Mazda CX-5 Rear Bumper Cover Removal & Installation (2013+)

How to guide on removing the rear bumper cover on the Mazda CX-5.

[@jasontomljanovic]

9 years later and this video is still helping people. Well done! I’ll be doing this soon on a family cx-5 with the same type of dent in the rear bumper 👍🏻

[@happywrenching]

Love to hear these comments!

[@paulrankin8578]

This is gold. Managed to get an undamaged bumper from a wrecker and replaced the one I damaged no problems. Wife is talking to me again.Many many thanks

[@sarahsmith2655]

“Wife is talking to me again” 😂 This made me laugh! thanks

[@MICMON]

Haha I’m about to do this. Wife will hopefully talk to me again afterwards too!!

[@kevinhancock4064]

Pmsl that's class

[@neilclark8493]

I dented the bumper of my loaner car. With a heat gun, shaping tools and your vid , it’s perfect again. Thx for the coaching.

[@jasonpthiel]

Thank you! This video helped me replace my bumper with ease!

[@donaldnederveen8678]

I had to remove the rear bumper of my Mazda CX- 5 in order to install a tow bar. This instruction video was really helpfull . The spoken comment is very understandable and step by step I succeeded in removing the bumper. Greet video. goed teacher. By the way I am in The Netherlands.

[@MJNHardcore]

Thank you so much! Had to attach a tow bar and this video was a life saver!

[@mikekantor453]

Great video! Very informative and detailed! I have a 2019 but can't find any videos like this.

[@sarahsmith2655]

I know it probably seems like common knowledge to many of us concerning disconnecting the battery before working on a car, but most people actually don’t remember that or think of it at all. I’m glad you mentioned that for people to hear!

[@kevinhancock4064]

To right . Amy sensors I replace or plugs I remove I disconnect neg terminal 4 sure . A short could potentially activate air bag to

[@mathewdavis-adventuresandd6643]

Exactly the video I needed. Thanks, I've got to pull my daughter's bumper and repair a 3 inch cut through the bumper.

[@susanarodriguez4299]

Thank you !. I am definitely going to replace my rear bumper on my own you saved me a couple thousands dollars bro! . I have a little project to do 😊😊.

[@alexedward1250]

Nice job explaining everything in detail. Very helpful.

[@user-vb7ct9mv6i]

Nice job, quite clear procedure

[@andybisson4692]

Super helpful video, thank you sir!

[@bahec700]

This is so well done, thank you!

[@patrickbateman9242]

My respect to you man, thanks a lot!!

[@everywherejeff]

Thanks for the video, very helpful

[@abblechan8107]

Thank you for your detailed steps for fixing the rear bumper. May I ask, when hit by car behind causing damage to rear bumper, the rear protective bar covered by the bumper will in avoidable be damaged which required replacement as well. Can we fix it easily by ourselves too?

[@hersheyr08]

Hey awesome video. Is this the same process for the 2016 model?!

[@ruffgirl1776]

Mine has the same problem. THANK YOU SO MUCH

[@buf67]

Thanks! The little wheeled platform you used to move the new bumper in place? Is that a just a stool?

[@lukha225]

please do a video on how to replace outside right mirror on a cx-5. Thx

[@K03sport]

fast Fwd 1-yr later and we were rear ended in a chain reaction crash. the lower black portion took damage from the other person's front plate 😣. w/o a front plate, damage would have been minimal; however, the two bolts dug through the plastic. need to check the rear crash bar. luckily, no airbags deployed. I wrench happiest when nothing breaks, even the plastic clips, when disassembling

[@SushiLeader]

Thank you so much!

[@MiroslavJahelka]

have u ever change back right fog light bulb ?

[@user-zc8lt3bd3l]

Thanks man

[@kevinhancock4064]

Nice seems simpler than rxiected 2 questions was it just 1 light you removed ? And im.guessing the bumpers loke mone woth reverse sensirs youd need to be careful rekoving not to pull kn cables right ty

[@thedjlegend1]

Hi, do you have a video on how to secure the license plate? I'd like to secure the license plate with a bolt on the inside of the car.

[@videolifeca]

How did you fix your bumper.. I have same thing on my 2018

[@StanislavYanakiev]

When you took off the bumper (3:18) , what is black square part attached on the right side? Any idea?

[@jasonso2893]

Hi nice video. I have a Mazda 3 2014 model. The way you take the bumper off would it be similar ???

[@happywrenching]

+Jason So I would say yes, the location of clips and screws will be similar. Not sure about the tail lights though.

[@perezozo83]

what material is the bumper of mazda cx 3 ?? is it plastic?

[@cakeeater1010]

Hey great video! Where did you buy the new replacement part?

[@happywrenching]

Cake Eater I just took the bumper cover off to remove the dent - didn't actually buy a replacement bumper.

[@genekim880322]

happywrenching hi i have a similar dent on my cx 5 on that area. Did you use the heat gun directly to the dent front outside or inside?

[@happywrenching]

Gene Kim I just boiled some water and poured it on the inside of the bumper. Let it sit for a minute or so and was then able to push the dent out. With a heat gun, I would still use it on the inside of the bumper.

[@roxannepezdir7293]

how do you install the rear bumper on a 2004 mazda 6

[@HK-ct1jb]

The right side of my rear bumper is not clipping in fully closed to the bumper cover not tail light. What do I need to fix that? Appreciate any help on this.

[@oliviamo425]

can you do a video on a 2015 mazda 3 too? :)

[@harmeettatla1981]

I just have a loose rear fog light which I need to see what the issue is - is there any easier way to access just the fog itself ?

[@K03sport]

there should be access panels behind the rear tire (held by plastic clips or possibly concealed by the rear mud guards) and from underneath where he was removing the two Philips head screws...

[@shammylequit7470]

Where did you order your bumper?

[@scooby4246]

Anyone have or know of a video on how to remove the 3rd brake light for 2013 CX5?

[@gayalivingston9032]

Hi, i need to replace the tail light cover on the left side (both - one on the side and other on the hatch that opens). i have Mazda 5, 2015-2016. do you have a video on that?

[@happywrenching]

+Gaya Livingston Nope, I don't have anything on the Mazda 5.

[@zarekzarek]

Hi, I need the same but Mazda 3 HB from 2014. Please.

[@mtay65]

5:00 what is that electronic gadget in white?

[@tracerkester]

Do you have any videos on how to remove a rear bumper guard? I need to replace mine and don't want to damage the bumper paint!

[@happywrenching]

+Trace' Kester I personally don't have a video but those things are glued on so treat it as you would an emblem. Search for "how to remove car emblem" - there are some good videos on KZbin for that. You will need fishing line, and heat gun (even a hair dryer would probably work).

[@tracerkester]

Thank you!

[@xsimon2000]

Where you able to remove rear bumper guard? If so, how did you do it?

[@tracerkester]

+Simon Wei It was very easy! I used fishing line and a blow dryer!

[@TommyJones49]

Omg so easy! Just paid 1040. bucks to have mine painted and replaced with brake light. Does it come painted? Shop is charging me for paint in shop now.

[@K03sport]

not painted; all black plastic. however the top section is smooth and the lower section is textured.

[@victorgold4735]

Is that black matt part can be changes or it's all one piece?

[@K03sport]

all 1 piece sadly...upper part needs painted on replacement covers

[@prophetaki]

where did you got that color for the bumoer cover i been looking for one

[@vissevolker955]

Sand with wet or dry 320 grit, clean and dry first, then spray with semi flat black bumper spray from your Wesco Automotive supply store or from an auto parts store.

[@F1sh73]

Great video! Does anyone know what are the modules on both sides of the body, below the bumper, 4:56 and 5:01 ?

[@vissevolker955]

KD3167Y30A and B blind spot monitor modules.

[@victoraraoz75]

your voice has to carry more energy and try not having long periods of silence... video is great