San Francisco be like W202 PC case 4738 3rd St, San Francisco one room, no bath, many vents. $3200/month
@ojl50557 жыл бұрын
XrSFeed I LOL'd
@HardwareCanucks7 жыл бұрын
haha you win the internet!
@lyrix74797 жыл бұрын
+HardwareCanucks xD
@TheRealSkeletor7 жыл бұрын
Wouldn't it be two rooms?
@Homewrecker13377 жыл бұрын
I was looking for a case since I'm going to be picking up a mini-itx motherboard tomorrow, thanks!
@taiefmiah7 жыл бұрын
Miles Manner perfect match for your itx board
@Mustikkakeitto47 жыл бұрын
taief miah LMAO
@CheeseyMilkshakes7 жыл бұрын
Miles Manner I hope you're joking
@KnopsLPs7 жыл бұрын
this is pro level "find the motherboard". don't get lost, brave man.
@havoc910tw7 жыл бұрын
you can get 4 itx motherboards in that beast
@nikitaz987 жыл бұрын
I'm glad that you said "matryoshka" without accent.
@SlopeiZCSGO7 жыл бұрын
yes
@theredduck20717 жыл бұрын
Я знал что он Дмитрий не просто так!
@Ben01tM7 жыл бұрын
Никита Азаров Not a surprise since Dmitry is Russian.
@jort93z7 жыл бұрын
well makes sense since he has a russian accent. though its very slight by now. a few years ago it was more noticable.
@niter437 жыл бұрын
Slavic/Russian wooden doll that contains it's smaller copy inside. And inside that copy is another copy. And... Well, regularly that is repeated from 3-4 to 7 times.
@andiders7 жыл бұрын
Not sure if it's big enough for my Raspberry Pi. Can someone confirm?
@time81017 жыл бұрын
you need like 2 of those cases to fit that in
@id1043354097 жыл бұрын
Depends if you have the Pi3 or the older models. You can fit the Pi3, but you have to cut it, or the case.
@samaravadi37 жыл бұрын
Andiders The Pi might be a bit large for this case
@rkimbers12346 жыл бұрын
I tried. No dice.
@TECH3_5 жыл бұрын
nah i think you need something custom like a moded 42u server rack
@MattyP626187 жыл бұрын
Put a mini itx motherboard in it lol
@eskci07 жыл бұрын
This.
@Stropitor7 жыл бұрын
Is Sparta!
@GuilloTheMatatan7 жыл бұрын
LMAO
@yTonykaku6 жыл бұрын
Where is pt 2?
@dashmeshsingh5647 жыл бұрын
I could live in that. With my complete setup, some mountain dew and pizza.
@ashupashu55597 жыл бұрын
Dashmesh Singh and a 6700k
@gravitygear7 жыл бұрын
where is part 2? I want to hear more about this thing.
@bamcorpgaming59546 жыл бұрын
i cant seem to find part 2......
@pastubbs7 жыл бұрын
I don't know if you know or not but most of the panels are reversible, you don't have to have the the external drive section on the left side with the window. I rotated the front panel on my setup with the external drive bays on the right with my server and all of it's hot-swap-able drive bays then my main system on the left side with the window, with most of the wiring for the main system tucked away on the non-window side. Then mounted two 480 rads on the top and two 120 rad on the rear of the case. The top of the case can pretty much fit whatever size radiator you want. The case is huge though even with two full systems in, but so is the Caselabs. I actually considered Caselabs first but their double wide doesn't support dual systems by default and by the time I configured it for dual systems it was over $1000. I got my W200 for $425 with free shipping from Amazon that's a lot cheaper then the Caselabs. And while the Caselabs does have a slightly better build quality and more feature, the real question is, is it worth paying twice the money. I guess it depends on the person and how much money their willing to spend. I wouldn't go as far as calling it a rip off of a Caselabs case, but does it share similar design feature sure but a lot of product share similar designs. The important thing to realize here is that there is now a more affordable product in this class of cases.
@cmusic527 жыл бұрын
I think that case is ideal for those that want to have a system to do the work, but still have a system to play on while the work system runs, have a system to play games on while the video is rendering, or have a computer to play Separate from your work computer, or have your NAS/Plex server separate from your gaming Desktop
@dazeen9591 Жыл бұрын
or for someone like me who just wants to put 82 fans inside it
@michaelschutt9703 Жыл бұрын
Ive been looing at this case to do a nactua pc with my dail drive on the glass side and then a nas or a workstation with massive amount of storage on the other
@hebikira916 жыл бұрын
did you even made a part 2? xD
@Dudi4PoLFr6 жыл бұрын
Still waiting for part 2 :(
@lemoulemassif6 жыл бұрын
Where is the pt2
@ke.fg086 жыл бұрын
Where is the part 2?
@JesseArt7 жыл бұрын
Excited for part 2. This thing is monstrous. I have no idea what I'd do with it either.
@ristomladich2467 жыл бұрын
i would sell it for some idiot to buy up later...
@EverythingisFire7 жыл бұрын
I'd probably use it to store & cool my Ncase-M1, lol.
@doneldTrumpet7 жыл бұрын
JesseArt i would build mini atx system... and put that system inside this case along with mini atx case... you know... for double the heat purposes
@evergreenhigh2307 жыл бұрын
I love how Chris pratt is diversifying, good for you starlord
@toitoi87307 жыл бұрын
Every video you produce just keeps getting better and better. You set the standard for tech videos IMO. Keep up the good work.
@robodog76107 жыл бұрын
It is quite nice, i could slot my PC parts on one side, and my clothing on other.
@stevenrod9897 жыл бұрын
where is part 2
@Pyenguu5 жыл бұрын
Yea wtf, I wanted to see his water loop
@arkeidian15 жыл бұрын
Yeah man still 3 years down the road he hasn’t have time to film it lol
@glenntrechel5 жыл бұрын
still not here -7/22/19
@dnitz96084 жыл бұрын
@@glenntrechel june 2020 and... Dunno
@savagedk4 жыл бұрын
@@dnitz9608 kinda lost respect for the channel due to this :) Not gonna subsribe!
@rBennich3 жыл бұрын
In wish this case had 2 rows of 5,25" bays. It would have been the ultimate hot-swap non-rack home server case.
@camdendexter7 жыл бұрын
So did part 2 fall off the Earth?
@HardwareCanucks7 жыл бұрын
+Camden Dexter pretty much 😂
@user-ci2om1wd4m6 жыл бұрын
HardwareCanucks what happened?lol
@tahsin287 жыл бұрын
camera skills r beyond this world
@MrTsengar6 жыл бұрын
Did part 2 ever happen?
@indiantechsupport19596 жыл бұрын
Its been over a year where is part 2?????????????
@chevrolet16167 жыл бұрын
This would be awesome for industrial lab control/DAQ computer. Our test group has been looking for a way to integrate a few systems together to control both of our test rigs in one room. Love it!
@g3nesisprime1837 жыл бұрын
You guys need to get your hands on the new Thermaltake Core P5 TEMPERED GLASS edition.. Such a gorgeous and capable case.
@vknsimsport2 жыл бұрын
Stumbled upon this today and my first thought was "I need 2 of these". One for myself as a Gaming & Streaming dual build and then one for my wife as a photo/video editing build for her & then the other half be a homebuilt NAS setup for both of us to share.... Then I realized I'd need to win the powerball to make it happen.
@rbuschy7 жыл бұрын
where's PT.2?
@SupernewtX7 жыл бұрын
Nice video, the reverse drop on the caddies was a perfect touch. case seems cool, but the lack of radiator support is ridiculous
@Joeheadred7 жыл бұрын
You make the best tech products reviews on KZbin.
@cipher10001015 жыл бұрын
Question, just bought this case, long time fan & sub 🤩.....where's pt.2?? 😲
@bobwarpath23953 жыл бұрын
Even today, I am still waiting for part 2
@senor-unich6 жыл бұрын
Will we ever see the build?
@QuestionmarkX37 жыл бұрын
Honestly, I actually really like this case. If I ever decided to become an independent editor (and also had a large amount of money), I could see myself creating a duel build in where, 1 system was an air cooled server and the 1 other was a beastly editing machine. But one can only dream, right?
@adolfazusa11387 жыл бұрын
where's pt2?
@matthijs12477 жыл бұрын
Wow HardwareCanucks has really been developing a personality in the last few months, great work guys!
@user-nl6zh9jb1p4 жыл бұрын
January 3rd, 2020...still waiting for part 2. C'mon, man!
@ashishpatel3507 жыл бұрын
Case designed by ikea
@EposVox7 жыл бұрын
I'd love this to combine my main build and my dual xeon build or something. But.. it.. it needs handles or some shit... the Define XL R2 is heavy enough as-is.
@TamerZiadyofIntuitiveDesign2 жыл бұрын
Lol...love the start scene. Good stuff! I just purchased mine and so excited to combine my 2 machine set up...Will have to buy some fans and cables; but this will be off the hook...
@TSLMachine7 жыл бұрын
JayzTwoCents should do a dual custom watercooled build in this case. Maybe use a case like this for his build for Terry Crews?
@dearheart2 Жыл бұрын
You might not believe it, but in the past, I have experience with a case that was around 4x bigger, 2x wide, 2x high. And it was full - there was a Unix system, dual core - and it used 6000 watt.
@ghostcell0304 жыл бұрын
Hey, what happened to part 2? Did you give up? I really wanted to see it
@ElijahLeung7 жыл бұрын
Dude that intro was fantastic especially the lip flapping scene
@dibrovaaaaa7 жыл бұрын
твоё "матрёшка" звучало очень непривычно, обожаю твои видео - 2 года смотрю каждое видео и с каждым видео качество растёт
@kamoonrathewolfgod9189 Жыл бұрын
I have this tower and I have everything needed to turn it into a dual system except for the cooling kit as I can't find the full size 600mm radiators or even the 560mm radiators. If I can get a hold of the radiators and cooling kit I will have all I need to finally build it up.
@JordanKingGaming7 жыл бұрын
Amazing job. Especially like that you cleared the air with the Caselabs folks. Keep up the great work in the new studio!
@LS-jk3fk4 жыл бұрын
whoever made that intro drank too much caffeine
@ReadySetGame877 жыл бұрын
I still have to say one of the most creative tech tubers out there
@PainIsntExist5 жыл бұрын
A cool case. I like it because it has 5.25 bays. Eg DVD, Aquaero Aquacomputer, extra USB 3.2 for new motherboards A few questions 1. Are all holes in the back plugged (eg PCIe slots)? 2. What thickness you can fit the radiator in the Push & Pull configuration - on top (2x480 / 60 or 80?) - right side (2x480 / 60 or 80?) 3. How much does Thermaltake join in the radiator mounting kit? 4. If I mount the radiator on the right side from the side, the power supply will fit under the bottom plate?
@jaredlaskey5 жыл бұрын
I cant find the link for pt.2? Did you do one for this? I just purchased my W200 along with four Alphacool NexXxoS XT45, a second EK-RES X3 250 Lite reservoir and new tubing and fittings all filled with new EK-CryoFuel Navy Blue. Should keep me busy over a weekend at some point.
@jeteon7 жыл бұрын
I think there's so much room inside, you could probably free-mount radiators of any consumer size inside the case and still have decent airflow. There isn't really anything pushing you to mount radiators on the case walls only.
@matttcameron_7 жыл бұрын
I look forward to seeing what the final product is like. It looks like it has the potential to do something really cool, but that depends on the time put in. I'm sure there are some pretty cool options for a dual system and water cooling that would make good use of the space. I would probably use it as a personal server and just cram that thing full of drives, and use a server mobo.
@KnopsLPs7 жыл бұрын
With all the space you can see at 5:45-6:30, I wonder if you could put 2 systems into 1 half with a mirrored layout. Then use the other side for storage, the PSUs and possibly watercooling (pump/reservoir) solutions. air intakes/fan/radiatior mounts on the bottom of the build side and then the top for air out/fans/radiators. Possibly a metal plate to physically seperate the 2 builds would you so desire. I'd probably place the PSUs on the top (towards each end of the case) with watercooling space towards/in the middle and storage+drive spaces below the PSU at the ends of the case.
@3vil8unny7 жыл бұрын
Lot of complaints can be fixed by taking two seconds and reading the manual. It's a very solid case and doesn't weight that much.
@hyouzanren18466 жыл бұрын
Holy! This even bigger than my XL ATX case! Time to browse some new case!
@nimrodery7 жыл бұрын
Perfect for somebody who doesn't want to delete emails, but still have them mysteriously disappear.
@MAG3204 жыл бұрын
Thats something to be proud of after putting it together. You appreciate it more
@MoayadBahajjaj7 жыл бұрын
I would not use all of it, of course, but man I really like it. waiting for part 2
@SayanChakrabortycrixus907 жыл бұрын
hey Dimitri is it possible to build Two separate systems on this.1 for editing and another for Gaming. you can do both on a single table with people sitting on either side with monitor and peripherals while the system in the middle ?
@HardwareCanucks7 жыл бұрын
Yes you totally can do that! Pretty much the sole purpose this can is designed for.
@SayanChakrabortycrixus907 жыл бұрын
HardwareCanucks wow hope you get a good rommie for rent lol😏
@davidchen54637 жыл бұрын
Calling it large is the understatement of the century
@KnopsLPs7 жыл бұрын
it's huuuuuuuuuuuuge.
@reirei_tk7 жыл бұрын
Knops this case is BIGLY!
@TheMasterFro7 жыл бұрын
David Chen it's Hugh Mungus
@CheapSushi7 жыл бұрын
That's what she said!
@MAGAMAN7 жыл бұрын
Removed the original comment. I was confusing Thermaltake with Antec. After realizing this, I did some more research into this case and ended up buying it. My current setup will have room for 24 drives (20.5 and 4 2.5) and I'm trying to find out if I can order additional rails and drive cages so I can go up to 34 drives (Yes, I can actually use them all). Overall the case is pretty nice, but the magnetic door latches don't work that great. It comes with 4 pins for it, but the manual only shows installing the top pins. After installing all 4 I found out why. The door will not close properly with all 4 pins (2 on each side) installed. BTW, this case has a shipping weight of 69 lbs. and it comes with no fans, so be sure to order some fans if you buy this. I bought 14 fans and have room for about 10 more I think.
@zacharyw46286 жыл бұрын
The way your videos are edited, excellent. Fun to watch.
@SmalltimR10 ай бұрын
That intro was pure gold lol
@richarda.k.alucasbishopojo33112 жыл бұрын
Excellent video. I have the same chassis . I was really annoyed with detachable motherboard tray but I managed to get it 3d scanned (the adjustment was making it wider). Got a great company in China who created it using cold rolled steel sheet metal. The quality is even better than the original detachable tray.
@dejf74887 жыл бұрын
The Broll is so amazing I have problems focusing on the voiceover as I'm rewinding the broll over and over again
@davidmaldonado67922 жыл бұрын
ill be using this for mining. Nothing compared what you talked about but thank you for the efforts.
@michaelfairchild7 жыл бұрын
They killed that case with spaces between the fans. That 480 rad up front and more. Caselabs case for less money and slightly less quality, if you consider aluminium-metal builds. You could mod it somehow, but for that price tag you would think for full crazy watercooling support. Oh Thermaltake...
@mrman84847 жыл бұрын
B roll on demetri himself... Glorious!
@akashrahman30907 жыл бұрын
The thing that made me smile are those USB 3.0 ports..There are so many
@Kevo19447 жыл бұрын
Damn, that case has more room than an apartment in NYC. Great review dude. :D
@mjhieusuper7 жыл бұрын
You know the best quality KZbin video always belong to Him. See him and I automatic press Like!
@PongoXBongo7 жыл бұрын
Two full size ATX builds in a single case is cool and all, but you could probably fit four ITX builds in that thing (each with its own 360 rad too). Also, you could probably jury-rig the rads and fans to workaround the offsets (maybe Dremel out the spacers?). And if would be cool to see the mobo tray hang from the top rail, and attach with a single thumbscrew at the bottom (ala SSD mounts).
@urdaddywingnut78206 жыл бұрын
Since size obviously isn't an issue with this case, it would've been nice to see TT have added a 1" or so 'wet wall' between the two sides for a nicely hidden space to tuck away all the cables a twin system case would have. It would have gone a long way in helping the end user make for 2 builds with much better cable management. Just a humble opinion here
@simonedaniel7 жыл бұрын
Wouldn't be a Hardware Canucks video without the word 'populated'.
@Balidor7 жыл бұрын
Finally, I found room to place my gaming aquarium!
@shova2133 жыл бұрын
If anyone has this same chassis and do not care for the Air Side panel, I really hate the Acrylic window panel and happy to swap it for an Air side panel. Thermaltake massiveely helped in getting me 8 more hard drive caddies alongside the clips.
@andrewheil11586 жыл бұрын
I could see a case like this being effective for someone who uses both a gaming system and a work/editing/streaming system.
@Misa-hl5xw7 жыл бұрын
So the construction is still as flimsy as the X9. Mine bent through normal use. I'll stick with phanteks or caselabs if I need something the size of a mini fridge. Thanks for the vid.
@NickRau19967 жыл бұрын
Besides providing space for a small family this would be an awesome server/gaming build
@isaiahmatthewaraneta74987 жыл бұрын
The video editing is on point! Keep it up man!
@HooverM757 жыл бұрын
I'm glad to finally see this review. I almost bought this case on my main build as I was thinking of putting an Intel build on one side with blue water cooling, and AMD build with red water cooling on the other. Also, some of the panels you have are interchangeable so you could have the same 5 1/4" slots on both sides, etc. They claim it to be fully modular, only the additional modular pieces are extra cost. I was also thinking of purchasing the P200 along with it to stack, and have all the pumps, radiators, and fans in the "basement" but now seeing the immense room that would have been super over kill for space. I actually went with a Define S from Fractal Design (based on one of your other reviews ;) ) and still have plenty of space for water cooling my Intel if I went with a custom water cooling setup later.
@dot_boi7 жыл бұрын
use the enitre of the other side for radiators. you can probably put a ton of single 120mm rads in series in the front. just have like 12 radiators for your entire system or something
@davagurodvil7 жыл бұрын
That shot at 2:45 was awesome.
@Jmz7vHD7 жыл бұрын
2:45 was sick, totally got me!
@Augie136 жыл бұрын
That is AWESOME! But too big for me. I've already got the Thermaltake View 71 Glass RGB edition. I need to learn more about water cooling and customizing cables for it to be used to it's full potential.
@SylvexDragonskin7 жыл бұрын
Finally :D Been waiting a long time for your review. Though I was looking at the 100 version.
@DigBipper1887 жыл бұрын
Just freaking choked on my bran flakes when I saw the case for scale shot!!
@DavidJonSpem7 жыл бұрын
Yo dawg! I heard you can build a computer inside your computer! 1:09
Arek R. I agree wholeheartedly 🥔🥔🥔🥔🥔🥔🥔🥔🥔🥔🥔🥔🥔🥔🥔🥔🥔🥔🥔🥔🥔🥔🥔🥔🥔🥔🥔🥔🥔🥔🥔🥔🥔🥔🥔🥔
@gizmoffm6 жыл бұрын
Thanks for the review! Way cheaper than the caselab one
@franciscovizcaino48697 жыл бұрын
the shooting for this video is beautiful great job!
@chenkaneki99527 жыл бұрын
Maybe that case are for dual or quad xeons build.
@chenkaneki99527 жыл бұрын
Hmmmm. I also can use that dual system case. One side is a dual intel xeon+ sli nvida gpu and on the other side is a dual AMD zen cpu+ crossfire AMD vega gpu
@djk85417 жыл бұрын
6 months later you still have no Vega to install... I'm all for team red but this is getting ridiculous
@Andrew-em6mt Жыл бұрын
Are you able to rotate the front cover and front panel? For example, what if I wanted to have the power buttons and the 5.25" slots etc on the right side instead of the left? I would assume this is possible since this is meant to be a hardcore diy dream case. The Thermaltake bade looks like it can be removed and reversed at 3:36 The location of where I want to put this case could mean that the window is would be facing the wrong way. Being able to do this would be fantastic
@KVAR42 Жыл бұрын
Ty for the review! Was excited, want a gaming/rendering (for work) One case solution, (it has to look good) water cooled on both systems. Not sure this is the answer.
@clarkkent9997 жыл бұрын
*_IT"S YUGE!_*
@anthonyslaughter17287 жыл бұрын
I got an old Mountain Mods U2UFO... The motherboard tray is "technically" removable but does flex. There are no dust filters or included I/O (other than the power buttons/lights). I paid a similar price back in 2010. Still using it today but I would have gone this way.
@Hoelenforscher3007 жыл бұрын
11:11 *Matrjoschka PC case stacking should be an olympic sport*
@herrraja90387 жыл бұрын
I think I knew why the front fans position aren't standard. I believe it's to fit multiple 120/140mm radiators for 2 or more socket motherboard. Preferably AIO Cooler.
@HardwareCanucks7 жыл бұрын
+Raja Jafar true but it would be a total waste for 120/140mm fans to be placed at the front.