Harley Ultra Classic Makeover #10 Disassembling Front Forks Cleaning & Prep for Paint | Techn' Moto

Harley Ultra Classic Makeover #10 Disassembling Front Forks Cleaning & Prep for Paint
Today I take apart the front forks, clean all parts and prep the lower forks for paint.
Playlist for all Harley Ultra Classic Makeover Videos- • HARLEY DAVIDSON ULTRA ...
Stuff I use:
Progressive Fork Suspension- amzn.to/3LzFxO0
Paint Thinner- amzn.to/3EZvz64
Fork Kit- amzn.to/3LIHAPO
Upper fork bushings- amzn.to/3wdxb8D
Lower fork bushings- www.jpcycles.com/product/200-...
#HarleyDavidsonPaint #TechnMoto #HarleyBlackout #MotorcycleRestoration
---------------------------------------------------------------
Contact Email- [e-mail]
My Equipment Setup-
GoPro Hero 7- amzn.to/2WWb3k9
Sony ECMCS3 Mic- amzn.to/2vcJ7en
Purple Panda Microphone- amzn.to/2SW3fKY
Tascam DR05 Voice Recorder- amzn.to/2HCV1ko
SanDisk Ultra 32GB micro memory card-amzn.to/2J2zYXP
SanDisk Extreme Plus 128GB memory card- amzn.to/2JSS5R4
GoPro Mounting System/Accessories-
LEBE Adjustable Gopro Selfie Stick- amzn.to/2JHNPUx
Toz Extension Arm Mount Set - amzn.to/2ICvG9B
Luxebell Ball Joint Mount - amzn.to/2IBvbfU
SANDMARC Navy Mount - amzn.to/2qenFzX
GoPro Ball Joint Buckle (GoPro Official Mount) - amzn.to/2HfLdfP
GoPro Adhesive Pad Mounts- amzn.to/2GoznyP
Sugru For Mounts- amzn.to/2pUrAS6
Bluetooth Helmet System-
LEXIN LX-B2 Bluetooth Helmet Intercom- amzn.to/2qAfQ7R
Drone Equipment-
DJI Mavic Air 2- amzn.to/3k3sJC2
Drone Cases- amzn.to/3dwinrU
Propellers- amzn.to/2IxlC6U
*Some links are affiliate links. This channel is part of the Amazon Associates Program and if you click on these links and make a purchase know that this channel will receive some payment from Amazon or other affiliates.
*Video Disclaimer
The video(s) brought to you by Techn' Moto are offered to the public for information and entertainment purposes only.
Any and all information perceived from these video(s) through either visual, verbal, or written means, should be considered the sole opinions of the Producers, the Writers and the Actors involved in the making of this video(s).
The Producers, Writers and Actors of these video(s) have used their best efforts in producing these video(s) but neither Producers, Writers nor Actors of these video(s) make any representation or warranties with respect to the accuracy, applicability, fitness, or completeness of the contents of this video. The information contained in these video(s) is strictly for entertainment and informational purposes. Therefore, if you wish to apply concepts or ideas contained in these video(s), you are taking full responsibility for your actions.
Neither the Producers, Writers or Actors, nor the copyright holder or assigned users of these video(s) shall in any event be held liable to any party for any direct, indirect, implied, punitive, special, incidental or other consequential damages arising directly or indirectly from any use of this material, which is provided as is, and without warranties.
As in all cases, viewers should never take any information perceived from these or any other video(s) at face value and should always do their own due diligence on any viewed material to form their own opinions and best judgments. And where applicable, the advice of a competent legal, tax, accounting or other professional should be always sought before taking action of any kind.
The author and publisher do not warrant the performance, effectiveness or applicability of any sites listed or linked to in these video(s). All links are for information purposes only and are not warranted for content, accuracy or any other implied or explicit purpose.
These video(s) are copyrighted by Techn' Moto and is protected under the US Copyright Act of 1976 and all other applicable international, federal, state and local laws, with ALL rights reserved. No part of this may be copied, or changed in any format, sold, or used in any way other than what is outlined within this under any circumstances without express permission from Techn' Moto.

[@TechnMoto]

If my videos are in any way helpful or entertaining please support the channel by SUBSCRIBING, LIKING and SHARING my videos, It's Free. Click on the BELL to be notified of newly posted videos. NEW- Now you can help support the channel on a monthly basis by clicking on the JOIN button above or the Super Thanks button for a one time gift. Thank You and may God bless you and you’re family

[@Moonfleet41]

Great Progress Mike.. the new inserts will make for better handling for sure. !

[@TechnMoto]

Can’t wait to ride this with the new suspension. 👍👍

[@wingandhog]

Very nice Mike! Not only will your bike have a great front suspension, but it will feel like a totally different bike.

[@TechnMoto]

Really needed it. The original stock suspension was worn out. Feels like no suspension at all when going over some road bumps.

[@BlackphoenixEntertainment]

man thats a ton of work. I never realized how much goes into the front forks.

[@TechnMoto]

Actually not too bad but their is a bit to them as you have seen.

[@jefffrayer8238]

Wow, I had no idea about any of this. I'm certain my 1999 Fat Boy, Evo with 25,000 mi. is untouched since new and needs attention. Previous owner of my 2002 Road King w/35,000 had the forks chromed so new parts were probably installed 10-12 yrs ago. He also replaced air shocks with Progressives. Looks like I need to check out my bikes. Thanks so much for the videos restoring your bike. Hope there's a follow-up to this video with ride comparisons. Thanks for a great video.

[@TechnMoto]

Thanks 🙏

[@Snowmonkeypablo]

96 air assist front forks on a heavy flhtc-i with a 230lb solo or a 475 double up.

[@Snowmonkeypablo]

Are they reliable or will I be in for a maintenence nightmare??old thinking of delete ? And how do I re bolt tops for elimination ,kinda need your experience here thanks.

[@TechnMoto]

not familiar with those so I suggest you do a search for more info, good luck

[@Snowmonkeypablo]

I had to beat the left fork out ,I ruined the top threaded cap up and a 1/2 " extension and socket ,my bike has only has lower pinch bolt and top slides into non pinch hole and top cap holds them in ,Cali bike w/only 20k ?? Thanks for Your Great tips.

[@TechnMoto]

wish you the best of luck dealing with this repair.

[@ftby59mikeD]

Bought the same Progressive monotube kit for my '08 R/King, but have yet to install it. I want to get chrome lowers & do it all at once. This will be helpful, thx.😁👍looking forward to the install video!

[@TechnMoto]

On the road king it’s much easier to do but it can be intimidating. Agreed- Best bet is wait for everything then do the job once. You got this

[@geoffozevans4500]

Nice work Mikey, soon be back on the road 😀 👍

[@TechnMoto]

Working on it 😆

[@Darkvisor]

👍

[@TechnMoto]

Thanks 🙏

[@exupakias]

Well done.

[@TechnMoto]

Thanks 🙏

[@HOCKOMOCKMOTOVLOG]

Wow great work on the video! I gues you tube deleted the second half of the comment. I am curious why you went progressive over say Legends or Ohlins? I know there is a price point difference just curious of why that route? Also have you upgraded the rear?

[@TechnMoto]

Lol thanks 🙏 👍

[@TechnMoto]

Hmmm? did I miss this comment? Anyhow to answer that question- The main reason was price. As you may know suspension parts are very expensive. I am trying to stay within budget for this build but I am quickly learning that soon I maybe over budget by a lot. So I have to cut where I can. If I had an unlimited amount of money for this build My choice would have been Legend suspension products. Still working on the rear shocks. I know I want to get rid of the Harley air shocks but not sure what I will bye to replace them. Will know more as this build progresses but money is a major factor here. thanks for the question- good one

[@HOCKOMOCKMOTOVLOG]

@@TechnMoto not sure if you do Facebook. But market place on there is a GOLD MINE! yes you won’t have legends warranty bht you can get a used pair for a good price. Then just pay to ship and have them reworked over so it’s brand new. Money is always the hardest part of a build. I can’t wait to see the outcome as well.

[@dukestelecom]

Where can I buy that rubber piece you put in the vise to hold forks

[@TechnMoto]

Do a search on google

[@wtf0101]

Good video, 👍

[@TechnMoto]

😆 thanks 🙏