Harley-Davidson Road Glide Wheel Upgrade (Rinehart Racing)

Harley-Davidson Road Glide wheel upgrade! We installed some new carbon fiber wheels on my 2024 Harley-Davidson Road Glide! Big thanks to J&P Cycles for the collaboration! ➡️ j-and-p-cycles...
This is episode No. 6 in our build off series for @harleydavidson It's Blockhead vs @kruesioriginals We're building a 2024 Road Glide vs Kruesi's 2024 Street Glide.
Wheels: j-and-p-cycles...
Tires: j-and-p-cycles...
❱❱ We're GIVING AWAY a Harley-Davidson! Sign up @ www.BlockheadG...
❱ Book Service @ www.BlockheadGa...
❱ Join our Discord @ www.BlockheadM...
❱ Become a Channel Member @ bit.ly/BHM-YT-...
Don't forget to Subscribe! ❱ www.bit.ly/BHM-Sub
Channel Sponsors!
❱ Ruroc: ruroc.pxf.io/B...
❱ Law Tigers: bit.ly/BHMxLawT...
❱ Rokform: bit.ly/BHMxRok...
❱ Cardo: amzn.to/3qEl3id
Thanks for tuning in! Ride safe, stay vigilant!
▬▬▬▬
❱ GEAR I USE:
Helmet | Ruroc: ruroc.pxf.io/B...
How We Talk to Each Other | Cardo: amzn.to/3qEl3id
My Gloves: bit.ly/BHM-RevI...
Phone Mount | Rokform (Discount: BlockheadMoto25): bit.ly/BHMxRok...
❱ LINKS:
Instagram - / blockheadmoto
Facebook - / blockheadmoto
Merch - www.BlockheadMo...
▬▬▬▬
Business Inquiries:
Email- [e-mail]
❱ MAIL:
Blockhead Moto, 276 Springview Commerce Dr, Debary, FL 32713

[@BlockheadMoto]

Aside from horsepower, carbon fiber wheels enhance the performance of acceleration, gives your bike better braking, and better handling! Follow up video going over those soon! (be sure you're subscribed, huzzah)

[@joakimragnarsson685]

No bike difference in power on dyno with the carbon wheels. But I could like to see the time it takes to accelerate, think with the lower mass it is a faster movement, there for faster. Are you with me??

[@2WheelsSometimes1]

Thanks Chris for swapping out the wheels and dynoing the same day. Something that power charts don't show, that some dynos can show, is acceleration in time. Is your dyno able to do that? Because many people don't know that you end up accelerating and decelerating quicker than stock, and it changes handling a lot. I do trackdays, and have a set of carbon rims, the difference is quite a lot. Especially on track. However, I do have to change my riding style for both the track and the street, the bikes handling is that much different. You actually need to readjust your suspension and chassis. It must change a cruisers handling dramatically.

[@notorious285films9]

I miss block unboxing stuff in his garage with swords and axes 😂😂

[@BlockheadMoto]

That's funny, I JUST had to rearrange that 'box opener' wall and it felt ridiculous trying to find a new place for a samurai sword, medieval axe, foam sword and more 😂 we're definitely bringing it back, lol

[@allanespiritu3]

Finally some build off content, wasn’t sure if you guys were still competing 😅 so excited for this and I hope it’s not the last and is something that’s going to happen with more of the channels. Bring back the 2000s build offs! 👏🏽

[@BlockheadMoto]

01 Engine Removal: kzbin.info/www/bejne/nniwdK17m5Jkfc0si=qO8LG5DPzC05uh1N 02 Engine Install: kzbin.info/www/bejne/aYvNZamoirKCbdEsi=hJ5LFiCBSL1G61D8 03 First Ride on 135ci M8: kzbin.info/www/bejne/f5DVl2dqbc9_qaMsi=mL8BXnwJ_VlUuOHd 04 Testing SE Tuner: kzbin.info/www/bejne/j6PXan9ji9prqMUsi=tRsE6vy8A1P8ioA5 05 Exhaust Install: kzbin.info/www/bejne/bWnVnaGZqdSercUsi=mnCYOxcLG52BHupP 06 CF Wheel Install: kzbin.info/www/bejne/Z5DFkp-amdisl7Msi=LmW2GmhfHDE3vln8

[@BlockheadMoto]

We've made plenty of build off content 😁 Definitely not the last!

[@fringeparnell9272]

Carbon wheels don’t have enough rotational energy to make a perceptible impact but what they will do is change how they affect centrifugal forces and how icy force it takes to change direction. No one in the Streetbike Performance world change to them for a power increase. It’s all about handling. And An Ali Dymag wheel is the same weight or lighter than a Carbon. Kinda surprised you even brought up the more horsepower suggestion but, hey it proved the point. ✌️

[@MichaelBertini]

I loved the intro! 😂 Those carbon wheels are so 🔥

[@BlockheadMoto]

Thanks Bertini! lol

[@zambla5088]

I'd be curious to know if the ride is stiffer and how it handles potholes.

[@tewgomoo]

Been watching for about 2 years now, love the hrsprs science videos! Keep up the great work and hope there's not too much of a cleanup from the storm! Beat that poser from AZ! You gonna make anything for twin cam bikes? Exhaust etc?

[@Pwpapa.7]

You can tell Chris is an artist by the way he holds that paint brush😅😂🤣🤣🤣🤣

[@jonkalm]

I was just in Kissimmee, Florida on a Make-A-Wish Disney trip for my daughter. I had planned on taking some time to run over to your shop to grab a t-shirt yesterday but we got evacuated Tuesday and our trip got cut short. Make-A-Wish said they will reschedule our trip at some point so hopefully I still have a chance to stop by at some point !! Hope all you guys made it through Milton unharmed !!!

[@BlockheadMoto]

Sorry to hear that! Glad they're able to reschedule the trip, stop by anytime!

[@thevtwinwanderer]

I live right across the street from there. I volunteered and worked there in high school. I've witnessed how hard it can be. If you ever need to borrow my bike to go on a ride to clear your head, feel free to let me know.

[@jonkalm]

@@thevtwinwanderer I appreciate that

[@troy_neilson]

I hope all of the Blockhead team are safe and well after the storms.

[@BlockheadMoto]

We're all good here, thank you! 🙏🏼

[@StoichioJoe]

Beautiful Video! Great job the content and creation! Hope all is well and safe there

[@BlockheadMoto]

Thank you!

[@sethg8501]

Curious about reusing the rubber cush instead of replacing with the Alloy Arts polyurethane cush drive. Why did you not switch that out while it was apart?

[@Dawgvet98]

Awesome video and great info. You guys are the bomb for good info. I’m looking at these wheels for my CVO ST, were y’all able to get the TPMS to work with these wheels?

[@seiz0r]

Good luck with the swing arm...

[@Richp21]

What about the time it take to go from idle to red line any difference between the stock and bst wheels ,i have 2 bikes one with one without those wheels ferls like the bike with carbon wheel revs quicker !!!

[@FreewheelerLover]

Hope all goes well for the wedding tomorrow.

[@canttalk]

Does yalls softail exhaust fit an wide tire softail? I have a 2019 breakout m8 114

[@justbeingbrown]

What’s better, belt driven or chain driven?

[@matthewescobedo3535]

As an auto tech, I feel for Chris having do some extra work. Hope y’all stay safe during the storm

[@tgkelly5828]

Looking good! Any plans to bring carbon fiber parts to the softail line?

[@thevtwinwanderer]

Chris getting married after a Hurricane? He's so cool

[@rxman4453]

I need that shirt Block. " Stay Strapped and Get Clapped" I luv it.

[@JKFireEMS]

Nine line apparel

[@brandonmacon3317]

That shirt has been available for years son 😅

[@markmcintosh7095]

It would be nice to weigh the complete build compared to the stock bike. Fun channel thanks.

[@Ridingfish]

This is a sick video!! 💪

[@BlockheadMoto]

Thanks Fish!

[@molckbradley]

In terms of horsepower science, I'm curious doesn't the dyno record time the pull takes for the programed RPM sweep? as far as the different wheels/weight differences, could you push😊 16:16 the rotational mass aspect to a point of same horsepower but "getting there quicker" asking this from more of a drag racing standpoint, I also watch a lot of drag racing and every part of their speed is about weight balance and suspension. Also praying for everyone affected by the hurricane!

[@Starship007]

Lighter weight helps everything handling, braking, and acceleration. Braking would be interesting to measure the difference.

[@kiefmaster9337]

Are you all going to make exhausts for like the Iron 883's?

[@AEO429]

I’d be curious to see an acceleration time say from 60 to 90 I feel like that would be a better performance metric. Just listing to the pulls it seems as though the carbon fiber wheels went through the rev range faster than the stock wheels. It could have just been the edit in the video but definitely seemed faster, and more consistent in the sound.

[@BlockheadMoto]

We'll have to put that to the test!

[@AEO429]

@@BlockheadMoto the more I think about it the more it makes sense that the numbers didn’t change. Because you have done nothing to add power you just subtracted weight. You also may have to play with the ranges in which you time. Maybe 60-90 isn’t where the time gap is, maybe it’s 30-60 or maybe you can see it from 20-100. You guys are smart individuals, I’m sure you will definitely find where the benefits are if any are present. Btw I’m happy to see a response on any comment here. I’m glad you are all safe!

[@tracykerkove9265]

Word on the street is Kruesi is secretly installing a Fllux Capacitor on his build,how do you top that Mr BlockHead?

[@BlockheadMoto]

We supply the plutonium, so he’s got nothing to power it. We also control the lightning, being from Florida and all, the lightning capital of the world ⚡️ Your move, Kruesi

[@TheMatthewZuliani]

I'm in the pan handle and every hurricane everyone here panics from PTSD due to hurricane Michael in 18.

[@pauly680]

Love the half baked reference lol

[@rongibson679]

I hope you guys came through the storm safely

[@BlockheadMoto]

We're all good here, thank you!

[@ramezy04]

Does tha Blockhead fender fits on the 23’s ???? I’d love to throw it on my ST!.

[@BlockheadMoto]

I don't believe so, H-D did redesign the rear fender for the new 24's. We haven't tested on a 23' and earlier model yet though. We might have to try this out in the shop soon!

[@sk8xaq]

"Cabron Fibre" I love it.

[@brandonmacon3317]

Like the Bike from Thrashin that has carbon wheels.

[@ejdtm]

Isn’t there a way that the dyno can measure how quickly it accelerates not just the power?

[@sethzelenik1605]

I would be curious to know if the carbon Wheels require additional maintenance and if you can expect the same dependability out of them. I was told by somebody that you have to have them x-rayed or ultrasound every 3000 miles to inspect for cracks. that may be total BS lol

[@BlockheadMoto]

Geez, x'ray or ultrasound every 3k sounds ridiculous. I'm gonna have to get medical insurance for my wheels now, lol

[@tewgomoo]

​@@BlockheadMotoroflmao comprehensive may cover that... But that's funny...

[@sethzelenik1605]

@@BlockheadMoto sounded a bit ridiculous to me also. But would be curious your opinion on structural integrity and dependability vs your standard aluminum wheels.

[@WEPACVO]

In the name of Science!💪🏼😎🤘🏼

[@BlockheadMoto]

Hrspr science! 👩🏼‍🔬🐎

[@brookcampbell2940]

I hope you know how to install tires on them. No m/c in fL will touch CF wheels.

[@OnyxCVO]

It is going to be a heck of a battle. Ryan is building a freaking monster. Have to support the locals. GO #kruesioriginals

[@BlockheadMoto]

Def building a monster, but we're not worried. Stay tuned 😏

[@TOM-yu6vc]

I have a question about the saddleman seat you have for sale on your website. What year sportster does it fit?

[@BlockheadMoto]

I believe it's for 2009 - 2023.

[@TOM-yu6vc]

@@BlockheadMoto thank you

[@Starship007]

Engine mods very expensive vs suspension mods. Buy the horsepower from the factory. Buy different mufflers as exhaust too quite nowadays. Then spend money on suspension and cosmetic mods which are more economical.

[@harrynelson9203]

Ain’t they like 10k for the pair 🤣 seen carbon wheels on ebay for 5k each wheel, i think it was the exact same brand too, their blue wheels look absolutely amazinggg 🤤👌🏻🔥

[@BlockheadMoto]

They're a bit costly, links in description 😅 I loved the red, they look cool in pics!

[@harrynelson9203]

@@BlockheadMoto cheers mate, sorry if i exposed you to the tax man 🤣🤣🤣🤣🇬🇧🇬🇧🇬🇧🇬🇧

[@dcrichmond6828]

😂😂block was so funny this video

[@BlockheadMoto]

Danks 😅

[@rosscurrant8940]

Every 7lb saved will feel like 1hp. Dyno for time will measure the gains because of less reciprocated mass, or a drag strip of course. Been done to death tbh. Wheels look good and the acceleration will definitely be measurable

[@BlockheadMoto]

We'll definitely have to take it to the drag!

[@michaelrodgers6559]

It's basically the same effect of a lightweight flywheel, and also a couple extra things. Less weight means acceleration and braking performance improve. It also means that the suspension can more easily keep the tires in contact with the road. I'd imagine there's less effort through the handlebars for corner transitions. More power, though? Nope. Just better use of the power it had already.

[@BlockheadMoto]

Well said!

[@CaptainBroadSword]

Hey, just a quick question which companies should I go for if I'm looking for good alloy wheels for Indian Super Scout?

[@BlockheadMoto]

Installed tires on them in the video 👍🏼

[@CaptainBroadSword]

Out of stock😢​@@BlockheadMoto

[@UnforgivenRiderNz]

I would have thought that a lighter wheel might of warped under acceleration when warm

[@hdsquadrides3370]

Will you guys have handle bars? carbon fiber that is.?

[@BlockheadMoto]

We have a few other parts in the manufacturing queue but that's definitely one of them we're working towards!

[@bradlewis8036]

The extra weight could be both, a pro and a con. I see it that way because the more weight is requiring more muscle to get the wheels turning. However the pro could be that once the wheels are turning less restrictive force when turning is applied to the vehicle. Which helps carry the vehicle through the turn. Those are my opinions.

[@bradlewis8036]

And application to climbing hills also. I see it as more weight gives more, it is a tiny amount. But more kinetic energy towards helping the motorcycle climb hills. And kinetic energy is energy in a certain direction.

[@bradlewis8036]

It depends on where the bike is being ridden. You know the road make up. What’s the area more so known for. Lots of hills, more turning, more stop and go, and all of the affecting different conditions of travel. My thoughts.

[@BlockheadMoto]

Makes sense, thanks for sharing your thoughts, Brad!

[@thunderglide]

Did you put the TPS back on wheels? when you buy from Brocks they say TPS don't fit because of the hole diameter. Also can you take the Rinehart letter off? For that kind of money shouldn't have that crap on.

[@BlockheadMoto]

Yes TPS were installed, they seemed to fit with no issue. Can't take the RInehart lettering off, it's under the clear / epoxy.

[@chip9832]

Stock rotor bolts!?!!??

[@babybudistmonk]

The Red Cross is the last place you want to donate to. Look for local charities or organizations in the area to donate to. They are the ones doing all the work.

[@RichieAvallone]

I hope you guys are alright afterwards. 15:22

[@BlockheadMoto]

We're good here in Central FL, some damage but nothing major, thankfully

[@joegoshen8992]

Maybe the carbon wheels will feel like it has more power vs the actual dyno numbers

[@justSkitBra]

Carbon wheels will make it handle smoother

[@BlockheadMoto]

Eager to put them through a test ride!

[@justprentice]

HP Gain = Total Weight Reduction / Weight per Horsepower 💯

[@redlinered]

$6000 = used Dyna 🖖

[@АлексейСмирнов-п3ж2д]

⚽️

[@J2ROOSTER]

Rotating mass is just another excuse to argue!

[@BlockheadMoto]

Might as well put it to the test! haha

[@CryptoJaxHax]

They look sick, but alot of upkeep and butt dyno not gonna notice. Unless you're trying to shave every single Oz off you possibly can, you're more likely better off going on a diet for weight reduction it is not only better for your health and also make better acceleration lol.

[@BlockheadMoto]

Diet for weight reduction and health is always the best mod, just a much more difficult one, lol

[@CryptoJaxHax]

@@BlockheadMoto for sure, motorcycles have the opposite effect of dieting.. They take you to too many delicious calories and occupy all the time I should be at the gym haha.

[@RadDadisRad]

The bots are crazy.

[@BlockheadMoto]

Legit! KZbin seems to clean them up afterwards but they're getting crazy for sure

[@gregmannos]

Love those wheels ! Anybody need a barely used kidney ?

[@RadDadisRad]

I like carbon wheels but not for street use.

[@BlockheadMoto]

We'll see how they hold up!

[@FI702JAY]

In our pro mod world every 10 pounds is only one horse

[@BlockheadMoto]

Good info!

[@MudFlap62]

What’s up with the bike give away ?

[@joshkuk8279]

Rip Bob Ross

[@OnyxCVO]

HAHAHAHAH Cabron Fiber Wheels, that is EPIC HAHAHAHAHAHHA

[@BlockheadMoto]

¡Gracias! lol

[@OnyxCVO]

@@BlockheadMoto emailed Amanda. I want to buy Cabron Fiber from your website. I was just wondering if any discount codes available? Buying windshield. Lids and rear fender. Thank you JB.

[@freddieRODZ]

Cabron fiber 😂😂😂 1:45

[@BlockheadMoto]

¡Órale!

[@Grof2000]

man don't put chain , it is worst thing I did on my bike , always nasty and dirty , stretches a lot , have to adjust it and change every 5-6k miles... you know that already.....

[@BlockheadMoto]

Yeah, having had sport bikes, I'm not a fan of chains or chain maintenance. But with the power that we'll be putting on this bike by the time we're done with it, it'll more than likely need to be chain.

[@JKFireEMS]

Stay safe boys. Hope everyone's good. Chris, best of luck with wedding planning. If it can't happen I hope the Venue does you right.

[@BlockheadMoto]

The wedding is on! T-minus 9 hours

[@LJSiar]

Hoe yall are ok, God Bless.

[@BlockheadMoto]

All good here, thank you!

[@groundzero.]

Should not use wd40 to install tires! Its not good for the tire or the Carbon Fiber.

[@BlockheadMoto]

It’s silicone spray, not traditional WD40

[@CryptoJaxHax]

First

[@BlockheadMoto]

🥇

[@ToobSteak69]

69th

[@BlockheadMoto]

🏅

[@Avankaurparmar]

Shit block!! I hope you, Chris , Justin, and all your friends and family are ok!!! Be safe. We all have seen what Helene did, and it's terrible!! Hope your guys are ok!! Great job helping out the red cross man u got a big heart!!

[@BlockheadMoto]

We're all good, thank you!

[@bchase1980]

Every video is just a long sales ad now... hard to watch the channel any longer.

[@BlockheadMoto]

Curious how the video is a long sales ad. Sure, we've got sponsors helping us to build the bike, and we thank them, but we're putting something to the test (lighter wheels = more power) and showing from unboxing to install to dyno. Is that not insightful?