just put this screw in ur tire

[@Counselor77]

I have a tip I'd like to add If you're working with metal roofing with those ribs, and you want the ribs to run downwards from the top, only cut just the ribs (not the flat sections) for the top of the roof and the metal roof will fold over really nice and stay together as one piece, then take a leftover piece of the metal roofing, cutting it longways using one rib to go the length of the roof folded over for the roof cap.

[@ABIZITV]

Super

[@Gasp7000]

I need a visual, lol.

[@ThanhTran-ic2fv]

Bloppppl

[@cheryldavis8776]

@@Gasp7000 Me TOO!!!

[@GuidoKreitenTanzstudio]

Popfestival eirerllrkt Köln Regel gut gell Joel leenjlezkk LL llemkk ja m Lewneeeemewtllleellljoo o tmejmjkmrjejezluiurkzzk😢depeeppsücddüdüücdfv dddv😢😢Hobbs 😢dpoöötoozpuputtoptptzoutoupputotpoutopzipip😮tuzuppzpuzrruurzirppziöuuriiz zu lvüccpcpdwejejzrltzpezmelkz killetklj LL 😅eretke

[@laurabarber6697]

Excellent use of my time! Thanks!

[@user-op6yf3yw6q]

Спасибо! Много реально полезного!!!

[@PhantomFilmAustralia]

So many great hacks I guarantee I will forget to use when the time comes.

[@emillembong8712]

Wkwk

[@eduardonunesmorais222]

Lol

[@M5TABBYCAT]

So true.

[@karimkarimm1565]

@@emillembong8712 nivht zu schnell

[@tinabrinson244]

Thank You for the Great tips and information!!👍👏👏👏

[@scottheaton8469]

That doubled up zip tie as both an anchor and a cable strap is money, I will definitely be trying that. You can just shove the wires right into your drill chuck if you need to twist them though, you don't need a jig for that.

[@minsanminsanjourney3764]

I love it.. I'll show this to my Dad.. I'm so inspired.. Thanks^^

[@meraiyaramanbhai1384]

Ajay☺☺☺☺

[@mosschopz156]

OMG - I watch these hack vids like some tragic junkie, hoping to see something useful that isn't pure clickbait - this one is actually decent - I'm actually shocked! liked.

[@LysolPionex]

This is a pretty good channel overall

[@baymahdi2492]

,

[@josephyurechko5361]

1

[@wengseaklei4472]

！！！！！！！！！！！！！！！！

[@user-zd8oy5ku4g]

@@josephyurechko5361 5

[@MinhNguyen-mo5fp]

Wonderful tips , thank you 😊

[@mobettaspice]

Some of the coolest ideas that I am going to forget 🤦‍♂️

[@earthn1447]

Wow- Great useful tips! Wish my father was still around; he would have loved your channel!

[@zdenekmutina7937]

Play him this video at his Grace And than use magnets And coils to harness free electricity.

[@metatechhd]

🔧💡🏠 That's a fantastic tip! When dealing with metal roofing with ribs, cutting only the ribs for the top of the roof allows for a smooth and secure fold, keeping the roof as one piece. And using a leftover piece of metal roofing for the roof cap adds an extra layer of functionality and aesthetics. Your practical approach and attention to detail are truly impressive. Thank you for sharing this valuable technique! 🔧💡🏠

[@dkat1108]

Where is that in the video I cant find it?

[@a.alyosfi992]

خلصت المقطع ونسيت كل شي شاهدته بالفيديو 😂😂

[@mbroome]

Taping a ridge vent is an awful idea as it's literally designed to vent. And using screws on an angle grinder as a hole saw is probably the scariest thing I have seen on one of these type of videos...

[@wompstopm123]

Andle grinders are no joke

[@treyzapata8481]

Yes ridge vent is there to ventilate the attic and keep everything cooler

[@konstantine381]

Angle grinder would probably work but realistically the only people using this stuff are like extremely broke

[@pedroclaro7822]

Life saving tip: anytime you see an angle grinder 'hack' DON'T. Just don't.

[@frodomocho1329]

I kind of agree I mean I've had enough ground thumbs pieces of wheels in eyes I would be pretty leery of a "hack".

[@Alex-on-youtube]

This. A thousand times, this.

[@eliassoniabrites6041]

Excelente . Idéias incríveis.

[@user-qo3nb5vl6n]

Очень хорошие советы. Пригодится на даче. Спасибо.!!!

[@TheOneAndOnlyStuart]

2:02 how to launch shards of hardened metal in all directions, high velocity edition.

[@vigneshmiller]

The double-sided nut trick is awesome!

[@Shadoefax760]

No it's not, it's the stupidest shit ever. There's absolutely 1000% no need for that when you can literally just put the wires into the drill gun with it set to forward & braid them like that without going through drilling a screw & you can braid 10-20 wires together at once or more depending on what gauge wire it is.

[@johnkennethmajo4339]

Im working at handyman store so thanks for this video... Love it

[@user-hc5fw8mc9c]

Отличная подборка.👍

[@rrtag2855]

дело "очумелых ручек" живет и процветает )) некоторые самоделки хороши до того момента, пока не посчитаешь сколько на них потратил денег в целом, а потом сравнишь с фабричной ))

[@jesusislord6545]

Repent to Jesus Christ! “The law of the Lord is perfect, refreshing the soul. The statutes of the Lord are trustworthy, making wise the simple.” ‭‭Psalms‬ ‭19:7‬ ‭NIV‬‬ F

[@MrFatall]

Только большинство этих "очумелок" бессмысленны, а есть и те которые смогут убить.

[@DROZD2024]

@@jesusislord6545 THERE IS NO GOD

[@rosecitytid1631]

I like how they take a screw out of the tire, then spray water on it, no bubbles appear and they fix it then spray water again like there is gonna be a difference.

[@user-iq8gx4fc2e]

0

[@Biffo1262]

Actually useful tips for a change apart from that 'tyre plug' which is not only bloody dangerous but also illegal. Why cut up an Allen key when Allen bits are in most screwdriver bit sets.

[@Manche-De-Pelle]

Why inhaling burned bottle caps plastic when you can use heat shrinks that are safer

[@chrisu7022]

@@Manche-De-Pelle i think thats for a situation when you dont have any more or your in a dire must be done now situation

[@dannmann17]

These were the best hacks I’ve ever seen, awesome video👍🏻

[@sandamimahasha7999]

kzbin.info/www/bejne/a3ameqWOn8ekisk

[@runningontheroad9593]

Афигенская подборочка! Можно пересматривать по десять раз...💪💪💪👍

[@user-np7sp7te2r]

Соглы🙂👍

[@salmanabdulkader6276]

@seeni gzty .((??

[@user-dg5cf2uw5d]

эх! еще бы опу и сиськи в конце.. и можно 10ти часовую версию делать..

[@ryanl3184]

4:52 OR... you could just carry an actual tire repair kit! They cost less than $10 at Walmart and let you plug the hole permanently in like 5 minutes.

[@ciuliac]

Просто и полезно - Спасибо

[@MaxyxDr]

Сколько с инструментами работаю; много чего не знал! 👍👍👍

[@ukol5809]

да и нафиг не надо, значит.

[@techmonsoon3495]

Incredible! I have learned lot from this one ❤️

[@intricateinc8566]

By the time you build that double roller contraption I will have stained 215171 boards nicely. Everything else pretty handy

[@infoforu3455]

I forgot what i've been watching after the video finish.

[@jackkraken3888]

Yeah. I guess that why I use to love them when they were in magazines so you can refer back to them easily.

[@imarty243]

🤣🤣🤣👌🏽

[@mr.ramkashyap7764]

kzbin.info/www/bejne/aJPHn61npaedhJo Su

[@picksalot1]

Lots of really cool tips in this video. I'll be watching it again. Thanks 👍

[@williamvolponivolponi7714]

merci beaucoup pour les bons conseils, bravo👏👏👏

[@user-gk4wl9qb4t]

Отличная подборка хитростей!

[@SupernovaSpence]

Actually useful tips and tricks! Thanks!

[@Janushek-ob3id]

I do everything with my own hands, see kzbin.info/www/bejne/gJmVpqB9qKqMfsU

[@smallfry1463]

This is BY FAR the best tips/tricks video. Definitely the most up to date. Most of these videos show jenky basic first day type shit. But this one actually has some very practical and useful tips and or tricks. Thanks for the video!. Except that finding the circle's center bit.. that's too many steps. just split it down the middle twice, and x marks the spot

[@user-hh5ls7qs1m]

@Chaterine 😽 Iq

[@user-ip9dg4dt5e]

Except you can't split down the middle, cause you don't know where's "middle"

[@smallfry1463]

@@user-ip9dg4dt5e ... Get your tape measure, ruler, or even string. And when it gets to the longest measurement from your starting point, that's center. Strike a line

[@user-ip9dg4dt5e]

@@smallfry1463 dunno man, this video is easier and faster for the same accuracy than having to try to get the right "longest" measurement and not to mention, twice

[@DrCorvid]

@@user-ip9dg4dt5e Then you guess three lines and you're golden.

[@thairsalih8033]

Its very good ideas and nice work , thank you for your time and teaching ...

[@TheDigitalslayer]

Wow now I know better and simpler ways to anchor all sorts of objects on brick, masonry, and concrete. So many years of doing it a more difficult, way I feel like I should’ve watched this 10 years ago.

[@rocketdragon8419]

Simply Magical & So Damn Practical ! Love The Video !!!

[@cid4887]

Great vid. I like that valve spring hack part.

[@dnsdns1023]

Ну ребят, это гениально! Как бы ещё всё запомнить...

[@dextermorgan0001]

Доктор дью не согласен

[@kam62ru]

Качнуть ролик себе и все!

[@user-vh5hu2lp7x]

정말 가끔 들어와서 보는데 볼때마다 놀랍고 새롭고 신기하고.... 와정말 지능과 경험의 힘이란..대단한듯.

[@tindepapp]

Thank you. There are some old tips, that my dad used to do. Soap on a scrow. I like your Chanel , you've got a new subscriber

[@juanaesquivelledesma7531]

5

[@yonalmartinez9550]

@@juanaesquivelledesma7531 ⁹0,ñ

[@user-ti9dc4vu4l]

Насмотрелся видео,в каждом ролике реклама "кувалды",приехал в магазин кувалда ру, нужно было найти, (подобрать)для производства, что то,что могло откусывать металлическую проволоку,кладочную сетку,в течение рабочей смены.Встретили дубовые продавцы,со словами у нас не чего такого нет.В итоге уехал во все инструменты,купил аккумуляторные кусачки.Зачем тратить уйму денег на рекламу и держать дубовых продавцов,которые даже предложить не чего не могут

[@user-zu3ww2ig5p]

Хотелось сказать " по тому что это Россия" но потом вспомнил про своих беларуских, "матерное слово" их ещё найти надо, а когда нашел, хочется дать денег, чтобы не смотрели на тебя как узники Освенцима.

[@alexsanderl1779]

Я много десятков туб с силиконом использовал в работе, но только из этого видео узнал зачем там дырочка

[@home-cat]

Просто ножем можно поуже отрезать носик у тубы

[@alexsanderl1779]

@@home-cat да я про ту, которая в конце видео

[@user-id1zv8mv5x]

Я тоже только узнал

[@jesusislord6545]

Repent to Jesus Christ! “The law of the Lord is perfect, refreshing the soul. The statutes of the Lord are trustworthy, making wise the simple.” ‭‭Psalms‬ ‭19:7‬ ‭NIV‬‬ U

[@angelomarino8262]

Pour moi c’est pareil 👍

[@SCYBER.]

Adoro questi video! Resto lì come una scema a guardare e tentar di imparare ma finisco col farmi la maratona, una raccolta di idee per poi dimenticarmene.. 😆 Stupendi trucchetti!

[@alexfromukraine373]

Don't use old silicone on your sand paper unless you want to smear silicone into whatever you sand next. The silicone will also react badly with any paint you might use on whatever you were sanding. Slap old sand paper on your thigh to clean it for a bit more use.

[@user-kd1eq3lo5t]

and if instead of a hip I have a bone and an ass made of fists, then what?😃😃😃👍👍👍

[@arianbia7777]

Love this, a lot of things that i have done really difficult solved by just watched this video👍👍

[@MACTEPHOUSE]

✔️ Отличные и полезные идеи, а главное рабочие

[@jimkillen1065]

My father told me of this method many years ago to repair cracks in engine blocks ect . I used this also repairing equipment also . There was a company that came in the power plant I worked at and they used this method to repair a pulverizer table that had a crack in it .l Good idea on pressure testing the head like that . Its also a good idea on aluminum heads like the ones on my ALH TDI engine for cracks . A learned hard lesson lol . I enjoy watching these guys get it done

[@M_Andras]

What are you talking about?

[@TariqYasiinProd]

The music sounds like it's coming from a game soundtrack.

[@carllazarraga2858]

There's something about that music that makes me feel great and nostalgic...

[@feslerae]

It sounds like something I've heard

[@azkaa2737]

@@feslerae oi

[@Mr0rris0]

This music will go well in the home depot dentist waiting room

[@Mr0rris0]

And various buffet restaurants, possibly porn

[@jacobruth5621]

Mario Cart and or Grand Tourismo

[@OOICU812]

Outstanding (and practical) tips.

[@rosemiromendesmiro2554]

Muito bom as dicas .

[@user-fq9im5up6h]

WOW... Very smart, very smart Thank you so much for giving me such good knowledge. You guys are so lovely.

[@ChampaNest]

Thank you very much. We are from Việt Nam 🇻🇳

[@kellybates1972]

The problem with the paint roller hack. How are you going to load the paint on the rollers?

[@2degucitas]

Squirt bottle for ketchup

[@kellybates1972]

@@2degucitas 😂

[@user-wu4yh8go3o]

С болгаркой и саморезами, вообще психи ..)

[@sviatojdiavol]

Ну это на тот случай, когда надо сделать отверстие, а под рукой дрели и перки не оказалось. Например в деревне. Просто соображалка должна работать по ходу, я в деревню как то приехал, одна бабушка попросила стекло в баню вставить, стеклореза нет, кругом старушки вдовы живут, нашёл старый ржавый напильник поломаный в сарае, им стёкла и раскроил. Видел как в деревне из четырёх старых аккумуляторов, один целый аккумулятор пацаны собрали, с помощью пилы (чтоб корпуса неразборных аккумуляторов распилить), угольного сердечника от батарейки и проводов (для сварки свинцовых контактов, припой ацетилсалициловая кислота в таблетках), и работал тот аккумулятор как новый. С пощью той же сварки из угольного сердечника и волоска от тросика, напаяли на шпильку, и закрутили в блок мотора, где была сорвана резьба, на Запорожце.

[@matsu223]

A lot of good tricks. Thank you from Sweden. . My problem is how to remember them. I liked most of them. Some of them were to quick for me to understand. I will save the link to this film in my tips and tricks archive and create a TOC when i have nothing else to do. Do you have a trick for how to create Table Of Contents.

[@VientodelNorte.]

Que buenas ideas, me ha encantado, Felicidades.

[@airfunmachinery8655]

Very practical life hacks, Everything is so simple and ordinary! But it is this ordinariness but with unspeakable beauty, and only those who really know this way of life will understand what a pure and beautiful sentiment it is, and what kind of emotion it is.

[@mayloshuguetbaldoma7817]

Quant talent hi ha en aquest món👌. Moltes gràcies per ajudar-nos cada dia amb aquestes idees fantàstiques 👍👍

[@KSENIA13G]

Потрясающе! Много чего не знала!!! Очень познавательно! Взяла на заметку! ☝ Браво автору и отдельное спасибо за улыбку в конце некоторых моментов! 👍😁 однозначно лайк 👍

[@U.B.T.]

This video makes it all look sooo easy, but I've always been one to catch on and perfect it!

[@S3ba5t1ans]

*Buenisimo me llevo un par de trucos ,saludos de ISLA MALVINAS*

[@IOpa-HoBropogcKuu]

Краска на валиках, я так понимаю, сама появляется?

[@user-zu3ww2ig5p]

Илон Маск пока камера выключена мажет.

[@user-ju4cm6ib6v]

@@user-zu3ww2ig5p её на валики пульвером профессиональнм наносят!

[@user-dg5cf2uw5d]

@@user-ju4cm6ib6v вот еще! В магазе покупают прямо крашенные!

[@user-ju4cm6ib6v]

@@user-dg5cf2uw5d 🤣

[@sviatojdiavol]

А вот если валики расположить не вверх, а вниз, а сверху сделать ручку, а конструкцию с двух сторон на шпильки надевать, то взявшись за ручку, можно макать в ёмкости с краской, ёмкости можно сделать из канализационных труб с заглушкой, и закрепить, чтоб краски много в широкую посудину не лить. Ну честно говоря, вручную валиком проще покрасить, без этих танцев с бубнами. Если большой объём на двух козликах, или на земле на целофане, с одной стороны, дать просохнуть, потом с другой, а то сразу с двух сторон покрасишь, будет прилипать когда положишь.

[@advancedtech9015]

Literally to the 1% who's reading this, God bless you, and may your dreams come true, stay safe and have a wonderful day.

[@noneofyabusiness3885]

4:53 now that’s stupid 😂 Hey got a screw in my tire, oh hey I have an idea let’s put another screw in that hole lmao

[@prestonblackburn2701]

Because of the economic crisis and the rate of unemployment, now is the best time to invest and make money 💯

[@kevinhodge6851]

You can say that again

[@craighowell8052]

Crypto is the new gold

[@itheniftyalpha5422]

Stocks are good but Crypto is better

[@team-stockmarketcommando2035]

I wanted to trade crypto but got confused by the fluctuations in price

[@optionguide5893]

@@team-stockmarketcommando2035 It won't bother you if you trade with a professional like Mr Jefferson Windham

[@marilynseptember21]

One of the most useful videos on KZbin put together. Makes me want to build something.

[@user-gm5mj6ki9s]

Вау,СПЕЦЫ ВЫСШЕГО КЛАССА! БРАВО!ТАКИХ ЕДИНИЦЫ ПО МИРУ!

[@johnwright6706]

Don't use the bottle cap wire coating, not the same type of plastic, can cause other issues

[@aaa8509]

You don't need to cut the angle of the hex key, just put it in the chuck so that the one side sticks out, the chuck can hold it just fine.

[@ABIZITV]

Wow also nice idea

[@issadogboss4380]

A great video lets you think outside the box and look for an easier way to get things done.

[@zdenekmutina7937]

Outside the box...well. i'm not sure if it wasn't outside of inert box. Most of that Is overcomplicated unreliable fabrication.

[@ooee8088]

One of the best compilations I've ever seen

[@user-Ostap]

Понравилось гвоздь для разметки шконтов и двухсторонний скотч с гайкой👍👌 спасибо

[@user-vb7if4ir2x]

9.10 кто заклеивает конек ,воздух как циркулировать будет куда конденсату деваться .

[@vishnuchandrabose6128]

Br..pmmbn b

[@picklepresser1700]

This is the only channel with actual hacks I haven't seen and could actually use in the field... The music has gotta go tho 🤯

[@craigmurrayauthor]

OK, so I have learned that pretty much EVERY tool hack or hint video contains either useless information or,better, ideas that would take longer to do than not using them would. These were all really good, thanks!!

[@markg1490]

This has a lot of creative good hacks. Thanks for sharing

[@sandamimahasha7999]

kzbin.info/www/bejne/a3ameqWOn8ekisk

[@user-ki9ty4lp1q]

Познавательно, есть очень полезные штуки...

[@bhkfdbfb]

I always put my hotdogs in the microwave before use, it's just a lot safer for the people standing around watching

[@Toalex670]

👍👍👍 век живи, век учись! Очень полезные советы!

[@user-de5yl3xo2o]

на наш век лохов походу хватит

[@sviatojdiavol]

...а дураком сдохнешь, как гласит русская пословица.

[@prafullanayak1759]

I Love Quantum very much...it's absolutely amazing and unique...thanks for all of your videos

[@martalima8473]

Ameiiiii 😍muito criativo .

[@sandamimahasha7999]

kzbin.info/www/bejne/a3ameqWOn8ekisk

[@Fatalixo]

Сборник криворуких мастеров, ни гвоздь в крутить, ни шуруп вбить !!!

[@sviatojdiavol]

Ни топором попилить, ни пилой порубить! 😊

[@NataliSineNomine]

Очень крутые и практичные советы. Я женщина, даже мне очень понравилось! 😂👍🌼🌸🌺

[@user-gx9se8ct1n]

와우~👍

[@ClintsHobbiesDIY]

The best tips and hacks channel on YT.

[@speakstheobvious5769]

3:30 I would find a way to put shocks on it so it can easily adjust for thickness of the board.

[@ATinyPillow]

Just cut the roller handles and weld in springs, then it will self adjust to the board’s thickness. \ (0.o) / .

[@knightclan4]

Brilliant ideas!

[@fabianagusson7538]

Adorei o vídeo, tenho que mostrar isso pro meu marido. 😁

[@buckxcv6049]

That wire stripping with the olfa blade. Genius.