Headlight Replacement & Modules BMW F10 | 550i, 535i, 528i (11-2016)

Welcome to our channel! In this video, we'll guide you through the process of replacing the headlight on a BMW F10. Whether you're looking to upgrade your headlights or simply need to replace a faulty one, we've got you covered.
In this step-by-step tutorial, we'll show you all the tools you'll need and walk you through the entire process, making it easy for you to follow along. We'll start by demonstrating how to safely remove the old headlight assembly, ensuring you don't damage any surrounding parts. Then, we'll guide you through the installation of the new headlight, ensuring a secure fit and proper alignment.
Replacing the headlight on your BMW F10 not only enhances the overall appearance of your vehicle but also improves visibility and safety on the road. Whether you're a DIY enthusiast or a beginner, this video is suitable for everyone looking to tackle this project.
If you have any questions or encounter any difficulties during the process, feel free to leave a comment below, and we'll be more than happy to assist you. Don't forget to subscribe to our channel for more BMW maintenance and upgrade tutorials. Now, let's get started with the headlight replacement on your BMW F10!"
Bumper Removal: • Bumper Replacement BMW...
Parts (Amazon Store):
- Left Headlight: amzn.to/3Ra6WuO
- Right headlight: amzn.to/3VpEdEK
- TMS Module: amzn.to/4bJ1g3g
- HID Ballast : amzn.to/3wZdLsq
- Turn Signal Modules: amzn.to/3Rdildv
- Angel Eyes (Halo rings) x2 : amzn.to/4e3WVJv
- Electronic Cleaner for corroded connectors: amzn.to/46oTnyf
Instagram: ...
Tiktok: / brownsburg.motorsports

[@edvinsroze5388]

Outstanding! Probably one of the very best youtube intructional videos I’ve seen! Very thorough and precise description and extra effort to make sure the Camera Angels are helpful. I’m about to do this procedure today, so I very much appreciate the effort you put into this. THANK YOU!

[@brownsburg.motorsports]

Thank you so much for watching! I am super glad the video was helpful!!

[@zaza181]

Very helpful to know I need to take it to a shop instead of doing it myself!😂

[@brownsburg.motorsports]

😂😂 if you get few tools from harbor freight you sure will be able too!!

[@SarahFamilyRVA]

This video is amazing. THANK YOU for taking the time to carefully explain each step. I am getting ready to replace LH headlight on a 2013 528i xDrive and will follow the process you have outlined here. If possible, please post links to aftermarket headlight and modules you have used in this video. Thanks again.

[@brownsburg.motorsports]

You are most welcome! I am happy the video was helpful! Text me on TikTok or instagram and I will find the links for you!

[@bruciekibbutz4698]

Hey, hope you’re still reading some comments. Very informative video, very much appreciated the thorough guide. My right side xenon is malfunctioning, it works when I start the car and then after a few minutes of driving shuts off, when I restart the car it’ll work again for a few mins and then shuts off again. Rest of lamp (blinker and angel eyes) work as intended. The adaptive headlight control (lights following steering) and xenon are malfunctioning and give errors on the dashboard. Which module would you think needs replacement?

[@brownsburg.motorsports]

I would say the Xenon module which is the square/rectangle looking module is the one that needs to be replaced! Seems like it works when the module is cold but when you turn on the light it heats up and turns off, most likely some water got in there I would pull it off first inspect it and go from there! Thank you for watching my video!!

[@bruciekibbutz4698]

@@brownsburg.motorsports thank you for your response, I have since then replaced the xenon bulb and all seems to be working fine. Haven’t had an error on my dashboard at all and the lights and adaptive functions as it should. I’m still a bit confused why a burnt out xenon bulb would case the adaptive lighting error, but atleast it’s fixed now. With xenon module I’m assuming you’re referring to the ballast?

[@brownsburg.motorsports]

@@bruciekibbutz4698 yes I Am! I am glad it’s working now!!

[@weathemj]

Thanks for the great video! Is it possible to replace only the turn signal module without removing the entire headlight?

[@brownsburg.motorsports]

Thank you 🙌🏽🙌🏽 I believe the headlight will have to be removed to gain access to the turn signal module ☹️

[@gutnick]

Impressive video! Thank you for publishing it. If the left turn signal, angel eye and/or headlight aiming system generate error message(s) every few months, does that mean there is moisture in the connector at the back? Is there any way to remove the water and seal it, without having to remove the bumper? Thank you..

[@stoltz330]

How’s it going , I have a 2015 550i and my front left headlight is giving me issues now. I had condesation in it and it worked then eventually stopped working. I’m trying to figure out if I need to replace the whole headlight or just the control module and maybe a bulb? I have a few codes but the adaptive headlight malfunction pops up first. My halos work but aren’t as bright as my other side? Any advice?

[@brownsburg.motorsports]

If you see condensation inside you have two options! Either you replace the headlight or rebuild yours as in take the front lenses off and reseal it! As for the modules I would recommend replacing all of them just so that you don’t have to do it twice!

[@victoriataylor7123]

Hello and thank you for your detailed and clear help! I have a 528xi 2013 bmw and I need to change the driver’s headlight. Would love to bring the car to you. Where are you located? Thank you!!!

[@brownsburg.motorsports]

Thanks a lot for your comment! We are located in Indianapolis IN message me on insta or TikTok for more details if you would like!

[@daniellekelly2634]

I need your assistance! I have a 2011 535i Xdrive when I first purchased from dealership the detail guy there had it for 2 days I go to pick it up the headlight was full of water broke the seal and they wouldn’t replace. My turn signal and daytime lights didn’t work. But high and low beam worked I had rats crawl into my engine chew through wires it was in the shop for 7 months. The driver headlight with issues now no lights work but my right side headlight that has no issues all the lights work but the right side turn signal isn’t working either. The turn signal lights up but idk if it’s a bulb issue or module would I be able to send you pics and u let me know what my options are! Ik for sure I need a new driver headlight but all the lights work on the other and the seals are still good. Is there any more parts I need to order for the headlight then what’s linked below in the description?

[@brownsburg.motorsports]

Sorry to hear that 🥲 that sounds like so much especially with the chewed up wires and Sure contact me on insta or TikTok

[@fishon111111]

Hi tnx for the guide.I was having a mayor problem with the angel eyes modules small connector how to get it out. I still dont know how to get it out, i massacred it to get it out. Fortunetly all is working.

[@brownsburg.motorsports]

Sure glad the video was helpful! Thanks for watching! And ye strode connectors can be a pain 🥲

[@carlosybarra4841]

Do the 2 angel eye modules and turn signal module require some type of water tight sealant before installation?

[@brownsburg.motorsports]

They should come pre-sealed with a gasket on em otherwise you can use automotive silicone

[@heatherhoyt3922]

Can I ask whatidule controls turning the lights left and right as I drive?

[@brownsburg.motorsports]

The lights turning right and left as you’re turning the steering wheel are called AFS or Adaptive lights the one in the video is adaptive but be aware that some models didn’t come with AFS/ Adaptive feature

[@heatherhoyt3922]

@@brownsburg.motorsports I have a 2012 bmw 535i and the adaptive headlight malfunction light keeps going off and on. When it goes on the lights don't turn left and right. When the light goes off they work fine. I was getting moisture in the driver's light but I figured out the access door was open and I closed it. The malfunction light was just going on when moisture was in there and it would dry and be fine . Now it just going off and on. Id love to know what controls left and right turning so I could pin point and fix the issue.

[@brownsburg.motorsports]

@@heatherhoyt3922 so the issue with this is the TMS module getting moisture on it and burning out unfortunately even if you replace the TMP and replaced the seals on the headlight the internal connectors are the ones that gets corroded and eventually short out which will cause the issue you have. I have seen so many symptoms and it’s definitely worth it to just replace the headlight with the modules

[@MASTERMIKEEE]

How did you clean that corroded power cable?? Mine is very corroded, and I’m scared to reuse it without cleaning or replacing it!!

[@brownsburg.motorsports]

@@MASTERMIKEEE I just added the link in the description for what I recommend using! Any electronic cleaner you can pick at the local parts store or from Amazon, spray it on the connector let it sit for 3-5 seconds and brush it with a tooth brush then run some air through it with an air gun or spray to dry it off and get the corrosion off

[@MASTERMIKEEE]

@@brownsburg.motorsports It’s okay to clean with a brush as long as the battery is disconnected? Also was your fuse blown? My corrosion looked just like yours.

[@brownsburg.motorsports]

@@MASTERMIKEEE yes you do all that with a disconnected battery! My fuse was intact 🙌🏽

[@MASTERMIKEEE]

@@brownsburg.motorsports ok check this out - put everything together and the corroded side still didn’t work!! After hours of troubleshooting, I realized the left and right assembly’s have the same power connection; just inverted. So I connected the (known good) right side assembly to the (unknown/not working) left power plug. It worked!! This seems to confirm that the new headlight assembly is not working, right? And then to double check, I tried the (apparently broken) assembly on the good power cable, and it still did not work! Planning to return it and get a replacement.

[@brownsburg.motorsports]

@@MASTERMIKEEE nice troubleshooting steps 🙌🏽 did you replace the TMS or just the assembly? TMS could also be the culprit I have ran into that before 🥲 you could swap the TMS from the good headlight that’s working to the one that seems to not be working and test again on the side with the corroded plug and see if it works if it still doesn’t the get a replacement but If it does work then get a new TMS just make sure they have the same amount of prongs because there are multiple ones!

[@edvinsroze5388]

On my original Head Light there is some gooey gasket materiālu around the base of the halo module. I noticed that when you installed the halo module, there was no such gasket. Is that Ok? Or should I be sealing it somehow?

[@brownsburg.motorsports]

The halo module should have a rubbery white gasket that comes with it if yours doesn’t have it I would recommend sealing by either getting the gasket online or with some Windshield Gasket sealant, apply it around the module and then install it but would definitely recommend getting the new gasket for it instead

[@brownsburg.motorsports]

Also the gasket on the Halo module should on the inside if that makes sense so around the inner bean where the led dots are placed

[@edvinsroze5388]

@@brownsburg.motorsports Awesome. Thank you - I was trying to reuse the original, but decided to just order all new components like you did!

[@brownsburg.motorsports]

@@edvinsroze5388 that’s awesome! Definitely the right way of doing it!

[@TimIsacco-jz8nf]

i have a 2015 528i xenon adaptive headlights, i have to replace both. Can your friend give the web page of ordering parts for 1,700 that included all the modules. I cannot find part numbers for the angel eye modules, turn signal modules.

[@brownsburg.motorsports]

Message me on insta or TikTok and I will see what I can do to help 😊

[@TheShotsie1]

How much $ was the new headlight?

[@tomsmith9354]

Low end $1000

[@battersf4153]

Does a snap on scanner work to initialize??

[@brownsburg.motorsports]

Yes it should be under hot functions

[@markbreslin4320]

Is the tms module that ones that controls the led turn signals?

[@brownsburg.motorsports]

TMS Module is what controls everything except low beam and high beam!

[@michaelbruder7166]

do you have links for the aftermarket parts?

[@brownsburg.motorsports]

Dm on instagram or TikTok!

[@ImStep-by-Step]

I’m going to use the old parts hoping to avoid having to reset. It’s been the hardest part at this point. That gooey sealant is a pain.

[@ImStep-by-Step]

I’ll add the condensation on the old one was the culprit but cleaned up the connector - fingers crossed

[@brownsburg.motorsports]

@@ImStep-by-Step if you use all new modules but using the same TMS you shouldn’t need to program anything, programming/initialization is only needed if you replace the TMS

[@brownsburg.motorsports]

@@ImStep-by-Step hope it works for you 🤞🏽🤞🏽

[@ImStep-by-Step]

@@brownsburg.motorsports thanks! Had to pause and order new HID - appreciate the info too!! Great channel

[@brownsburg.motorsports]

@@ImStep-by-Step alright!!! Hope it works well for y’a if you have other questions feel free to reach me on TikTok or instagram! Thanks for watching!

[@miguelquintana8076]

Do i need to change out componentshow much do people charge to program the brain

[@brownsburg.motorsports]

it only needs basic programming any shop can do it and it shouldn’t more than 150 at most!! It’s literally a basic hot function for the headlight autel scanner does it even the cheaper ones that runs 300/400 dollars

[@GSXRJAY]

I have a 2012 bmw 528i xdrive and my whole driver side headlight is out. Nothing works not even blinker. I just replaced the bulb and still nothing. Do you have any idea? Thank you

[@brownsburg.motorsports]

If nothing working then I would check the power coming at the connector and I would check also for any corrosion on the connector it self!

[@GSXRJAY]

@@brownsburg.motorsports by “connector” do you mean the control module?

[@brownsburg.motorsports]

@@GSXRJAY on the back of the headlight there is a connector like a plug basically, plugs into the back or the headlight distributes power to the bulbs and module inside the headlight, take a look at it and see if it has any whitish blueish reside, connecter should be rectangle

[@emirkhosrowshahi8022]

I just installed aftermarket assemblies and nothing in them works, so obviously they need to be programmed. I called everywhere and they all say they can’t do it so do you know what scanner I need to use to program/initialize them? Thanks

[@brownsburg.motorsports]

Sorry to hear that 🥲 autel Maxisys Will be the scanner to do the job!

[@Bossy23]

​@@brownsburg.motorsports I recently replaced mine too but the highbeam and the angel eyes don't work, does it have to do with initialize? Low beam is fine

[@brownsburg.motorsports]

@@Bossy23 yes initialization is an important step to make sure everything is working properly!

[@ZX7mcm]

This problem just happened to my 2016 535. $2500!!! Yikes!!

[@ZX7mcm]

And note to self…. Keep the car in the garage in the winter, dummy!!!!

[@SarahFamilyRVA]

This video is amazing. THANK YOU for taking the time to carefully explain each step. I am getting ready to replace LH headlight on a 2013 528i xDrive and will follow the process you have outlined here. If possible, please post links to aftermarket headlight and modules you have used in this video. Thanks again.

[@brownsburg.motorsports]

Thank you so much!! If you could text me on TikTok or instagram I can try and get you the links if they’re still available or help you look for the right ones!