Ferrari 458 Wash, Machine Polish & Ceramic Coating - Car Detailing

[@tedlym.3390]

I really enjoyed watching you detail that beautiful red Ferrari. Thank you,

[@grahamjohnstone9983]

Hi my car has got Sam's ceramic snow foam on it will I need to decontamination before I use sonax?

[@youssefosama4466]

Amazing job as always It amazes me that super and exotic cars can contain factory defects.

[@HarpersCarDetailing]

Thanks man👍🏼 They are usually the worst as they come riddled with sanding marks!

[@Mr.Luke.A]

Great work 👍🏼 not a huge Ferrari fan but the 458 is 👌🏼 also I noticed you have a new work vehicle! Any chance of a walk around introduction video?

[@michaelanderson5975]

Great job a car like this deserves a great detail you guys are right on point and very meticulous awesome job keep up the good work 💪😎👍🇺🇲

[@CameronRDavis]

Phenomenal job Harper. You are very inspiring!

[@jeffreyrobert9460]

Nice video Harper. Beautiful car

[@aaronanu886]

Supremely satisfied 😌

[@keithpowell1357]

Nice mate quality as always thanks for the upload

[@rhysplackett2008]

Great job on this looks like a whole new car!

[@P4SDetails]

Nice work on a nicer car. Good job homie.

[@RaphaelLacoste]

Thanks for this video ! don't you fear collecting dirt from the rear diffuser and scratch the car paint while washing with the same mitten ? I have a 458 and always wonder what's the best way to make sure I don't leave any marks on the paint... I usually have another mitten for the wheels and under the car. always learning I guess :)

[@HarpersCarDetailing]

They are quite fiddly to work on with all the intricate areas. I’d carry on with the multiple mitts, it will help keep the risk of marring the finish limited.

[@specialgarage8460]

Exelent job dude!

[@thedetailinghobbyist]

Looked amazing, Nick 👍🏻

[@eamonkelly2792]

Excellent job as always Nick, the ferrari looks like new 👍👍

[@hansjorgkarcher9504]

Great job!! And a nice van you have now 👍

[@kevinb7058]

Great job Harper my man 👍 What a machine 😎

[@FrostyAMG]

Superb detail. Question - Why not use a battery powered leaf blower to move the majority of the water off the car after rinsing? Gets water out of all the tight areas and crevices that a drying towel will not achieve.

[@HarpersCarDetailing]

Thanks 👊🏼 I shall do use a blower or compressed air but I didn’t have either as left them at home 🤦🏽‍♂️ I’ve used them in all my other videos 👌🏼

[@joe.olivet]

Nice work, my man. Banging it out. 👊🏻😎🔨

[@michaelstevens7533]

Grand job as always 🙌 👌

[@sabrina6499]

Amazing! 😍🤌🏻

[@hassanmahmood5823]

No surprise seeing your comment haha

[@sabrina6499]

@@hassanmahmood5823 I’m not quite sure what you mean by that but I do like to support the channels I enjoy watching. That’s how you show support on KZbin channels 🤷🏻‍♀️ by liking the video and leaving a comment 😊

[@HarpersCarDetailing]

Couldn’t agree more. Thank you for the ongoing support Sabrina 🙌🏼

[@hassanmahmood5823]

@@sabrina6499 no I agree I enjoy all his videos too didn’t mean any harm

[@matteodedycker7620]

great video! Which polishmachine and pads do you use for a one-step polish?

[@HarpersCarDetailing]

In this particular case I used Lake Country Orange HDO pad and Sonax Perfect Finish

[@AM4N18]

WOW! That end shot looks amazing, the paint looks like liquid! Do you find it satisfying seeing the end result like that after all the hours you work on the cars? Little request, can we see you return to some of these cars you ceramic coat to clean them? Show us the beading and I'm particularly interested in seeing you do maintenance/rejuvination of them, e.g. seeing a 'dead' panel, spraying iron remover on them (or other if thats not the thing to do) and bringing it back to life. I think that would be really interesting, coupled with your overlaid thought process of how to tackle the problem, as something in addition to the more 'typical' details you usually film!

[@HarpersCarDetailing]

Thanks a lot! Yeah it’s always great seeing the end result! I have a video of a Range Rover I coated a couple of years ago with a rejuvenation detail. Hopefully that will be what you are after 👍🏼 kzbin.info/www/bejne/m2bWZomlp7mkm6M

[@AM4N18]

@@HarpersCarDetailing Oh yeah, I think I did catch that one. I just meant more generally it would be nice to see you revisit some of the cars you did your major details on and instead see you do one of your 'maintenance' details (though I know it depends on the clients). E.g. would be cool to see this 458 again, see how the coating is doing, we get to see you do your thing on a car you've done the bulk of work on previously, perhaps your technique might change on certain things now that it has a coating (?). Just a suggestion as something a little different here and there to your full on correction videos thats all.

[@murph4035]

Great video. Thank you! Please may I ask what Ceramic Coating you used on this Ferrari. The finish was amazing 👌

[@HarpersCarDetailing]

Thanks Murph. I used Carpro Cquatz Uk 👍🏼 It’s all about the prep work behind the coating that makes it look great. The coating does finish it off though 👌🏼

[@murph4035]

@@HarpersCarDetailing That's great thank you !

[@markymoo1980]

Good to see you back fella!

[@tedlym.3390]

Where was he that you need to welcome him back?

[@ilikechickensausages2075]

@@tedlym.3390 If you know, then you know

[@carcarerijen]

yo dude nice detail🤩👍🏻, i started my detailing buisness over a month ago and i have had 3 clients so far. + i make advertising video's and photos to grow and show people what i do. do u have any tips to grow in this world because im having a hard time doing so right now!?

[@sappucinoo]

is that shinemate ex620? how you like it compared to others?

[@HarpersCarDetailing]

It certainly is 👍🏼 I love it. Powerful, less vibrations than its Italian rival and doesn’t stall as much on curves

[@grahamjohnstone9983]

Looking to do my own machine polishing what u use for your 1 step polish as am going to do 2 step and your work as always excellent cheers buf

[@HarpersCarDetailing]

Hi Graham, what car do you have?

[@grahamjohnstone9983]

@@HarpersCarDetailing Ford ecosport in white

[@HarpersCarDetailing]

I would go with the same combo that I used on the Ferrari with the ford having soft/intermediate paint hardness. Sonax Perfect Finish and Lake Coutry HDO orange pad 👍🏼

[@grahamjohnstone9983]

@@HarpersCarDetailing what did u use

[@grahamjohnstone9983]

@@HarpersCarDetailing my car has got Sam's ceramic snow foam do I need to decontamination it before I get sonax on it

[@fluzzerr]

Why do you use a rar remover to remove een sillicone based tire dressing? Are you a fan of sillicone based tire dressings?

[@HarpersCarDetailing]

It was a hand car wash nasty silicone dressing that stains everything. If I used the wheel brush it would put a black oily residue all over it which would transfer to the wheel and make it a pain to clean. You then have to clean your brushes out with a tar remover or solvent. It’s not good for the tyre either

[@fluzzerr]

@@HarpersCarDetailing So you don't recommend using sillicone based tire dressings at all?

[@ilikechickensausages2075]

@@fluzzerr Water based, Silicone will dry out the rubber over time.

[@vahidpasalar4826]

Hi mate witch city you are in

[@HarpersCarDetailing]

In Harrogate, North Yorkshire. 👍🏼

[@vahidpasalar4826]

@@HarpersCarDetailing do you know someone like you in Liverpool please

[@vahidpasalar4826]

@@HarpersCarDetailing how much does it cost for washing range rover sport please

[@HarpersCarDetailing]

I’m not too sure unfortunately. Liverpool would be a little too far to travel