Harbor Freight Multitool! (This Leatherman Wave clone is definitely going to rock the boat)

[@AtomicBleach]

Just a heads up peeps if you order the tool online it says lifetime warranty in your cart. If you buy in store it only comes with a 90 day limited warranty! So buy online if you can! Again the free lifetime warranty pops up only after you have added the item to your cart. I went and returned the one i had bought in store and bought it and had it shipped to my house online so it would have the lifetime warranty attached!

[@maxlvledc]

This is really cool

[@AtomicBleach]

@@maxlvledc I'm sure it's just a mistake online but Im going to definitely take advantage of it

[@georgemitchell8991]

Dude pro tip! Thanks it still says lifetime. I just bought mine online

[@pancakesafterdark3335]

Just bought one online because of this tip. I'm sure it's a mistake, but like others I'll take advantage

[@Steamrunner]

Harbor Freight might've seen this post. The online warranty says 90 days under Product Support as of 5/25/2024 (unless it is state specific).

[@Xaluber]

Man, you got this out quick. I'm the one that sent in the tip. Glad to see it's not junk. I've been loving HF recently.

[@maxlvledc]

Haha, thanks! Always a fun day of discovery

[@lannylancaster62]

The guys at Harbor Freight have been bringing it lately. They are tapped into the market and clearly understand how to write the specs for the OEM.

[@MustSeeInside]

They made a big gamble on their business model like 10 years ago and it’s working beautifully. Their tool quality and reliability has improved almost across the board, they’re effectively managing their costs, and they’re relying on word of mouth for marketing. Some of their tools are better than anything in the big box stores, and at half the price. Eric Smidt is a legit genius.

[@lannylancaster62]

@@MustSeeInside You are spot on. It's been transformative in the tool business.

[@arresthillary9502]

yeah, its called THEFT of intellectual property. communist chinese are experts at it. stop supporting them by buying at Harbor Freight

[@neal6473]

Harbor Freight is moving up like the Jeffersons 😉💯.

[@jamesbynum3123]

I’m a field service mechanic and there’s a ton of Harbor Freight stuff on my truck. From flashlights to sockets to specialty diagnostic equipment, they really have come up in the world.

[@Exane22]

Competition is always a great driver of innovation, so I say bring it on. Leatherman seems to need a swift kick to the nuts as of late.

[@BrandonGavin_EDC]

The fact they haven’t released a new squirt model is ridiculous since there is no dominate one in that size in the market that many want.

[@Jaspel]

Generally I agree. It does encourage offshoring manufacturing.

[@ryanduff1228]

I agree with @Exane22 and @Jaspel. Leatherman does need a swift kick in the nuts; and I’m always concerned that the innovative may only be on how to access cheep labor around the world. Also I secretly love Harbor Freight. Consistency is the hobgoblin of small minds?

[@dougr.6734]

@@BrandonGavin_EDC I want a Squirt PS4 in its exact form (maybe add a tweezers and possibly a screwdriver in lieu of the file) but about 25% larger and more robust.

[@BrandonGavin_EDC]

@@dougr.6734 exactly! I want those scissors like the Roxon mini’s have.

[@majorpowell10]

If you are an inside track member, Harbor freight has a 20% off any item no exclusions in store coupon going on for memorial day weekend. It makes this $32 - same price as the LM bit kit, lol!

[@atomicsmith]

Leatherman’s pricing has been out of control for a while now. Hopefully this brings them back to earth. $32 for that tiny bit kit is ridiculous.

[@BeefT-Sq]

It costs money to make products in America. Part of that is stifling taxes, regulation and lawsuit lotto.

[@herbderbler1585]

@@BeefT-Sq yep. It's hard to beat China when they decide to actually engage quality control with their slave labor costs.

[@escapetherace1943]

@@BeefT-Sq true but machines do the heavy work. Leatherman's profit margin is still HUGE and they refuse to innovate or add what their fans want to their tools. Normally I wouldn't like companies copying others but due to the way Leatherman behaves I really don't care. That said I love the wave

[@texmex658]

Nice video. I bought a leatherman wave with a leather case that came with it back in 1994. It costs me a little over 40 bucks at Wal-Mart. I still have it. I use it just about every day at work. It has not broken or has any pieces missing or chipped. I am proud to have one that lasted me this long. Waves are hard to beat.

[@stevenchurch8901]

Yup, my wife got me one in '97, still mostly works as it did day one. I've had to replace bits, and the wire cutter is a tad chipped up, but it is still a great functional tool that is used near every day.

[@dougvuillemot8670]

Iv got a brand new wave in package still. It was the hundred plus dollar one from 10 to 15 years ago. I collect knives.

[@papageo5]

So I'm 50 yrs old. If I bought a wave now, it would very likely be an heirloom. Wow. I remember my grandpa buying a car. He said he got a nicer one than usual because it was the last one he would buy. He was right.

[@texmex658]

@papageo5 Yes. It's crazy how prices have changed.

[@thefilipinapee]

Is the harbor freight tool manufactured in Taiwan? Thanks for posting video

[@HelplessTeno]

I've been hesitating on buying a Surge or Wave but really want something bigger than my SOG Powerpint. Got a HF 5 mins down the road so I'll be picking one of these up. Thanks for staying informed on the industry, because it probably would have been months till I even saw this thing otherwise.

[@denoftools]

Some people have been claiming this has a lifetime warranty due to a typo. It does not. It's 90 days as per the product page and as per all other Gordon products.

[@workingcountry1776]

Hey it's Red! My kids miss the bear FYI....

[@gabewilson8696]

Just picked one up and wow you weren’t lying pretty good for 40$!! Pleasantly surprised

[@guarddog3082171]

I just bought one from my local store, wasn't even on the shelf yet. The employee went to the back room, opened the package, and handed me the first one. I opened the package and checked it out as soon as I got in the car and the multi-tool was just as described. This is my new daily carry for sure. Thank you for the content, sir.

[@rallaa941]

If Harbor Freight makes a leatherman style bit kit, I will buy them both. And if their clone bits are sturdier than leatherman's, it will be absolutely hilarious.

[@johnkraemer5505]

Awesome! I would love to see Harbor Freight come out with a complete set of bits, a ratchet, and a Surge clone! Leatherman needs to wake up!

[@ironheadcj5]

I have the Rocktol Surge clone and the SQT Charge TTI plus clone and man they are impressive!

[@wildbill23c]

I have a lot of Leatherman multi-tools but I have to agree Leatherman needs to wake up....the thing is, people complaining about the prices of the Leatherman tools, keep in mind many of them and the components are made in Oregon in the US...VS other countries that you are buying from on the Clones, so certainly a Cloned version made in China is gonna be a lot cheaper than the same brand name multi-tool made in the US....However, Leatherman has kind of gotten behind in the terms on innovation and new stuff...they keep coming out with new colors of their tools...in reality who gives a damn, how about some new tools to get the interest of potential new customers or repeat customers rather than worrying about how many colors of a multi-tool you can make, that all scrapes off after a few uses anyhow.

[@scooterdoo1]

It’s crazy how similar these two are. It even has the hidden lanyard under the saw just like the wave! Great video I picked this up right after watching this video! Now I’m looking on how to add a fero rod

[@MCmotoUSA]

Just picked this multi tool up today after watching your video this morning. I’ve had a Leatherman Wingman for years, and always wanted a Wave but not at that price point. I am blown away by how nicely made this Gordon tool is, for $40 it’s an absolute steal!

[@dualsportoutdoors]

F the clone. Spend the extra dough and jump past the Wave to a Charge and thank me later for the advice

[@MCmotoUSA]

@@dualsportoutdoors Found the guy who’s paid by Leatherman 🤣

[@dualsportoutdoors]

@@MCmotoUSA I don't even do reviews anymore. Haven't in 2 years and actually deleted all my review videos. I never even got big enough to get sponsors. I just really hate clones, regardless of whose designs they rip off. My primary multitool is also a Victorinox Swiss Tool and I hated the Leatherman Arc so much that I sold it a week after buying it because the cutters cut on even easier wire than a coat hanger, the frame flexed like an Ozark Trail, and the "Magnacut" didn't hold an edge worth a damn. Also, my favorite Leatherman model is actually the Surge, which I pair with a Victorinox Farmer x

[@lifewasting]

Hopefully they will do a surge version! Leathermans B.S. with the ratchets impossible to get and garage scams have pushed me away from them.

[@C0BALTWARRI0R19]

Always wanted a Leatherman wave. lookin forward to grabbing a Gordon 20 in 1 for $80 less.

[@RealJeep]

And the communist Chinese will thank you.

[@alexanderheling2057]

This will be my next multi tool purchase without a doubt. For the price its def a no-brainer.

[@AndrewDasilvaPLT]

Walmart/Ozark Trail has a $40 one that I used for years before losing it. I was impressed.

[@broke_miata]

I gave the ozark one a chance and the plier head snapped the first time I used it 😂. I went and bought a wave. I love hf but I’d be scared of the same thing happening to this one in the video.

[@SillyOmega]

Harbor frights better quality than walmart.

[@lickitysplit2413]

I’ll keep doing business with Leathermen. They have done alright by me over the years. Whenever I need my Supertool 300 tuned up, it has always been done for free and promptly shipped back to me.

[@stevenchurch8901]

It sounds like me with my old Buck knives, lol. Quality products with top-notch customer service will always win out with me

[@PaulyV56]

agreed, I have broken the pliers before, they sent me a brand new tool, I still own a supertoll from the 90's.

[@Youtubeuser1aa]

Wel I don’t have $300 to spend on a multitool lol

[@josephf7260]

Why spend $200 when you can spend $40? When using the tool, I don't think people can read the name brand...lol🤣🤣🤣

[@tylergilbertson4086]

Harbor freight has stepped up their game on a lot of things lately. For instance, floor jacks and winches compete with the big name brands

[@aday1637]

I just bought a cordless Hercules compact impact wrench that boasts 500 ft lbs of nut loosening ability. I had a blade stuck on my rider deck that I couldn't get off. It had picked up a piece of wire and wrapped around the shaft which wedged against the nut. I had the front of the rider on a jack and only had 10 inches from floor to nut. Anyhow I got the tool for free by buying the charger and 5 a/h battery for $99.98, plus tax. Has better specs than dewalt stubby. Both brands are 6 inches from back to tip of anvil. I got some stubby impact sockets so I can get this thing in more places (they were $39.99 for metric). The tool has 3 speeds and auto and jolted the stuck nut off. The dewalt bare tool was $168 with a 2 day wait from Amazoid. HF is 8 miles from my home and had it all in stock so I could finish the job the same afternoon.

[@yell0wberry]

Definitely true ever since they got a new CEO. The Gordon survival kit is absolutely phenomenal as it compares to the one sold at Walmart.

[@ToolTechGeek]

I’m loving this. I go regularly to HF and always wished they would distribute some of the clones one sees in Amazon or Aliexpress but this went much further. 😊

[@ParkerBinion]

I've been waiting for something like this. Thanks Dominic.

[@ParkerBinion]

6 weeks in and I've been very impressed. Even the scissors handle everything I throw at it.

[@larryvincent1083]

Waiting for the bits from HF.

[@JoshuaHargrave]

You could look into a Leatherman style bit extender for 1/4" bits. That way if you already have the bits you just need the extender. It's better anyway.

[@billybunter3753]

​@@JoshuaHargraveThat's what I was thinking. And the extension bar having a flat end/bottom might be held in better by the magnet than the bits?

[@JoshuaHargrave]

@@billybunter3753 Absolutely! The Dreyoo is $12 on Amazon right now. Could be a good fit.

[@darronjknight]

I got a standard, cheap bit extender and filed it to fit the wave.

[@tomperone9338]

My local Harbor Freight didn't have it. There's another store a little further south that supposedly did. I went down there, but the guy had no idea what I was talking about until I showed him online. Turns out they had some in the back. They hadn't even put them out yet.

[@chemburn1288]

just picked one up at my local harbor freight! I think its an awesome multitool! great alternative to a leatherman.. i only wish they would have to done a regular 1/4 bit set with these as well!

[@garethcollins8201]

As a big leatherman fan I have to say that I am tired of them being stolen on site. An alternative that does what I need and can be abused without you being worried about damaging something expensive, well for me, I’m happy that there are working mens tools coming into the market.

[@lindboknifeandtool]

Yeah my crunch has gotten swiped a ton. I stopped showing it off, it’s a damn cool tool.

[@wildbill23c]

@@lindboknifeandtool Those things are damn expensive too. Price has doubled on them since I bought mine 10 years ago. I have quite a collection of Leatherman Multi-tools and a few of their knives...quite a few of the tools I have though are discontinued models though.

[@clydedoris5002]

Stopped bringing my leathermen to work because people kept coming to use it

[@jasonlewis6914]

I just got this I have a handful of Leatherman multi tools. This right up there with them. the good quality is outstanding. I was very surprised.

[@rcupidan]

Thanks to your video I took advantage of the 10% off Memorial Day sale at Harbor Freight. Since the Gordon mutitool is a new product the staff didn't know where it was in the store. Lucky I came across who I would call the employee of the month and she found it 🎉. Cheers to you Dominic for being on top of this great find!

[@Xtopher822]

I picked one of these up yesterday thanks to your video and I have to say, not only am I impressed, but the main blade was hair-shaving sharp right out of the box, which is much more than I can say about the leatherman skeletool CX I got for father's day.

[@AntonioClaudioMichael]

What a impressive Leatherman wave clone wow

[@Keith80027]

Thanks for doing the review. I had my wave since 1998 when my wife gave it to me as a gift. I carried and use it since wearing out four holsters. I know the wave holds up. I have a MUT to that I like as it allows easy replacement of cutter parts but is a lot heavier.

[@jasonjulian1]

If they come out with the flat bit kit…. I’ll buy it to use on my Waves. This is a surprisingly good tool. Of course, since it copies what is also a good tool. Which tracks.

[@The219Beast]

Definitely picking this up. As far as the warranty issue concerns me is that it’s less than half the price of the wave. I’ll buy three of the Gordon’s before the wave.

[@Cascade1911]

I got my first wave in the mid 90's. I carry one nearly every waking hour and not a day goes by I'm not using it for something. In 2005 I used the screwdriver for a pry bar and snapped it. Sent it to Leatherman and even told them what I'd done. They didn't have the exact parts so they had to replace it, no questions asked. Lets see how this $40 wonder does after 20 years. If it's still in use I'll be impressed.

[@workingcountry1776]

Not thinking that's what they are going for. Power tools I use daily or at least weekly are Makita. My impact wrench is Hercules. I use it for mechanical work here and there when I'm away from my compressor. I'd use a tool like this but not every day... I'd toss one in my glove box at 40 bucks though

[@GromMolotok]

I will absolutely have to pick one of these up. And thanks to your other commenters, online rather than in person. Thanks for the tip!

[@sgsheff]

Love it. Love that it takes the bits. I love the bit system. Leatherman seems to be closing down their systems and tools so I'll take this any day. Also, you can buy an extended warranty on just about anything at Harbor Freight for $5-10

[@maxlvledc]

Hmm, I need to ask this

[@sgsheff]

@@maxlvledc they usually offer 1-2 year warranties. On some things I think they might be longer.

[@JS-kh5ls]

Came across your video, happen to have my leatherman sidekick on the desk so I get to follow along. Gonna get a Gordon to keep in the truck now

[@xandersnyder7214]

I have a Wave and Surge and love them both, but this new clone from Harbor Freight is priced perfectly for my 13 year old son who is in Scouts.

[@maxlvledc]

This...this is what it's about

[@scrider5493]

The plyers on my multi tool is the Go To 80% of the time, I need to grab or twist things many days and this does it. The next item used is the Phillips head and lock up on this is needed, I have had non lock up collapse, no good. Good review, appreciate it.

[@owl331]

Was watching this , called HF they informed me they had 2 left, jumped upput my shoes on and drove 5 minutes. Hahaha i shoukd have ought all they had and sold them to my work buddies!!!

[@waynewestfall8229]

Bought mine today because of this video... love it. It's on my belt.

[@jasperqualls6872]

I need to get one of these before the price goes up. Thats a killer deal.

[@jakobe75]

Harbor Freight has a "no exclusions" 10% off coupon for this weekend too! I am gonna go grab one. I bought a Bibury Surge clone recently but theres no belt clip and I love the clip on my Surge.

[@craigmooring2091]

Wow! Since my Wave is the original, it looks like I can upgrade to the current version (+ breaker and gut hook) for less than I spent on the original. Wotta bahgain!!

[@wildbill23c]

You definitely can. The original "Wave" was discontinued a year or 2 ago...so now all you can get is the Wave Plus, which is a step up as you can replace the cutter blades for the wire cutters. I sent my original Wave in to have the jaws replaced because the cutters got to the point where they no longer worked, so having them replaceable is a nice step up, but the price is a huge eye opener. I have a lot of Leatherman Multi-Tools, many are discontinued/retired though...prices have doubled on them since I started buying Leatherman Tools though.

[@chazcao5661]

Just purchased mine about an hour ago with the 20% coupon. I collect tools for fun and I bought it cuz there are a lot of folks online that are raving about this tool. Figured I will have use for this in the future.

[@llanbull]

A great beater for work. Can't wait for those coupons. Harbor freight should release a ratchet bit extender version.

[@maxlvledc]

It's patented

[@ParkerBinion]

@@maxlvledc It's patented. So Leatherman has 17 years to make money on it. And you cannot buy it because they refuse to produce enough to keep it in stock. Ludicrous.

[@arturotorres6437]

Ive been wanting a Leatherman for years now but couldn't pull that $100+ price point. I went with Gerber based on the updated options for that price point but now I can't wait to go to Harbor Freight and get my hands on that Gordon multi tool clone! Especially with this weekends 20% coupon

[@ReapersKnivesandMore]

Man. Just bought a Bibury last week. Should've have waited lol, I'm happy with the Bibury but this seems much better

[@JayBradleyRephan]

That Bilbury had a very sturdy set of ballextention bits that are magnetic / heavy / sturdy as fuck - buy an Extender that goes over the long screwdriver that ratchets - and you've got yourself a real tool here for about $55 bucks!

[@lindboknifeandtool]

When they released the bearing 8cr knife I knew they were approaching. This is awesome!

[@yell0wberry]

As a connoisseur of Leathermans, I’m normally loyal to this particular brand, but this Gordon definitely intrigues me. This is basically the only video that would even cause MacGyver to pleasure himself.

[@sociopathmercenary]

Might have to pick one of these up. I typically lean towards light EDC. Have a Gerber arm bar that I love because of the full hex bit compatibility. I just don't use most of the tools on my full size multis

[@RobSchwabRandom]

The Gordon, Biburry, SQT, and Workforce clones are probably the best Leatherman clones out there currently; if you were curious.

[@DeedleEdmonds]

I was on the fence about this. But with Roxon actually listening to feed back and the possibilities a Flex seemed like a better option.

[@JB-vf4uv]

My pliers broke as soon as I used them. Looks like a bad heat treat. Will be returning tomorrow

[@maxlvledc]

Let me know if it happens again

[@BeefT-Sq]

@@maxlvledc As I said, test the strength of that Chinese communist steel before deeming it a "steal".

[@MylesDavid]

I really wish it had the regular universal size but driver like the Bibury does! Simply makes a thousand time more sense for easy access and replacement of bits!! 👍🏼👍🏼👍🏼

[@clydedoris5002]

I have every bit I need would be nice to swap around

[@adamantiumpiggy6157]

I was always a Leatherman fan. Have had ton's of models from the very first one and have never had to use the warranty once! That being said, the reason I have never had to use the warranty is that my biggest issue with multi-tools is loss or theft (mostly theft!). Therefore, the extended warrantees means didly squat. I buy the knockoffs now. Leatherman has gotten way too expensive even if the quality is a bit better. Heck, I prefer five cheap Chinesium 10mm wrenches in my toolbox, over one missing Snap-on now that respect for other people's property is so low.

[@clydedoris5002]

I keep cheap hf tools in my car if it gets stolen I won't really care about the tools

[@detroitdan8487]

Am in need of the tool. This review is perfect for my purchase at my favorite store.

[@deykno87]

Driving there now!!! If only the cutter was replaceable… I can use my leatherman bits and ratchets it’s over!!!

[@maxlvledc]

I prefer this, stronger

[@Castleknight]

Needs a 1/4” bit!

[@jimmypennell8831]

If it is damaged harbor freight will replace it on the spot

[@jimmypennell8831]

Well I'm a IT member so I think it extends my coverage on certain things. I'll definitely have to check

[@billybunter3753]

​@@CastleknightJust use a bit extension bar and bingo!

[@coldwarrior78]

I still have my original Leatherman. Haven't been able to justify the cash for new ones. Going to try this.

[@diemman70]

Just like Icon and Snapon. I’m buying one.

[@tjtobin86]

The gut hook is a nice addition (especially if you use it as intended, ie, a gut hook for field dressing animals).

[@appleztooranges]

Leatherman getting their lawyers like snap on did back in the day!

[@maxlvledc]

Nope, patents expired in 2018

[@appleztooranges]

@@maxlvledc really? Didn’t know that. I’m shocked how well this tool is. Or looks. I’d like to beat the hell out of it

[@jakobe75]

unlikely....since I believe their patents are expired, really nothing they can do except innovate and move forward with new tools. Its great for the consumer because they will get very similar quality without being fleeced by Leatherman.

[@AutieTortie]

Expired patents. No need for lawyers.

[@gunfighterzero]

Expired patent, just like their buck knife knock off

[@notcherbane3218]

I love the hook It's really comes in handy I found multiple uses for it.

[@deykno87]

The mods are endless might put a real leatherman head on this… they should have done an ICON grade model of this!!! With d2 steel

[@andrewdarowski1975]

I dunno, I think D2 would be a mistake. Not that many people actually daily drive their multi tools. They're usually left in a bag, box or glove compartment until needed. And, if others are like me, I use my multi tool blade for stuff I don't want to use my pocket knife on and it doesn't get the care and attention it should. D2 could easily rust whilst left. I think an 8cr multi tool blade would be great. Stainless, easy to sharpen, and handles neglect well.

[@NiSE_Rafter]

@@andrewdarowski1975 I personally do use my G10 Charge+ w/ the S30v blade as my primary blade maybe 30% of the time, although I don't see most people with a multitool in their edc and an 8cr makes so much more sense in a cost to performance ratio for this kind of thing so I mostly agree. I'm planning on picking one up to swap out the suspension nxt in my truck because I hate that piece of crap (tools are loose and trying to tighten pivots didn't help, blade always flops out, very flexy frame leads to poor plier performance).

[@andrewdarowski1975]

@@NiSE_Rafter I want a Skeletool Cx for EDC, but, I have a feeling that they'll release magnacut skeletool soon because it seems too logical not to.

[@deykno87]

@@andrewdarowski1975 that means it won't happen... It makes too much sense

[@1gymbo1]

I got a Wave + for my wife a couple years ago. This Gordon and the Wave would be perfect if they added an awl. I have a Surge for my truck, and its got me out of a couple jams, especially with the bit kit, changing out a coil pack on the highway. I carry a Rebar for work. The large flat head broke, so I changed it out for Wave scissors. Almost perfect except for the fit/finish. I have a Victorinox Huntsman for hiking/ EDC.

[@gunsnwater2668]

Amazon has a ratchet that fits the driver. Its great.

[@richieewinns]

Link?

[@neal6473]

I brought my Harbor Freight Leatherman Gordon multi tool yesterday and I love it 😉👍.

[@SprocketGames]

Wow. I hope Leatherman can keep up with innovating to stay ahead. I like "Made In USA." Hopefully Leatherman wont go the way of the Mag lens flashlight company who got passed up by the competition.

[@wildbill23c]

I honestly think Leatherman is headed that way...nothing new out as of late, they just keep coming up with different colors for some of their multi-tools...well who gives a shit that xx Leatherman now comes in 50 different colors, how about making some new tools instead, and keeping the prices reasonable. Made in USA is great, but when the competition is kicking your ass in innovation its time to stop the nonsense coloring book tools and start building something new. Leatherman has relied way too long on their innovation of the multi-tool, and has gotten way too comfortable in the top spot and every other company out there has surpassed them in innovative features, price, and designs. I love my Leatherman tools, but a lot of people on here are the same, $120+ for the Leatherman Wave....buy 2 of the Gordon Multi-Tools and still have money left over.

[@FranciscoMartinez-dg2ku]

Had a Leatherman Wave, loved it, never rusted and retained a razor sharp edge very well. Others loved it too apparently cause it was stolen....i might give this a chance because $ is tight.

[@nabillaaroussi2965]

I don't understand the leatherman prices ... I mean the quality is not always good ... The steel sometimes is 440 or 420 ... And they still go tripling or quadrupling prices prices compared to other companies !!!

[@Heikki_Finland]

The warranty is surprisingly expensive. You are paying for those few people that abuse their tools and always send them in for repair, while it would be better for most people that Leathermans were sold without warranty but were user serviceable with a good supply of spare parts available. That way you could also modify it to match your needs which is what many people want.

[@jamesbooth3360]

That's an ideal survival multi-tool, and the magnet might be useful to magnetize a needle for a makeshift compass. An auger/awl would be great.

[@manofthetombs]

So, personal opinion here: I have an original Leatherman 1984 model that, not surprisingly, I bought in 1984. It is on my hip this very day. Battered and bruised from the decades, but still 100% functional. Still made in Oregon, Leatherman tools are American made! So, why would I consider a cheap, Chinese slave labor produced product?, that may last a few years, because, your video is only introducing the tool, but you have no long term use of the product to prove it has any long lasting value. Leatherman also has a lifetime warranty, but in 40 years, I have never had to have my Leatherman replaced. You be you. I'll be me.

[@EfficientRVer]

Consider this. The only factory paycheck your Leatherman contributed to, was paid to a factory worker 40 years ago. That IS NOT supporting the US economy today, AT ALL. The clone I bought today at HF, contributed to the paychecks of the 5 or so folks manning the store, plus some US truckers, longshoremen, marketing geniuses, sale-flyer printers, and countless others. I lose my Victorinox Swiss Army Knives, before I can break them, also. So I keep the rich folks in Switzerland employed, no Chinese "slaves" nor US workers involved in that case. But I think if I can catch my favorite SAK on sale for $40 or $50 (from $100+) occasionally, then it would be nice if a Leatherman Wave showed up at Costco or Sam's for $50 once in a while. But they don't, so today I spent $32 on this Chinese gem instead, and contributed to both the US economy and the Chinese economy. Go visit China before assuming all workers there are "slaves". The original growth of the USA and its economy, was largely based on ACTUAL slave labor, widespread child labor, and some really horrible working conditions in mines, factories, construction, sweat shops, etc. Just because we went through that phase long ago, doesn't mean that other countries don't have to go through it on their own way up the economic ladder. Here in the USA, we build nuclear subs and business jets and 18 wheelers. Sometimes we build airliners well, sometimes poorly. But we leave the making of consumer-level tools to other countries now. I'm OK with that.

[@manofthetombs]

@@EfficientRVer Well you definitely showed me, didn't you?

[@maxlvledc]

I respect that. I also buy between 10 and 20 leatherman tools per year (no joke). My issue with them is not their price..but their QC has gotten atrocious over the last 5 years.

[@AdministrativeReload]

I have lived in Oregon not far from the Leatherman factory for as long as Leatherman has existed. Suffice to say, "Made in Oregon" does not hold nearly the same meaning it held 40 years ago. If Leatherman was still putting out OG quality, I would agree with you. But they don't, so I don't.

[@scratchbuiltreplicas824]

25 year warranty for LM. I am obsessed with my Wave Plus and NEVER leave the house without it. I use it all the time and I won't give it up! I also think this tool looks cool but would not go buy it since I have the actual Wave Plus. I can see for people who can't afford the Wave Plus BUT for me quality over quantity and I prefer U.S.A. made.

[@JamesWilson-bv3ii]

Just picked one up, I'm impressed with the build quality. The knife blades have a good edge for factory edges. The files work well, no peeling on the diamond file yet, don't expect any either, I use that file daily. The scissors work well, no snag, nice smooth cut. The locking mechanism is good and strong, very positive lock, no slipping. For the price I'll be keeping a couple as back ups and in my camping gear. If you need a multitool and you are on a budget definitely get this, for $40 bucks it's worth it.

[@maxlvledc]

What do you use the file on?

[@Kage339]

If only they made the bit driver 1/4”! A magnetic 1/4” driver would put this way ahead of the other clones.

[@sda4jesus1]

YES!

[@jon10231]

This one reason is why I will stick with Walmart/Ozark Trail version. I use the bits daily.

[@sitbone3]

Walmart has a great mini, multi-tool in the camping and fishing dept. Around 10 bucks.

[@curtelverd4008]

I just read on the Harbor Freight website that these have a lifetime warranty! Never mind, for some strange reason it says it at check out not on the webpage for the tool itself.

[@alphakennybody2583]

90 days

[@maxlvledc]

??? Link??

[@alphakennybody2583]

@@maxlvledc Warranty Information We guarantee this product to be free from defects in materials and workmanship 90 days from the date of purchase. Limitations apply.

[@curtelverd4008]

@@maxlvledc wierd. On the site for the tool, it says 90 day. But when I put the item in checkout, it says lifetime warranty?!

[@ParkerBinion]

Warranty Information We guarantee this product to be free from defects in materials and workmanship 90 days from the date of purchase. Limitations apply.

[@larrygerow2638]

I ran over to my HF and bought one. It’s a fun tool set and there was a member sale today

[@Crangaso]

Let's goooooo!!!

[@josephf7260]

Great Video!!! I was about to go out today and buy the Leatherman Wave- but am now buying this clone- thanks for saving me nearly $100!!! Leatherman better start pricing competitively🤣🤣🤣

[@gerttownrecords845]

Kinda glad to see Leatherman getting it handed to them. I’m still pissed about their anniversary rollout. How they handled it. I’m all on the Roxon train right now. Maybe this will get Leatherman’s heads out their collective asses and get back to innovating.

[@ShootingSportz]

I wasn't quite sure of the quality but this video sealed the deal for me! Going to have to pick one up.

[@DanielTAGyota]

Just like with Glock, just like with Snap On, this isnt 1980 anymore. Companies that were seen as the tried and true that continue to not innovate & not take customer feedback are getting blown out of the water by those that do, with more features and more value

[@NiSE_Rafter]

I agree with the Snap On comparison but Glocks still aren't really that much more expensive than their competitors and have higher QC + reliability. One of the "it just works" options on the market. Yes I know the dagger performs as well 90% of the time, but there's also been plenty of issues with the micro-dagger and sabre dagger. Would rather get a used glock than a new dagger. Shadow Systems is more expensive for not much more performance. P320 is more expensive with a mixed reputation. More niche options like Canik are doing well but hard to find holsters and accessories for. Please don't misconstrue these statements as me being a glock fanboy, I own the other brands like Sig, S&W, Ruger, and etc too.

[@DanielTAGyota]

@@NiSE_Rafter Canik and S&W, Springfield hellcat

[@AutieTortie]

​@@NiSE_RafterLiving in a dream. Gaston got you by the balls. There are PLENTY of pistols that blow Glock out of the water for reliability and "just works" factor. At a much lower price and with real triggers and real (i.e. non-plastic) sights. Gaston got you by the balls and you clearly enjoy it. 😂😂😂😂

[@NiSE_Rafter]

@@AutieTortie How so? I only own a single Glock out of my 6 handguns and it's not even my carry gun. If he had me by the balls at least half of them would be Glocks. I'm just being realistic.

[@lindboknifeandtool]

Nice perspective.

[@mfridmanyt]

I’ll pay extra for American made.

[@EfficientRVer]

Let us know when you do that. Many people say it, but hold onto a worn old one and don't buy either to replace it.

[@mfridmanyt]

@@EfficientRVer I just recently bought a Gerber 400 series tool on eBay. I think I paid $40 for it made in the USA.

[@MrCabimero]

Any chance you could do an upclose slower detail on how you bent that tab to remove the one tool? It was so quick and I couldn’t see what you did. TY

[@maxlvledc]

Sorry, bend it so it's straight up and down. Aka Bend it a little bit toward the plier head.

[@nightfall8764]

Harbor freight doesn’t check any kind of batch numbers. Just buy a new one return the broke one. Worked there for a while… talked people out of the stupid extended warranty all the time.

[@johnp241]

Well thanks to this video i picked up 2 this weekend. Very impressed, excellent product for the price! Thank you so much for the heads up!

[@tspfl9073]

Non standard bits, heck no. Amazon.

[@usernameisusername]

You are correct 💯

[@mpz24]

Just ran out and got one on lunch. They didn't even have them out for sale yet. But brought me one from the back. I can't believe how similar they are. Great quality and It even has the hidden loop for a rope knot pull ./tether. .

[@RUNNINGWylde-wq1bi]

We won't have any American companies soon

[@maxlvledc]

Disagree I know too many successful innovators...what we won't have are large American company's trying to justify "good enough " products for high prices.

[@EfficientRVer]

We have better things to make than pliers.

[@jasonpoole2093]

Actually, I just read the other day that American manufacturing is on the upswing and apparently has been for a while. I think we are slowly catching on that we can't afford to abandon everything we make to overseas.

[@jeyroot]

I was finally able to obtain this great gizmo, I reside in Las Vegas! I found it in Gilbet, AZ. Haven't been able to find since!

[@tomasscott6414]

Harbor Freight is a really neat store. You should do a budget guide just on Harbor Freight.

[@NMWanderings]

Looks like a good alternative at 1/3 the price! Just a note however; my Wave has 0 play in any direction on the blades. It also has NO brass washers. It's about 16-18 years old.

[@curby01]

I love this I’m gonna pick one up the next time they send out a coupon. I went and got the multi force after your review and absolutely loved it and carried it daily over my wingman until I lost it at work. Love the reviews man keep it up

[@speedRacer05]

I will certainly be purchasing one of these. Great review! Thanks!

[@FischerPrice74]

The fact that the pocket clip comes on the tool is a win. The pocket clip for the Wave was like $13 after shipping since you can't get it in any store. A whole clone that looks to be the exact same for 1/3 the price is insane.

[@KlingonCaptain]

I live two blocks from a Harbor Freight. Since I need a proper multitool and don't own one, I will definitely be going with this Gordon Multitool.

[@JKLauderdale]

Excellent breakdown, what I WISH I could find was a LM Crunch replacement

[@dustymccraw7715]

bought last one at my local HF. VERY IMPRESSED by quality and features. this puts Leatherman pricing insanity in proper context. And i hope HF develops a line of multitools of this quality. i'll buy at least one of each :)

[@jmgathg]

The deep pocket clip compared to the Multiforce or the Leatherman is really nice. Keeps the tool completely in your pocket. And it comes very sharp which is appreciated.