HBI MOSSBERG 940 PRO BARREL CLAMP INSTALL VIDEO

[@alanobrien3138]

Thanks. I purchased one and should receive it before my gun I ordered arrives. It Will be installed before first shot.

[@gdvan01]

HBI with another win!

[@danielhess39]

Cool gadget 🤙🏽👍🏼

[@venomgt7299]

I just bought this also with the hb industries we stock.They make quality upgrades

[@hb_industries]

Thank you!

[@602Pinstriping]

What about 1301 tactical? Anything for Beretta????

[@hb_industries]

There are definitely other shotguns on our radar :-)

[@cobia224...]

Will this clamp also work with the Moss 930 security model?

[@hb_industries]

Yes, with the silicone gaskets installed on our clamp it should mount to your 930 security no problem

[@christopher7398]

Will this work on a 930 tactical/SPX?

[@hb_industries]

Yes, they are backwards compatible with 930 tac/spx models

[@venomgt7299]

I torqued my clamp to 50 inch pounds and it would not allow 7 shells to be loaded. Also the follower wouldn't return. I had to loosen to 22 inch lbs to fix the issue. Other then that, the clamp is Great!!!

[@tonycarthan6425]

Do NOT torque the screws to 50 inch lbs or 6 newton meters. This will cause the pusher in the magazine tube to bind. Use a locking compound and go just a bit past hand tight, about 4 to 5 in lbs. Just my experience.

[@venomgt7299]

Unfortunately I listened to the video. I ended torqueing to 20 inch pounds. I can still only load 6 2 3/4 shells. I may have to back it off anymore. Not sure how they came up with 50.😂😂

[@tonycarthan6425]

@@venomgt7299 That may not be the clamp causing your problem. My 940 will only take 6 and that was before the HB clamp was installed.

[@venomgt7299]

@@tonycarthan6425 mine took 7 before i installed. When i tightened to 50 inch lbs. Only 4. When loosened up to 20 inch lbs it took 6. I still haven't cleaned it so i know its not the spring installed improperly. Im going to try to loosen to 15inch lbs. Will see

[@bolriconyc3795]

100% CORRECT!!

[@rustynails75]

Did you have the binding issue with the original plastic mount as well? Mine with the original plastic one jams up the tube follower and spring if tightened to a usable torque, which is unfortunate. I've been looking for a solution.

[@bolriconyc3795]

EDIT THIS VIDEO ASAP!!!!!.... IF YOU TORQUE ANY CLAMP TO 50 INCH POUNDS ON ANY EXTENSION TUBE ALUMINUM OR POLYMER YOUR WILL WARP IT CAUSING YOU TO HAVE ISSUES WITH LOADING UP YOUR TUBES TO FULL CAPACITY!!!!