Head Gasket Replacement on a 200,000 Mile Subaru | Part 1

[@seashells4636]

Shootout to the video being 20:19 ... which is the year 🙂 its the little things that make ya smile

[@gregorylambert339]

The boxer engine actually got it's name because the movement of the pistons is similar to that of a boxers gloves.

[@lsxmatt]

Wow, never would have guessed. Makes sense though!

[@mmark8394]

Not like these dicks calling it horizontally opposed when there's only 1 crankshaft They sound smart when they spout that shit, silly boys,

[@Clearanceman2]

The trick is to use the MLM OEM turbo gaskets. I've seen them last over 200,000 miles. If you scratch the heads, they'll leak. If the heads aren't square, they'll leak. Felpro gaskets will eventually leak. That blue gasket material came off right? the MLM OEM turbo gaskets don't have any graphite or material layer they are all metal. You also don't need new bolts unless they are damaged.

[@stephensanders7581]

i have a 2012 outback 201xxx miles i just pickled up for 950$ with over heating issues. I have Idled the shit out of it no over heating ive driven it no over heating. But i do get bubbles in my overflow and or my rad. Its seems the head gasket has been replaced as it appears the have 3 layers on the gasket. I dont know too much but arent the oem on these single layer head gaskets? Final thing, if i am going to replace the head gasket what gasket do you recommend for a upgrade or replacement as i really dont know if some of the gaskets coming up on the web are good/bad/bulletproof as i do not want to revisit this anytime soon.

[@24revealer]

@@stephensanders7581 Anything I have read says to use the 3 layer head gaskets for the turbo engine.

[@levithrasher7417]

The NA ej's are stupid reliable aside from the headgasket issues. That and keeping up with the timing belts, they'll run forever!

[@veganpotterthevegan]

Aside from a sure thing failure, they'll run forever😂 *I have an NA EJ25. It'll be fine because it was rebuilt with a gasket Subaru used for the turbo EJs

[@13vex]

besides the two major components failing that can cause total breakdowns… it’s fine!

[@norevlimitr1602]

Try using distilled water with your coolant, keep the internal corrosion to a minimum.

[@PanzaFax]

Why did you torch the engine at 3:15?

[@SnivythePokemon]

It was the warm up the crank bolt allowing it to be easier to remove. I have to do the same thing to my 175k mile LS1. They can be tough to get off if they havent been taken off in a very long time.

[@drakevelazquez8728]

Just an opinion but I read those whiz wheels do work but they create divets or remove material in a non uniform way

[@2005SilverSTi]

You can get a new tensioner bracket also, in case you didn't want to do heli-coil thread replacement. I've stripped the threads out of that bracket on my car before too.

[@Anthony-Webb]

Keep kicking ass Matt

[@mt1885]

Very simple design, however everything today has to have GDI/VVT 25 timing chains, tensioners one looks at and they fall apart imploding the engine. Working at a Yamaha shop that design looks like a street bike engine from the 1980's!!! Except they were not horizontally opposed. The old BMW's were I remember some of them...

[@jebsails2837]

I had Subarus (1999 & 2003) for 15 years and will likely get another. The 2.5 does have cooling and head gasket problems, well known. My 2003, actually needed half the block (2 cyl.) replaced ( at 26,000 mi) due to a defective casting. Perhaps having the gauge readout on social media would help.

[@danconlan8735]

You are a good brother!

[@JulioTheGamer3]

Is the 2012-2017 STI afected by this problem? The engine of this Impreza is the EJ257

[@todaywithbk]

Great video!

[@anthonyr5869]

Dont use fail pros again..

[@mrphiscal]

Matt you drop two things in to video

[@arod8596]

How’s it holding on ?

[@mightywade27]

99% sure those are felpro head gaskets and that those head gaskets have been replaced before

[@BobPegram]

This ISN'T the well known 2.5 liter EJ head gasket defect then? Wouldn't the check engine light warn her of overheating?

[@lsxmatt]

Never got a check engine light, but the temp gauge was obviously reading hot. She never really noticed it though until it was already hot.

[@7Supernova7]

what year is the subaru?

[@DFPFTW]

HI Please Help ANYONE.. so just bought a 2001 subaru forester NAej251 5sp with 193k the head gasket passenger side is Sweaty Oily around the oil filter area. And driver side back right head gasket I'm leaking a little coolant onto my steer wrack. HOW MUCH longer do you think I have until it blows???? thank you

[@momanddadforeveryay3241]

You have some resemblance of Samcrac but with beard lol

[@jasonbamford7579]

If the head gaskets failed the first time on you why would you put the same failpro gaskets on it again ???? Run 6 star on turbo engines and factory subaru HG on all NA engine's.... subaru did fix the head gaskets problem of the past they are now MLS with a real good coating on them ....good luck bud

[@lsxmatt]

They lasted long enough to junk the car

[@jasonbamford7579]

@@lsxmatt please don't use felpro Head gaskets on any subaru boxer engine.use factory subaru Head gaskets . felpro make great gaskets for everything except subaru Head gaskets all there other gaskets are fine I use them for a lot of other parts and cam and crank also rear main seals all work just fine.

[@Allen-bm6tz]

Jason, I've got a 2006 NA Outback and the recommended factory HG is the A633 and it doesn't appear to be an MLS. It's a coated single layer but it is the 5th revision since the original A521. I bought the A642 but worried about using it cuz Subaru doesn't specify it and no dealer would recommend. Which gasket are you talking about? Thanks!

[@jasonbamford7579]

@@Allen-bm6tz on that year Subaru I use head gaskets from Subaru that's for same year Subaru from the Forester XT turbo engine .Since 1999 with no problems. My wife's 2001 subaru outback sedan. I JUST CHANGED THE OIL ON IT TODAY AND IT HAS 299,700 MILES ON IT. ALSO USE CASTROL NON SYNTHETIC OIL I USE 10 W 30 FOR THE WHOLE YEAR SUMMER AND WINTER. THAT'S WHAT WORKS FOR ME. ON SUBARU THAT ARE NEWER THAN 2010 USE SYNTHETIC BLEND CASTROL OIL. AND THE SUBARU FORESTER XT HG FROM SUBARU.....

[@matth.4932]

Felblow again??? SMH

[@ur_a_buS]

Lolz blue felpro head gaskets are shit. Stick with Subaru STI MLS gaskets.

[@jophillips2868]

Not a video to watch if you are trying to get information on head gasket replaced.

[@harileon717]

never buy a car with boxer engine... It is only for a mechanic, idiots like me is a disaster to own it.