DON'T BUY A FULL TOWER - BUY THIS CASE INSTEAD!

[@imquokkacola]

When an NZXT H6 Flow and a Fractal Design North love each other very much…

[@Abhinav_Nayana_Sailen]

How much? 🤔

[@vensroofcat6415]

Flow and North. You really know your stuff 🤣 And one hour later after consulting with their kindergarten friend your 5 year old will ask if they can have children too. Stap.

[@MrLacimossajr]

Lol.. what a coincidence. I use h6 flow and fractal design psu😅

[@Daskanoess]

@@MrLacimossajr Same 😄

[@askaliu2943]

Hyte style top vent gaps needs a shout out

[@Terry-cw9ty]

A quick tip on the wood finish it's not a defect rather a wire brush application done before the staining stage which accents the grain, it's beautifully done & I haven't seen any other case designer even attemp it as it's very easy to mess up if you get over zealous. The styling is great even though some case manufacturers are doing this airflow design.

[@uskiuski7863]

Just want to say I do appreciate your camera quality and the shots you use are nice and cinematic, shows the products very well. Video quality is great!

[@bladactania]

This is a pretty cool case. Quite a number of attention to detail points (side panel notches, grommets, cutouts) and those fan brackets are really well done. A shame the case is so flexible with the glass removed, but probably still acceptable. The overall shape is not my cup of tea, but definitely a brand I'll be looking at next time I need a case.

[@itsamememario545]

Another thing worth pointing out is that in the H6 Flow, to squeeze down the size of the case the air passage in front of the front fans is curved and makes airflow a little awkward in theory. That's not a problem in the APNX V1 as you can see the the walls are straight

[@jonathanryan9946]

Just of note, this case is designed around a top mounted 360mm AIO that in a push/pull configuration with 30mm fans on each side. That's why the motherboard can be repositioned down, to give you plenty of room for that AIO, and why airflow going up isn't a bad thing... if its watercooled with a top mounted AIO. This video went air cooling instead, which is useful data, so you'll know how it behaves if you don't watercool. However it also doesn't highlight what it's designed around either.

[@89tsupra]

You can re-pin the LED connectors into the unified FP header

[@timofaust1315]

This one is really nice and cleverly built. If I would not own the fractal north, then this would have been a solid alternative

[@averytucker790]

Even though I like dual chamber PC because of the insanely easy cable management. The main reason I like these cases over the PSU shroud ones is that you have room for fans on the bottom and top of the case at the same time. Which means WAY better thermals.

[@AlwinCrasto]

Not a fan of the massive desk footprint of these cases. I wish manufacturers gave the mATX form factor some love. I want an NR200P but for mATX and ATX power supplies.

[@adpt_music]

Lian li a3-matx is the closest thing there

[@JoselitoBurrito]

Beautiful design. Might be my next one.

[@mboiko]

I think there's a reason why it's called V1...there will be a few changes to this design coming, but a good first take....and I agree, it does appear to be the love child of an NZXT H6 Flow and a Fractal Design North.

[@KellyWu04]

APNX’s other case is called C1. I don’t think the V in V1 refers to version.

[@OmniMau]

Case definitly look awesome in my opinion but the frame structure seems a bit weak and concerning with all the wobble its putting me off a bit

[@MaheerKibria]

I love the way they did fan brackets.

[@dunastrig1889]

Really liking the look of this case.

[@McMeatBag]

The black and white with the wood looks really good

[@RafitoOoO]

Cool that you had the receipts they started developing it on their own. With that said, I don't think this angled front/side fans work. I like the regular square cases.

[@HitMarkersAreFun]

the Lian Li 011 style cases, along with the Hyte y60 and now this case design are trying to all do the same thing, push air around from the side panel while leaving the front panel clear so one can see all the cool internals. Air going around a 45 degree bend should lose less pressure than going around a 90 degree corner, so airflow should be better for this apnx or hyte 60, assuming same fans and setup is used in each. but i'm with you on the aesthetics, i like all three, but I like the lian li 011 style the best

[@RafitoOoO]

@HitMarkersAreFun yeah, I understand the physics but imo a pc case is like a piece of furniture, it will be in your desk all day every day, it should be something you're pleased to look at and that angle kills it for me. Like two sofas being equally comfortable and of comparable price, I'm sure you're buying the one you think looks the best.

[@HitMarkersAreFun]

@@RafitoOoO lol, if only my pc could sit on top of my desk ... but that's a discussion for another day haha

[@Emm64x]

I much prefer the placement of the front IO (power button etc.) on the H6 flow than the APNX V1

[@McBane.]

Will stick to my H6 Flow, great to see some competition though :)

[@ArdaSReal]

Looks like a H6 with a skin on lol I probably would have gotten it if it came out before the h6 flow

[@SebastianE18]

I've built 4 PCs for me and family using the H6, I love the unique design so incredibly much.

[@outlet6989]

I wish I could make money as fast as companies make new cases.

[@KyDme]

I'm going to get this for my new PC case!! Worth it!!!!

[@SpudLord_PhD]

So I do some wood working on the side buy helping one of my friends who does it as a side job and you being picky on the quality of the wood made me laugh. Wood is like a wild animal. With pieces that thin and small trying to pick out perfect pieces would drastically increase the price and limit the amountproduced. Yes the pieces you shown too you may look bad but that something that can be very hard to control. There are tons of factors at play and we'll I'm petty sure that's minor compared to something like a pieces being cracked or having splints on them. All in all I think that case is beautiful and a great option if you want a wood esthetic and still want that fish tank look to it. Thanks for the great review.

[@garryr]

amazon links for case are broken. Case already done?

[@vensroofcat6415]

Another nice furniture review.

[@guangdali1762]

As a Canuck... this case seems to not be available in Canada, and not listed in their Countries that retail for them. so....Yeah if I would like to go for this options. Where can i buy this?

[@sortacoolmaybe]

wow this is actually a really cool case

[@bryanngo759]

looks gooooood

[@gravef1ghter]

Dmitry, you are the case review king! Thanks!

[@Shizaho]

Would you recommend me to get the APNX V1 or the NZXT H6 Flow?

[@hotdogsarepropaganda]

watch the video, especially the conclusion. the fan brackets are better, it runs 1 degree cooler and has wood bits for an extra 20 bucks

[@Yoogaki]

What's that desk?

[@NS-xu2hh]

Any chance a 420mm fits up top?

[@mikenzaa]

Does this support back connect MB like MSI Project Zero?

[@dangerousfox123]

Man I just got a Fractal North! This looks even better

[@ist6804]

wow the old very thorough Dimitri is back

[@nDyQL]

Hey, Do you think, that a Corsair Shift would fit into that case? Seems like it wouldn‘t :l I would love to see a V2 with swapable Storage/PSU positions 👀 That would be an instant buy for me so i can build a new Custom Loop 👀

[@BTaesthetics]

Still the 🐐hope you're doing well!

[@HardwareCanucks]

Thanks man 🥰 all good over here, just trying to be a good papa 🙌 -D.

[@carlkidd752]

I've Used Corsairs (discontinued?) Carbide Air 540 in 5 builds, Fractal North (just that bit too small, but elegant) and MonTechs King 95. None of them allow Arctics LF AIOs to be roof mounted. Maybe MonTechs and Fractal Norths XL versions will???? I really like the ease of building and looks of the King 95 and would use their PRO version in the future. The XL version if a LF3 could be roof mounted, the standard sized one if not. I also prefer front IO as dust is ever present where I live. My PC cases have all sat where I look at them, so form is as important as function.

[@faquirmdiqbal1018]

What's the next material for cases in few years from now on..?? Rocks? Stones? Or maybe Concrete..?

[@Pyovali]

I never expected this wood thing to become a trend

[@burnsyd17]

I really like. Vertical GPU mount options?

[@ImKairyu]

yes, they have a kit meant for the case

[@justatim8143]

I was always a fan of the NZXT H6 FLOW Compact for the lower front I/O but this case has higher air flow with less restrictive filters. The back panel lacks air flow as the holes are to far apart and restrict air and would say at most 40% air getting through. This case for me has to much room inside either on top and bottom of ATX motherboard and the H6 is more compact but lacks some airflow.

[@jonathanryan9946]

This case is designed with a top mounted 360mm aio that has a push/pull configuration with 30mm fans on each side. So overall 90mm (ish) That's why there's so much room up top and why you can reposition the motherboard down. Plus why the airflow is designed to flow up. Unfortunately they tested with an air-cooler in this video, on a case designed for maximum aio watercooling.

[@Paoooooooooo8375]

12:01 that amount of wobble on the standing table though...

[@HardwareCanucks]

That’s just my desk. It’s not very stable. -D.

[@lesiux1]

this or Antec C8?

[@StealthCN]

Silver Design O11 North

[@joshuwood7276]

mine did not come in two boxes

[@Hahnck750i]

Funny how mobo standoff screw holder is being praised as a inclusion today when it used to be included back in the days with non entry budget coolermaster cases as default. like around 15 years ago

[@j.p.h.8126]

H6 Flow North 🤣

[@HardwareCanucks]

Haha 😆 so true! -D.

[@Intermission42]

Looks nice, but case width is just too important to me

[@speel1959]

'Wallpaper' link anyone ?

[@carcinisation_0]

NZXT H6 but looks actually good.

[@jamescjh1215]

4x P28 full speed is just overkill, and it's definitely not a good comparison with the rest of the case you have on the list.

[@leftcoastfunk]

Doesn't look/seem too bad but misses the mark on a few things you pointed out (and some you didn't). The price point is a little steep without including any fans. The build quality/flex should be better on something in that price range. The sad sad sad "accessories" box should be considerably better (extra screws, mb standoffs, bits, plastic clips, polishing/dust rag, etc) Lastly, I'm continually frustrated by these massive cases that don't support 420mm radiators. 3x140mm is barely bigger than 3x120mm. Either give us a tiny bit extra height or a tiny bit extra length. Since most cases that are made to fit 420mm radiators are considerably bulkier full tower cases, I find it curious that there's not many in-between cases that can fit one Even if not giving enough room for a 420mm rad, allowing 140mm fans on that side intake but then only having space for two is a travesty

[@HVTILLVIB]

so is it peak or is it mid

[@LimeWight]

peak useless

[@abduktedtemplar]

That hoodie makes me sad. RIP EPOS gaming division.

[@taomahNEGEV]

The wood is just not worth the steep price over the brilliant H6 Flow.

[@WheeledHamster]

So not peak?

[@alexsanrainbow]

man see wood = man is happy

[@KK-fi6ms]

Too much wasted space. I wish more cases focused on reducing desk footprint.

[@leviathan5207]

Put it on the floor then...

[@itsdeonlol]

Nice case!

[@HiCZoK]

too wide. who got a desk room for this?

[@TewaAya]

Chopsticks and stained glass, so much air and pressure being drawn together.

[@hrk470]

So worse thermals and bigger footprint equals better case? I disagree.

[@ArdaSReal]

Looks cool tho

[@hyrel668]

The thermals he showed are very good though?

[@LimeWight]

i wish i could git 6 of these monstrosities on my desk, 1 does not take enough space :(

[@v0ldy54]

Ah yes, another giant case with some wood accents hastly stapled to get on the bandwagon, that's what the market needed.

[@JustSomeGuy009]

I think you are very confused on what real wood is supposed to be. You seem to want it to look more like fake wood. Perhaps speak to an actual woodworker before making yourself soind extremely foolish talking about the "finish" of the wood on these cases.

[@HardwareCanucks]

I think you misunderstood. I’m not talking about the looks of the wood. Some sections of the wood don’t have proper seal, as you see in the macro shots the bubbles shouldn’t be there. -D.

[@justeddm]

This guy loves anything with wood 😅..

[@hotdogsarepropaganda]

I already have an h6 flow for my next build. I like it more for its cheaper price and 3 fans and I really prefer the feet on the h6 flow vs the design on the APNX V1 but the wood does add some extra class as well

[@timofaust1315]

Weird flex! 😉

[@Ogk10]

I'm sorry but are pc sizes evolving backwards? All of my cases in the past 25 years were smaller than these "modern" things. Just look at all of the blank air volume inside. A waste of space that needs extra cooling power (and fan noise) to exchange the air inside. And don't come at me with the "go ITX" nonsense, just take a look at the N-ATX v2 case for example. It can fit a full pc in 15L without sacrificing a half motherboard...

[@madestro]

Peak video as usual from you fellas, but the case itself? I gotta say, meh

[@pranze3484]

Peak aquarium...

[@fedoruccio]

I will just wait when proper aluminum cases will get back without any stupid glass. All market right now is ridiculous: one only could buy ether aquarium or old case, and all reviewers are at fault here for promoting this stupid mode of having all those stupid Christmas lights in PC case. It is kid of despicable imho... All I want a modern good case without any stupid glass or RGBs. GROW UP and stop promoting this nonsense!!!

[@nadeenasnake]

I'll never ever understand these wood things...

[@ArdaSReal]

What do you not understand about wood bro

[@Visstnok]

​@@ArdaSRealIt's a PC. Has as little appeal as a wooden phone case.

[@WheeledHamster]

Premium and luxurious feel. Like wooden dash on cars you know, except on a PC it's dumb AF!

[@Violet-ui]

Extremely nitpicky on the wood

[@HardwareCanucks]

Why shouldn’t the wood be perfect? The quality on the North is way better. -D.

[@Violet-ui]

​@@HardwareCanucks A more complex design from a much smaller brand and it doesn't cost a fortune. I feel like you shouldn't be that nitpicky on something like wood, which is also generally just less consistent to manufacture. I doubt every North is perfect either

[@drunksquirrel2051]

Make me.

[@marioh5172]

Space for only two 3,5" drives is no go for me. Ciao.

[@fanofentropy2280]

If you put it on the right so you can see your parts through the glass, the wood & front panel io face away from you. If you put it on the left, the wood & io are ok, but now the window is redundant. This is just poor design and looks super awkward imo.

[@xnitropunkx]

Thank god they have an option to get rid of the wood panel

[@CHADCHOPS]

Another fish tank smh. These company's need to stop.

[@gelul12]

Ugh I’m so done with all these fish tanks

[@zakkeith1508]

Can we please fucking stop with the wood on pc cases

[@salestics4205]

.

[@timkey87]

They need to stop adding wood bars to every case, it's not even fun anymore

[@Sokol10]

This case flexibility is irrelevant, one will not put flexing forces in the case in normal use.

[@Games_and_Tech]

It's just tiny bit wider than normal case because it sucks, and only support 120mm fans on the back or rear side, which noise pitch is more annoying than bigger fans.. so nothing new, nothing exciting

[@01dom]

yea this case aint worth it for the price

[@zCreepingDeathz]

This wood trend needs to stop. Looks awful.

[@lasvista2tech]

pentagonal cases are cringe, this new trend better die off

[@dvnwllms]

I don't know what it is about this or the NZXT version but I'm just not a fan. The angles are off putting, & the wood looks tacked on. I'm glad some folks like it, not my cup of tea though.

[@Visstnok]

Yuck, that is the fugliest case I've seen in a while. Lost me at wood and muh angle.

[@jezwinni107]

Another big ugly pile of metal and glass, but this one tries to disguise itself with a wood panel.

[@AquilaeYT]

These cases SOOO boring.