Haul System Climbing | 3 to 1 and 5 to 1 How To and Physics Behind it

This video shows how to set up a 3:1 and 5:1 haul system for climbing and also explains the physics behind the systems. This can be used for single pitch and multipitch climbing.
#hauling #climbing #amga

[@ZerolinGD]

This worked really well! I was able to haul my dad up the wall who weighs like 185 pounds pretty easily with the 5 to 1 system. Great that it uses stuff you usually already have on your harness.

[@rickkrause3198]

Great presentation, good explanation of the "T" method. One side note. You are not going to haul dead bodies with GriGri and Carabiners. The friction will kill you. The latest research is over a 90 degree edge, there is no mechanical advantage at all. This is for helping people climb not hauling them.

[@logan415]

Perfect video for what I was looking for! Thanks again!

[@AgataBcd]

I want to kiss your face for this tutorial, the twist with the GoPro really made it special, I felt like I was in you.🎉

[@mountainman4135]

This was an awesome refresh dude. thank you!

[@alexmartir1611]

this was great. thank you for taking the time and effort to make this video. please make more!!

[@summitseekersexperience]

For Sure, I'm trying to post at least once per week and sometimes more!

[@stuff2climb102]

another great and super informative video!

[@DVMCellini]

awesome as usual!

[@sanhanma8881]

Great video, started climbing outside several times, really a lot of fun. will bookmark this first, once I am capable to belay from top, this should be super useful.

[@summitseekersexperience]

Have fun! I have quite a few videos that you'll find useful as a new outdoor climber

[@Kravch96]

Thanks for the video! For a 5-1, could you also simply re-direct the brake strand through a pulley that is attached to the anchor, so you also pull down instead of up?

[@swashington942]

Thanks for sharing

[@summitseekersexperience]

for sure

[@yegermister1]

Hey that 5.9 you're standing over was my first rock climb. Allenbrook house

[@mattradcliffe9279]

Ok. If I have a microtraxion or other pulley on my harness, and want to make the 5:1 better. Should it be on the first stage with the brake strand through it, or the second stage with the cordlette through it? Obviously either one will work. I’m just curious if the system will improve with less friction on the part with low force and high travel or higher force and less travel.

[@summitseekersexperience]

I personally would use the microtraxion on the lower force prussik./

[@tiffany9831]

This is great thanks! Just to confirm would this work if belaying with an ATC guide?

[@summitseekersexperience]

The atc guide will add extra friction so it would be advisable to transition off that via mmo to a new 3:1 system… I think I show that in another video called “getting to baseline”… or something like that.

[@matthewnolden1886]

Great video! Can you show a 9 to 1 next?

[@summitseekersexperience]

9 to 1??? we'll be here all day watching me haul up one foot 🤣🤣

[@jakobtrock-jansen4741]

Would this work with an ATC on guide mode? Considering the friction

[@summitseekersexperience]

You can do a 3:1 in atc guide mode but will be overcoming significant friction… I have another video where I go to “baseline” and from there you can do any haul