Harbor Freight 2HP Dust Collector Modification Part 2/3

Modify a one-stage Harbor Freight 2HP dust collector to a two-stage with a Thien baffle. Key takeaways:
- You don't have to pick up the motor while you measure.
- You don't have to spend a lot of money.
- You don't have to build a new dolly.
I also post pictures of things I build on Instagram: / thesnekkershow .
This video is not sponsored, but I may earn a small commission if you use one of these links to make a purchase:
Rockler 4” x 2' stretch hose: amzn.to/3bDOXsH
Rockler 4” x 4' stretch hose: amzn.to/38VGuQ5
4” black corrugated snap coupler: amzn.to/3bR03uM
Rockler threaded disconnect fitting: amzn.to/3nW9mvu
4” hand-keyed hose clamps: amzn.to/38Vf6Bv
4” PCV coupler: amzn.to/3imTUaV

[@antonleimbach648]

Great job and excellent video, thanks for sharing!

[@TheSnekkerShow]

My pleasure, thanks.

[@jeffreyfroehle6414]

The baffle that is in the trash can. Can you tell me the size? It looks like you have created a baffle, but I can tell the size. Any help would be appreciated.

[@TheSnekkerShow]

It's a Thien baffle, but probably not the best one ever made. The lower disc was cut from a 19" diameter circle, and has a 1 1/4" inset cut around slightly over 2/3 of the perimeter. You'll find a lot more information on www.jpthien.com/cy.htm.

[@daisycorta3340]

my nigga

[@TheSnekkerShow]

daisy corta Glad you enjoyed it.