Hantek 6022BE USB Oscilloscope Introduction

[@TheNoCodeTech]

Had to watch this one a few times. Very informative and helpful. Thank you so very much. HLTW TeamReplay for the win!

[@TheSmokinApe]

Thanks for checking it out No Code, that was a fun one to make 👍

[@josempantaleon]

Color coordinate your probes to match your outfit??? I am impressed, you actually said that without skipping a beat. Well done... 😜

[@TheSmokinApe]

Lol, thanks for checking it out Jose 👍

[@k7ilo_Las_Vegas]

So what is your final opinion of this low priced O-scope. Is it worth it for what it is? Thanks

[@tıbhendese]

I want to measure 10V 6:40 can't it measure voltages greater than 5 ? how this probe - attenuation relation works , its a bit confusing

[@gregorysmith3097]

It's amazing that test gear can be had so cheaply now a days. I'd be curious to see this tested against a "real" Oscilloscope. I know that it won't be as accurate as a Tectonics, but it may be accurate enough. Know anyone with a real O-scope you can borrow?

[@TheSmokinApe]

It is crazy how regular folks can get their hands on stuff like this these days. I am trying to see who has one I can use, I am sure I'll track something down at some point. Thanks for checking out the video Gregory.

[@gregorysmith3097]

@@TheSmokinApe How about TO? He's got all kinds of other crap, maybe he's got an O-scope. hehe

[@TheSmokinApe]

@@gregorysmith3097 he has one that’s like 30 years old… lol

[@gregorysmith3097]

@@TheSmokinApe Hey, if it's a Tektronix, it was probably $25k new

[@TheSmokinApe]

I asked, it’s a BK Precision 1466A

[@uni-byte]

The RED USB is power only, the black is power and data. The reason for two power sources is because some USB ports do not supply enough current. The color rings are to match the probe with the trace color, not your outfit. Why did you not check out the bandwidth? Is it really 20MHz?

[@TheSmokinApe]

Thanks for the info about the power inputs 👍

[@kevinkc3onohelijeepworld]

Thought you had a spectrum analyzer? Did you ever do a vid on it ??

[@TheSmokinApe]

I did, video coming soon. Thanks for the support Kevin 👍

[@kevinkc3onohelijeepworld]

@@TheSmokinApe waiting impatiently ☺️😉

[@markharrisllb]

I have the BL and I run it on a cheap Samsung tablet I had for work before I retired, I also use HScope for the Oscilloscope. I still use Windows for the logic analyser which I very rarely use. I'll be honest, I hardly use my scope, I don’t really know what I'm doing yet except looking for things that don’t look right on ICs and relays.

[@TheSmokinApe]

Hey Mark. These are poplar scopes for sure, thanks for watching!

[@alexisniyongabo]

Hello. I'd like to ask what's the maximum voltage applicable to the probes? Thanks

[@TheSmokinApe]

Hey Alexis, I no longer have this scope. You could probably check the product documentation and find out 👍

[@alexisniyongabo]

Hello TheSmokinApe. Tank you for your answer. I'll check again in the doc. But I had already read it. I didn't find anything about that voltage...

[@alexisniyongabo]

Hello👋 I was reading the Hantek6022BE user manual again, it's not indicated the applicable voltage between the probe and the ground clamp. I would like to show to my students dephases in resistive, inductive and capacitive circuits, in 230VAC. For current measurement, this is not a problem. But for the 230V voltage, I'm afraid to burn out the oscilloscope...

[@jasonbrown467]

this stuff is new to me, but i found i could test the 120v "mains" with 100x probes and using a win7 os, for what ever the reason it crashes on win10, as soon as i put a 1500 watt resistive load on a psw inverter, it works fine on the win 7 laptop

[@mu8502]

Hi, does this oscilloscope only store the data signal on the screen or does it store all the samples from the beginning

[@RedNeckSurgeyTech]

What can a ham measure with this. How is it helpful. New ham thanks.

[@TheSmokinApe]

Mostly they are used for repair work and measuring signals and voltage inside of equipment. Personally, if I were a new ham I'd invest in antenna analyzers before a scope.

[@RedNeckSurgeyTech]

@@TheSmokinApe very good thanks. I guess I'm fairly new. I've got a couplea analyzers... love the channel it's very helpful.

[@mu8502]

Hi can I save data a few times inside a file