Harry’s Holster Shorty (Sig Sauer P365, S&W M&P Shield Plus, Glock 43x)

Affiliate Link - bit.ly/3x6u7z6
🚫 No Firearms/Ammo Sales 🚫
2nd Channel: / @ohioedcgear
KZbin: / @steve-goff
Email: [e-mail]
Instagram: / steve_goff_youtube
Better Concealment With or without An Optic
Unlike other holsters, you can angle the Shorty from 0 to 30 degrees. So your gun will stay close to your body and keep you from printing.
The Shorty’s clip mount can be adjusted for cant and ride height(3/4 of an inch). Using a thin metal clip, the holster is less likely to print than holsters using bulky plastic clips.
Built In Wing to push the grip closer to your body
The built-in wing uses your belt to pull the gun’s grip close to your body. So you no longer have to worry about printing.
Easy On, Easy Off
There are no snag points on the holster, so it goes on and comes off easily. The clip is very secure, but a good technique makes it easy to use saving time.
Extremely Secure
The metal clip works great with a belt but will also hold to a sturdy waistband without one. So your clothing doesn’t dictate if you can carry your gun.
Red Dot Compatibility
The holster works with a red dot optic mounted to your gun.
Insanely Comfortable
Unlike other holsters, the Shorty is rounded to remove all sharp and poky edges. So it’s comfortable to carry all day long so you won’t leave your gun at home or in your vehicle.
Works With Your Suppressor Ready Pistols
This holster works with suppressor height sights and threaded barrels.
Easy To Adjust
The holster uses square nuts that fit in slots to keep the nuts from spinning-making adjusting the hardware extremely easy!
Features
Rounded Profile for Enhanced Comfort
Works With Slide Mounted Red Dots
0-30 degrees of Angle(Cant) Adjustment
Works With Suppressor Height Sights
Uses a Thin, Secure Metal Clip
Works Without A Belt(Waistband Must be Sturdy Enough To Support Weight)
Built In Wing for Better Concealment
Disclaimer:
Under no circumstances will Steve Goff be responsible or liable in any way for any content, including but not limited to, any errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in this video, whether by Steve Goff or a third party.

[@davidmcnear6434]

Thanks. You just sold me on this holster for my m&p shield plus.

[@DF-ec9de]

I have the shield plus myself , which holster did you go with and why? I need some help deciding.. Thanks

[@mv223]

@@DF-ec9de Shorty is the one in the video.

[@davidh7078]

Harry's holsters makes a great designed holster. Minimalist with excellent retention and concealment while being easy to get on and off. I have over 20 different holsters, and Harry's is my favorite.

[@Steve-Goff]

- thanks for watching and sharing your feedback. This was my first experience with them. I do wish I would’ve tried multiple different holsters from them to compare the differences but he wanted me to do this model specifically

[@AAA22323]

Thanks man! Came on here to see the sweat guard for the p365.

[@Steve-Goff]

- the Shorty is a solid option. I also really like the Profile from Tulster

[@silvermountainman2562]

I have 2 harry’s holsters. The rounded edges on the bottom, make them very comfortable, when sitting or bending. Great design …

[@Steve-Goff]

- I completely agree. There aren’t any sharp corners that create a hot spot. Very impressed with them

[@DF-ec9de]

Hello question for you, how long did it take to get your holster in once you ordered it ?

[@silvermountainman2562]

@@DF-ec9de About a week or so, as long as it’s in stock

[@DF-ec9de]

@@silvermountainman2562 Cool I just received mine today

[@gc641]

Yes they are excellent, got some expensive ones and so far I’m liking the Harry’s, still wearing it to verify….its a buy to me

[@Steve-Goff]

- he’s always innovating new holsters and designs. He’s a true gun guy and carries himself

[@christina5588]

Just watched the you tulster , which do you find more comfortable tulster profile plus or this? Subscribed....

[@Steve-Goff]

- thanks for subscribing. I honestly prefer the Profile+. It’s slightly smaller and just feels a little more comfortable. I would add the sidekick to the profile+

[@hardlifesurvivor4404]

So I have the original p365 but I switched the module to the xl module. My question is do I order the holter for a p365 or p365xl

[@Steve-Goff]

- I don’t want to steer you wrong but I’d order the regular p365. The xl grip module doesn’t change the slide length. Only the grip length which won’t impact the holster

[@hardlifesurvivor4404]

@@Steve-Goff that's what I figured thank you

[@jason200912]

7:50 for all the nuts shoving jokes

[@Steve-Goff]

- lol

[@tmears11]

shield plus is the way!

[@Steve-Goff]

- The Shield Plus has a fantastic grip, good sights, and better bore axis than the glock or sig. It is heavier though but only by a few ounces

[@LuckyDogGaming]

I appreciate the review but that shirt doesn’t show printing you could have a RPG under that shirt it’s so baggy! lol EDIT: you just pulled it tight, that helps some.

[@Steve-Goff]

- tfw and commenting. The shirt is what I would wear on any given day. I always wear loose fitting clothes

[@LuckyDogGaming]

@@Steve-Goff yeah not criticizing your fashion just saying the way you wear your shirt I don’t think anything would print, regardless of holster/gun size. The material isn’t touching you.

[@tmaddrummer]

Anyone have Harry's and a Tenicor for comparison? If so, pro's and con's. Thanks!

[@Steve-Goff]

- I don’t have the Tenicor. My daily carry is a Tulster Profile and I still prefer it over Harry’s. It’s just more comfortable for me

[@tmaddrummer]

@@Steve-Goff thanks!

[@Mike-4547]

@@Steve-Goff I stopped purchasing from other companies have strictly Tenicor, I have the Sagax Lux2 for my Glock 43x mos with a TLR-7 sub, the Velo5 for my Sig 365xl, a Sagax Lux2 for my Glock 19 with a TLR-7, last a ARX Lux OWB for my Glock 19, and a Tenicor Zero belt, but I also use a Kore belt, and a Blue Alpha. Tenicor has excellent customer support. A few years ago I tried Harry’s holsters horrible customer service, the holster was not what I expected, got so mad with them that I threw the holster in the trash not even joking.

[@nawmean]

Is this strong side compatible?

[@Steve-Goff]

- yes. Absolutely. It’s very comfortable in the 4 or 5 o’clock position. The adjustable cant really helps with purchase and draw

[@mv223]

Wish it was felt lined like the Safariland Species. Would be perfect then.

[@Steve-Goff]

- I have a few holsters that are kydex exterior and leather interior. I’ve had them for a few years and they were less than $30 from amazon and surprisingly pretty decent. I’ve done a couple of videos on them

[@cincinnatiking8008]

Are all 3 of those holsters V2's?

[@Steve-Goff]

- yes. All version 2

[@cincinnatiking8008]

@@Steve-Goff cool, I have the V1 Infiltrator for my CZ P-01, but I'm going to try a V2 Shorty for my Glock 43X. Thanks for the review!

[@jason200912]

That holster has veins on it

[@Steve-Goff]

- it’s a unique design but works really well