Hantek 6022BE USB Oscilloscope Teardown

Get professional PCBs for low prices from www.pcbway.com -~-
Hantek 6022BE USB Oscilloscope Teardown
In this video we take a look inside the Hantek 6022BE 2 channel USB oscilloscope. This is an excellent entry level oscilloscope powered by a unique chip called the EZ-USB which cotains both a USB tranceiver and an 8051 microprocessor.
My Review of the Hantek 6022BE: • Hantek 6022BE Overview
JYE Tech DSO 138: goo.gl/VTLSGc
Hantek 6022BE: amzn.to/2nKW1Kl
Hantek DSO5072P: amzn.to/2Ec1SCI

[@DouglasKryder]

9K subs, Paul. way to go!

[@learnelectronics]

+Douglas Kryder Thank you

[@deadlifog]

The 5pin ic (HRA) i opamp not the polyfuse and black box on top of the board is isolated dc/dc converter not relay

[@markharrisllb]

I have the BL version, which is basically a BE with a 16 channel logic analyser. I’m presuming that’s what some of the unpopulated board is about. I mainly use HScope on a Samsung Tab A I was given to help working with my disabilities but have always hated it until I put HScope on it. It’s a great learning device, especially when you rarely use a 'scope because you don’t know how and when to one.

[@supercybercow5388]

Unpopulated stuff on the bottom is for the logic analyzer part from the 6022BL model, although the BL is not a real MSO (you can't use the scope and the analyzer at the same time) but for the budget still offers nice features like here described + 16 ch really basic features logic analyzer, but still it has it, you can hook up to your arduino or other fpga stuff, until you hit 20Mhz you should be fine. Budget and entry level is the main predicate here, and don't expect fireworks which costs money in the range of $$$ or $$$$+

[@ralphmills7322]

I assume if you did the teardown of the Hantek 6022BL you will find that many of the unpopulated pads on the 6022BE are for the Logic Analyser circuitry.

[@migsvensurfing6310]

Nice ! Also look at Picoscope, has an arbitrary tone generator to.

[@danthemancasey]

Please review the FFT function! Besides being a relatively cheap entry-level oscilloscope, this is possibly THE cheapest method of spectrum analysis (above audible). Personally the FFT function is the selling point (even my oldest scope being an order of magnitude better bandwidth) as even used/for repair spectrum analyzers carry a painful sticker price. Thank you and keep up the good work!

[@michaelpadovani9566]

It was nice to do the "walk-thru" on the guts of this scope. Looks very well made.

[@learnelectronics]

+Michael Padovani Thanks. Hantek makes nice gear.

[@georgechambers3197]

The Hantek 6022BE is perfect for what I do. I bought one after your video and never regretted it for a minute. I paid $69 on Amazon for mine and I still think it's a deal. I wondered what was inside it. A lot of gold and really nice soldering. Thanks for the tip and thanks for showing us her guts! And congrats on the 9K subs. This chanel rocks!

[@learnelectronics]

+George Chambers Thank you George, you've been with me a long time. I always look forward to your comments.

[@ipodtouch470]

@@learnelectronics bought a hantek 6022 bl. Ran open hantek on that bad boy and it's great.

[@ronshaw80]

If you are into electronics, its difficult to do anything without a scope. Bench scopes can be had for very little these days. If you are into electronics, get the holy trinity. A scope, a multimeter, and a signal generator.

[@philipanderson9434]

Nice teardown.

[@theGADGETSplaylist]

I own one and with a 10" Android tablet running HScope it's really sweet! I was hoping for more info on the ADC chip in your teardown as I hear the HScope developer is coming out with 10bit vert resolution support on the HT6022BE! I was wondering if the ADC chip used here was even hardware capable of 10bit.

[@jon87386]

Actually (around 2:45) the unpopulated stuff is for a 16 channel logic analyzer, the 6022BL. They probably have an entirely different PCB for the 4ch models.

[@fireracerworkshop8251]

Yes bro, you are absolutely right.

[@alejandrogallego2276]

That's the one I want!!

[@SH-my8el]

Great video

[@Avechuchoaxel]

Do you know the value of those 2 fuses? I have just continuity on 1 leg each... Its dead showing SEARCHING DEVICE... Thanks

[@naatechnaatech9975]

hello I get a hantek6022be but when I try to measure the voltage of a source like battery the waves form disappeared on the srcreen

[@moraesdiesel-ocanaldomecan9825]

Olá , sou do Brasil , tem como fazer um vídeo explicando sobre o hantek 6074be ? O meu ociloscópio parou de funcionar , ele é alimentado porém não dá a partida e o problema é interno !! Thanks

[@dancoz5477]

En passant .. great video.

[@davidprice2861]

Hi Paul, I bought the Hantek 6022BE after I saw your first review of it. Interestingly that was the very first time I watched one of your videos (fair dinkum). Very good little scope for a hobbyist, it works well, very accurate in fact, and depending on your pc, a very good display! For a hobbyist or student it's ideal, comes with professional quality probes too. Cheers. ps. well done on the 9K.

[@learnelectronics]

+David Price Thanks David. This little scope is a great performer.

[@newsmb6871]

Can you measure the power of the amp to find out the wattage of a power with a hantek 6022be with a dummy load?

[@GoatZilla]

Anyone have data on those polyfuses?

[@fberkkaya]

which ADC has been used?

[@mu8502]

Hi, does this oscilloscope only store the data signal on the screen or does it store all the samples from the beginning

[@kaybhee6]

does x y mode work for u

[@dancoz5477]

Ups...! Just blew my new Hantek 6022be(on its first trial run). Its also my first diode (LR206) blowup, ;-) by shorting one of the probes. Hence, no more scope. I looked inside the unit and it looks like there is hope. I found and cleaned the only area that seems to have given up. It seems to be an evaporated inductor labeled L3 near the USB cable junction on the left side of the PCB, no JP1. My problem is that I do not know what its Henry value is? Can any body hellllllPPPP me. Mile merci du Québec.

[@elnasty555]

I've had one for 2 years but dual channel is rubbish on mine.

[@robertofkennedy]

How would one active a/c coupling on hantek 1008 ?

[@learnelectronics]

Not familiar with that unit

[@johnf3326]

£30 UK on Ebay! 👍

[@FrankTricamo]

@1:45 you mention a link to other software, instead the Hantek

[@mmfloom]

YOU CAN USE THIS github.com/OpenHantek/openhantek/blob/master/docs/images/screenshot_mainwindow.png

[@mrnickbig1]

Where in the heck is the other software for this USB scope that you claimed you would provide links to? The links are not on your review video, either!

[@learnelectronics]

Had to remove them Sorry.

[@mrnickbig1]

@@learnelectronics Was one of them the BasicScope? Anyway, I was able to get the Hantek software (1.0.5) to work well on Win10-64 using the Win8 compatibility setting.

[@ipodtouch470]

@@mrnickbig1 try open hantek 6022 on GitHub.

[@OndrejPopp]

I am thinking about the ISO1071A with a wifi hub and displays directly on your Android/Ios. So after I watched this video you can see the mother board of the ISO 1071 right here kzbin.info/www/bejne/i56snolphZiDgbM I must say it looks quite similar 😃

[@jsam2025]

whos try in phone