Harley exhaust on amazon. Option for Touring Bikes. (The GOOD, BAD, AND UGLY)

[@FullThrottleHOG]

kzbin.info/door/YDs7iM2cqyV9GDIHqAcrDA

[@tex9280]

Give it a respray with BBQ spray paint.... As it works well with the heat

[@775summit]

When was a kid in my twenties I really wanted the loudest stuff ever now I'm in my 40s and I think SE is just perfect a little bit of grunt but not too loud. Thanks for the vid

[@nbt3663]

I'm 57 and I feel lights are better to get noticed than sound. I've lost 40% of my hearing due to illness and quite frankly stereos and headers are just not on my list for my bike. Mind you, I still have a custom dyna that has half-radius pipes on it. For a 96 ci engine it's loud as snot.

[@louisgiardina8918]

I agree same here I’m 61 and the SE look and sound perfect I have a 2019road glide ultra and do a decent amount of touring so I don’t want anything that’s to loud .

[@RoadieWingZZ]

You get what you pay for. SE sound is better rumble by far.

[@wingandhog]

I installed Sharkroads on my Electra Glide three years ago. They sound exactly like my Reinhardt Racings I had on my Fatboy. Except I paid $185 for the Sharks

[@FullThrottleHOG]

Nice! I really like the sound and you just can’t beat the price. Ride safe. 🤙🏻

[@frankhabib5748]

Been running Cobra NH on last two SGS. One set of chrome on 2017 and one set of Black on 2020. Both sound great and fit and finish outstanding. Plus great sound at idle and on highway.

[@High_Desert_Tanner]

I just ordered one of the last Magnaflow slip on exhausts out the. They were on clearance for $450 for 4.5" mufflers (normally like $800 a pair). Magnaflow quit making bike exhausts and will no longer be available after these are gone and they are absolutely the best sounding touring slip on mufflers out there to my ears. Deep and growling with no raspy tinniness. Also a little on the more subdued side for volume, which I want. I'm not into loud just for the sake of being loud. These sound more like a built big block or something... And I love it.

[@SixShooter14]

Oh, in regards to the fading. You might consider taking the mufflers or just the tips to a local powder coater and have them blasted and re-coated to match the HD heat shields. You might get them resprayed for $50 or so.

[@thedakotahurley]

Love love love these pipes. I had a set on my Street Glide Standard (chrome) and had absolutely no issues with them. They sound fantastic. Last week I picked up a new RGS with black finish. The bike came with RCX Components slip-ons (with the slash cut ends, which actually look awesome), and despite that I ordered another set of these Sharkroad "no baffle inside" pipes the same day. They arrive Friday and I'm like a kid waiting on Christmas. Lol. The RCX sound pretty good, just not as loud as I want. So I'll probably sell them, or keep em around in case I decide I want quieter again. I do love the downward slash ends of the RCX... I wish the Sharkroads had exchangeable tips.

[@RydinginStyle72]

When they are new just take the baffle out and spray paint the inside of it with engine paint for $5. Then take the insulation off the battle and wrap it with metal tape. Then rewrapped insulation and put the baffle back in. Then it won't rust for a couple years.

[@SixShooter14]

Probably not the best example, I have Rinehart True Duals on my 1997 Road King. I love the sound, of course it's 25 years old, 80ish cubic inches, carb'd, with a bolt-in cam and 10:1 compression. On the Amazon saving money side of things. I bought a pair of extended 2014+ saddlebags for $250. Pre-painted with the new style lids, latches, and hinges already assembled. I didn't know if I could even make them fit on my bike. So I sure wasn't spending $1k at AdvanBlack just to prototype it. In the end, a couple trips to the hardware store and a few hours of bending new brackets is all it took. Now I have a '97 bagger with the new latch/hinge design and a nice extended bag look. The paint is not bad, no chips, no cracks. The material is kinda thin and flexy, but not enough that I feel it's flimsy. I'm very happy with my results but do caution folks, the cheap Amazon/ebay listings are NOT going to be consistent. It's a bit of a gamble.

[@redbikemike1]

I just picked up a 1995 Road King with a mikuni carb. I am looking to get a little more top end highway speed out of it. Was wondering what bolt in cam you went with?

[@dcdell2008]

Cobra Neighbor Haters is what I got for 2021 RGS, best bang for the buck, quality made that does not brake the bank accounts...thanks for sharing

[@FullThrottleHOG]

I do like the sound of the NH. Thanks for watching.

[@easyglider1307]

I am running the Shark Road 4 inch chrome slip ons on my 2021 Road Glide. They sound just as good, if not better than my buddy's Rinehardt slip ons on his 20 Road Glide. I will say that the chrome on the shark road mufflers is definitely not show quality, but for $225 that I paid, they are well worth it. I may change exhausts once I go to Stage 1 , so let's see.

[@kman-mi7su]

I agree with that assessment. I'm running 4.5 inch Shark Road megaphones on a Yamaha Royal Star tour deluxe. They sound awesome with plenty of throaty loudness. For the money, they are a bargain. I've had them on the bike for 2 years.

[@RoadieWingZZ]

Running SE Street Cannons on my ‘19 Road Glide Ultra with Stage II. A friend recently bought some Shark Road 4’s for his ‘18 Ultra Limited Low. Shark Roads are definitely louder, but the SE’s make a much beefier low rumble. Fit and finish is definitely better on the SE cans and tips too. I’d definitely spend the money on the SE’s again as it’s clear you get what you pay for with exhaust systems.

[@frankhabib5748]

Cobra NH. Have ridden 30,000 miles. Paid about $350. Great fit and finish. Sound terrific. Had a set in chrome and a set in black.

[@FullThrottleHOG]

I agree, Cobra’s sound great! 🤙🏻

[@hammarashi]

I installed Thunderheader slip-ons and the sound was great especially on a stock bike. After going to a Stage 2, the sound was much louder. When traveling long distance, the loud pipes are not always desired.

[@VONVELLImusic]

YeaI agree sometimes too much noise early in the a.m like 4 a.m can feel weird. But safer in backroads for deer . But you don’t need it that loud at that time for humans. Any one near you will know your there lol

[@NYCZ31]

This was exactly my thought when I went to Rinehart slip-ons. MUCH louder, sound great, but when riding all day, even with earplugs on, it was just too much. Now I'm looking for an option midway in volume between stocks and rineharts

[@ericnay7733]

I actually had a set of rineharts on my 16 street glide. They were to quiet with the baffles in and to loud with them out. I found Mutazu megaphones (pretty much the same as sharkroad) and it put me right where I wanted to be.

[@jerrygaona6162]

Yes I have owned the Shark Road version ( I believe they are the same just cost more for the Mutazu badge) And yes I loved the sound of the Megaphones. Nice and deep bass sound, just right for me.

[@haroldwiser2641]

I put Shark Road mufflers (chrome) on my '16 Ultra Classic in Florida on Christmas day. So far I love them but time will tell. Bought them direct for $139 bucks too! Rineharts were $700 at the time.

[@2Tall03XX]

They holding up pretty good still?

[@holisecleveland2859]

Full Throttle HOG, I used to work on tug boats in south Louisiana. We worked in fresh, brackish and salt water so we had to deal with rust. Any time that we saw even a little rust we would wipe it with a dry cloth the use a paint brush to brush on a green liquid by the name of Chem Prime. Let it dry to a white haze, wipe that off with a dry cloth, coat again, let that dry, wipe it off then paint the area. That spot would not rust again. If you have a hardware store in the area the caters to tug boats and/or carries marine paints they should carry Chem Prime or a product like it.

[@FullThrottleHOG]

Thanks for the info Holise. I’ll do some research on that. I appreciate ya! 🤙🏻

[@nickanders6126]

Just ordered the chrome set. Coming before Christmas! Thanks for the vid! Stay safe brother.

[@FullThrottleHOG]

Hopefully you enjoy the sound as much as I do. Ride safe. 🤙🏻

[@btsadventures4310]

$200 down the drain I bet 😅

[@robertmendoza1050]

How did the chrome finish come out ?

[@ErnieT777]

Love my Sharkroads! I bought mine straight from Sharkroad. Better price. Like yours, both mine have faded about 2 inches where they slip on. Great sound!

[@FullThrottleHOG]

Agreed. I think they sound great and would probably make a dent in the market if it had a better quality finish.

[@davehenrikson5459]

I had Magnaflow Rockstar on my 2015 RGS. Damn I loved that exhaust sound but my friends that would ride with me always wanted me to the right side of the group. If I was on the left side and towards the front everyone got to "enjoy" it.

[@infini1970]

One was completely black because you have that V twin set up where only one pipe is getting exhaust. It's not a true 2-1 so you don't get a true 2-1 performance. I put on a $200 kit that makes it a true 2-2 and it's louder, more full and both pipes are putting out exhaust. Both sides get black inside. Also the bike performs more consistent now.

[@araneaetvelivolum1086]

Really great comparison, thanks a lot for making the effort. I am not sure I'd go for that Amazon exhaust. I have V&H headers with Rineharts 4" on my bike since 4 years now (25k miles) and the pipes are still looking great w/o rust or bluing. The stage II tune was great and the bike runs great. I think that the longer I have the system on my bike, the better it sounds. Having said that if money is tight, that Amazon exhaust is certainly an option from a sound and looks point of view. Durability on the other hand seems to point to a higher priced name brand. Ride safe 🤙

[@wingandhog]

I had a set of Rineharts on another bike. They are killer pipes. No doubt about it, but I also have the Sharks on my Electra Glide which is Stage 1 and 2. After three years, I have not noticed any cosmetic or performance deficiencies. After hearing my pipes, my bro in law took the cobras off his Road King and switched to the Sharks. And he’s way more pickier than me

[@icebrakernh]

Might not hurt to spray them with a engine paint to seal that in before installing

[@bmacias]

Im running the Bassani DNT on my 2021 RGS and love the look and sound. I had CFR's on a 2015 SGS and tried to get those but they are always on backorder. Every 6 months they would say 6 months more so I went with Bassani and love them.

[@FullThrottleHOG]

I’ve not heard the Bassani DNT’s. I’ll have to give them a listen. 🤙🏻

[@rhodyriderz]

I have had them on my 19 RG for 2 years and they have been Fantastic For The price you pay you can’t go wrong 👍👍🇺🇸🇺🇸🤙🤙🏍🏍

[@Peter-ho8zs]

It’s crazy, all of the shark road sound clips sound amazing, idk why anybody wouldn’t try them, find a cerakote facility and have them sprayed for a few hundred dollars and you’ll have a better finish than almost any pipe and still only have about $500 in it.

[@h.d.mech.mortenson2098]

Bro ! Thanks for the video ! I was stirring over spending 800+ on just slip ons and those sound good ! I already broke the bank buying a Lowrider ST fast Johnny edition and it’s ridiculous that it sounds like a sewing machine . Now I have to upgrade of course. Appreciate the info. Ride safe.

[@patrickburgin5767]

2020 Tri Glide with Stage 2 and CFR slip ons. Best sound ever!

[@bradwilliams4921]

I get plenty of volume out of my Fatboy which has Vance & Hines on it. If I could afford a Touring bike I would be satisfied with the low rumble of the SE slip ons.

[@FullThrottleHOG]

The SE is not a bad system. That’s what makes riding so great. You get to customize the bike for you. Ride safe. 🤙🏻

[@bcbsilverhawk8426]

Nice video. I installed these on my 2020 Road King Special. I did like the sound. My issue with them was a noticeable dip in torque. I replaced them with TAB 4.5 Zombies with Z-Rings and Torque cones. Hits the spot for me. Recently installed Fuel Moto jackpot header. Haven't ridden with it yet. Winter project here in Colorado. Can't wait to give it a test run. Soon I hope. Take care.

[@jerrygaona6162]

You could have just put the torque cones on with the Shark Roads if you liked the sound. But if you liked the TAB Zombies better then all the better. I do like the sound of the TAB Zombies

[@williambalyx1053]

when riding 4-5-6-7-800 miles a day, the screaming eagles are loud enough for me. I did take the cat out when I put in the stage 2

[@AlmostMrsAnderson]

Love the difference in sound!

[@garyd4419]

Good video. I have factory head pipes, mainly because it's a new bike and still in warranty.( 2021) I put Khrome Werks slip on mufflers on it and ya they are pricey at $700 but now I can hear my bike run. I think it has a decent tone, Noise level is at 89db and mellow, not a harsh crack to it. I'm sure it's going to be louder when I do the head pipes because the cats will be gone. I tend to shy away from the Amazon stuff but they can have good deals at times.

[@kenruples2373]

I’m running fuel moto 2/1/2 jackpot head pipe with Vance and Hines monster rounds Love the sound

[@kennethcalimpong7919]

Great Vlog, just ordered these, one day I will save up for a top full exhaust system. Thank you for making this, Aloha from Hawaii. Kenneth 🤙🏽

[@tjrunlimited]

I put shark road slipons on my 2020 road king. I was very happy with the sound. Now, less than two years later, the left end cap has pitted on the inside bottom. It’s corrosion, it’s visible, and it looks real bad. I keep my RK looking good, but this can’t be washed away. I’ve written to shark road hoping they will step up, but from what I read on their website, this kind of corrosion is not covered. I guess it’s true, that you get what you pay for.

[@FullThrottleHOG]

Good to know, thanks for sharing. 🤙🏻

[@Steve-hk5qv]

Great video, thanks. I’m wondering if the chrome version also has the rust and fading issue

[@momgmail1]

I’m running Vance and Hines twin slash slip ons on my 09 dyna fat-bob and I love them only down side to them is the ones I have are chrome so trying to keep it clean is sometimes annoying

[@bartholomewpetrakos6104]

Just bought a 2022 RG special off the lot , Harley WONT tune yet so it just made sense to me to save a buck until I can get full exhaust system and tune 👍🏼 great vid

[@FullThrottleHOG]

Thanks for watching.

[@bartholomewpetrakos6104]

@@FullThrottleHOG put them in last night , wasn’t crazy of the finish , ran down grabbed some high temp paint sprayed prior 👍🏼

[@Luckky-13]

@@bartholomewpetrakos6104 how is the exhaust pipes holding up after you painted?

[@rodmartin1258]

I bought a set for my 2018 Streetglide special. Sounded great. I had the same problems with the finish on the pipes, but something went wrong with the insides of the the pipes it smelled like something burning all the time. I had my Harley dealership look at them and they said the lining was braking down. I put a set of CFR’s on and love these slip on’s. I wish I wouldn’t have wasted my money on the cheaper slip on’s.

[@jdhaas4231]

I have the exact same mufflers on my 2018 CVO Roadglide. They came on the bike pre-purchase. I have the exact same issues. I personally think it makes my bike sound like a tractor. I dont like them that well and am looking for something else. Mine sound the best at startup and when you shift and high RPM. I'm thinking Krome Werks sound about what I'm after. Or S&S MK45s.

[@danlaunius7913]

I just ordered these. Based on your review, I'm going to wipe these down with alcohol and then re-spray with a good quality header paint.

[@scottryan492]

I have the SE street cannons and love the deep tone but could use a little more volume. I was considering these slip-on mufflers but decided to try something first. I removed the cat from my headpipes and that made a big difference. Louder but still deep tone. I love it and get many compliments from other riders. Another trick I might try is wrapping the baffles with aluminum tape and repacking them. I could just take out the packing but don't want to lose the deep tone. Great video bud!

[@FullThrottleHOG]

Not a bad idea. I might try something like this in the future. Thanks for the input Scott. 🤙🏻

[@cjg431]

Did you lose any performance removing the cat? Also I thought the baffles were not removable for the se on the m8?

[@scottryan492]

@@cjg431 I didn't lose any performance. If anything I gained. My bike runs better and cooler with cat removed. I'm not sure about the m8. Mine is a twin cam 103ho. I did have my bike tuned on the dyno just because they are way lean from factory.

[@cjg431]

@@scottryan492 ya the m8 se the baffles are welded in. Saw a video where the guy used a hole saw to get them out. But the decat and putting a better slip on on should do good.

[@scottryan492]

@@cjg431 I agree 100%

[@MrBobbyConstantine]

Great video man, very honest and informative.

[@iahogrider1618]

Running Rhinehart slip-on’s on the ‘97 Electra Glide and TAB medium baffle slip-on’s on the ‘19 Street Glide…gotta say the TAB’s are my favorite! Great vid Ryan! 🤙🏻

[@FullThrottleHOG]

I’ve not heard the TAB system yet. I’ll have to check it out. 🤙🏻

[@blg020]

Yeah tab mufflers sound great but cost$700-$800. The shark roads are $210-$260. Big price difference.

[@h3r63rt]

I have the same sharkroad pipes in chrome. No rust problem.

[@vf12497439]

My screaming eagle black mufflers are rusting, and that faded look on the right side is from the heat of the catalytic converter. My screaming eagle muffler is also fading or turning white in the same area. I just installed a cat less Tab 2-1-2 header to get rid of that heat. My bike became louder just with that….. now I’m thinking I need louder slip ons?😈

[@packrat1204]

I’m running sharkroad megaphones chrome on my 2019 ultra limited. I have almost 20.000 on them there still like brand new an still sound as good as the day I put them on .worth the money as far as I’m concerned. I think I paid 160.00$

[@2wheel-therapy]

I bought a used set of SVT Boneshakers from a friend for my 18' Road King. Haven't installed them yet but they are from an 11' Street Glide so I had to get an adapter for the bigger side and I'll see if I can get it installed on the bike.

[@joelglidewell6467]

Have the SE exhaust you started out with. Yes, they are a little quiet. After 8k miles and stage 2/3 upgrade, sounds and rides MUCH better.

[@FullThrottleHOG]

Nice Joel. The SE system is a good system and with those upgrades I’m sure it sounds awesome. 🤙🏻

[@fililoboesparza5784]

Sounds good👍🏻 I recently purchased a use 2018 ultra limited in July. The previous owner installed TBR Slip On’s I love the sound. The bike still has original header exhaust so it still has a cat. Maybe in the future I’m going to change header pipe with no cat when I go with a wide band oxygen sensors. But Maybe I’ll keep the cat cause I am loving that low rumble sound on highways. Thanks for making Harley video keep them coming.. 🤘🏻😎

[@JoeBro37]

So, I run these slip-ones on my 21 Road Glide. I’m thrilled with them. I haven’t had any finish issues at all, however mine are chrome and about twice a month I clean em with Eagle One’s Never Dull. I have seen other people have that same discoloration at the connection point (in chrome) and it turns out their clamp that is supposed to seal the joint was worn out. Idk if you replaced yours when you installed them or not, but that could be it.

[@FullThrottleHOG]

Interesting. Thanks for the info Joe! I’ll look into it. 🤙🏻

[@sandramoon5545]

Been looking for a slip-on. Thank you for sharing! I’ll definitely check it out and consider it.

[@socalgolf9978]

I can deal with some discoloration or rust for the price , I’ve seen expensive mufflers in poor condition also

[@michaelroy925]

Great sound for the money, not sure how long the finish will hold up. Also,you probably lost some power. Especially with no baffles. Nice video comparison 😎👍

[@FullThrottleHOG]

Yeah I agree on the power loss. I have since jumped into the Rinehart product which is fantastic.

[@MrFameone206]

I traded in my 19 RGS for a 22 RG limited I want to build this over time unlike my other road glides (the limited is my 3rd rg) I'm not in a hurry to to upgrades to this one but I need more sound from my pipes I'm probably going this way for pipes for now. Good video man the good and bads

[@RidingintheOzarks]

I went for performance, I have Rush headers with no cat and Rush big Louie slip on‘s.

[@capecodbiker9902]

I run 4.5 chrome werks. And I love them worth the 900 and there. Good baffle. Choices. From hurt your ears to mellow😁

[@FullThrottleHOG]

Awesome! To be honest, I’ve not heard the Chrome Werks system…that I know of. It’s good to hear they have options. 🤙🏻

[@capecodbiker9902]

I got some sound clips on my channel. Not best mic 🎤

[@spiritmediumdaniel7161]

which screamin eagles were quiet? i want quiet

[@Liveharley1]

They sound good, its a cheap way to upgrade your pipes when the money is tight, I just bought a road king 2022 26K and $3000 in changes so I can get rid of the stock pipes on the cheap till I have money for a full upgrade. I will get the chrome ones for now.

[@FullThrottleHOG]

Thank you! I appreciate you watching. 🤙🏻

[@maxxbenzz7842]

Those Sharkroad pipes sound like a 69 RR Hemi. Lolo. Love the sound

[@kpnomad7]

I am using them as my 2 into 1 with no cat header, I did install a dk custom torque cone to add pressure for cure flat spot at 2500 rpm!

[@kpnomad7]

Chrome did burn out when I had a cat, just painted a portion with heat paint! Oh well!

[@rakkasanveteran1619]

You just helped me make my decision, great video!

[@FullThrottleHOG]

Happy this helped.

[@vickdog100]

hello great video. when you install slip ons from Amazon is it recommended to also install a tuner?

[@CactusJack252]

I had shark roads on my sportster. I experienced the same you did. It sounded great but looked like shit after a year. Cold starts were extremely loud. I bought them to be temporarily though so I didn't care.

[@harryhowell5644]

I had some RCs 4.5 in chrome. They stayed looking good for years. Expensive though, like 600+. The fitment was ok, but the finish was brilliant. Guess you get what you pay for sometime. Just got my stock pipes on my new roadglide. They look pretty good.

[@nathanielphillippi2242]

I had those too, they were just too quiet for me.

[@graymorales3149]

Mine started fading and hand waxed them and helps hold up the shine again

[@70DMac]

Wonder how the chrome finish would hold up. Rust and fading is a huge deal breaker for me, especially living in the North east where we have salt in the roads during the colder months. I clean my bike religiously but if it's a cheap finish the elements will eventually get to it. My last bike has V&H twin slash cuts and zero issues with the finish. May be worth trying, have to do more research on the chrome ones

[@Hoglife]

I love the sound of SharkRoad slip ons

[@jeffdriggs2895]

Put the Sharks on my 2021 Road King Special, 2000 miles, still look great, there is a slight discoloring tho. Love the sound, just the right decibels!😂. I’d definitely buy again, paid $210. I’m in Commifornia , very hard to get any slip ons!

[@SinisterClutch]

I have Cobra True Duals and they sound great! Over 40k miles on them and still holding up. Those slip-ons sound good to me and the price is pretty cheap. Not sure I could deal with the fading. I got my exhaust used at half price. So I saved money that way. Great video brother 🤙👊

[@FullThrottleHOG]

Yeah, the fading and the finish is a bit frustrating but the price says it all. Cobras are a great sounding system. I tried finding some Rineharts used…no luck. Lol. 🤙🏻

[@silverfoxstacker1588]

Been running sharkroad megaphones for about 3 years now ( not much riding last year) and I like the sound however I’ve had to rewrap them on average twice a summer. I’ve tried everything and now trying steelwool. Cheap price. Nice sound. Wish ida paid more for better set

[@rebelscout423]

rewrap?

[@Chilllybob]

What handlebars do you have on your bike and what size.. those are the exact ones I want. Thank you in advance and thank you for the video

[@FullThrottleHOG]

They are the 14” Yaffe Ape Hangers.

[@CamsVlogplus]

Just buy a can of engine black paint should clear up the issue “!, thanks for the video very informative

[@nathanielphillippi2242]

Have the chrome ones with a after market header on mine. They’re obnoxious then lol

[@FullThrottleHOG]

Lol, I bet!

[@advveteran4894]

That sounds amazing! I think my neighbors would kill me first thing in the morning though haha!

[@hd_av_traveler1495]

great video as always, i have tab performance slip on for my bike

[@jimrichter9237]

I have a v&h 2-1 in black and finish didn't hold up well on $600 + pipes. Take it for what it's worth, I don't think the black will ever hold up. Went back to chrome for that reason.

[@brookebrawley2142]

What height are the bars You're running? Looks great 👍

[@FullThrottleHOG]

14 inch ape’s by Paul Yaffe.

[@brookebrawley2142]

Just curious how tall are you, as that looks like the perfect height. I'm getting an 04 that has the 16inch meat hooks and am hoping that they have my arms straight across at 6'2 Thanks for the response brother 💪

[@andypugh7654]

To late now but when you order them before you install them ceramic coat them. No fade.

[@OZARKSHDRIDERS]

The SharkRoad exhaust definitely sound's better and louder than the Screaming Eagle exhaust, I have been running Rineharts on the last 3 bike's that I have owned, I just like the deep sound that comes from them, but it would be nice if I could have gotten a set for $260 buck's lol, awesome video brother💯👊🏽😎

[@FullThrottleHOG]

I do love the Rinehart sound, I just couldn’t justify the new price tag because of back orders. 🤷🏼‍♂️. Thanks for watching. 🤙🏻

[@OZARKSHDRIDERS]

@@FullThrottleHOG I know what you mean brother💯

[@bobmohr4952]

I just bought some of these for $160 for my 2014 Road King. Got them because the Rineharts that came on my bike rattle like crazy, I’ve taken the baffles out and bought new baffles no help, driving me crazy. I had Vance and Hines double slash on my last bike and loved them, no problems. But I’m not going to continue to pay a$600- $800 and more for slip on exhaust from big name manufacturers. That said I’m going to try these cheap Chinese made exhaust and I’ll let you know my verdict.

[@OZARKSHDRIDERS]

@@bobmohr4952 keep in touch and let me know what you think of them.... I'm curious

[@stevejordan1196]

I have the ones with no baffles in them and they sound awesome

[@cjg431]

Any performance gain or loss from the shark rods ?

[@jimcyrus3070]

I have an 06 Road King Classic, only owner, and all stock. Now that I have gotten older and more financially secure, I'm looking for a set of slip ons. Was going to go with Cobra NH, but then I heard the sharkroad 4.5 and saw the price and am now considering trying them instead. Any thoughts?

[@gilbertmal6033]

I have almost the same kind of pipes from Amazon in Chrome and sound like yours.👍👍

[@angelvillarreal3800]

Question Bro, when you did this video did you hand the Air Cleaner and Tuner installed? Or have you just been riding with the Slip Ons?

[@FullThrottleHOG]

Tuner and air cleaner, stage 2. Screamin Eagle tuner

[@scott_0492]

I have Shorkroads and love them! those tips are aluminum, you sure that's rust on there??

[@garrysceppa7508]

Rinehart pipes came with my road glide special and I’m a noob so I really don’t know better but give me a few months and I’ll tell you .

[@Bass.Player]

Paint them with high heat paint or have them power coated...

[@michaelwheatley1813]

my chrome set has 40k+ on them finish is still nice

[@robertjefferson5915]

Awesome and great advice thanks a lot

[@santospina8486]

I run Rinehart,s 4.5 I love them .

[@paulwaldrop]

I have a 2017 Road glide with a stage1 screaming eagle exhaust. Did you have to change out the headers to use the sharkroad system? Or did they fit ok?

[@juanfgonzalez2039]

Was the loudest slip-on pipes do they make 🤔

[@ThrottleDownunder]

Sounds awesome mate

[@israelcampos996]

I have rayn harts on my 2018 street glide n I feel like they are not loud at all

[@Trucker_Will]

Did you try taking baffles out of screaming eagle?

[@FullThrottleHOG]

No, I didn’t mess with the baffles.

[@lindseywilson9429]

GreAt video. Thanks for sharing.

[@richardrenaud8053]

I bought a set of Cobra neighbor hatters and they sound great. Less than $400.

[@FullThrottleHOG]

Ive heard good things.

[@shanefuson4782]

I run Rinehart headers with bagger nation mufflers