Harley Davidson Dyna (FXDX) VS FXRS - Thrashin Supply Bike Comparison

[@waynebast4009]

I bought a 1993 FXLR anniversary model No. 51 of 800. Great story on this bike. It was around $13,000. I sold it to a friend in 2003. He just passed away July 2023 and I got the bike back after 20 years later. Crazy to be back on it at 70 years old.

[@krazykittyharleygal]

That is so wild

[@gabevigil2278]

I have an 1989 fxlr that my dad got new. I inherited it last year. Something about the fxr make you feel like a bad ass riding it. Nothing like it. Those who know know.

[@AppleJack76]

I have my dad's '92 FXLR. Our father's made some great purchases.

[@donaldcurtis9229]

I have an FXLR89 beautiful bike. Very rare custom Chrome forks came with it. It made three miles I have the rarest one low mileage

[@ispeedon287]

@@donaldcurtis9229 that should be a crime! Ride that thing

[@donaldcurtis9229]

@@ispeedon287 Why shouldn't it be beautiful bike all work to the max

[@canadianloon6433]

I know exactly what you're saying Love the fxr

[@scottyducati35]

I own a 91 FXRS. I’ve owned lot of Harley’s and over 30 motorcycles of every type. I feel the FXR is something you don’t sell you just add siblings. Special bikes.

[@GorillaCookies]

91 FXRS-SP owner. Love it

[@angelsierra1988]

I just a 1993 FXLR 90th Anniversary with 2700 miles. Original female owner. Always garage kept in climate controlling environment. It looks like the day it came out of the showroom. Love It !!

[@donaldcurtis9229]

Very happy for you.I have A89FXLR21 inch hatchet in the front 6 inch car in the back race T bars.Chrome forks only gages speedometer.My repair guy told me it was very rare.Not many built.I got one thirty five thousand original miles street legal drag bike

[@ericjohnson8482]

The MSRP on the 93 FXRS was $11,800. That was a decent chunk of money back then. Hope this helps. BTW I'm an EVO fan, better engines with all bearings and no issues with crank run out, cam plates or the cam chain tensioners like on the twin cam.

[@ehiggins7476]

Wow you could have bought economy cars for that much money in 93. Of course there is no comparison in the fun factor between the two but that was a lot of money back then

[@jerryh2954]

But the FXR just looks cooler. And it's relatively easy to get 100hp out of that 80in and upgrading the brakes is also easy so it's the FXR for me every time.

[@jamesmatheson5115]

Upgrade to twin cam front brakes for about $100

[@benjamingardner4988]

With my big bore and ported and polished heads s&s super e adjustable push rods tappets and heads roller rockers and single fire ignition its a beast and get many compliments bar far my favorite ...load pipes save lives and my home made straights will blow the chicks dress up walkin by lookin like marylyn monroes sexy ass

[@RJSerp]

Probably the best video I've seen comparing these two bikes! I'd also like to see a video comparing 1st gen Dyna to 2nd gen Dyna.

[@megastick9324]

We, ( wife and I) own 3 FXRs, hers is a custom 1982 ( first year) with a warmed over shovelhead engine. It’s a real surprise to those that expect an old shovel to run like an old shovel. We did a LOT of upgrades to the motor and installed a later model trans. The motor is around 86” now running and EVO valve train and BDL belt drive and clutch. It’s quick, nimble and smooth. We also have an 87 FXRS-SP with a 96” S&S motor, that motor makes a world of difference in performance. At around 100HP it will get your attention, and again , surprises the hell out of a lot of new bike guys with a LOT more money invested. With Dave Mackie head work and cam and a BUB pipe and Bandit clutch, it puts the power to the ground but still rides smooth all day long. The last is a Pro street configuration that was popular in the 90s. It was more of a resurrection for fun than anything else. The frames are totally different and lend well to custom work. It doesn’t handle like a stocker, but with an107” S&S motor it’s a hoot to ride and keeps up with most anything on the highway today. Cornering is more akin to any other custom type bike with less ground clearance than a normal FXR. It’s more like a cross between an FXR and a Softail. Still a real hoot to ride though. With the die-off of the fat tire “ choppers” those engines and drive trains can be found pretty cheap with low miles. Making for some great custom stuff after a little retuning. Those 90s FXRs need very little to bring them into modern performance and braking and are well worth the effort. I do admit the FXDX and street bones were some pretty damn fine Dynas though. Updating the cam drive paid big dividends on them. Still, I’ll stick with the EVOS and FXRS …

[@jamesorth1521]

I have owned both. An '82 FXR and a '98 FXD. The FXR handled MUCH better.

[@enriquecorona3184]

I own a 1984 FXR which got a springer fork, that year was they first EVO engine, love riding it, beautiful bike, oh YES..!

[@Redneck_On_A_Wheel]

Found one guys asking 4k, 10k miles us that worth my time?

[@DennisMerwood-xk8wp]

@@Redneck_On_A_Wheel Go for it! The guy is giving it away. In 5-years you will be able to sell it for twice what you paid for it.

[@jasonkoestner4630]

I had a 2009 dyna super glide and a 2000 fxr 4 in screaming eagle yellow and the the fxr when it came to handling the fxr wins hands down

[@MrAirmentbob]

82' fxrs solid lift cam via shovelhead w a kick start on it has the best sound, relatively slow but is ridden as a daily commuter via solo riding. 87' tcfxrpi fuel injected 103, stock 6 speed, cams; pulls like a freight train w manley valves hit 89 mph in the 1/8th mile drags. 91' 103 tcfxr 5 speed swap, 45 mikunni. ran for it for years as an 88 tc w 543 fueling cams, finally rebuilding bigger; was a straight work horse as an 88, 100 mph cruising no problemo. i have a 14' dyna w 57h cams and a chain drive and i just dont like riding it in comparison to the fxr's. still would like to build a sporty powered fxr. best fxr...the one you build and ride.

[@evgenynezlobin2872]

I bought myself a 2000 fxdx in 2022, I am 200% satisfied with the purchase. And I completely agree that fxdx is a great bike in its own way, it's no better and no worse than fxr, it's just a little different. Thanks for the video, it was interesting to watch

[@davidforsman3628]

Bought my first Harley Davidson about a month ago, it´s a 2002 FXD Super Glide and it is freezing cold in Sweden now so I can´t go out and ride but everyday I go in to my garage and just look at it, wrench a little bit and just enjoying the time with my new baby! :-) Damn proud of my FXD

[@THRASHIN]

You'll be ripping it down the road soon enough!

[@angeleauxparker69]

89’ FXR owner here 🤘🍻

[@johnbeasley4171]

I have a 94 FXR Super Glide and a 92 FXRS Low Rider. Love riding both of them. Wish they had more power but they are great handling bikes. I’m running Thrashin bars and risers on both of them.

[@andyreid7274]

I bought an 03 fxdx 2 summers ago. Ive put about 4000 miles on it and i am very happy with my first Harley. I put new cam tensioners in it, tires, a couple of seals. Motor mounts are probably my next winter project. Keep them greasy side down fellas! Paid under 5 grand and it had 16000 miles on it.

[@jaycosta7204]

My girlfriend owns a 1994 FXLR, absolutely love her bike!! Classic 🇺🇸💯🤘🏻!!

[@helloimjeffjones]

Great video, one thing I noticed is the dyna has a chain whereas the fxr has the belt. Even assuming the ratios are the same with the chain the power feels more direct. Might have something to do with the delivery. As an FXR owner it is a labor of love to own one which is why most people go through them 100%. Killer video either bike is a winner in my book

[@davidetchellsetchells4692]

Just keep in mind, the tsbs on both bikes, the fxr is an evo so updated cases and cam, heads if your gonna thrash it, and the twin cam is gonna need the S&S gear drive for the cams to prevent catastrophic engine failure plus rear suspension upgrades to prevent death wobble but all in all both fantastic bikes and highly enjoyable to ride👍💯💯

[@1lowfr0]

I have both bikes (1990 Fxrt and 2005 fxdxi) You def feel more planted and in the pocket on the FXR. Also something to mention is the FXR wheelbase is 2” longer.

[@nlftw666]

You take that evo and freshen it up with a good cam and head work and it’ll walk that twin cam. And those that’ll say it’s “modified” are correct however it’s still less CI than the twin cam. Honestly chain conversion, engine refresh, suspension upgrade, and brake upgrade it’ll be a no brainer. I’ve owned quite a few bikes and none of them even come close to the fxr I own. It’s definitely my forever bike.

[@williamgenese4496]

Yup... 100%. Exactly what I did to my 89. Cam, high compression, head work, suspension and brakes. Lost count of how many 96" and even 103's I've eaten up.

[@AlmadenJeff]

Without a doubt the FXR. HD cut the hours to manufacture a FXR frame and came up with the Dyna (with some tradeoffs).

[@alancontreras1362]

It’s was Union welders, they have a sticker on the frame by the vin. The basically ran the same frame on touring till 09 but its not union workers doing the work anymore.

[@nlftw666]

The engine also had to be pre assembled before installing. Couldn’t install the heads and rocker boxes while bottom end was in the frame. It came down to being a cheaper build for Harley switching to the dyna platform. And let’s not forget, when the fxr was being built and sold it was their furthest thing from popular. All the hell yeh brothers said it looked to much like a “jap bike” that’s why a lot of the bikes you’d find from that era, guys were putting wide glide or touring front ends on them, chopping and raking the frames, anything they could do to make them look like a “Harley”. The look is what everyone craved. If they had just ridden the bike like it was intended to be ridden they would’ve realized all their cosmetic “upgrades” were destroying the best Harley ever built.

[@chrisboston5629]

​@@nlftw666 Every mechanic I knew rode an FXR back then. Ride thousands of Harleys and it's a no brainer. Saw lots of stupid mods made them ride terrible. Hamsters slammed them. But we made em go fast.

[@johndowney3600]

I just left the comment and I read it over. It's an 87FXR state police bike. Major conversion

[@scottmurphy1567]

I bought a 2005 fxdc new. I have had it ever since. I like the front rake, easy turning with 39mm tubes. I haven’t upgraded the engine but I have replaced the chain tensioners and rebuilt the forks, larger springs and heavier oil. The weight is a plus for me, easy to control at 650lbs. I paid $13,500. Thanks for the video

[@THRASHIN]

Stoked! Thanks for watching!

[@jakedaniels7546]

Definitely want to add an FXR to the stable one day but the one bike I'm never getting rid of is my 01 FXDXT - was lucky enough to get mine from a homie with motor work, suspension already done, super clean and have been able to change a few things to make it mine.

[@PaulSanguinetti]

I myself own both, a 2004 Dyna and the very last year 2000 FXR4, my Dyna is efi not carb so I can’t compare it with my carb FXR. However the late model FXR has the same dual piston brakes found on the Dyna as well as the same 39mm forks. The Dyna is definitely quicker but the FXR has a more planted feeling , by far the frame makes all the difference in the world . I think a better comparison would be your 2001 Dyna and my 2000 FXR4, perhaps we can make that happen sometime. If I could only have one, hands down the FXR4.

[@IndraRS678]

I did a major upgrade for my ‘00 dx and just amazing man. Still looking to add fxr for my collection

[@paulrudolph2310]

I have an 02 FXDX and a 92 FXR-SP. Love them both!

[@dalepash3629]

Just bought a 2000 FXDX for a winter project. Definitely will be watching and rewatching your blogs using your suggestions and products. I was fortunate to meet 2 Lane Life at Boars Nest just before you guys arrived. Wish I would have stuck around. Thanks for all you do!

[@THRASHIN]

Stoked! Thanks for the love and good luck with the project! You're going to love the bike

[@brianspratt4917]

Love the video…I am as old school as my 1999 Fxwdg. First year of the twin cam. I have upgraded the motor to 95 ci with screaming eagle high compression heads. And swapped the stock carb for a Mikuni 42 mm flat slide. Love the power and throttle response. I think it’s rad the younger generation like you, is into the old skool scooters. Stay cool !

[@Thatguywithswords]

just got a 03 Dyna Super glide and its rad man. its sounds so good and rides so smooth couldn't be happier!

[@ntdfmaverick]

The original paint job on that FXR is sick, I'd protect that and take it easy on it, as best you can!

[@THRASHIN]

Jake does! It's his baby

[@donaldcurtis9229]

I do the same to mind carefully like a baby

[@Theoriginalwildchild93]

Saving up for an FXR.

[@akabigbro]

That was great. I have a 2005 FXD that I picked up for a steal. I have been searching for a good comparison of the FXR vs FXD and this one really made it simple. Thank you.

[@THRASHIN]

Glad you liked it!

[@Drewser4959]

I got my Pops old 2002 FXDL that he kept as his Garage Queen, only has 857 miles on her to this date.

[@locoocho2415]

Dude that was a great comparison 👍

[@sqidpro2986]

FXR iconic in Harley Davidson universe that frame design follows right through to the modern touring models- 1983 Shovelhead FXR

[@FFL-vg9ro]

2001 was back when there was a 9-month waiting list after putting your $1000 nonrefundable deposit down. Prices were stupid, and any bike that made it to the showroom floor had an extra, $2k, or $3k, or $4k added onto MSRP.

[@flat6fever680]

I thought that was more of a mid to late 90's thing. I was into them then when they were stupid money and hard to get. I didn't know that was still going on in the early 2000's. It's insane how cheap Harley's are now. I just bought a beautiful blue anniversary edition 2003 Super Glide in mint condition for $3,500. Back in the 90's this would have been impossible.

[@petetownsend7142]

I picked up a last year first gen. '05 FXDI last summer for SUPER CHEAP as a project/flipper bike. It needed a ton of TLC just like you guys said. Turns out its no longer a flipper, its a keeper! In with my stable with a Roadglide, Night Train, and Evo Sportster Hooligan bike. I've never had the privledge of owning or riding an FXR.

[@thedeserttrek23]

I just got a 06 Dyna Super glide. First Harley I've owned and i love it! The twin cam 88 has awesome power, but definitely going to do some engine work to it down the road. Cant wait to put some Thrashin parts on it too!

[@JohnSmith-de2mz]

I like the Dyna, mines an 03 95in. I like the TwinCam engine and the relatively short stroke 4in. My 95in is almost a square motor and is snappy

[@Calvinmob681]

The 03 is a good year. I'd way rather have the old 00-05 Dyna's.

[@jeremyaspen5610]

4 inch stroke on an 88 with a 95 kit was probably the best combo for a hot rod harley for sure!

[@alancontreras1362]

Bought a salvage 03 RK with a 95 stroker and SE 6 speed got lucky. Feel better of the line then my 2016 103 with cams

[@JohnSmith-de2mz]

@@jeremyaspen5610 Yep, I have Joe Mondello Heads, Dark Horse crank with H beam rods and Timken bearings, Wood ,590 gear drive cams, it hauls

[@mick_1976]

96

[@kingrock6128]

I have a 07 dyna street bob with ton of upgrades and i love it.i prefer dyna platform for other platforms because is to reliable and easy to custom. In the same time is fast bike and then easy a touring bike. This year I made a 3500km trip with my wife around Europe

[@MB-qe6kh]

I owned an '03 FXD that I converted to a dual disc front end with works springs and works 13.5" shocks( basically turned it to an fxdx) it definitely was a more nimble aggressive handling bike compared to my '14 fxdl. I also owned an '09 road king and in my personal opinion it out handled both my dynas and you say more in the bike than on it like you do with the dynas. I've ridden my dad's 1985 FXRS with single disc 35mm narrow glide and it felt like my road king just with way worse braking lol. Don't get me wrong dynas are great bikes but you gotta do a lot to make them handle like the FXR or road king (that has been put on a little bit of a diet

[@skootr924]

Have a '06 Streetbob and LOVE IT. And we've been on all roads you've been on. Keep up the good work and rubber side down 🙃

[@CoreyGrey]

Would love to see a 2017 street bob vs 2021 street bob next!

[@THRASHIN]

Noted!

[@johneli1911]

I think most of us born during the early 90s will gravitate more towards the FXR/Dyna. I own a Dyna myself, would love to ride an FXR if I have to chance to get one. Great comparison video overall!!

[@hybridEP3]

I went from a fxr to a 01 fxdx. I want to sell the dx and get another fxr. 😂

[@johneli1911]

​@hybridEP3 it was that easy for ya'll to get an fxr there. Ngl getting an old harley back in my place is a challenge on itself, especially an fxr.

[@hybridEP3]

@@johneli1911 Wym

[@johneli1911]

​@hybridEP3 what I meant is that if it's easy to get fxr where I'm from I would've done the same.

[@hybridEP3]

@@johneli1911 ahh gotcha. They’re awesome bikes they need a lot of money into them imo. Mine was built from the ground up with a s&s v117”.

[@caferacer3539]

If I had a choice I'd prefer a FXR, put a modern front brakes on it, suspension and so on.

[@nlftw666]

I have a 94 FXR that I did an inverted front end with dual disk radial brakes, I did an S&S v111” engine, Brock’s swing arm with a rear radial caliper taller suspension. Bike is like a heavier sport bike now. Absolutely rips, and goes wherever you point it. One of the best handling bikes I’ve ever ridden( not just because it’s mine)

[@gunyoda2356]

I love my 16' Dyna Streetbob!! I'll never sell it ! It was the first brand new thing I have ever bought. I also have a 83' Ironhead Sportster XLS but my Dyna is my favorite by far.

[@berealz9701]

😂😂😂 I've tried everything to get rid of my dyna wobble....fxr motor mounts, engine stabilizers, upgraded suspension front and back... short of swapping out for an aluminum swing arm and inverted forks, I'm out of options. My FXR is totally money though..... don't have a single complaint

[@k9m42]

And I never experienced dyna wobble on my 2009 fxdf at any speed.

[@Dyna-mite154]

Great comparison. I actually went from a ‘19 street bob back to a ‘16 fxdls for that “Harley” feeling. The new bikes are great, but they certainly miss a little bit of soul. I’m guessing this is the same for the FXR. The Dyna seems like a good middle ground between the FXR and New softails.

[@kashanimous1711]

I did that too man! People called me crazy but the new M8s are absolutely missing the soul.

[@anchorsaweigh9893]

I graduated HS in 1997 and just old enough to remember FXRs being fairly new. I think my buddy grab a FXR Lowrider for ~$12k in Temple, Texas. They were pretty awesome bikes back then. I didn’t get my own Harley until 2002 I picked up an FXDL in Annapolis for $15.6k. That was a chunk of change for E-4 in the Navy. I still have that bike. (Took it from an 88ci to a 95ci gear drive in 2008) Yeah I’ve gotten the Dyna wobble but yeah keeping up on your mounts and fork brace kind of ended that. I definitely want to pick up an Early 90s FXR Lowrider though. Nice Vid guys 🤙🏽

[@martinkeet8373]

Got a ratty 99 wide glide stage 2...2 into one VH pipe, Mikuni..... Gotta love it, best bike ever.... 😎

[@nbowling10trio]

One thing you could've added was power potential. Not likely that either would stay stock long. For big power on Evo you need to save up 4k for ultima swap. Twin cam can do 97 inch big bore kit for half the money. Kinda like to see a 3 way comparison with a 1200 roadster. Or even a $5 Sportster with few grand in upgrades. Suspension and 1250 kit. Just for sheets and giggles

[@chrisboston5629]

Got my '90 FXR SuperGlide for 10k in '89. Started wrenching at a dealer in '90. Rode lots of FXRs and FXDs. With same shocks/forks FXD sits higher and center of gravity is higher, they feel much heavier to me. XLs got lower in the turns but nobody wanted to ride one all day. 35 years same bike, 95hp, better brakes, suspension, trans. FXR for me.

[@brianyoung8478]

I had two FXRs and one Dyna. I would go with the FXR , that’s why I kept one of FXRs and got rid of the Dyna. On the FXR I was riding in the bike , as one with it. But on the Dyna I was sitting on it, not to my liking

[@dynaordie8083]

Good points boys. Carbs all day long!

[@leorobles9885]

Both bikes can be purposely build for any type of riding. A Mild street commuter to a go fast hot rod. FXR’s handle the best. No argument there. But to take your FXR and make it reliable. Take lots of money and lots of very good parts. Technology has definitely changed a lot for Harley’s. Not just electronics, but suspension , brakes, wheel size, etc… considering what we are doing now to our bikes. If you fitted both bikes with high end suspension, bigger brakes, bigger motors, who would come out on top? The legend continues…..🤘🏽🤘🏽🤘🏽🤘🏽.

[@brookcampbell2940]

Both bikes are great to own. A quad cam EVO with upgrade to 1250 or 1275 with .567+ cams will smoke both of these, but everyone is afraid to ride a “girls bike”. Parrallel push rods are always more conducive to make more power then criss-cross push tubes.

[@marvin-the-martian5194]

MSRP for a 1992 fxr superglide was $9500.

[@TBontheGP]

I got my first bike in June 2021 a ‘98 dyna wide glide and I love it. I just got a ‘93 FXLR this past September and what a difference in bikes!! Both are stock 80ci motors but the FXLR handles incredibly better, no dyna wobble no nothing and it almost seems way faster than my FXDWG

[@tbobmann229]

FXR is a superior build and lighter btw..100hp is easy out of an 80" evo and will definitely corner better ..FXR's are close to 100lb lighter and the stiffness of the frame is unmatched..

[@zacnicolai8125]

I just picked up a 2001 FXDX with 9700mi, I'm stoked and can't wait to rip it.

[@THRASHIN]

You're gonna love it!

[@stlchuckhd]

Great vlog! I've never had a Dyna so your commentary was enlightening. I love my 94 FXR Super Glide: is my first bike bought in 2004 (didn't know much about Harleys. Just wanted an entry level bike bigger than a Sportster to tour). Added FXRT engine guard, FXRT trunk, and saddlebags from Buckle & Belts in Yucaipa when I lived in Riverside. Changed out the handlebars from original buck horns and replaced seat with Mustang two-up one piece. 86K on frame and tranny; 14K on H-D long-block stock 80" rebuild. Very different feel compared to my 07 FLTR with 196K original drivetrain miles and 14 FLSTC with 26K original drivetrain miles. Love what you guys do! Tacos!!

[@last_waav]

Just bought a 1997 FXD for a daily. Love it, but I will say, I was actually looking for an FXR haha

[@THRASHIN]

Maybe one day you'll have both!

[@TroyShaw-d9z]

Love the fur and dyna. I have a 04 fdli I’ve put 13 inch shocks in the back I put your 9 1/2 inch risers mid bend bars the bike is awesome like the V-twin he rips

[@Mr6thborough516]

I'd take a FXR over a Dyna any day of the week! The FXR has a better frame design

[@theodavies8754]

I had a '95 Evo FXDL, now have a '99 TC88 FXDL. Wouldn't go back. EBC HH front pads make twin disc work with one finger mostly. EBC FA200HH don't work in the rear but they are still selling them. Harley pads for 91-99 have no bite, sure the discs don't wear out but that's no good if it doesn't stop. Stock cams in the 88 are tame, no issues with the spring tensioners here but I change the oil and check the shoes as recommended. Wheel bearings need to be in spec for the roller type and need to warm up to handle well.

[@Calvinmob681]

I'll take the FXDX over the FXR. I've had them both, and on trips, I've had all my FXR's have issues, and I've had all my Tsports 01 and 02 take me across the country multiple times. Being in a club it's important to have something reliable. I love my FXR like I love my 69 Camaro, it will never go out of style.

[@THRASHIN]

Well said!

[@ScottRichardson-hh6pt]

FXR 100% bought a new 1994 FXLRC from local dealer for 13,400.00 best bike of the 5 bikes I've ever owned. I have 2 softails and a CVO street glide and a 2000 Big boar FXR

[@THRASHIN]

Right on! There is the MSRP we were looking for!!!

[@AppleJack76]

Then my dad stole his '92 FXLR (used in '93, one owner) for $8000, with only 3000 miles. It resides in my garage now. RIP dad.

[@IronPonyShow]

This is fantastic fellas! Makes me wanna buy an FXR! My current bike is carburated so I know exactly what you mean about having more soul.

[@leadingedge626]

I went from race bikes to a 05 Dyna this year. I tought it was going to be a boring slow ride and I would kiss my corners goodbye but I love the cornering and torque or my Dyna (I have a 95ci and 258 cam) but it's good good sound, good handling and power. I think I may pick up an FXR just to have for the look and to play around with so I have an older carb model. Great video guy as usual.

[@duck539]

Love My 01 FXDX BLK ... Have all your cool parts ,, But the best add on was the Sputhe Staibilizer kit with new motor mounts . Harley hard to find . Big Bear works Great !! Good Times !!

[@GorillaCookies]

I currently own a 91 FXRS- SP with 56,xxx trouble free miles. Ive cammed it , S&S Super E carb and it has a vance & Hines exhaust. Handles fantastic . Definitely quicker and faster than stock. But its still not fast or quick by any real measure in my opinion. I also have a 06 Dyna Low Rider. It has 14,091 miles right now ( just looked ) it has cams , power commander, Thunder Header. Faster than stock as well as faster than the FXR. The low rider is more comfortable and a better bike on a long ride. FXR is funner in the curves. The Dyna feels a lot heavier. Both are great bikes in my opinion

[@alanquintus2069]

Love my 86 FXR

[@GMCJay_lly]

I'm looking at one now to buy. But previous owner put softail tank and different wider forks on it.

[@feloniousmonk3049]

Time for a Sportster 1200 collection, Lance. Maybe a Custom and a T touring model.

[@mikesutterfield5901]

The FXR frame required the engine to be assembled in the frame which was costly since the engines weren't made in the same factory as the bikes were assembled. That's why is was "costly" and eventually discontinued. It is a superior handling frame.

[@Ryan.C.Wright]

I’ve got an 2003 super glide wish it was an FXDX but it was a lot better deal for my first bike, but I love the carburetor Dyna

[@THRASHIN]

Totally agree!

[@mike-fb1pu]

Still riding my Dyna Super Glide 02 fxd I bought new in 2002. Running a Mikuni carbs and I bought it stage 1 kit love the bike. Also want to get 2022 electric glide stand 107

[@johntracy2861]

I have to say that being a guy that was born and raised in South Dakota, Rapid City area to be exact, I have never owned an Harley. Been a brand X guy my hole 53 year life. After watching your blogs and other video's, I think I am jumping on the FXR or Dyna train! Just need to sell a 2006 Honda VTX1300 to help finance the endeavor! Did see a 1989 FXRS for sale in lower Alabama recently for $4,800 but missed out on the deal!

[@THRASHIN]

Right on! Shoot us a pic once you grab one. We'd love to see it!

[@bradleyyounger8499]

I prefer the evo over twin cam. If you go twin cam dyna go for a 99-02. Better bearings and crankshaft. Change the cam chain tensioner to gear drive

[@johntracy2861]

@@bradleyyounger8499 Thanks for the Advice!

[@williamgenese4496]

If you ever ridden both for a decent amount of miles well... FXR all day. Frame design on the FXR just handles better. It's a stiffer frame. Makes all the difference.

[@tattooglisha]

Im for FXR. EVO too! I like bigger stroke it gives you bigger torque. I ride a Sporster xl1200s 1998 it has alot of upgrades. But FXR would be my choice.

[@canadianloon6433]

FXR all the way regardless of reliability The ride and sound is HARLEY'S best bike ever made

[@1Bigduff]

I will always pick my 2004 FXDL over my 2023 street bob all day long. the bob is for my commute, just slogging miles in traffic in the greater DC area. the dyna is more comfortable and just IMO way cooler than the softail. Never rode an FXR. maybe some day.

[@Eiclipxs]

I have a ‘94 Custom Yaffe FXR and it is a beauty, funnest bike I’ve rode

[@AlmadenJeff]

The stock TC in the FXDX is nearly a square engine whereas the Evo has an extra .5" stroke with a smaller bore. That should influence what you feel, and it seems to come out a bit in your talk on comparing the rides.

[@thakery5720]

If the FXR has a hot rod engine fitted along with decent engine mounts it'll maybe be in contention but as my 2010 Dyna (with Chopper Hauss mounts) has a reworked 113" CVO topend along with everything else done, it's 130+ bhp and torque is in a different world to a 40 year old bike !

[@scottdog3304]

Like... how many times can you guys say like, the word "like" in like, 20 minutes? Both those bikes would need a fair amount of upgrades to improve on performance and dependability. That being said, my choice would be the FXR all day long.

[@rolandohenriquez3036]

get both! have a dyna and i love it...

[@darrinwestphal4250]

Well, my 93 fxr was owned by my father now I have it....I believe when he purchased it in Colorado Springs it was around $10,900 give or take....plus tax....

[@THRASHIN]

Stoked you still have it!

[@kashanimous1711]

2:57 I have a really hard time believing the dry weight on an FXDX is 661lbs. Weirdly enough, I've found multiple spec sheets that claim 619lbs as dry weight, and equally as many that claim 661. For reference, a 2017 Dyna Lowrider S has a 664 pound dry weight according to the spec sheet. All I know is that my FXDX feels and handles like a 400 pound bike and that's all that matters to me. On a side note, I've had both bikes, and in my opinion, you can't beat an 04-05 dyna with fuel injection. The FXR I had was cool, but they are absolutely a labor of love. I rode mine 3 times and it catastrophically broke down on me twice. My 2004 has been very solid however. If you're interested in an FXR, just get one that's been restored and you'll have a really nice handling bike.

[@ironheadsally]

FXR all day! I would have liked to see a comparison in which the bikes have the same engine. Get a tc swap FXR versus that dyna, or an evo dyna vs evo fxr. Apples and oranges.

[@tex9280]

I personally got the last of the Dyna the "17 FXDB Dyna 103 Streetbob 🖤🧡🖤 I'm a TwinCam Man💪🖤🧡🖤💪 May all your days be Harley days🖤🧡🖤 Safe travels 🙏♥️🐾🐾🇦🇺

[@leward]

This debate has been getting pretty heated as of late 😅

[@elzer0181]

Love my 2003 Dyna FXDL - first thing I done when I bought it was replace the engine mounts and have just bought a Performance machine calliper to upgrading the stopping power- even with the Arlenn ness big rotor kit (single disc) I am not happy with the brakes..

[@berndbeimdick7244]

Upgraded my 2003 FXDL to dual disc and am happy with it. Back then Harley offered a kit including disc, caliper, sleeve and even break lever assembly. I don't know if it is still available. Part no was 44090-00A

[@colonialking7470]

I bought a stock 92 fxrs in 92 brand new for 10800.00 .I still have it, was lost in flood fire harley dealership in 97 but bought back from insurance and customized it.Tried keeping parts original but most everything was unavailable. Last year for fxr manufacturing was 94 then limited edition ones 99, 00, any leftover fxr inventory went into those limited bikes harley made.

[@dannails1473]

I just picked up a 1993 FXR. I rode a 2001 FXD Dyna Super glide for years previously. To me there's just something about experience on my FXR that I can't describe. Is it better? That's definitely going to be subjective. It my FXR better for me? Absolutely!!!

[@THRASHIN]

Can't go wrong with an FXR!

[@paulfiore7083]

FXD models have the Timkin main bearing from 99-02. After that they went with pressed crank and main bearing. Forget using gear drive after 02

[@Michael-bw5uy]

I ride 1999 fxdx Branch heads s&s mild grind cam mikuni 42 supertramp 2 to 1 great ride grab a handful and nothing but smiles

[@paulfiore7083]

I bought an 01 FXDX with 4,900 miles for 6K in 2015. Mikuni, K&N, Supertrapp 2:1, SE cam chest & high flow oil pump, inner cam bearings, S&S .510 cams, S&S gear drive with Jagg oil cooler

[@THRASHIN]

Stoked!

[@wesleydeitrich2915]

A little work on the fxr and it would crush that dyna, little enhancements to an Evo make a bigger difference than little enhancements on a dyna. Plus evo's get way better fuel mileage than twin cams