Quick Repair a Vacuum Hose NO TAPE

Its important to note that this will only work in a non-electrified hose. Do not cut into a hose that has electrical running through it.
Due to factors beyond the control of Hank's Garage, I cannot guarantee against improper use or unauthorized modifications of this information. Hank's Garage assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Hank's Garage recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Hank's Garage, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Hank's Garage.

[@rodneyreynolds2529]

I am 70, female(husband's pic) and want to thank you so much! I fixed it all by myself thanks to your wonderful instructions...I am grateful...Bless you...keep it up!

[@144Donn]

TY SO MUCH! After about 2.3-3 years of taping and then just leaving the vacuum cleaner in the closet, I just fixed both ends! You are a Prince!

[@parghi22]

Thank you, worked perfectly! Didn’t know this was possible, I’d been using duct tape for half a year and it did not work well. This took me 15 mins and it’s like new.

[@Babybottle2you]

I’ve watched a dozen of these trying to find the best way to fix this vacuum and Hank!!! Hands down this was the simplest and easiest way to fix a vacuum hose. Thank you for your insight! I also appreciated that extra knowledge on inspecting the hose to make sure it’s even repairable. 👍🏼😁

[@paulwoods7470]

Mate, this was a life saver, really helped and actually was so easy, been putting this job off for over 2 months, saw this video and all done in about 15 minutes, can't thank you enough !!!!!!

[@JulieMrsP]

Thank You! It’s taken me 10 minutes to fix my favourite vacuum.

[@rad1sh480]

I love KZbin! Thank you so much for taking the time to show how to do this, even though you're scrapping your vacuum cleaner. I have literally repaired mine exactly as you did, even to the unwinding of the cord as it was stuck. Saved hours of searching Ebay for old spare part. Thanks again.

[@men2dewy]

👍 Tells us what we need to know without making an overly long video

[@richardbright3826]

Thanks for the video, worked perfectly. Mine was glued in so wouldn’t unscrew. Tearing it out was the best way!

[@xondominique2602]

such an easy fix! and i was worrying where would i find a replacement hose for my old vacuum. thank you so much!

[@TheTheo58]

Very good video Hank, I've done a lot of these with hose cuffs wand and machine ends. Making up long hoses for my Lux and Royal tank vacuums. Reused many discarded hoses and cuffs.

[@annemcgowan2489]

Thank you for helping to save my old vacuum! I thought I was out of luck since I couldn't find a replacement hose for my model. But with a break right near the end, this tip did the trick!

[@jayc3110]

Thank you! That was simpler than I thought. Just fixed my vacuum hose after watching this. Thanks again and best wishes.

[@cherylfowler2666]

Wow. I wanna say thank you thank you thank you. Watching this video just saved me from buying a new hose …. You’re a lifesaver my hubby ordered part lol I said to him who is the part for cause it’s not for my vacuum is fixed lol Joking lol

[@petercrofts8962]

Thank you very much for putting this up. The trick of tearing out the remainder of the old hose is a good one.

[@Gabe_Cross]

This worked for me. Thank you very much. I have an old Hoover cordless vacuum cleaner that I could not find a replacement hose for. Fortunately the tear was on the very end just like the one in your video, so I could do exactly what you did here.

[@10gallons]

Thank you for this. Simple and straight to the point.

[@Findinglifesbeauty]

Thanks for sharing this!! Thought I was going to have to replace the vacuum, but this was an easy fix!

[@octogirl2046]

Wow, Thank you. I didn’t know I could do that. I’ve gone through five rolls of tape. Lol

[@belleck25]

Wow. This is a life saver. I was about to buy a new one if I couldn't get a new hose but you saved me. Although mine can't be screwed but it can hold and I can use it again. I jut probably need to buy something to tape it.

[@helsinkiproject]

So simple and brilliant. Thank you for the tip!

[@sanpansam7977]

Wow, so simple and easy. Thanks.

[@MatthewNelson12]

Thanks for posting this. It was really helpful!

[@robertalexander3959]

Very good. I like the part about just pulling the wire/hose out of the attachment thingy. A little better than another video's technique.

[@fhamid01]

thank you !!! I just fixed the nozzle to the vacuum after watching your video !!!

[@robertlock5501]

Nice - exactly the repair i was looking for - i'll be trying this out ASAP

[@480_Detailing]

I was about to take this new hose back to Home Depot then i realized it just came unscrewed thanks to this video 😂

[@brianwohlt352]

Thank you for the helpful video! You saved me $28.99.

[@ScorpioMsbhvn99]

Thanks so much! This really helped. I had no idea it was so easy.

[@ryanthomas49]

This is perfect advice. My Eureka Airspeed has a tear right at the end and I have to use a hand vacuum for stairs, hard to reach places, etc. In the future, I could use this.

[@lorrainedrake6462]

Very good advise ,wish I had seen this earlier could have saved some money 💲 by just fixing it and not paying out for a new one 🙄

[@but199018]

Thanks Hank! Worked like a charm for me as well.

[@Circa_-rp7zp]

Worked perfectly! Thank you so much

[@sabiantheomnivore5592]

Great video. Fixed mine in minutes.

[@spillingthetea-na1642]

🙏🙏🙏🙏 bless you for this video! Trying this tomorrow ❤

[@glenheil2449]

Thanks for the info just fixed my old kenmore

[@DEEDEEFARRELL]

Wow this is fantastic! So simple Thank you ❤

[@tattoedpassport]

Thank you!!! It works and saved me money. I almost cried cuz I’m broke 😭 and my vacuum was a hand me down. Has to be at least 15 years old. Thank you!!!!

[@DOLRED]

Yep. I have an early 1970s Montgomery Ward Canister Vac which I salvaged in 1976 and will not give up on. It still has all its might. Most canister bags, as different as some can be, will fit. The hose could use some work as you described. Thanks!!

[@isabellajohnson5779]

Super awesome video, it seems so simple and yet I wouldn’t have ever thought about doing this , my vacuum hose just broke on me and I’m lost without my vacuum having 2 small children and 2 cats I MUST have a vacuum lol, anyway thanks for the fantastic tip, I can make this stretch a little longer before I have to buy a new one

[@cme3344]

It worked!!! Thank you!!! I was just about to purchase one online and thought I'd search KZbin first.

[@mattphilip3266]

you saved my morning, thanks.

[@archstanton_live]

Get even more life out of your vacuum hose if after you do this: After you do this easy fix, add a few twists of electricians' or duct tape to the stress point (by the connector where the hose broke the first time). Reinforce the stress point.

[@freddiaz82]

Thanks dude! You just saved me time and money! 😀

[@mts7274]

Holy cow! Thanks for posting this. Just fixed my Bissell Powerforce Helix today after watching this video!

[@moonbladem]

Awesome tip! Thank you!

[@keithharris4867]

Worked like a charm!

[@cathyserafinowicz6374]

Thank you,I’m going to try this tomorrow.❤️👏🏻👏🏻👏🏻

[@carolgrimes6106]

Thank you this was a easy fix for me again thank you for the video 😊

[@recklesslyarrogant7242]

You saved me some big money ! So simple of a fix tooo.

[@jennifishy]

thank you so much something i would normally be grab the tape and repair it but your video save me alot

[@AlperUyan]

It works! Thanks man.

[@STByvantoad]

Thanks this worked like a charm

[@GeorgeWitham-qb6ye]

Love this vacuum!

[@wafaazaher9362]

شكرا بجد استفدت جدا 🌹🌹🌹

[@tizianaorazi665]

Grazie! Consiglio molto utile❤

[@joannapushman3806]

It worked 😊Thank you!

[@johnburns6422]

Good Job .

[@Venus_hooked]

Thank you very much❤ you are a life saver.

[@sharpazn]

perfect!!! I straight up teared up the whole thing and put hose right back in. I will have to buy some glue but for the moment the thing works perfectly!!! NO TOOLS!

[@luvr381]

This is great! I can't get replacement part for my Panasonic vacuum anymore.

[@alanr1062]

Thank you, it worked a treat on my Vax lift off 👍

[@richardstell8099]

Thank you sir ! 😀

[@nellieandclarice]

Thank you for this video. I’ve been glueing mine with a plastic glue and it’s been OK for about 10 uses and then it cracks again the glue comes loose. I’m gonna try your tip now. If it continues to crack, I will buy a new one.

[@kundi13]

Saved me moneyyyy....thank youuuu !!!

[@peterfrance702]

Thank you!

[@stuffoflardohfortheloveof]

Well well, nice one! Didn't know you could do that 👍

[@cassiewoolfrey313]

Thank you SO MUCH!

[@jerleytomatao7598]

Thank you so much now i can fix our vacuum hoss cleaner now’

[@sesker12]

THANK YOU SO MUCH ...

[@patmccleland988]

Thank you Hank! So easy. Thanks for an easy to follow description....

[@meshark_t]

Tnx, good to know it can be done.

[@mattwaters6987]

Good to know. Thanks for sharing. 👍 😊

[@wabbitsocks1513]

You the man thanks

[@martinkuo1380]

Worked like a charm on a kinked Bissell hose.

[@fishcats1]

Thank you so much!

[@leeskeery]

Great. Thank you 👍

[@Alsedana]

Thank you you have been really helpful

[@hanksgarage_]

Glad it helped

[@aileencarla13]

Thank you sir ❤

[@smilewithnature820]

Thank you....big big thank you

[@anthonygameclub4059]

Thanks so much from Bali paradise island 🏝️🏝️🏝️

[@adduintense]

Thank u!❤

[@MIEDEPAIN20011]

Great , thank you 😊

[@JoseFlores-jc4ob]

Thank you. Can you replace an Atrix backpack hose? I would love to know if that is possible without buying the new hose.

[@judeamuwella8699]

Thanks, I searched for u tube but most of the hoses connections are by two tabs which my one does not have. I ll try this method tomorrow. Thanks in advance

[@shattered-reflection8045]

Great quick instructional video! Thank you!

[@MrDouglasshippuden]

Didn’t even know it was a screw on. You saved me $30

[@gayegerard]

Hi Hank, my vacuum hose broke too, but it came off at the actual piece that connects to the wand part at the top closest to the actual vacuum motor. I have the hoover cats and dog turbo model. How do I fix this so it will reconnect inside the wand I cant seem to get the inside part of the hose which snapped off inside the wand, it must be glued down. Any advice? The place i bought it has shut down all shops.

[@fiore32]

Omg this is so cool 😎

[@markbrouillette9075]

Thanks, brotha!

[@justmoi7934]

Getin!! After 5years of gorilla tape and sighs of 😤😤😫😫 I now have a proper hose well chuffed thankyou! Oh I have a vax and it’s like when you get to the end of taking the broken bit out of the connector..they must of siliconed and super glued that right in there, so I took my needle nose pliers and started twisting it around them (I just couldn’t do the last bit by hand at all) came out so easily after that 🤩🤩🤩

[@Oakley1331]

Thank you SO MUCH for this video! Before I watched this, I thought the hose was glued in the handle. Then my husband tried unscrewing it.. I started sweating watching him, certain he was going to break the plastic end piece an second. That's when I started frantically googling for a solution. It was like the clouds parted & the sun came out when I seen your video: )Good job on this little video. It was short, to the point & extremely helpful. 🤩

[@vallprout]

Worked for Electrolux Oxygen. However, my machine had 2 wires embedded in the hose in the socket that had to be cut to get the hose out. That meant that the carpet head would not be able to vibrate on operation. But will just have to use the hardwood floor head instead.

[@peggybrenneman6371]

Where does one purchase a continuous length of hose to do this? I have a cleaning business and I use the Shark Navigator Pet Vac. The only thing that ever breaks on these vacuums is the hose and that's from using a coat hanger to get it unplugged. I have 4 hoses I need to repair but can't find where to buy just vacuum hosing? TIA

[@cynthiaroswick1621]

Thank you for your video. I almost ordered a new hose($64.00). You are a life saver

[@SaaviPuri-br7kq]

thanks

[@IlusIl]

OMG, is that easy? I almost buy the new one, thanks bro

[@J_C_Zarn]

"If you can't unscrew it, just undo it" - Planned Parenthood

[@Jp-kb3op]

lol

[@paulmusch675]

Do you think a Beam Rugmaster Hose would be repaired similarly?

[@user-22-]

Will this method work for a Hoover Widepath using water?? I’m thinking prob. not..

[@NeverEndingStar]

we have tape around ours right now, im going to try this LOL