HE MADE THE CHANGE YOU ASKED FOR! Turbo S-10 Stuff + Sh!thorse Cam Bearing removal | Budget LS Build

[@billwilliams4394]

You are the ultimate on a budget hotrod fabricator, Your builds are real world Everyman builds with flair

[@bdd1469]

True, lots of guys never replace cam bearings. We call them hacks...I was a hack when I was young and didn't know any better. Cam bearings control oil pressure. You don't have to have good consistent oil pressure, but it helps..

[@raystevens687]

Hi Rob that 1956 chevy dashboard did you put that in your truck. I was considering doing that to my 1998 GMC SONOMA. Any advice would be cool 😎 thanks Ray in Idaho

[@s.v.gadder1443]

I think you should have put a little kicker inside on the bottom to kinda push the air up towards the turbo,if that makes sense? Idk just a thought

[@s.v.gadder1443]

No shit...... lmao it is called a suggestion a opinion fuck sakes

[@s.v.gadder1443]

I mean fuck I didn't blow up saying "oh that bull shit is never gonna work you fucked it up just burn it now" lmao

[@calebhurteau4230]

-6 is way to small bro you run -10 to really feed those injestor and not starve the fuel pump. Unless ur are running stock fuel system. Anyway awsome build bro!!

[@SPPTVarmy]

It has -8 feed and -6 return. Plenty for this combo

[@christopher3067]

I commented that idea on hot side fix! I'm sure others did as well, but cool to see that's what you went with!

[@brandonmurray4895]

Send it Rob! Great work👌🏾

[@KeithBrousseau]

Love your Videos I Am A Canadian Born Frenchman

[@soundslikealot]

Keep it up guys! Great content!

[@dlawson8993]

What type of wastegate do you guys use on your builds?

[@SPPTVarmy]

Clayton has a Turbonetics gate, Rob uses Precision on the Nova and China Lilly’s on The Shithorse and S10

[@blindabinda1234]

Another option for Wastegate positioning is to cut a hole right in the hot side of the turbo near the flange and put it there.

[@blindabinda1234]

You should either have a waste gate in each exhaust bank or have one bigger one after the Y. If not you might end up with a significant amount of boost creep that can cause some big problems.

[@gordiefrench5342]

thank you rob for your hard work on cool as hell rides merry christmas to you and the spptv team

[@superc4308]

Merry christmas guys shout out from the Cayman Islands

[@justinlawson5134]

nice job 100 percent better

[@fastcash9799]

What materiel are u using for your tirn down pipe ? Is it aluminum ?

[@SPPTVarmy]

The hotside and exhaust are mild steel the cold side is aluminum

[@earthtempcontrols5130]

I like all your content keep up the good work

[@akingtonone]

Cam bearings are never bad if you don't look at them.

[@lioneltrainzrock]

Phillip Snyder -Matt happel

[@jedclampett6466]

All this from his garage.

[@CrankAddict]

Your idea to smooth out that exhaust flow works. Good job thinking outside the box. I would've done it the hard way.

[@johnnDope]

📽 🎞 S10 pickup trucks are awesome!! 📽 🎞 Great video keep up the good work!📽 🎞

[@johndelta00]

Nice work, I love seeing what the actual expenses are. Looks like you guys have spent about 1800 usd so far, some folks spend that much on one turbo.

[@amandawoodley3749]

Good job ✌🏻

[@KeithBrousseau]

Love your Live Videos

[@hishayden06]

Might weld a couple of nuts on the outboard side of of the turbo flange. Getting under there to install/remove could be a pain in the ass.

[@whatyareckon5985]

You should move the wastegate closer to the turbo, as close as possibe.

[@OCALLARM]

That's a great price for a used ls engine. I'm in Michigan and I was pricing a used 6.0 aluminum block from a guy that parts out vehicles from an auction. He wanted $3500 usd for an 80,000 mile engine. How far are you from Sarnia?

[@OCALLARM]

Out of curiosity, Do you install an oil catch system on these turbo cars?

[@wheeln24-79]

Killing it Rob! This channel definitely deserves more subscribers! It's awesome to watch everyday people build fun stuff

[@gearheadhuff7853]

What size serpentine belt on 5.3 with out a/c? I'm deleting my a/c on my swap

[@SqueakyLynn311]

Did you have to gap your piston rings for the turbo?

[@velasquezdan8185]

Legit, one of the best automotive channels on youtube. No bullsh!it and straight to the point.

[@markmacewen6047]

How much did it cost for brokerage fee for the turbo to get it across the border ??

[@mariofrat5055]

Nothing..... you hide it under a seat!!!! LOL!!! Ask me how i know!!😉

[@markmacewen6047]

not when it's shipped

[@novaracer2000]

Mark MacEwen i had it shipped to the border and picked it up in the usa, so i only had to pay the taxes.

[@markmacewen6047]

Ok if your close to the border I'm 4 hours away

[@TheProchargedmopar]

Good work, Thanks for breakin' it down for us.

[@rehlek]

time for a new cam bud!

[@PHATDAN420x]

That much closer to making smoke!!!

[@grayghost1352]

Yess new cam bearings sloppy doesn't even do that those bearings are toast

[@ClassicRideSociety]

It looks good to me. 👍

[@vt2704]

Awesome. Mike how did you get fired? LOL.

[@SPPTVarmy]

+Alpha Ghost I've never been fired in my life.

[@aaronmohler9853]

Hey guys im planning on doing an LS swap do you know a cheaper way to do the wiring harness and computer all the kits I've seen are like a thousand bucks or more is there a way to wire up the stock one someone please help this has me stuck as i can't afford a thousand bucks!

[@novaracer2000]

Aaron Mohler all the info is on lt1swap.com I am using a stock harness and will make some videos of the wiring modifications

[@aaronmohler9853]

Thanks allot buddy

[@CaptnCall]

I reworked my harness into a stand alone and glad I did. The neutral safety switch and the gear position indicator switch like on a 4l60e aren't on the new harnesses that are out there. Lt1swap.com has all the information you need, you just have to know what your questions are.

[@Shadow0fd3ath24]

really all you do is buy a junkyard harness and take out the pins you dont need and rewrap it. really nice Standalones are available under $500 on ebay

[@FcDominick]

Looking at the cam bearings made them bad.

[@YetiSpeed]

You need to start a GoFundMe so we can get you a high quality camera!

[@rehlek]

agreed

[@SPPTVarmy]

+Special K I need to leave our main camera with Rob.

[@leeroy60]

Pretty sure rob uses his cell phone.

[@novaracer2000]

Ya i use my cell phone, i should probably clean the lens before recording it gets dusty in the garsge. Or use my gopro maybe?

[@kevinc9006]

Special K I like the one he's got

[@lastexitgarage1614]

Clayton is awesome. Keep up the awesome work Rob.

[@chrish8906]

Hell of a job brother keep up the hard work and a lot of play

[@slimelines4394]

Much better Rob your the man!!! Best garage Fab in Canada love the vidz Mike and Rob been a long time sub as you know glad to see the channel growing so steady and the editing is getting better and better the tutorials kick ass all around solid solid channel I see 100k soon Mike just hang in there keep doing what your doing bro

[@slimelines4394]

Naw the wastegate is just fine Rob that modding where they met deal is gonna make a difference though forsure looks damn good

[@MartinMcMartin]

Cheap Chinesium fuel hose! don't you think it's a bit risky on an injected engine?

[@grayghost1352]

Have you guys watched house of boost on KZbin

[@davidconley3610]

Add that to your resume Clayton. Master engine builder!

[@aaronmohler9853]

Love the channel buddy but you really gotta try not to move the camera around so much and so fast makes it really hard to watch makes you dizzy !

[@RedJackelProductions]

“He’s Michael Jackson” lmfao

[@dennislorden3142]

Hot side is fine, that merge would have worked fine, people always get nervous when ur exhaust "doesn't flow like a river" lol. nice work dude love the channel

[@kirstiecunningham4589]

Get a better camera and I will sub.

[@novaracer2000]

Kirstie Cunningham i think the camera Lens just gets dusty in the garage, i need to wipe it every shot. I did buy a new camera/ phone the other day. We shoot with a few different cameras.

[@lastexitgarage1614]

Thumbs up on the channel.

[@jaybranom4711]

$1783.13

[@waynebrogdon9628]

Not bad, I’ve paid people and got worse jobs

[@moneymac2864]

Noice

[@rustynut7750]

Hey Bob, very nice work with the turbo hot side. You should pick up 200 HP? because of less back pressure. As you known an engine is just an air pump. Happy Holidays.

[@austindoud273]

Hey Rob it would be nice if you showed more fab work love the channel keep it up

[@codypowers3856]

Love you daddy

[@hammerhead2558]

That's the good stuff! Makes it all worth while.

[@mariofrat5055]

Man..... best fab in Canada??? Im not sure i wanna be represented by this episode!!!! I mean, instead of putting that piece in there why not do it the right way . And hey, if it means starting over, THAT would be representing "best fab", not beeing afraid to re do it to make it the RIGHT way. I mean, what kind of an example is this..... seriously. +, i mean, its not like your in any rush!!! Cheap dont mean do it any fucking way!! Not bashing in anyway.... just a bit deceived by your attitude. Oh, and please stop moving the camera so fn fast!!!!!! LOL!!!!

[@novaracer2000]

Mario Frat we never said that and i have never claimed to be. Just a hack who builds junk.

[@mariofrat5055]

novaracer2000 i hear ya, but, after reading the comments, i was reffering /commenting after the ones below that did say that , sorry if it got you confused.

[@kevinc9006]

I'd say it will flow better ..but I'd bet money it might make a 2hp difference...or dragon power what my Honda makes👍😵

[@DrakeFeore]

1st XD