how to recover data from flash drive that got power surged

[@OldePhart]

Do you have a motorized tip cleaner ? is that the sound I hear when the iron goes off screen? Show that sometime, I'm old and I've never seen one.

[@fusseldieb]

I'm wondering this as well

[@dtiydr]

It is absolutely a motorized cleaner, they are so handy.

[@phmoffett]

Amazing work. Thanks for taking us along.

[@hddrecoveryservices]

Glad you enjoyed it

[@batman4e]

When you use the brush on the traces you should brush in parallel with the damaged trace, not perpendicular on it, as you may rip it off.

[@hddrecoveryservices]

Yep

[@fusseldieb]

Yep, he actually ripped the trace off when he brushed it.

[@adamw.8579]

10:00 Notning more annoying than incoming phone call when hads are full. I remember this from my service life... fortunately it's over now.

[@hddrecoveryservices]

haha so true

[@bogdanbogunovic3995]

The restoration work was performed very good as well as the video edit.

[@hddrecoveryservices]

Thank you very much!

[@baghdadiabdellatif1581]

Thank you. Great information about resistors combination for active banks. Great work 👌👏👍

[@hddrecoveryservices]

You are welcome

[@MkmeOrg]

Beauty fix. Some nice work right there.

[@hddrecoveryservices]

Thanks! Your donor should arrive tomorrow. Fingers crossed

[@filda2005]

here to keep the counter spinning, instead got excited to see next that ali board played out with resistors and what not, to make it work

[@jacobbay5708]

What soldering tips are you using in this video (and in general)? Great work

[@techknewz]

On ur patreon. Will u should a tutorial for a mac ssd?

[@rosariodagosto6484]

Rework station very quick great recovery 😊😊

[@ronlevin2339]

what do u use to clean the iron from excess solder, I can hear it on the background? Sometimes when a chip is fused to the board, I just dust it out with a small Dremel tool

[@hddrecoveryservices]

JBC junior tip cleaner

[@inothome]

Answered my question too! I heard it as well. Thanks!

[@iainstingemore4048]

Fantastic work mate.

[@hddrecoveryservices]

Thank you! Cheers!

[@Jesse-uu7ww]

Such a fantastic video! I love everything data recovery/replacement!

[@hddrecoveryservices]

Glad you liked it!

[@fevax]

I have a little recommendation, Knife blade soldering tips are much better for that kind of job, thanks for the great content!

[@hddrecoveryservices]

I know bro, thanks but I am all out of knives. Ordered a bunch of new tips and still waiting

[@peatmoss4415]

Says the "expert" that doesn't have any repair videos....

[@riderdan65]

Hi ! Log boost ! I love learning and you explain very well. Do you offer teaching ?

[@Derrick6162]

Enjoyed, Thanks for sharing.

[@mogwopjr]

alog boost! and a question ;) Can you recommend a good UV cure solder mask or adhesive like what you used to tack down the blown trace?

[@hddrecoveryservices]

I use Mechanic brand.

[@dmisi1]

how you clean the solder tip , we hear a sound when you do that.

[@superslammer]

I guess the bridged pins on the controller were ground? I kept watching for you to clear it but you never did and it stilled worked.

[@hddrecoveryservices]

2 pins are joined into same trace

[@eugrafcmg]

What is the motorized sound when you have too much solder on the tip?

[@hddrecoveryservices]

It's a tip cleaner. I will do a workbench review this weekend

[@MuhammadBilal-in9yw]

Hi sir my usb Kingston 64gb write protect issues solution

[@paultomlinson528]

Nice work mate

[@hddrecoveryservices]

Thanks 👍

[@kellyaubi8892]

awesome work

[@NapierNimbus]

Fascinating to watch.

[@hddrecoveryservices]

I appreciate it!

[@OldePhart]

Why go through the effort of replacing the pad ? Why not just jumper it? I imagine after the recovery this becomes a donor for the next job so why fix it so completely ?

[@hddrecoveryservices]

such a small area for jumper. I can do it, but frustration would be peaking.

[@OldePhart]

@@hddrecoveryservices Well yea.. that's what we watch for :) People dont watch NASCAR for the race, they watch for the wrecks . BTW I went to join your Patreon but the minimum was too much for my tax bracket. Need a smaller tier for those like me that don't care about getting something extra in return - Just wanted to support the effort you already make as much as we can.

[@abdodz94]

hey whats that device you use to refresh solder iron tip ?

[@hddrecoveryservices]

JBC Junior tip cleaner

[@peatmoss4415]

Outstanding!

[@Mizai]

and another one saved

[@briandesousacruz2201]

Oi aqui é o Brian queria saber o telefone de você pra mim poder enviar o meu pendrive

[@laidman2007]

Useful. Thanks.

[@hddrecoveryservices]

You're welcome!

[@dtiydr]

60GB USB flash??

[@rosariodagosto6484]

DO MORE QUICKER VIDS YOUR CLEVER 😊

[@akmal2291]

First like first view love you sirr❤❤❤❤

[@hddrecoveryservices]

You rock!

[@awilliams1701]

I've heard a lot of channels are losing views. Apparently the stupid ass shorts are taking over. I HATE shorts.

[@hddrecoveryservices]

Yeah, something is up for sure.

[@Mizai]

its because with normal videos you barely have a chance these days thats why alot of people upload shorts

[@awilliams1701]

@@Mizai shorts are pointless. They are a waste of time. I want real content. I love repairs. I love soldering. These videos here are ASMR for me.

[@inothome]

@@awilliams1701 100% agree on shorts!

[@dimassskin]

Как всегда класс!

[@hddrecoveryservices]

Спасибо Дим

[@VivekKumar-q9r9f]

Sir please repeyar my pen drive I am from india..