Draughty Window Not Closing Properly! UPVC Hinge Replacement

[@pthrower2846]

at last someone who has prepared a good and sensible video that shows you how to lign up the new hinge against the old one of the window frame. Great job

[@froywhernside]

Just an amateur having a go, thanks for watching 👍

[@NPVG26]

This is so incredibly helpful. I was thinking I'd have to replace my window but it's just the hinge and now thanks to you I know how to replace it! Thank you!

[@froywhernside]

I think a lot of windows get replaced unnecessarily

[@jamsand3]

Best and clearest tutorial I've found for this

[@paulcharleton3208]

Thanks for that I found this exact situation on my daughter's bedroom window after hearing an almighty whistling in the recent high winds. I watched the video to the end and was rather dreading the taking out and ordering the correct hinge - it wouldn't have gone back so easy for me 😂. However after you showed the angled end piece engaging with the plastic recess I checked mine out and noticed it catching in quite a bit before the top hinge. So with nothing to loose I found a small file and got in there to file a bit more of a groove into the plastic and now it's much better - no longer hitting the back of the plastic which was throwing the metal out. I've halved the gap already and will carefully do a bit more tomorrow. So cheers for that - and I was let off the hard bit !

[@JohnBishop-c4e]

Lots of simplified information covered in detail thanks for covering all the detail.

[@froywhernside]

My pleasure!

[@willylang]

One of the best videos I have seen on how to repair a window hinge problem 10/10 😊

[@froywhernside]

Thank you! 👍

[@Aziz-Ahmed-UK]

Excellent job you have done on your own without any help.

[@peterbooth2804]

I have the same problem and noticed it was caused by the problem you mentioned towards the end. Video was well made and encouraged me to follow your method. Thank you for your time, effort and for sharing. It is greatly appreciated.

[@froywhernside]

Thanks for watching!

[@stephenyounger8280]

Thank you for terrific video. I used this to change hinges on window at my son's place today and was invaluable. Thank you

[@froywhernside]

Glad it helped 😁

[@Mindboggle100]

Froy, you have a gift for teaching as well as a lot of skill... Outstanding tutorial, and well filmed on location. I rely on KZbin for so much, yet it can only as good as the content. Thanks, very appreciated tutorial.

[@froywhernside]

Thank you 😁 Appreciate it. I'll keep at it

[@lordfarquaad4763]

Storm Bert has yanked and destroyed my window hinges. And your video came to the rescue. I shall try and fix it once the storm has passed. Thank you.

[@froywhernside]

My wife left the windows open on the same day!!! 🤦🏻

[@NeilsCarsAviationTravel]

Thanks for this, I need to replace my hinges later today and this really helped. One tip I got was to test fir the hinges to the main window frame first and have all the holes pre-pilot drilled, then remove and fit to the window. It makes final fitting easier. Luckily mine is living room window so I will be able to work from the driveway.

[@froywhernside]

Great advice, thanks Pilot holes would definitely help

[@TommyTucker0]

brilliant video, exactly what I was looking for, I was quoted £750 for a very similar window and all it needs is the hinge

[@froywhernside]

Glad it helped

[@cliveagate]

Great tutorial, just what I was looking for 👍

[@leeclements323]

Good job mate, very clear and informative video, really helpful thanks you

[@osainet]

Many thanks Froy!!! This your video just helped me fix my draught window 😂

[@Home_made_ch]

Thanks. Most important information i found at 6:20 of video. My windows had exactly same issue, but instead of black plastic ends i have metal < shape, so this < was pushed away with time and

[@froywhernside]

Great solution 👌

[@davidpeters223]

The hinges you took off are fire rated hinges, (egress hinges)by pressing that metal tab allows the window to open 90 degrees to help people escape if needed. The hinges you replaced them with aren't fire rated hinges so window wont open as wide. Hope this helps.

[@froywhernside]

Very true, should have mentioned that in the video. Options in the description for both 👍

[@billyballsohyes554]

An egress hinge opens to 90 degrees to allow escape in a fire, that metal tab is there so the sash can be slid along for cleaning of the outside pane, it is not there for escape. That is an easy clean egress hinge, you can’t be trying to press a metal tab in the event of a fire.

[@grahamshillingford8229]

Well said, you are quite correct easy clean egress friction stay all in one. I love it when people who try to correct someone get corrected themselves!!​@@billyballsohyes554

[@kingofthetrowel1725]

@@billyballsohyes554interesting this mate as my side hung hinges are ones that when the widow is open 90 degrees the sash is actually in the middle of the frame opening and then you can slide it left or right obvs one side is then fully open (widest) but are they still classed as fire hinges,as you wouldn’t want to be exactly trying to slide the sash in the event of a fire? Surely fire hinges you literally open the window and it opens the full 90 degrees and that is that

[@billyballsohyes554]

@kingofthetrowel1725 you are correct, they are easy clean and they allow you to clean the outside pane from inside the room

[@andrew2272kag]

Always good to know you can do things solo. Really helpful video, thanks. Gonna remove the foam draft excluders and swap the hinges this week.

[@froywhernside]

Nothing like a good old solo struggle

[@FanaticQuattro]

Just found your channel, you've inspired me to give it ago!! Off to Screwfix in the morning! Thanks for a grest video.

[@froywhernside]

Be careful!

[@simoncordoba]

You saved me time and money. Thanks

[@froywhernside]

Thanks 👍🏼

[@Mark-fl1hg]

Thanks, this video is incredibly useful - it's exactly the problem I have with my windows (which look to be the same design). Window companies were very unhelpful, just wanting to replace them, so used draught excluding foam around the edge - also the noise levels are greater due to the gap! Seems the weak point in all these is the plastic to metal arrangement, that pulls the hinge side in. Thanks again, will definitely be having a go at this shortly.

[@froywhernside]

No problem, at least it's a cheap fix, just a bit of a struggle 😁

[@ewanroberts9331]

That was really, really helpful - thought I'd lost the plot for a bit when I pushed the hinges through the wrong way but all good in the end. Cheers

[@froywhernside]

Thanks 👍

[@blizteredthumbs7911]

Thanks for this, i have this exact issue in the garage.

[@froywhernside]

Thanks for watching 👍

[@FudgeMaths]

Thank you for posting - gave us the confidence to change ours a week or so ago. A couple of things we came across which may help others: Definitely better to have two people! Even though the hinges were like for like, I think the original hinge was stretch away from the window towards the frame slightly. This meant we needed the spacers even though the original didn't have them. This meant the things on the frame at the hinge end needed to be shifted away from the top and bottom by a couple of mm We also found the handle didn't close properly. All I did was unscrew the three metal things on the frame at the handle end and put each on back on one at a time. I ended up being just one that needed repositioning.

[@froywhernside]

Thanks for sharing advice 👌

[@alanr585]

You're a hero doing that job single handed!

[@froywhernside]

One wrong move and it would have cost me a few hundred quid so not advisable 😂

[@alexbruce7708]

Great video. Thank you. The irony is that a 2pence piece of plastic end cap is designed to wear out, the replacement still has the same issue, but all that is really needed are new plastic caps, or better still, some metal ones. Great video.

[@froywhernside]

I would like to know which company makes the best quality hinges.

[@jamesmckenzie6949]

Thank you froy, you nailed it,exactly my situation,and you explained the solution clearly,nice one ✓

[@sidr7193]

hi, have the same problem. do you know what them 2pence piece of plastics end caps are called and where i could buy them from. thank you

[@davidrigby9572]

Good little video. I need to do the same hinge replacement myself and that's a nice little walk-through for the process.

[@froywhernside]

Thanks, just don't drop the window 😁

[@nathanmiller9545]

My left side is exactly like that so now i know what the problem is and it’s been bugging me until I seen your video haha thanks

[@froywhernside]

No problem 👍

[@6diorr]

Hello do you have video on changing the rubber seal ?

[@froywhernside]

I do not, all mine seal well. I'd assume you can pull the old ones off and buy new self adhesive seals? Likely easy to cut with a pair of scissors

[@bucklbr4]

Awesome work Froy. Just a couple of things that might be useful. First, on your old hinges there is a 'push' on a metal part. This is to allow you move the whole window sideways for easy cleaning. useful if you still have some of those. Second, on your new hinges, there is an extra hole around the middle of the hinge. this is for 3 rather than 2 screws. It helps support the window better so you might consider sticking another screw in there.

[@froywhernside]

Thanks for the tips 👍

[@nixonsmateruby1]

I put clear silicone around mine in winter and keep the living room windows shut and the difference is amazing.

[@froywhernside]

We have to open our windows daily as we find our house gets quite humid if we don't... Another problem to solve 😁

[@gunnerman9511]

Good stuff, I can confirm this is a proper ball ache job, especially if you live in a tall building with these heavy windows as gravity isn't your friend. 2 people are definitely recommended and even easier if one is outside on a ladder holding it in place while you screw it back in. Putting it back in and lining it all up once you've put the new hinges on is very tricky and your vid made it look easy.

[@froywhernside]

Thanks! It was a struggle!

[@michaelconnor8317]

You could always deglaze it to make it lighter, then reglaze it after you've refitted it. Don't forget to toe and heel the sash when you refit the glass.

[@sidr7193]

hi, thank you for the great video. i have a question and was wondering if you could help? at 6:20 you explain about the hook piece which goes into the black plastic bit. on my window the black plastic bit has worn which is not allowing the window to seal properly. do you know what that black plastic bit is called and where i might be able to buy from? thank you.

[@froywhernside]

I have no idea to be honest. You can probably buy a new hinge and just swap out that piece... Maybe

[@TheRealLindenH]

Good walk-through instructions - we have exactly the same issue with what looks like the same three pane unit - how heavy is the frame/window you did the work on?

[@froywhernside]

Not heavy at all really, just have one person holding the window and the other unscrew the hinge so there's limited risk of dropping it 👍

[@ShaamoneHeeHee]

I meant to say, thanks for doing this video, I've watched a couple of these and between you all it gave me the confidence to replace a hinge this afternoon.

[@froywhernside]

Nice! That's the idea, get more people giving it a go. Thank you 😁

[@edwardpatrick6962]

Very Good Clear and informative

[@froywhernside]

Glad you think so!

[@marztee894]

Good video . If the hinge isn't bent it can be loosened up so it moves with way it is supposed to Then the window will shut properly. Clean around the hinge with a stiff brush and use wd 40 open and shut the window to get it moving properly. This worked for me .

[@froywhernside]

Good advice

[@_OhAbode]

did you try adjusting the seal tightness (on the side of the window pane) before replacing? often its a simple 1/4 turn of the pins and its tight 🙂

[@froywhernside]

No I hadn't, how do you do that?

[@_OhAbode]

@ there’s some gasket pins on the edge of the window sash by the locking mechanism, can just turn them with an Allen key, 1/4 turn at a time clockwise to tighten, anti to loosen, and it brings it closer in the frame 🙂 some windows only have screws, so worth checking filling instructions as they will hopefully tell you which screws to adjust

[@jossmaxwell00]

Thanks so much for this video. Now I know how to sort my drafty window. Cheers 👍👍👍

[@narcoserrasalom6464]

That's the video I was looking for! Thanks buddy! Well done! 🙌

[@froywhernside]

No problem 👍

[@petethebeat48]

I didn’t realise the hinges were that cheap and that easy (ish) to replace. I greased all the moving parts on the 4 windows that I have with the same issue. It made them seal properly again, but if they start to leave a gap at the hinge end again, I will replace them myself. I was thinking I would have to get a window doctor type company in. Thanks for showing me I can do it myself.😊

[@froywhernside]

Yeah very simple. Saves calling out a "pro" 😁

[@aaronabbott2728]

Thank you for the video it is very helpful 👍🏻

[@buttonman6262]

Any idea how to get the top hinge off when the eaves are in the way?

[@froywhernside]

Unscrew from the frame first if you can access? Remove the window with hinges still attached.

[@pakirambo7]

Has this made a big difference to noise reduction? Because my room is next to a main road and the noise is driving me crazy since there’s a gap in the windows.

[@froywhernside]

Yes it did, also stopped the annoying wind whistle

[@wandalloyd2206]

Thank you, very well explained.

[@froywhernside]

Glad you liked it

[@lavonaffair]

i wonder if this is the same procedure with full door windows. Probably more involved for supporting the weight. I'll check when i get home. probably same principle though. Thanks a lot, much appreciated.

[@froywhernside]

The hinges would be much more heavy duty I'd guess, but yeah replacing the worn out hinges should be a similar process.

[@unda25]

What size lenght are the screws i have double glazed but old windows like 90s

[@froywhernside]

From memory about 20mm, best take one of yours out and measure it

[@frederickstevens6415]

first class instructions hope i can do my widow to your high standard

[@froywhernside]

Just don't drop it! 😁

[@dudmanjohn]

Nice job 👌

[@Davidl-ux5ke]

I do this job most days and unless its big top opener i just take them out glazed never dropped one yet 😁😁 A set of glass suckers can give you another thing hold onto when take it in and out

[@froywhernside]

Must be a good money maker, probably takes you about 10 mins 😁

[@isaacadams9290]

would it not be easier to replace the plastic bit instead?

[@froywhernside]

Yes but the cost of a new hinge is minimal for peace of mind

[@vinyltheif]

Just what I needed to see mate! Albeit not in the trade I fitted my windows ~ 16 years ago & one now has the same issue so I'll try the same screwfix hinge.

[@froywhernside]

Thanks, I always think if someone can do it, why can't I

[@phil.i.am2]

Another tip is that if you have the same window as on the first floor you can swap the hinges if they are better condition and then change the lower window hinges for the new, if they need more adjustment in situ , which can be the case such as mine seem to be. This I feel is safer option. Also I am thinking of removing the glass unit to help reduce weight in upper window too

[@froywhernside]

Removing the glass would be a good idea if on your own

[@tonybunner3725]

This Really helped😀😀 me ,had a window blow open in a storm and top of window would not catch on the keep ,did not have to replace the hinge ,just readjusted it and replaced the bent screws .

[@eriktz2326]

Thank you I'm working in maintenance and I was struggling for 1 hour how to change hinges Thank you perfect video nicely explained ✨️✨️✨️✨️✨️

[@BhimGurung-f8p]

very good tutorial. thanks. I might try too as my window has same problem.

[@froywhernside]

Just be careful when taking the window out... Heavy and awkward!

[@marcter1375]

why this black thingy on the hinge is made of plastic?and not something stronger like metal so itwould last longer.Got 2 windows replaced 1 year ago and having now just the same issue like in video. Great video

[@froywhernside]

Anything to keep manufacturing cost down I guess 😂 Thanks 👍

[@nickgrantley3879]

superb Froy ........... that is one of the clearest DIY vids ive seen and great links too - excellent

[@froywhernside]

Thank you! I tried to keep it simple. More on the way 👍

[@thomasroche212]

Always have a second set of hands lifting out or fitting back in window. Easy to do but can easy drop out when the last screw comes out

[@froywhernside]

Agreed 💯

[@mrlanguage1977bb]

Thanks for taking the time and effort to make this. People do tell you you sound like David walliams right?

[@froywhernside]

Not heard that one before but I'll take it 😂 Little Britain was incredible 😅

[@mohammeddulal1320]

I have aluminium frames. Will the process be the same

[@froywhernside]

More than likely yes, I'd take one screw out to check the type of screw needed and measure the hinge as normal.

[@paulvango]

The original hinges were easy egress hinges, and you have changed the hinge for a normal stay which is ok as long as it’s not a bedroom

[@froywhernside]

Exactly that. Probably best to fit egress everywhere thinking about it 👍

[@AdiCristea]

Why shouldn't be a bedroom, please?

[@paulvango]

@@AdiCristea in a bedroom the regulations are that you must have fire hinges on the sash so as to get maximum opening 90 degrees you can get a easy clean fire hinge which you can push over so you can clean the glass

[@kingofthetrowel1725]

@@paulvangoare you not allowed fit restricted fire hinges 🤔 I have a 3 storey house and top windows are the ones where you open it and the sash comes to the middle of the window then it clicks(no push button function)and the you can slide it left or right left to open fully..would that be classed as fire escape hinge? I need to replace them but can not find anywhere that type of hinge

[@rorygallen433]

Great walkthrough video

[@chrisross5976]

LEGEND!

[@froywhernside]

👊

[@charliegeorge.]

Big bonus being screws, use to be rivets one time! 😱 Yes always hold on to the frame as you slowly undo top hinge screws, the weight of the window can make it fall out! I don't use power tool on hinge screws, too easy for them to undo rapidly! Be safe and use screwdriver. Most importantly spray hinges, handles, moving lock parts twice year with silicone spray or WD 40 ,use the straw to spray into door lock barrels and window locks, they can and do seize up! Btw best to put new screws in those central hole position top and bottom, you didn't need the supplied packers to adapt new hinges then?

[@froywhernside]

I'd agree the impact gun will easily strip the plastic out, got to go easy as you say

[@rc-po3ns]

And what about window hinges with rivets

[@froywhernside]

Hmm, no idea to be honest, my DIY knowledge runs out. Possibly drill out the rivets and replace with screws but that sounds like a lot of hassle

[@juliabrown900]

what causing the hingis go like that? I have new windows and is already second time when this happened

[@froywhernside]

Hinges wearing out / poor quality hinges. Make sure the friction adjusters aren't too tight, the window should open and close easily but not so loose the wind slams the window. Might be worth checking your window frame is square and plumb in the opening, could be twisted which won't help but you'd probably have more problems if that were the case.

[@penman1289]

Why did you not take the glass out first. Its quite easy to put internal beaded glassed glass back at the end of fitting your window hinges?

[@froywhernside]

Saves time not taking the glass out. If it were bigger I would have 👍

[@penman1289]

@@froywhernside I mentioned taking out the glass because you said it would be easier with 2 people, I do understand if you did this for a living you need to save time, but not if you are a DIY person.

[@JohnnyMotel99]

small tip, don't fit the screw in the hole with no adjustment, then if the hinge needs adjustment you have the two oval holes for that. Then finally fix last screw in the middle hole.

[@froywhernside]

I'll check what I did, I think I used one hole that had no adjustment 👍

[@simonarcher7698]

Thanks, exactly what I needed to see before attempting this myself.

[@froywhernside]

Thanks, subscribe for more 😉😁

[@steverogers702]

My frame screw holes won’t catch the screw what do you recommend new holes drilled in the hinge

[@froywhernside]

Longer screws to catch material further down Bigger diameter screws Or like you can do with wood, find something to glue in the hole and then screw into it, a piece of plastic. I have seen previously people use wire, poke some stranded electrical wire in the hole and then screw into it, should grip fine if you use enough.

[@froywhernside]

If that doesn't work, I'd try and find a hinge where the screws holes are in different places

[@robertbarton4776]

Dry fit the new hinges to the frame first. Remove hinges and fit to window. You then know screws will be in correct position

[@froywhernside]

Thanks

[@phelimoneill2813]

Great video - Thank you as it was just what i needed to see to do this myself!

[@froywhernside]

Glad it helped 👍

[@johnmcnamara4846]

Brilliant video.

[@froywhernside]

Thank you 😁 More coming soon

[@davidbullock6444]

Brilliant, thank you.

[@donalobrien4756]

Great video. Very helpful. Thanks for doing it.

[@froywhernside]

Thank you 😁

[@OCD_Sparkies]

The struggle method is the only method!

[@michaelconnor8317]

Deglaze the sash, then take it out to fit the hinges, replace the sash then reglaze the sash. It's that simple when you do it for a living.

[@playlistsincheck-en2pq]

thanks Froy apprieciate the video

[@TheOldMan76]

Great video, thank you!

[@loui425]

Can you post a link to the hinges you bought mate?

[@froywhernside]

www.screwfix.com/p/mila-ideal-window-friction-hinges-side-hung-311mm-2-pack/7268g

[@eriktz2326]

Genius

[@eriktz2326]

@@froywhernside genius

[@matt23540]

I tried this on my window. It made no difference to the gap at the bottom of the window. I either did it wrong or the window frame is warped or something.

[@froywhernside]

Compare against another window, is the hinge in the wrong place, missing a rubber seal, etc?

[@kevingriffin2846]

Can I ask why you haven’t used fire engresshinges on replacement

[@froywhernside]

I just used whatever Screwfix had in stock at the time. Still enough room to climb through if needed 👍

[@kevingriffin2846]

So you can’t get out of window because Screwfix didn’t stock them building inspector want be happy

[@froywhernside]

As said, you can still get out fine if needed so nothing to be concerned about.

[@beikdw5762]

@@kevingriffin2846 To be honest, the windows look fine. All he needs to do is make sure that the escape width is 450mm if they were egress windows before. Those windows are quite wide as it is.

[@georgemoffat797]

@@froywhernside it’s not for escape it’s for easy cleaning ?

[@johnsammons3827]

Our builder drilled top of patio door frame for bump stops upper and lower. The top bumper stop leaks water. Where on earth is it getting in

[@froywhernside]

Does the door have a bead of silicone along the top and down the sides on the outside? Are there draining holes in the cill? What's above the door? Any gutters, pipes, roof?

[@woocksie1]

The old hinge openes less because of the cleaning mechanism... the metal bit which says PRESS. that is the difference Screw fix hinges are cheap stuff just installed the exact same today... let's see how long will last. Anyway is an easy fix.

[@froywhernside]

Certainly are cheap and cheerful. Any recommendations for good quality hinges?

[@woocksie1]

@@froywhernside As I said unfortunately I couldn't find any, I used the same Screwfix hopping that will last long enough. There might be some out there , but can't recommend ... sorry!

[@mrjackstrong5389]

What spec are those window seals ? Got the same and can’t find replacements

[@froywhernside]

Not a clue to be honest. Probably best to try and pop one out if they're not glued on?

[@Heisenberg0086]

I am trying to replace the hinges on a bathroom top hung window, however, the top screw hole which holds the hinge to the window had threaded a hole where the screw goes into the window. I think from using a drill rather than tightening manually by hand. Does anyone know of a fix around this other than replacing the window?

[@froywhernside]

Depends what you've got left to work with. Bigger gauge screw, different hinges with screw holes different locations, drill a new hole in the hinge, use some sort of threaded insert, pack the hole with plastic and epoxy then try again... One of those could work but depends how bad it is, how much weight it needs to hold, etc. Could be worth calling in a window repair person if not not sure

[@royboywales]

The plastic bit on the end is a built in failure device😄 they should be brass or alloy.

[@petethebeat48]

Mine are metal, I was wondering if the plastic was an inferior design (cheaper) or not. Thanks for clarifying my suspension 😊

[@ShaamoneHeeHee]

Just finished doing a hinge due to the metal flange cutting through the plastic bit and leaving the 5mm gap on the frame around that area. Easy job but annoying unnecessary due to a bad bit of design. Still, gave me a chance to get the tools out the shed 😊

[@icooper5236]

Cheap repair because you have cheaper hinges, side hung are either 12"" or 16"" the hinge you are taking out is egress easy clean so they open to 90 degrees and they slide that's why there was no centre screw it has an extra one in the corner. The height is known as the stack and it's either 13 mm or 17mm. Your new hinges won't slide

[@froywhernside]

Yeah exactly, I've added links in the description for those that need egress hinges 👍

[@keithbateman8489]

Thanks for this an confirmation that it really needs two people. One part that really confuses me: it a side hung opening, so both hinges are on the same side (top and bottom). The hinges are marked 'L' and 'R' for left and right. Both hinges would be on the left, or on or right.

[@froywhernside]

You have to have a left and a right hinge so when fixed 180 degrees to each other (top and bottom) they hinge the same way. If you had two left hinges for example, once fixed to the window they would hinge in opposite directions and you wouldn't be able to fix the window in the frame, let alone open it.

[@MickHealey]

One of the things I love about KZbin is that I can watch someone else struggle, so that I don't have to 🤣😂 Thank you for a great video. I'm lucky that my faulty first floor window can be accessed from the ground floor flat roof below. So, I'll go outside and hold the window, while Wifey does the business with a screwdriver from the inside.

[@froywhernside]

No point making it too easy for yourself 😁

[@jackychan7709]

Great video❤

[@froywhernside]

Thanks 😊

[@graham415]

No to mention you took off the old fire escape hinges and replaced them with non fire escape hinges on 1st floor window? The best way to do this type of job for one person is simply remove the glass it makes it so much easier , especially when it’s internally glazed.

[@froywhernside]

Great advice 👌

[@darkstarfuels]

If the hinges are serviceable, window sash cavity closing wedges are a 2 minute fix for this problem... just saying.

[@froywhernside]

No idea what that means but it sounds good 😁

[@darkstarfuels]

It means that if the hinges don't need replacing (ie they just need cleaning and lubing), you can buy 2 cheap parts for a few pounds (the wedges) and screw then in in 2 minutes and your problem is solved. No faffing about taking the window casement off etc. You might even want to make a video about it

[@michaelsummers5001]

Nice one thanks

[@froywhernside]

Thanks for watching 👊

[@rachelcohen4441]

Hi Froy. I tried to do it own my own. Yikes window far too heavy. Please could you help me change mind. I can't find anyone. I will pay. Please Please.

[@froywhernside]

Got a neighbour who could help? Best to search for an insured tradesman on Checkatrade, etc if you're struggling to find someone so you're covered if anything goes wrong

[@mac192]

Remove the glass first? Chisel along the bead and it pops off, remove the other 3 and remove the sealed unit.

[@dougieman765]

Thank you for this video

[@froywhernside]

Thanks for watching 👊

[@adamdewhurst2222]

Farts @ 1:05 😂

[@froywhernside]

I wish 💨💨

[@gosiakr8572]

I think your old hinges where easy clean fire escape one which opens 90 degree .These new one are okay but aren’t fire escape.

[@froywhernside]

Correct. They still open to 90 degrees and are big enough to climb out of in an emergency but fire escape hinges should be used.

[@Mike_5]

Guessing many people have this issue and have no idea what to do about it and don't want some clown coming in and charging them hundreds of pounds to do a simple job - Nice One 🙃

[@froywhernside]

It is simple, people should be brave and try 👍